Patients with neck pain demonstrate reduced electromyographic activity of the deep cervical flexor muscles during performance of the craniocervical flexion test

Study Design. Cross-sectional study. Objective. The present study compared activity of deep and superficial cervical flexor muscles and craniocervical flexion range of motion during a test of craniocervical flexion between 10 patients with chronic neck pain and 10 controls. Summary of Background Data. Individuals with chronic neck pain exhibit reduced performance on a test of craniocervical flexion, and training of this maneuver is effective in management of neck complaints. Although this test is hypothesized to reflect dysfunction of the deep cervical flexor muscles, this has not been tested. Methods. Deep cervical flexor electromyographic activity was recorded with custom electrodes inserted via the nose and fixed by suction to the posterior mucosa of the oropharynx. Surface electrodes were placed over the superficial neck muscles ( sternocleidomastoid and anterior scalene). Root mean square electromyographic amplitude and craniocervical flexion range of motion was measured during five incremental levels of craniocervical flexion in supine. Results. There was a strong linear relation between the electromyographic amplitude of the deep cervical flexor muscles and the incremental stages of the craniocervical flexion test for control and individuals with neck pain ( P = 0.002). However, the amplitude of deep cervical flexor electromyographic activity was less for the group with neck pain than controls, and this difference was significant for the higher increments of the task ( P < 0.05). Although not significant, there was a strong trend for greater sternocleidomastoid and anterior scalene electromyographic activity for the group with neck pain. Conclusions. These data confirm that reduced performance of the craniocervical flexion test is associated with dysfunction of the deep cervical flexor muscles and support the validity of this test for patients with neck pain.

Web-based screening and brief intervention for hazardous drinking: a double-blind randomized controlled trial

Background Strong evidence exists for the efficacy of screening and brief intervention for reducing hazardous drinking. However, problems have been highlighted with respect to its implementation in health-care systems, not least of which is a reluctance of some doctors to discuss alcohol proactively with their patients. Aims To determine the efficacy of a novel web-based screening and brief intervention (e-SBI) to reduce hazardous drinking. Design A double-blind randomized controlled trial. Setting A university student health service. Participants A total of 16 7 students (17-26 years) were recruited in the reception area and completed a 3-minute web-based screen including the Alcohol Use Disorder Identifiation Test (AUDIT) questionnaire. Of these, 112 tested positive, and 104 (52 females) who consented to follow-up were included in the trial. Measurements Drinking frequency, typical occasion quantity, total volume, heavy episode frequency (females > 80 g ethanol, males > 120 g ethanol), number of personal problems, an academic problems score. Intervention Participants were randomized to 10-15 minutes of web-based assessment and personalized feedback on their drinking (intervention, n = 5 1) or to a leaflet-only control group (n = 5 3). Findings Mean baseline AUDIT scores for control and intervention groups were 16.6 (SD = 6.0) and 16.6 (SD = 5.7). At 6 weeks, participants receiving e-SBI reported significantly lower total consumption (geometric mean ratio = 0.74; 9 5 % confidence interval: 0.56-0.96), lower heavy episode frequency (0.63; 0.42-0.92) and fewer personal problems (0.70; 0.54-0.91). At 6 months personal problems remained lower (0.76; 0.60-0.97), although consumption did not differ significantly. At 6 months, academic problems were lower in the intervention group relative to controls (0.72; 0.51-1.02). Conclusions e-SBI reduced hazardous drinking among university students, to an extent similar to that found for practitioner-delivered brief interventions in the general population. e-SBI offers promise as a strategy to reduce alcohol-related harm in a way that is non-intrusive, appealing to the target group, and capable of being incorporated into primary care. Research is required to replicate the findings, to determine the duration of intervention effects, and to investigate the mechanisms by which the intervention operates.

The International Consortium on Mental Health Policy and Services: objectives, design and project implementation

The concept of the burden of disease, introduced and estimated for a broad range of diseases in the World Bank report of 1993 illustrated that mental and neurological disorders not only entail a higher burden than cancer, but are responsible, in developed and developing countries, for more than 15% of the total burden of all diseases. As a consequence, over the past decade, mental disorders have ranked increasingly highly on the international agenda for health. However, the fact that mental health and nervous system disorders are now high on the international health agenda is by no means a guarantee that the fate of patients suffering from these disorders in developing countries will improve. In most developing countries the treatment gap for mental and neurological disorders is still unacceptably high. To address this problem, an international network of collaborating institutions in low-income countries has been set up. The establishment and the achievements of this network-the International Consortium on Mental Health Policy and Services-are reported. Sixteen institutions in developing countries collaborate (supported by a small number of scientific resource centres in industrialized nations) in projects on applied mental health systems research. Over a two-year period, the network produced the key elements of a national mental health policy; provided tools and methods for assessing a country's current mental health status (context, needs and demands, programmes, services and care and outcomes); established a global network of expertise, i.e., institutions and experts, for use by countries wishing to reform their mental health policy, services and care; and generated guidelines and examples for upgrading mental health policy with due regard to the existing mental health delivery system and demographic, cultural and economic factors.

