Produzione di virus sintetici per lo studio dei meccanismi di interazione coinvolti nell'induzione di resistenza

Beet soil-borne mosaic virus (BSBMV) and Beet necrotic yellow vein virus (BNYVV) are members of Benyvirus genus. BSBMV has been reported only in the United States while BNYVV has a worldwide distribution. Both viruses are vectored by Polymyxa betae, possess similar host ranges, particles number and morphology. Both viruses are not serologically related but have similar genomic organizations. Field isolates consist of four RNA species but some BNYVV isolates contain a fifth RNA. RNAs 1 and 2 are essential for infection and replication while RNAs 3 and 4 play important roles on plant and vector interactions, respectively. Nucleotide and amino acid analyses revealed BSBMV and BNYVV are different enough to be classified in two different species. Additionally in BNYVV/BSBMV mixed infections, a competition was previous described in sugar beet, where BNYVV infection reduces BSBMV accumulation in both susceptible and resistant cultivars. Considering all this observations we hypothesized that BNYVV and BSBMV crossed study, exploiting their similarities and divergences, can improve investigation of molecular interactions between sugar beets and Benyviruses. The main achievement of our research is the production of a cDNA biologically active clones collection of BNYVV and BSBMV RNAs, from which synthetic copies of both Benyviruses can be transcribed. Moreover, through recombination experiments we demonstrated, for the first time, the BNYVV RNA 1 and 2 capability to trans-replicate and encapsidate BSBMV RNA 3 and 4, either the BSBMV RNA 1 and 2 capability to replicate BNYVV RNA2 in planta. We also demonstrated that BSBMV RNA3 support long-distance movement of BNYVV RNA 1 and 2 in B. macrocarpa and that 85 foreign sequence as p29HA, GFP and RFP, are successfully expressed, in C. quinoa, by BSBMV RNA3 based replicon (RepIII) also produced by our research. These results confirm the close correlation among the two viruses. Interestingly, the symptoms induced by BSBMV RNA-3 on C. quinoa leaves are more similar to necrotic local lesions caused by BNYVV RNA-5 p26 than to strongly chlorotic local lesions or yellow spot induced by BNYVV RNA- 3 encoded p25. As previous reported BSBMV p29 share 23% of amino acid sequence identity with BNYVV p25 but identity increase to 43% when compared with sequence of BNYVV RNA-5 p26. Based on our results the essential sequence (Core region) for the longdistance movement of BSBMV and BNYVV in B. macrocarpa, is not only carried by RNA3s species but other regions, perhaps located on the RNA 1 and 2, could play a fundamental role in this matter. Finally a chimeric RNA, composed by the 5’ region of RNA4 and 3’ region of RNA3 of BSBMV, has been produced after 21 serial mechanically inoculation of wild type BSBMV on C. quinoa plants. Chimera seems unable to express any protein, but it is replicated and transcript in planta. It could represent an important tool to study the interactions between Benyvirus and plant host. In conclusion different tools, comprising a method to study synthetic viruses under natural conditions of inoculum through P. Betae, have been produced and new knowledge are been acquired that will allow to perform future investigation of the molecular interactions between sugar beets and Benyviruses.

Purging e alte dosi di chemioterapia con reinfusione di cellule staminali autologhe in linfomi non Hodgkin follicolari resistenti/refrattari

