A Formal Approach to Support Interoperability in Scientific Meta-workflows

Scientific workflows orchestrate the execution of complex experiments frequently using distributed computing platforms. Meta-workflows represent an emerging type of such workflows which aim to reuse existing workflows from potentially different workflow systems to achieve more complex and experimentation minimizing workflow design and testing efforts. Workflow interoperability plays a profound role in achieving this objective. This paper is focused at fostering interoperability across meta-workflows that combine workflows of different workflow systems from diverse scientific domains. This is achieved by formalizing definitions of meta-workflow and its different types to standardize their data structures used to describe workflows to be published and shared via public repositories. The paper also includes thorough formalization of two workflow interoperability approaches based on this formal description: the coarse-grained and fine-grained workflow interoperability approach. The paper presents a case study from Astrophysics which successfully demonstrates the use of the concepts of meta-workflows and workflow interoperability within a scientific simulation platform.

Using modeling as a co-design approach in the planning process of new care environments

Current research shows a relationship between healthcare architecture and patient-related Outcomes. The planning and designing of new healthcare environments is a complex process; the needs of the various end-users of the environment must be considered, including the patients, the patients’ significant others, and the staff. The aim of this study was to explore the experiences of healthcare professionals participating in group modelling utilizing system dynamics in the pre-design phase of new healthcare environments. We engaged healthcare professionals in a series of workshops using system dynamics to discuss the planning of healthcare environments in the beginning of a construction, and then interviewed them about their experience. An explorative and qualitative design was used to describe participants’ experiences of participating in the group modelling projects. Participants (n=20) were recruited from a larger intervention study using group modeling and system dynamics in planning and designing projects. The interviews were analysed by qualitative content analysis. Two themes were formed, representing the experiences in the group modeling process: ‘Partaking in the G-M created knowledge and empowerment’and ‘Partaking in the G-M was different from what was expected and required time and skills’. The method can support participants in design teams to focus more on their healthcare organization, their care activities and their aims rather than focusing on detailed layout solutions. This clarification is important when decisions about the design are discussed and prepared and will most likely lead to greater readiness for future building process.

Predictive Analytics and Decision Support for Heart Failure patients

Thesis (Master's)--University of Washington, 2016-08

The Design and Development of Educational Immersive Environments: From Theory to Classroom Deployment

Computer game technology is poised to make a significant impact on the way our youngsters will learn. Our youngsters are ‘Digital Natives’, immersed in digital technologies, especially computer games. They expect to utilize these technologies in learning contexts. This expectation, and our response as educators, may change classroom practice and inform curriculum developments. This chapter approaches these issues ‘head on’. Starting from a review of the current educational issues, an evaluation of educational theory and instructional design principles, a new theoretical approach to the construction of “Educational Immersive Environments” (EIEs) is proposed. Elements of this approach are applied to development of an EIE to support Literacy Education in UK Primary Schools. An evaluation of a trial within a UK Primary School is discussed. Conclusions from both the theoretical development and the evaluation suggest how future teacher-practitioners may embrace both the technology and our approach to develop their own learning resources.

Creating Educational Immersive Environments Using a Computer Game Engine: Case Studies and Design Theory

This paper aims to crystallize recent research performed at the University of Worcester to investigate the feasibility of using the commercial game engine ‘Unreal Tournament 2004’ (UT2004) to produce ‘Educational Immersive Environments’ (EIEs) suitable for education and training. Our research has been supported by the UK Higher Education Academy. We discuss both practical and theoretical aspects of EIEs. The practical aspects include the production of EIEs to support high school physics education, the education of architects, and the learning of literacy by primary school children. This research is based on the development of our novel instructional medium, ‘UnrealPowerPoint’. Our fundamental guiding principles are that, first, pedagogy must inform technology, and second, that both teachers and pupils should be empowered to produce educational materials. Our work is informed by current educational theories such as constructivism, experiential learning and socio-cultural approaches as well as elements of instructional design and game principles.

Designing motivation or motivating design? Exploring Service Design, motivation and behavioural change

Motivation researcher Edward Deci has suggested that if we want behavioural change to be sustainable, we have to move past thinking of motivation as something that we ‘do’ to other people and see it rather as something that we as Service Designers can enable service users to ‘do’ by themselves. In this article, Fergus Bisset explores the ways in which Service Designers can create more motivating services. Dan Lockton then looks at where motivating behaviour via Service Design often starts, with the basic ‘pinball’ and ‘shortcut’ approaches. We conclude by proposing that if services are to be sustainable in the long term, we as Service Designers need to strive to accommodate humans' differing levels of motivation and encourage and support service users' sense of autonomy within the services we design.