The functions of societies and the evolution of group living: Spider societies as a test case

Many models have been advanced to suggest how different expressions of sociality have evolved and are maintained. However these models ignore the function of groups for the particular species in question. Here we present a new perspective on sociality where the function of the group takes a central role. We argue that sociality may have primarily a reproductive, protective, or foraging function, depending on whether it enhances the reproductive, protective or foraging aspect of the animal's life (sociality may serve a mixture of these functions). Different functions can potentially cause the development of the same social behaviour. By identifying which function influences a particular social behaviour we can determine how that social behaviour will change with changing conditions, and which models are most pertinent. To test our approach we examined spider sociality, which has often been seen as the poor cousin to insect sociality. By using our approach we found that the group characteristics of eusocial insects is largely governed by the reproductive function of their groups, while the group characteristics of social spiders is largely governed by the foraging function of the group. This means that models relevant to insects may not be relevant to spiders. It also explains why eusocial insects have developed a strict caste system while spider societies are more egalitarian. We also used our approach to explain the differences between different types of spider groups. For example, differences in the characteristics of colonial and kleptoparasitic groups can be explained by differences in foraging methods, while differences between colonial and cooperative spiders can be explained by the role of the reproductive function in the formation of cooperative spider groups. Although the interactions within cooperative spider colonies are largely those of a foraging society, demographic traits and colony dynamics are strongly influenced by the reproductive function. We argue that functional explanations help to understand the social structure of spider groups and therefore the evolutionary potential for speciation in social spiders.

Motivations for group membership: The role of subjective importance and uncertainty reduction

An experiment was conducted to investigate the idea that an important motive for identifying with social groups is to reduce subjective uncertainty, particularly uncertainty on subjectively important dimensions that have implications for the self-concept (e.g., Hogg, 1996; Hogg & Mullin, 1999). When people are uncertain on a dimension that is subjectively important, they self-categorize in terms of an available social categorization and, thus, exhibit group behaviors. To test this general hypothesis, group membership, task uncertainty, and task importance were manipulated in a 2 x 2 x 2 between-participants design (N = 128), under relatively minimal group conditions. Ingroup identification and desire for consensual validation of specific attitudes were the key dependent measures, but we also measured social awareness. All three predictions were supported. Participants identified with their group (H1), and desired to obtain consensual validation from ingroup members (H2) when they were uncertain about their judgments on important dimensions, indicating that uncertainty reduction motivated participants towards embracing group membership. In addition, identification mediated the interactive effect of the independent variables on consensual validation (H3), and the experimental results were not associated with an increased sense of social awareness and, therefore, were unlikely to represent only behavioral compliance with generic social norms. Some implications of this research in the study of cults and totalist groups and the explication of genocide and group violence are discussed.

Using the floatability characterisation test rig for industrial flotation plant design

Industrial flotation plant design is a complex process involving many aspects, one of which is the use of pilot-scale plants to test industrial plant flow sheets. Once test work on a pilot-scale has been performed, scale-up of these results to the full-scale plant must be performed. This paper describes scale-up test work performed on the Floatability Characterisation Test Rig (FCTR). The FCTR is a self-contained, highly instrumented mobile pilot plant designed to determine flotation model parameters and to develop and validate flotation plant modelling, scale-up and simulation methodologies.

Future Engineers Australia Management Project: Turning high school students into engineering entrepreneurs

There has been a strong move towards entrepreneurial education in high schools and at universities over the past few years. This has been echoed by a call from state governments around Australia to promote enterprise thinking and education in high schools. It also parallels the push within engineering to learn across the traditional boundaries , particularly between engineering and business. To meet this call, The Engineering Link Group (TELG) developed the Future Engineers Australia Management Project (FEAMP) in 2003. The project is based around Enterprise Education, and was inspired by the Smallpeice Year 12 Engineering Management course in the UK. The idea was to take high school students in years 11 and 12 and turn them into ‘engineering entrepreneurs’. This paper presents the design, development and evaluation of FEAMP as a five day residential course for year 11 and 12 students who want to learn more about being entrepreneurs and managers. It is a hands-on activity where the students invent, develop and sell an engineering concept to venture capitalists and ultimately to customers at a trade fair. It has been run successfully for two years, going from strength to strength. © 2005, Australasian Association for Engineering Education