In the era of monoclonal antibodies the role of autologous stem cell transplantation (ASCT) in the management of follicular lymphoma (FL) is still debated. To evaluate the safety and efficacy of myeloablative therapy with rescue of purged or unpurged harvests in FL pts. At our institution form 1997 to 2007 28 pts with refractory/resistant FL were eligible for ASCT. Before high dose therapy they received 2-3 cycles of CHOP-like regimen (ACOD), followed by Cyclophosphamide 4g/mq to mobilize the stem cells (SC). After SC collection the pts underwent 3 cycles of subcutaneous Cladribine at a daily dose of 0,14-0,10 mg/Kg for Day 1-5 every 3-4 weeks. The conditioning regimen was based on Mitoxantrone 60mg/mq + Melphalan 180 mg/mq, followed by SC re-infusion 24-hours later and G-CSF starting 24 hours after re-infusion. In 19 pts the SC underwent purging: in 10 harvests the CD34+ were selected by immunomagnetic beads, while in the other 9 pts, only Rituximab was used as “purging in vivo” agent. The remaining 9 pts received unpurged SC. Before ASCT 11 pts were in complete response (CR), 9 in partial response (PR) and 2 in stable disease. Two pts were not eligible for ASCT because of progressive disease (PD). The remaining 25 pts were eligible for ASCT. The engraftment was at a median of 11 days for leucocytes and 14 days for platelets (>20.000/mmc), with a delay of one day in the pts, who received purged SC. Grade 3-4 mucositis was described in 8 pts. During aplasia a 48% infection rate was reported, without differences between pts with purged or unpurged SC. One patient in CR presented myelodysplastic syndrome at 18 months from ASCT. After ASCT 22 pts were in CR, 2 in PR and one patient were not valuable, because died before response assessment. Nine pts in CR showed PD at a median time of 14 months from ASCT. With a median follow up of 5 years (range 2 months -10 years), 22 pts are alive and 11 (44%) in CR. Ten pts died, 5 for progressive disease and 5 for treatment-related causes; in particular 7 of them received in-vitro purged SC. Conclusions: Our chemotherapy regimen, which included the purine analogue Cladribine in the induction phase, seems safe and feasible. The high rate of CR reported and the sustained freedom from progression up to now, makes such modality of treatment a valid option principally in relapsing FL patients. In our experience, the addition of a monoclonal antibody as part of treatment confirms its role “in vivo purging” without observing an increased incidence of infection.

Il trapianto di midollo osseo aploidentico nelle patologie oncoematologiche: studio clinico

L’argomento della presente tesi di dottorato riguarda lo studio clinico del trapianto di cellule staminali emopoietiche aploidentiche nelle patologie oncoematologiche. Nel periodo di tempo compreso tra 1/12/2005 ed il 30/10/2007 sono stati arruolati 10 pazienti (6 LAM, 3 LAL, 1 LMC in crisi blastica mieloide) nell’ambito di uno studio clinico che prevedeva il trapianto di midollo osseo aploidentico per pazienti affetti da patologia oncoematologica in prima o successiva recidiva, per i quali non fosse disponibile un donatore di midollo osseo consanguineo o da banca. Lo schema di condizionamento al trapianto di midollo osseo utilizzato era il seguente: Fludarabina 150/m2, Busulfano orale 14mg/kg, Tiothepa 10mg/kg e Ciclofosfamide 160mg/kg. Per la profilassi della malattia da trapianto contro l’ospite è stata somministrata timoglobulina antilinfocitaria (ATG) al dosaggio complessivo di 12.5 mg/kg, short course metotrexate (+1, +3 e +11), cortisone e ciclosporina con tapering precoce al + 60. I pazienti hanno reinfuso una megadose di cellule CD34+ mediana pari a 12.8x106/kg. Tre pazienti non sono valutabili per l’attecchimento a causa di rigetto (1/3) o morte precoce (2/3). Sette pazienti sono valutabili per l’attecchimento; per questi pazienti il tempo mediano a 500 PMN/mmc e a 20 x 109/l piastrine è stato rispettivamente di 17 e 20 giorni. Quattro pazienti su 7 hanno svillupato una Graft versus Host Disease (GVHD) acuta di grado II-IV, mentre soltanto 1/7 ha sviluppato una GVHD cronica. Sette pazienti su 10 trapiantati hanno ottenuto una remissione completa successivamente al trapianto. Di questi, attualmente 2 pazienti sono vivi in remissione completa, mentre gli altri 5 sono ricaduti e successivamente deceduti. In conclusione, il trapianto aploidentico è una procedura fattibile ed efficace. Tale procedura è in grado di garantire un 20% di lungo sopravviventi in un setting di pazienti a prognosi estremamente infausta.

Epatite E: ruolo del suino nella trasmissione dell'infezione all'uomo, studio di prevalenza in aree rurali della Bolivia