It's Not Rocket Library Science: Design Epistemology and American Librarianship

Thesis (Ph.D.)--University of Washington, 2016-06

A qualitative study of the emotional coping and support needs of children living with a parent with a brain injury

Primary objective: To examine emotional coping and support needs in children of persons with acquired brain injury, with a view to understanding what interventions would be helpful for these children. Design: The study was qualitative, using a thematic analysis approach. Methods and procedure: Six children between 9 and 18 years of age, six parents (three with ABI), and three support workers were interviewed either at home or at a support centre, using a semi-structured interview guide. Results: Children reported using a variety of adaptive and maladaptive emotional coping strategies, but were consistent in expressing a need for credible validation, i.e. sharing experiences with peers. The results are presented under four overarching themes: difficulties faced; emotions experienced; coping strategies; and reported support needs. Conclusions: The results reveal an interaction between the child’s experiences of complex loss that is difficult to acknowledge, emotional distancing between parent and child, and the children’s need for credible validation. All children expressed a desire for talking to peers in a similar situation to themselves, but had not had this opportunity. Interventions should set up such peer interaction to create credible validation for the specific distress suffered by this population.

Policy and Design Guidelines for Trees in a Growing Seattle

Thesis (Master's)--University of Washington, 2016-08

The Design and Implementation of a SD Card File System

SD card (Secure Digital Memory Card) is widely used in portable storage medium. Currently, latest researches on SD card, are mainly SD card controller based on FPGA (Field Programmable Gate Array). Most of them are relying on API interface (Application Programming Interface), AHB bus (Advanced High performance Bus), etc. They are dedicated to the realization of ultra high speed communication between SD card and upper systems. Studies about SD card controller, really play a vital role in the field of high speed cameras and other sub-areas of expertise. This design of FPGA-based file systems and SD2.0 IP (Intellectual Property core) does not only exhibit a nice transmission rate, but also achieve the systematic management of files, while retaining a strong portability and practicality. The file system design and implementation on a SD card covers the main three IP innovation points. First, the combination and integration of file system and SD card controller, makes the overall system highly integrated and practical. The popular SD2.0 protocol is implemented for communication channels. Pure digital logic design based on VHDL (Very-High-Speed Integrated Circuit Hardware Description Language), integrates the SD card controller in hardware layer and the FAT32 file system for the entire system. Secondly, the document management system mechanism makes document processing more convenient and easy. Especially for small files in batch processing, it can ease the pressure of upper system to frequently access and process them, thereby enhancing the overall efficiency of systems. Finally, digital design ensures the superior performance. For transmission security, CRC (Cyclic Redundancy Check) algorithm is for data transmission protection. Design of each module is platform-independent of macro cells, and keeps a better portability. Custom integrated instructions and interfaces may facilitate easily to use. Finally, the actual test went through multi-platform method, Xilinx and Altera FPGA developing platforms. The timing simulation and debugging of each module was covered. Finally, Test results show that the designed FPGA-based file system IP on SD card can support SD card, TF card and Micro SD with 2.0 protocols, and the successful implementation of systematic management for stored files, and supports SD bus mode. Data read and write rates in Kingston class10 card is approximately 24.27MB/s and 16.94MB/s.

An iterative analytical design framework for the optimal designing of an off-grid renewable energy based hybrid smart micro-grid

Creative ways of utilising renewable energy sources in electricity generation especially in remote areas and particularly in countries depending on imported energy, while increasing energy security and reducing cost of such isolated off-grid systems, is becoming an urgently needed necessity for the effective strategic planning of Energy Systems. The aim of this research project was to design and implement a new decision support framework for the optimal design of hybrid micro grids considering different types of different technologies, where the design objective is to minimize the total cost of the hybrid micro grid while at the same time satisfying the required electric demand. Results of a comprehensive literature review, of existing analytical, decision support tools and literature on HPS, has identified the gaps and the necessary conceptual parts of an analytical decision support framework. As a result this research proposes and reports an Iterative Analytical Design Framework (IADF) and its implementation for the optimal design of an Off-grid renewable energy based hybrid smart micro-grid (OGREH-SμG) with intra and inter-grid (μG2μG & μG2G) synchronization capabilities and a novel storage technique. The modelling design and simulations were based on simulations conducted using HOMER Energy and MatLab/SIMULINK, Energy Planning and Design software platforms. The design, experimental proof of concept, verification and simulation of a new storage concept incorporating Hydrogen Peroxide (H2O2) fuel cell is also reported. The implementation of the smart components consisting Raspberry Pi that is devised and programmed for the semi-smart energy management framework (a novel control strategy, including synchronization capabilities) of the OGREH-SμG are also detailed and reported. The hybrid μG was designed and implemented as a case study for the Bayir/Jordan area. This research has provided an alternative decision support tool to solve Renewable Energy Integration for the optimal number, type and size of components to configure the hybrid μG. In addition this research has formulated and reported a linear cost function to mathematically verify computer based simulations and fine tune the solutions in the iterative framework and concluded that such solutions converge to a correct optimal approximation when considering the properties of the problem. As a result of this investigation it has been demonstrated that, the implemented and reported OGREH-SμG design incorporates wind and sun powered generation complemented with batteries, two fuel cell units and a diesel generator is a unique approach to Utilizing indigenous renewable energy with a capability of being able to synchronize with other μ-grids is the most effective and optimal way of electrifying developing countries with fewer resources in a sustainable way, with minimum impact on the environment while also achieving reductions in GHG. The dissertation concludes with suggested extensions to this work in the future.