Strategic group theory:review, examination and application in the UK pharmaceutical industry

Purpose – The purpose of this paper is to consider the current status of strategic group theory in the light of developments over the last three decades. and then to discuss the continuing value of the concept, both to strategic management research and practising managers. Design/methodology/approach – Critical review of the idea of strategic groups together with a practical strategic mapping illustration. Findings – Strategic group theory still provides a useful approach for management research, which allows a detailed appraisal and comparison of company strategies within an industry. Research limitations/ implications – Strategic group research would undoubtedly benefit from more directly comparable, industry-specific studies, with a more careful focus on variable selection and the statistical methods used for validation. Future studies should aim to build sets of industry specific variables that describe strategic choice within that industry. The statistical methods used to identify strategic groupings need to be robust to ensure that strategic groups are not solely an artefact of method. Practical implications – The paper looks specifically at an application of strategic group theory in the UK pharmaceutical industry. The practical benefits of strategic groups as a classification system and of strategic mapping as a strategy development and analysis tool are discussed. Originality/value – The review of strategic group theory alongside alternative taxonomies and application of the concept to the UK pharmaceutical industry.

The detection and identification of extraneous metals in material conveyance systems

The aim of this work was to design and build an equipment which can detect ferrous and non-ferrous objects in conveyed commodities, discriminate between them and locate the object along the belt and on the width of the belt. The magnetic induction mechanism was used as a means of achieving the objectives of this research. In order to choose the appropriate geometry and size of the induction field source, the field distributions of different source geometries and sizes were studied in detail. From these investigations it was found the square loop geometry is the most appropriate as a field generating source for the purpose of this project. The phenomena of field distribution in the conductors was also investigated. An equipment was designed and built at the preliminary stages of thework based on a flux-gate magnetometer with the ability to detect only ferrous objects.The instrument was designed such that it could be used to detect ferrous objects in the coal conveyors of power stations. The advantages of employing this detector in the power industry over the present ferrous metal electromagnetic separators were also considered. The objectives of this project culminated in the design and construction of a ferrous and non-ferrous detector with the ability to discriminate between ferrous and non-ferrous metals and to locate the objects on the conveying system. An experimental study was carried out to test the performance of the equipment in the detection of ferrous and non-ferrous objects of a given size carried on the conveyor belt. The ability of the equipment to discriminate between the types of metals and to locate the object on the belt was also evaluated experimentally. The benefits which can be gained from the industrial implementations of the equipment were considered. Further topics which may be investigated as an extension of this work are given.

Web based expert elicitation of uncertainties in environmental model inputs

When constructing and using environmental models, it is typical that many of the inputs to the models will not be known perfectly. In some cases, it will be possible to make observations, or occasionally physics-based uncertainty propagation, to ascertain the uncertainty on these inputs. However, such observations are often either not available or even possible, and another approach to characterising the uncertainty on the inputs must be sought. Even when observations are available, if the analysis is being carried out within a Bayesian framework then prior distributions will have to be specified. One option for gathering or at least estimating this information is to employ expert elicitation. Expert elicitation is well studied within statistics and psychology and involves the assessment of the beliefs of a group of experts about an uncertain quantity, (for example an input / parameter within a model), typically in terms of obtaining a probability distribution. One of the challenges in expert elicitation is to minimise the biases that might enter into the judgements made by the individual experts, and then to come to a consensus decision within the group of experts. Effort is made in the elicitation exercise to prevent biases clouding the judgements through well-devised questioning schemes. It is also important that, when reaching a consensus, the experts are exposed to the knowledge of the others in the group. Within the FP7 UncertWeb project (http://www.uncertweb.org/), there is a requirement to build a Webbased tool for expert elicitation. In this paper, we discuss some of the issues of building a Web-based elicitation system - both the technological aspects and the statistical and scientific issues. In particular, we demonstrate two tools: a Web-based system for the elicitation of continuous random variables and a system designed to elicit uncertainty about categorical random variables in the setting of landcover classification uncertainty. The first of these examples is a generic tool developed to elicit uncertainty about univariate continuous random variables. It is designed to be used within an application context and extends the existing SHELF method, adding a web interface and access to metadata. The tool is developed so that it can be readily integrated with environmental models exposed as web services. The second example was developed for the TREES-3 initiative which monitors tropical landcover change through ground-truthing at confluence points. It allows experts to validate the accuracy of automated landcover classifications using site-specific imagery and local knowledge. Experts may provide uncertainty information at various levels: from a general rating of their confidence in a site validation to a numerical ranking of the possible landcover types within a segment. A key challenge in the web based setting is the design of the user interface and the method of interacting between the problem owner and the problem experts. We show the workflow of the elicitation tool, and show how we can represent the final elicited distributions and confusion matrices using UncertML, ready for integration into uncertainty enabled workflows.We also show how the metadata associated with the elicitation exercise is captured and can be referenced from the elicited result, providing crucial lineage information and thus traceability in the decision making process.