L’infezione da virus dell’ epatite E (HEV) nei suini e nell’uomo è stata segnalata in diversi Paesi. Nei suini, il virus causa infezioni asintomatiche, mentre nell’uomo è responsabile di epidemie di epatite ad andamento acuto nei Paesi a clima tropicale o subtropicale con condizioni igieniche scadenti, di casi sporadici in quelli sviluppati. HEV è stato isolato anche in diversi animali e l’analisi nucleotidica degli isolati virali di origine animale ha mostrato un elevato grado di omologia con i ceppi di HEV umani isolati nelle stesse aree geografiche, avvalorando l’ipotesi che l'infezione da HEV sia una zoonosi. In America del Sud HEV suino è stato isolato per la prima volta in suini argentini nel 2006, mentre solo dal 1998 esistono dati sull’ infezione da HEV nell’uomo in Bolivia. In questa indagine è stato eseguito uno studio di sieroprevalenza in due comunità rurali boliviane e i risultati sono stati confrontati con quelli dello studio di sieroprevalenza sopra menzionato condotto in altre zone rurali della Bolivia. Inoltre, mediante Nested RT-PCR, è stata verificata la presenza di HEV nella popolazione umana e suina. La sieroprevalenza per anticorpi IgG anti-HEV è risultata pari al 6,2%, molto simile a quella evidenziata nello studio precedente. La prevalenza maggiore (24%) si è osservata nei soggetti di età compresa tra 41 e 50 anni, confermando che l’ infezione da HEV è maggiore fra i giovani-adulti. La ricerca di anticorpi anti HEV di classe IgM eseguita su 52 sieri ha fornito 4 risultati positivi. Il genoma virale è stato identificato in uno dei 22 pool di feci umane e l'esame virologico di 30 campioni individuali fecali e 7 individuali di siero ha fornito rispettivamente risultati positivi in 4/30 e 1/7. La Nested RT-PCR eseguita sui 22 pool di feci suine ha dato esito positivo in 7 pool. L’analisi delle sequenze genomiche di tutti gli amplificati ha consentito di stabilire che gli isolati umani appartenevano allo stesso genotipo III di quelli suini e presentavano con questi una elevata omologia aminoacidica (92%).

L'infiammazione intestinale nell'animale sperimentale come modello per lo sviluppo di nuovi farmaci: ruolo della via tachichininergica nelle malattie infiammatorie intestinali

Background: Several lines of evidence showed that inflammation is associated with changes in the expression of tachykinins both in human and animal models. Tachykinins, including substance P (SP), are small peptides expressed in the extrinsic primary afferent nerve fibres and enteric neurons of the gut: they exert their action through three distinct receptors, termed NK1, NK2 and NK3. SP modulates intestinal motility and enteric secretion, acting preferentially through the NK1 receptor. SP neural network and NK1 receptor expression are increased in patients with inflammatory bowel disease, and similar changes were observed in experimental models of inflammation. The 2,4 Dinitrobenzene Sulphonic Acid (DNBS) model of colitis is useful to study innate immunity, non-specific inflammation and wound healing; it has been suggested that the transmural inflammation seen in this model resembles that found in Crohn’s disease and can therefore be used to study what cells and mediators are involved in this type of inflammation. Aim: To test the possible protective effect of the NK1 receptor antagonist SSR140333 on: 1) acute model of intestinal inflammation; 2) reactivation of DNBS-induced colitis in rats. Methods: Acute colitis was induced in male SD rats by intrarectal administration of DNBS (15 mg/rat in 50% ethanol). Reactivation of colitis was induced by intrarectal injections of DNBS on day 28 (7.5 mg/rat in 35% ethanol). Animals were sacrificed on day 6 (acute colitis) and 29 (reactivation of colitis). SSR140333 (10 mg/kg) was administered orally starting from the day before the induction of colitis for 7 days (acute colitis) or seven days before the reactivation of colitis. Colonic damage was assessed by means of macroscopic and microscopic scores, myeloperoxidase activity (MPO) and TNF-α tissue levels. Enzyme immunoassay was used to measure colonic substance P levels. Statistical analysis was performed using analysis of variance (one-way or two-way, as appropriate) with the Bonferroni’s correction for multiple comparisons. Results: DNBS administration impaired body weight gain and markedly increased all inflammatory parameters (p<0.01). Treatment with SSR140333 10 mg/kg significantly counteracted the impairment in body weight gain, decreased macroscopic and histological scores and reduced colonic myeloperoxidase activity (p<0.01). Drug treatment counteracted TNF-α tissue levels and colonic SP concentrations (acute model). Similar results were obtained administering the NK1 receptor antagonist SSR140333 (3 and 10 mg/kg) for 5 days, starting the day after the induction of colitis. Intrarectal administration of DNBS four weeks after the first DNBS administration resulted in reactivation of colitis, with increases in macroscopic and histological damage scores and increase in MPO activity. Preventive treatment with SSR140333 10 mg/kg decreased macroscopic damage score, significantly reduced microscopic damage score but did not affect MPO activity. Conclusions: Treatment with SSR140333 significantly reduced intestinal damage in acute model of intestinal inflammation in rats. The NK1 receptor antagonist SSR140333 was also able to prevent relapse in experimental colitis. These results support the hypothesis of SP involvement in intestinal inflammation and indicate that NK receptor antagonists may have a therapeutic potential in inflammatory bowel disease.