Beyond the bottom line: redefining the value of design in SME formation

For SMEs to operate in the complex and globalised economic landscape of today engaging with innovation can sustain competitive advantage. Within Design Management, design is being increasingly posited as a strategic resource to facilitate the absorption of new design resources and leverage design knowledge in ways that support SMEs through such economic pressures. Evidencing the relationship between design and economic performance is complex, leading to extensive current research and industry efforts to show how design adds economic value. Despite the value of such efforts, it is important to recognise that innovation means different things to different organizations, especially for start-ups and SMEs. Within the rising tide of design-led innovation, there is a gap being explored in how design can effectively capture and evaluate its contribution within the complex and diverse situations of business development it engages. In seeking to address this gap, this paper presents findings from research undertaken within Design in Action (DiA), an AHRC-funded knowledge exchange hub. Presenting DiA as a single case study, the paper offers methodical reflection on five case example start-up businesses funded by DiA in order to explore the value that design-led innovation approaches offered in their formation.

An SVM-Fuzzy system design for diabetes risk classification

DEVELOPMENT OF A DECISION/DEPLOYMENT SUPPORT TOOL FOR VARIABLE SPEED LIMITS IN RECURRENT CONGESTION

Traffic demand increases are pushing aging ground transportation infrastructures to their theoretical capacity. The result of this demand is traffic bottlenecks that are a major cause of delay on urban freeways. In addition, the queues associated with those bottlenecks increase the probability of a crash while adversely affecting environmental measures such as emissions and fuel consumption. With limited resources available for network expansion, traffic professionals have developed active traffic management systems (ATMS) in an attempt to mitigate the negative consequences of traffic bottlenecks. Among these ATMS strategies, variable speed limits (VSL) and ramp metering (RM) have been gaining international interests for their potential to improve safety, mobility, and environmental measures at freeway bottlenecks. Though previous studies have shown the tremendous potential of variable speed limit (VSL) and VSL paired with ramp metering (VSLRM) control, little guidance has been developed to assist decision makers in the planning phase of a congestion mitigation project that is considering VSL or VSLRM control. To address this need, this study has developed a comprehensive decision/deployment support tool for the application of VSL and VSLRM control in recurrently congested environments. The decision tool will assist practitioners in deciding the most appropriate control strategy at a candidate site, which candidate sites have the most potential to benefit from the suggested control strategy, and how to most effectively design the field deployment of the suggested control strategy at each implementation site. To do so, the tool is comprised of three key modules, (1) Decision Module, (2) Benefits Module, and (3) Deployment Guidelines Module. Each module uses commonly known traffic flow and geometric parameters as inputs to statistical models and empirically based procedures to provide guidance on the application of VSL and VSLRM at each candidate site. These models and procedures were developed from the outputs of simulated experiments, calibrated with field data. To demonstrate the application of the tool, a list of real-world candidate sites were selected from the Maryland State Highway Administration Mobility Report. Here, field data from each candidate site was input into the tool to illustrate the step-by-step process required for efficient planning of VSL or VSLRM control. The output of the tool includes the suggested control system at each site, a ranking of the sites based on the expected benefit-to-cost ratio, and guidelines on how to deploy the VSL signs, ramp meters, and detectors at the deployment site(s). This research has the potential to assist traffic engineers in the planning of VSL and VSLRM control, thus enhancing the procedure for allocating limited resources for mobility and safety improvements on highways plagued by recurrent congestion.

Do Editorial Policies Support Ethical Research? A Thematic Text Analysis of Author Instructions in Psychiatry Journals

Introduction: According to the Declaration of Helsinki and other guidelines, clinical studies should be approved by a research ethics committee and seek valid informed consent from the participants. Editors of medical journals are encouraged by the ICMJE and COPE to include requirements for these principles in the journal's instructions for authors. This study assessed the editorial policies of psychiatry journals regarding ethics review and informed consent. Methods and Findings: The information given on ethics review and informed consent and the mentioning of the ICMJE and COPE recommendations were assessed within author's instructions and online submission procedures of all 123 eligible psychiatry journals. While 54% and 58% of editorial policies required ethics review and informed consent, only 14% and 19% demanded the reporting of these issues in the manuscript. The TOP-10 psychiatry journals (ranked by impact factor) performed similarly in this regard. Conclusions: Only every second psychiatry journal adheres to the ICMJE's recommendation to inform authors about requirements for informed consent and ethics review. Furthermore, we argue that even the ICMJE's recommendations in this regard are insufficient, at least for ethically challenging clinical trials. At the same time, ideal scientific design sometimes even needs to be compromised for ethical reasons. We suggest that features of clinical studies that make them morally controversial, but not necessarily unethical, are analogous to methodological limitations and should thus be reported explicitly. Editorial policies as well as reporting guidelines such as CONSORT should be extended to support a meaningful reporting of ethical research.