The molecular design of a new solvent for the absorption of carbon dioxide

Gas absorption, the removal of one or more constitutents from a gas mixture, is widely used in chemical processes. In many gas absorption processes, the gas mixture is already at high pressure and in recent years organic solvents have been developed for the process of physical absorption at high pressure followed by low pressure regeneration of the solvent and recovery of the absorbed gases. Until now the discovery of new solvents has usually been by expensive and time consuming trial and error laboratory tests. This work describes a new approach, whereby a solvent is selected from considerations of its molecular structure by applying recently published methods of predicting gas solubility from the molecular groups which make up the solvent molecule. The removal of the acid gases of carbon dioxide and hydrogen sulfide from methane or hydrogen was used as a commercially important example. After a preliminary assessment to identify promising moecular groups, more than eighty new solvent molecules were designed and evaluated by predicting gas solubility. The other important physical properties were also predicted by appropriate theoretical procedures, and a commercially promising new solvent was chosen to have a high solubility for acid gases, a low solubility for methane and hydrogen, a low vapour pressure, and a low viscosity. The solvent chosen, of molecular structure Ch3-COCH2-CH2-CO-CH3, was tested in the laboratory and shown to have physical properties, except for vapour pressures, close to those predicted. That is gas solubilities were within 10% but lower than predicted. Viscosity within 10% but higher than predicted and a vapour pressure significantly lower than predicted. A computer program was written to predict gas solubility in the new solvent at the high pressures (25 bar) used in practice. This is based on the group contribution method of Skold Jorgensen (1984). Before using this with the new solvent, Acetonyl acetone, the method was show to be sufficiently accurate by comparing predicted values of gas solubility with experimental solubilities from the literature for 14 systems up to 50 bar. A test of the commercial potential of the new solvent was made by means of two design studies which compared the size of plant and approximate relative costs of absorbing acid gases by means of the new solvent with other commonly used solvents. These were refrigerated methanol(Rectisol process) and Dimethyl Ether or Polyethylene Glycol(Selexol process). Both studies showed in terms of capital and operating cost some significant advantage for plant designed for the new solvent process.

FlexSIG-Flexible software inspection groupware

The objective of this research is to design and build a groupware system which will allow members of a distributed group more flexibility in performing software inspection. Software inspection, which is part of non-execution based testing in software development, is a group activity. The groupware system aims to provide a system that will improve acceptability of groupware and improve software quality by providing a software inspection tool that is flexible and adaptable. The groupware system provide a flexible structure for software inspection meetings. The groupware system will extend the structure of the software inspection meeting itself, allowing software inspection meetings to use all four quadrant of the space-time matrix: face-to-face, distributed synchronous, distributed asynchronous, and same place-different time. This will open up new working possibilities. The flexibility and adaptability of the system allows work to switch rapidly between synchronous and asynchronous interaction. A model for a flexible groupware system was developed. The model was developed based on review of the literature and questionnaires. A prototype based on the model was built using java and WWW technology. To test the effectiveness of the system, an evaluation was conducted. Questionnaires was used to gather response from the users. The evaluations ascertained that the model developed is flexible and adaptable to the different working modes, and the system is capable of supporting several different models of the software inspection process.

Services for activities in group editing 'sage'

The project described in this thesis investigates the needs of a group of people working cooperatively in an OSI environment, and recommends tools and services to meet these needs. The project looks specifically at Services for Activities in Group Editing, and is identified as the `SAGE' project. The project uses case studies to identify user requirements and to determine common functionalities for a variety of group editing activities. A prototype is implemented in an X.400 environment to help refine user requirements, as a source of new ideas and to test the proposed functionalities. The conceptual modelling follows current CCITT proposals, but a new classification of group activities is proposed: Informative, Objective and Supportive application groups. It is proposed that each of these application groups have their own Service Agent. Use of this classification allows the possibility of developing three sets of tools which will cover a wide range of group activities, rather than developing tools for individual activities. Group editing is considered to be in the Supportive application group. A set of additional services and tools to support group editing are proposed in the context of the CCITT draft on group communication, X.gc. The proposed services and tools are mapped onto the X.400 series of recommendations, with the Abstract Service Definition of the operational objects defined, along with their associated component files, by extending the X.420 protocol functionality. It is proposed that each of the Informative, Objective and Supportive application groups should be implemented as a modified X.420 inter-personal messaging system.