Aumento della risoluzione spaziale per il sondaggio di temperatura e umidità da satellite geostazionario mediante radiometria ad onde millimetriche e submillimetriche

The purpose of this study is to develop and evaluate techniques that improve the spatial resolution of the channels already selected in the preliminary studies for Geostationary Observatory for Microwave Atmospheric Soundings (GOMAS). Reference high resolution multifrequency brightness temperatures scenarios have been derived by applying radiative transfer calculation to the spatially and microphysically detailed output of meteorological events simulated by the University of Wisconsin - Non-hydrostatic Model System (UW-NMS). Three approaches, Wiener filter, Super-Resolution and Image Fusion have been applied to some representative GOMAS frequency channels to enhance the resolution of antenna temperatures. The Wiener filter improved resolution of the largely oversampled images by a factor 1.5- 2.0 without introducing any penalty in the radiometric accuracy. Super-resolution, suitable for not largely oversampled images, improved resolution by a factor ~1.5 but introducing an increased radiometric noise by a factor 1.4-2.5. The image fusion allows finally to further increase the spatial frequency of the images obtained by the Wiener filter increasing the total resolution up to a factor 5.0 with an increased radiometric noise closely linked to the radiometric frequency and to the examined case study.

Interpretazione geotecnica di alcuni risultati ottenuti dalla costruzione del grande terrapieno sperimentale di Treporti(VE)

I terreni di Treporti, nella laguna di Venezia, sono caratterizzati da una fitta alternanza di strati con caratteristiche di compressibilità fortemente variabili, pertanto risulta alquanto complessa la determinazione e la scelta di parametri appropriati per la progettazione. La costruzione del terrapieno sperimentale, ed il contemporaneo impiego dell'assestimetro a basi multiple, ha permesso di misurare il comportamento deformativo del terreno in sito e le analisi retrospettive hanno simulato, in base a parametri di tentativo, il comportamento nel tempo dei terreni di fondazione. L'analisi a posteriori delle deformazioni è stata confrontata con le misure effettuate nel corso degli anni precedenti la fase di scarico, mentre oltre questa fase è stata eseguita una previsione confrontata con le tre misure eseguite dopo la fase di scarico, ottenendo in entrambi i casi un buon accordo tra simulazioni e misure. L’aderenza quasi perfetta ottenuta tra le curve ε-t calcolate e le corrispondenti curve ε-t sperimentali, fa ritenere che tutti i parametri geotecnici ottenuti dal modello, rispecchino con buona approssimazione quelli realmente mobilitati dai 40 m di sottosuolo interessati dal carico. Pertanto anche i risultati ottenuti in ordine all'influenza della consolidazione secondaria sugli abbassamenti totali, debbono ritenersi con buona approssimazione vicini al comportamento reale. Il modello è anche in grado di descrivere molto bene i cedimenti dei diversi strati di terreno e quello del piano di posa.

Studio del processo produttivo del riciclo di materiali provenienti da attività di C&D in un impianto di nuova realizzazione

Lo studio del processo produttivo del riciclo di materiali provenienti da attività di C&D in un impianto di nuova realizzazione, presentato in questa tesi di laurea,è così articolato: nel primo capitolo si analizza la complicata evoluzione della normativa in materia di rifiuti (non solo da C&D) su scala europea e nazionale accennando i provvedimenti legislativi su scala regionale, con particolare riferimento alla Regione Veneto. Si esamineranno, pertanto, le direttive e le decisioni della Comunità Europea che hanno ispirato, a partire dal 1975, i provvedimenti legislativi nazionali, tra cui vale la pena di ricordare il “Decreto Ronchi”, emanato nel febbraio del 1997, l’attuale D.Lgs. 3/4/2006 n.152, e i Decreti Ministeriali di riferimento per la materia di studio, ovvero il D.M. 5/2/1998, riguardante l’individuazione dei rifiuti per cui è possibile procedere al loro trattamento in regime semplificato e l’ancora poco attuato D.M.8/5/2003 n.203, riferito all’utilizzo di materiale riciclato nelle Pubbliche Amministrazioni. Il secondo capitolo definisce, invece, le caratteristiche principali dei rifiuti da C&D, appartenenti alla categoria dei rifiuti inerti, e delinea le odierne problematiche inerenti a tali materiali. A conferma di queste, nella seconda parte del capitolo, sono presentati alcuni dati che fotografano oggettivamente gli scenari attuali in Europa e in Italia in riferimento alla produzione, al recupero e allo smaltimento di questa categoria di rifiuti. In seguito, il terzo capitolo inizia a definire gli aspetti relativi alla realizzazione di un impianto di studio per il riciclo di rifiuti da C&D. In esso si evidenziano le procedure amministrative, gli adempimenti burocratici e in generale tutti gli aspetti inerenti alla gestione dei rifiuti da C&D per l’esecuzione delle attività di recupero e smaltimento previste dal D.Lgs. n.152/2006, così come modificato dal recentissimo D.Lgs. n.4/2008. Il quarto capitolo definisce i termini per poter considerare i rifiuti da C&D trattati in impianto come MPS. L’attenzione è riposta sulla Direttiva 89/106/CEE, che impone obbligatoriamente, dal 01/06/2004, la marcatura CE per tutti i prodotti da costruzione e, quindi, anche per gli aggregati riciclati. Pertanto, in questo capitolo, vengono definite le prove richieste obbligatoriamente dal D.M 11/4/2007 in accordo con la norma europea UNI EN 13242 recante “Aggregati per materiali non legati e legati con leganti idraulici per l'impiego in opere di ingegneria civile e nella costruzione di strade" ed, in conclusione, viene studiata la Circolare n.5205/2005 che dovrebbe dare attuazione nel settore edile, stradale e ambientale al D.M. n.203/2003. Successivamente, il quinto capitolo delinea le caratteristiche principali degli impianti di trattamento per il recupero dei rifiuti da C&D, delineando le principali differenze tra gli impianti fissi e i mobili ed esaminando le diverse fasi del ciclo produttivo, anche in relazione ad un impianto di studio situato nella provincia di Verona. Infine, il sesto capitolo riassume i risultati delle prove di marcatura CE per gli aggregati riciclati prodotti nell’impianto descritto. Tali prove sono state eseguite presso il Laboratorio di Strade della Facoltà di Ingegneria dell’Università degli Studi di Bologna.

Tecniche per il controllo dinamico del consumo di potenza per piattaforme system-on-chip

Providing support for multimedia applications on low-power mobile devices remains a significant research challenge. This is primarily due to two reasons: • Portable mobile devices have modest sizes and weights, and therefore inadequate resources, low CPU processing power, reduced display capabilities, limited memory and battery lifetimes as compared to desktop and laptop systems. • On the other hand, multimedia applications tend to have distinctive QoS and processing requirementswhichmake themextremely resource-demanding. This innate conflict introduces key research challenges in the design of multimedia applications and device-level power optimization. Energy efficiency in this kind of platforms can be achieved only via a synergistic hardware and software approach. In fact, while System-on-Chips are more and more programmable thus providing functional flexibility, hardwareonly power reduction techniques cannot maintain consumption under acceptable bounds. It is well understood both in research and industry that system configuration andmanagement cannot be controlled efficiently only relying on low-level firmware and hardware drivers. In fact, at this level there is lack of information about user application activity and consequently about the impact of power management decision on QoS. Even though operating system support and integration is a requirement for effective performance and energy management, more effective and QoSsensitive power management is possible if power awareness and hardware configuration control strategies are tightly integratedwith domain-specificmiddleware services. The main objective of this PhD research has been the exploration and the integration of amiddleware-centric energymanagement with applications and operating-system. We choose to focus on the CPU-memory and the video subsystems, since they are the most power-hungry components of an embedded system. A second main objective has been the definition and implementation of software facilities (like toolkits, API, and run-time engines) in order to improve programmability and performance efficiency of such platforms. Enhancing energy efficiency and programmability ofmodernMulti-Processor System-on-Chips (MPSoCs) Consumer applications are characterized by tight time-to-market constraints and extreme cost sensitivity. The software that runs on modern embedded systems must be high performance, real time, and even more important low power. Although much progress has been made on these problems, much remains to be done. Multi-processor System-on-Chip (MPSoC) are increasingly popular platforms for high performance embedded applications. This leads to interesting challenges in software development since efficient software development is a major issue for MPSoc designers. An important step in deploying applications on multiprocessors is to allocate and schedule concurrent tasks to the processing and communication resources of the platform. The problem of allocating and scheduling precedenceconstrained tasks on processors in a distributed real-time system is NP-hard. There is a clear need for deployment technology that addresses thesemulti processing issues. This problem can be tackled by means of specific middleware which takes care of allocating and scheduling tasks on the different processing elements and which tries also to optimize the power consumption of the entire multiprocessor platform. This dissertation is an attempt to develop insight into efficient, flexible and optimalmethods for allocating and scheduling concurrent applications tomultiprocessor architectures. It is a well-known problem in literature: this kind of optimization problems are very complex even in much simplified variants, therefore most authors propose simplified models and heuristic approaches to solve it in reasonable time. Model simplification is often achieved by abstracting away platform implementation ”details”. As a result, optimization problems become more tractable, even reaching polynomial time complexity. Unfortunately, this approach creates an abstraction gap between the optimization model and the real HW-SW platform. The main issue with heuristic or, more in general, with incomplete search is that they introduce an optimality gap of unknown size. They provide very limited or no information on the distance between the best computed solution and the optimal one. The goal of this work is to address both abstraction and optimality gaps, formulating accurate models which accounts for a number of ”non-idealities” in real-life hardware platforms, developing novel mapping algorithms that deterministically find optimal solutions, and implementing software infrastructures required by developers to deploy applications for the targetMPSoC platforms. Energy Efficient LCDBacklightAutoregulation on Real-LifeMultimediaAp- plication Processor Despite the ever increasing advances in Liquid Crystal Display’s (LCD) technology, their power consumption is still one of the major limitations to the battery life of mobile appliances such as smart phones, portable media players, gaming and navigation devices. There is a clear trend towards the increase of LCD size to exploit the multimedia capabilities of portable devices that can receive and render high definition video and pictures. Multimedia applications running on these devices require LCD screen sizes of 2.2 to 3.5 inches andmore to display video sequences and pictures with the required quality. LCD power consumption is dependent on the backlight and pixel matrix driving circuits and is typically proportional to the panel area. As a result, the contribution is also likely to be considerable in future mobile appliances. To address this issue, companies are proposing low power technologies suitable for mobile applications supporting low power states and image control techniques. On the research side, several power saving schemes and algorithms can be found in literature. Some of them exploit software-only techniques to change the image content to reduce the power associated with the crystal polarization, some others are aimed at decreasing the backlight level while compensating the luminance reduction by compensating the user perceived quality degradation using pixel-by-pixel image processing algorithms. The major limitation of these techniques is that they rely on the CPU to perform pixel-based manipulations and their impact on CPU utilization and power consumption has not been assessed. This PhDdissertation shows an alternative approach that exploits in a smart and efficient way the hardware image processing unit almost integrated in every current multimedia application processors to implement a hardware assisted image compensation that allows dynamic scaling of the backlight with a negligible impact on QoS. The proposed approach overcomes CPU-intensive techniques by saving system power without requiring either a dedicated display technology or hardware modification. Thesis Overview The remainder of the thesis is organized as follows. The first part is focused on enhancing energy efficiency and programmability of modern Multi-Processor System-on-Chips (MPSoCs). Chapter 2 gives an overview about architectural trends in embedded systems, illustrating the principal features of new technologies and the key challenges still open. Chapter 3 presents a QoS-driven methodology for optimal allocation and frequency selection for MPSoCs. The methodology is based on functional simulation and full system power estimation. Chapter 4 targets allocation and scheduling of pipelined stream-oriented applications on top of distributed memory architectures with messaging support. We tackled the complexity of the problem by means of decomposition and no-good generation, and prove the increased computational efficiency of this approach with respect to traditional ones. Chapter 5 presents a cooperative framework to solve the allocation, scheduling and voltage/frequency selection problem to optimality for energyefficient MPSoCs, while in Chapter 6 applications with conditional task graph are taken into account. Finally Chapter 7 proposes a complete framework, called Cellflow, to help programmers in efficient software implementation on a real architecture, the Cell Broadband Engine processor. The second part is focused on energy efficient software techniques for LCD displays. Chapter 8 gives an overview about portable device display technologies, illustrating the principal features of LCD video systems and the key challenges still open. Chapter 9 shows several energy efficient software techniques present in literature, while Chapter 10 illustrates in details our method for saving significant power in an LCD panel. Finally, conclusions are drawn, reporting the main research contributions that have been discussed throughout this dissertation.

Studio del comportamento meccanico di smalti porcellanati per substrati metallici

Composite porcelain enamels are inorganic coatings for metallic components based on a special ceramic-vitreous matrix in which specific additives are randomly dispersed. The ceramic-vitreous matrix is made by a mixture of various raw materials and elements and in particular it is based on boron-silicate glass added with metal oxides(1) of titanium, zinc, tin, zirconia, alumina, ecc. These additions are often used to improve and enhance some important performances such as corrosion(2) and wear resistance, mechanical strength, fracture toughness and also aesthetic functions. The coating process, called enamelling, depends on the nature of the surface, but also on the kind of the used porcelain enamel. For metal sheets coatings two industrial processes are actually used: one based on a wet porcelain enamel and another based on a dry-silicone porcelain enamel. During the firing process, that is performed at about 870°C in the case of a steel substrate, the enamel raw material melts and interacts with the metal substrate so enabling the formation of a continuous varying structure. The interface domain between the substrate and the external layer is made of a complex material system where the ceramic vitreous and the metal constituents are mixed. In particular four main regions can be identified, (i) the pure metal region, (ii) the region where the metal constituents are dominant compared with the ceramic vitreous components, (iii) the region where the ceramic vitreous constituents are dominant compared with the metal ones, and the fourth region (iv) composed by the pure ceramic vitreous material. It has also to be noticed the presence of metallic dendrites that hinder the substrate and the external layer passing through the interphase region. Each region of the final composite structure plays a specific role: the metal substrate has mainly the structural function, the interphase region and the embedded dendrites guarantee the adhesion of the external vitreous layer to the substrate and the external vitreous layer is characterized by an high tribological, corrosion and thermal shock resistance. Such material, due to its internal composition, functionalization and architecture can be considered as a functionally graded composite material. The knowledge of the mechanical, tribological and chemical behavior of such composites is not well established and the research is still in progress. In particular the mechanical performances data about the composite coating are not jet established. In the present work the Residual Stresses, the Young modulus and the First Crack Failure of the composite porcelain enamel coating are studied. Due to the differences of the porcelain composite enamel and steel thermal properties the enamelled steel sheets have residual stresses: compressive residual stress acts on the coating and tensile residual stress acts on the steel sheet. The residual stresses estimation has been performed by measuring the curvature of rectangular one-side coated specimens. The Young modulus and the First Crack Failure (FCF) of the coating have been estimated by four point bending tests (3-7) monitored by means of the Acoustic Emission (AE) technique(5,6). In particular the AE information has been used to identify, during the bending tests, the displacement domain over which no coating failure occurs (Free Failure Zone, FFZ). In the FFZ domain, the Young modulus has been estimated according to ASTM D6272-02. The FCF has been calculated as the ratio between the displacement at the first crack of the coating and the coating thickness on the cracked side. The mechanical performances of the tested coated specimens have also been related and discussed to respective microstructure and surface characteristics by double entry charts.

Rappresentazioni lineari di SL3(C)

Espongo i fatti di base della teoria delle rappresentazioni con lo scopo di indagare i possibili modi in cui un dato gruppo di Lie o algebra di Lie agisce su uno spazio vettoriale di dimensione finita. Tali risultati verranno applicati all'algebra di Lie del gruppo speciale lineare.

Sulla progettazione in zona sismica di strutture dotate di dissipatori fluido-viscosi: proposta di una metodologia

CHAPTER 1:FLUID-VISCOUS DAMPERS In this chapter the fluid-viscous dampers are introduced. The first section is focused on the technical characteristics of these devices, their mechanical behavior and the latest evolution of the technology whose they are equipped. In the second section we report the definitions and the guide lines about the design of these devices included in some international codes. In the third section the results of some experimental tests carried out by some authors on the response of these devices to external forces are discussed. On this purpose we report some technical schedules that are usually enclosed to the devices now available on the international market. In the third section we show also some analytic models proposed by various authors, which are able to describe efficiently the physical behavior of the fluid-viscous dampers. In the last section we propose some cases of application of these devices on existing structures and on new-construction structures. We show also some cases in which these devices have been revealed good for aims that lies outside the reduction of seismic actions on the structures. CHAPTER 2:DESIGN METHODS PROPOSED IN LITERATURE In this chapter the more widespread design methods proposed in literature for structures equipped by fluid-viscous dampers are introduced. In the first part the response of sdf systems in the case of harmonic external force is studied, in the last part the response in the case of random external force is discussed. In the first section the equations of motion in the case of an elastic-linear sdf system equipped with a non-linear fluid-viscous damper undergoing a harmonic force are introduced. This differential problem is analytically quite complex and it’s not possible to be solved in a closed form. Therefore some authors have proposed approximate solution methods. The more widespread methods are based on equivalence principles between a non-linear device and an equivalent linear one. Operating in this way it is possible to define an equivalent damping ratio and the problem becomes linear; the solution of the equivalent problem is well-known. In the following section two techniques of linearization, proposed by some authors in literature, are described: the first technique is based on the equivalence of the energy dissipated by the two devices and the second one is based on the equivalence of power consumption. After that we compare these two techniques by studying the response of a sdf system undergoing a harmonic force. By introducing the equivalent damping ratio we can write the equation of motion of the non-linear differential problem in an implicit form, by dividing, as usual, for the mass of the system. In this way, we get a reduction of the number of variables, by introducing the natural frequency of the system. The equation of motion written in this form has two important properties: the response is linear dependent on the amplitude of the external force and the response is dependent on the ratio of the frequency of the external harmonic force and the natural frequency of the system only, and not on their single values. All these considerations, in the last section, are extended to the case of a random external force. CHAPTER 3: DESIGN METHOD PROPOSED In this chapter the theoretical basis of the design method proposed are introduced. The need to propose a new design method for structures equipped with fluid-viscous dampers arises from the observation that the methods reported in literature are always iterative, because the response affects some parameters included in the equation of motion (such as the equivalent damping ratio). In the first section the dimensionless parameterε is introduced. This parameter has been obtained from the definition of equivalent damping ratio. The implicit form of the equation of motion is written by introducing the parameter ε, instead of the equivalent damping ratio. This new implicit equation of motions has not any terms affected by the response, so that once ε is known the response can be evaluated directly. In the second section it is discussed how the parameter ε affects some characteristics of the response: drift, velocity and base shear. All the results described till this point have been obtained by keeping the non-linearity of the behavior of the dampers. In order to get a linear formulation of the problem, that is possible to solve by using the well-known methods of the dynamics of structures, as we did before for the iterative methods by introducing the equivalent damping ratio, it is shown how the equivalent damping ratio can be evaluated from knowing the value of ε. Operating in this way, once the parameter ε is known, it is quite easy to estimate the equivalent damping ratio and to proceed with a classic linear analysis. In the last section it is shown how the parameter ε could be taken as reference for the evaluation of the convenience of using non-linear dampers instead of linear ones on the basis of the type of external force and the characteristics of the system. CHAPTER 4: MULTI-DEGREE OF FREEDOM SYSTEMS In this chapter the design methods of a elastic-linear mdf system equipped with non-linear fluidviscous dampers are introduced. It has already been shown that, in the sdf systems, the response of the structure can be evaluated through the estimation of the equivalent damping ratio (ξsd) assuming the behavior of the structure elastic-linear. We would to mention that some adjusting coefficients, to be applied to the equivalent damping ratio in order to consider the actual behavior of the structure (that is non-linear), have already been proposed in literature; such coefficients are usually expressed in terms of ductility, but their treatment is over the aims of this thesis and we does not go into further. The method usually proposed in literature is based on energy equivalence: even though this procedure has solid theoretical basis, it must necessary include some iterative process, because the expression of the equivalent damping ratio contains a term of the response. This procedure has been introduced primarily by Ramirez, Constantinou et al. in 2000. This procedure is reported in the first section and it is defined “Iterative Method”. Following the guide lines about sdf systems reported in the previous chapters, it is introduced a procedure for the assessment of the parameter ε in the case of mdf systems. Operating in this way the evaluation of the equivalent damping ratio (ξsd) can be done directly without implementing iterative processes. This procedure is defined “Direct Method” and it is reported in the second section. In the third section the two methods are analyzed by studying 4 cases of two moment-resisting steel frames undergoing real accelerogramms: the response of the system calculated by using the two methods is compared with the numerical response obtained from the software called SAP2000-NL, CSI product. In the last section a procedure to create spectra of the equivalent damping ratio, affected by the parameter ε and the natural period of the system for a fixed value of exponent α, starting from the elasticresponse spectra provided by any international code, is introduced.