Web-based education in Spanish Universities. A Comparison of Open Source E-Learning Platforms

Web-based education or „e-learning‟ has become a critical component in higher education for the last decade, replacing other distance learning methods, such as traditional computer training or correspondence learning. The number of university students who take on-line courses is continuously increasing all over the world. In Spain, nearly a 90% of the universities have an institutional e-learning platform and over 60% of the traditional on-site courses use this technology as a supplement to the traditional face-to-face classes. This new form of learning allows the disappearance of geographical barriers and enables students to schedule their own learning process, among some other advantages. On-line education is developed through specific software called „e-learning platform‟ or „virtual learning environment‟ (VLE). A considerable number of web-based tools to deliver distance courses are currently available. Open source software packages such as Moodle, Sakai, dotLRN or Dokeos are the most commonly used in the virtual campuses of Spanish universities. This paper analyzes the possibilities that virtual learning environments provide university teachers and learners and offers a technical comparison among some of the most popular e-learning learning platforms.

c&d-learning implementation architecture: Adapting e-learning to developing countries

From the educational point of view, the most widespread method in developing countries is on-site education. Technical and economic resources cannot support conventional distance learning infrastructures and it is even worse for courses in universities. They usually suffer a lack of qualified faculty staff, especially in technical degrees. The literature suggest that e-learning is a suitable solution for this problem, but its methods are developed attending to educational necessities of the First World and cannot be applied directly to other contexts. The proposed methodology is a variant of traditional e-learning adapted to the needs of developing countries. E-learning for Cooperation and Development (c&d-learning) is oriented to be used for educational institutions without adequate technical or human resources. In this paper we describe the c&d-learning implementation architecture based on three main phases: hardware, communication and software; e.g. computer and technical equipping, internet accessing and e-learning platform adaptation. Proper adaptation of educational contents to c&d-learning is discussed and a real case of application in which the authors are involved is described: the Ngozi University at Burundi.

Foreigner? Want to study in Spain? The integration process at universities

The student exchange programs being carried out at universities for over 50 years, have led to changes in the institutions, which had to adapt to accommodate these students. Despite those changes, the integration of foreign students not coming from the aforementioned exchange programs that come to our country to study at the University has been neglected. These students face many barriers (language, cultural and origin customs mainly), so a clear and detailed information would be highly desirable in order to facilitate the necessary arrangements This study aims to show the deficiencies in the integration process and hosting programs faced by a foreign student at University. The study is performed by means of an analysis of statistical data from the Polytechnic University of Madrid and the Civil Engineering School over the last 12 school years (1999 - 2000 to 2010 - 2011), as well as surveys and interviews with some of these students. The study is enhanced with the analysis of the measures and integration methods of the various minorities, which had been implemented by the foremost public universities in Spain, as well as other public and private universities abroad. It illustrates the existing backlog at the Spanish universities with regards to supporting the integration of diversity among foreign students, providing data concerning the growth of such population and its impact at the university, and on the institutions in particular. In an increasingly globalized world, we must understand and facilitate the integration of minorities at University, supplying them, from the first day, and before the enrollment process, the essential elements that will allow their adequate adaptation to the educational process at University. It concludes by identifying the main subjects that need to be tackled to endorse such integration.

Optimization of the silicon subcell for III-V on silicon multijunction solar cells: key differences with conventional silicon technology

Dual-junction solar cells formed by a GaAsP or GaInP top cell and a silicon (Si) bottom cell seem to be attractive candidates to materialize the long sought-for integration of III-V materials on Si for photovoltaic (PV) applications. Such integration would offer a cost breakthrough for PV technology, unifying the low cost of Si and the efficiency potential of III-V multijunction solar cells. The optimization of the Si solar cells properties in flat-plate PV technology is well-known; nevertheless, it has been proven that the behavior of Si substrates is different when processed in an MOVPE reactor In this study, we analyze several factors influencing the bottom subcell performance, namely, 1) the emitter formation as a result of phosphorus diffusion; 2) the passivation quality provided by the GaP nucleation layer; and 3) the process impact on the bottom subcell PV properties.

Dielectric behaviour of Hf-doped CaCu3Ti4O12 ceramics obtained by conventional synthesis and reactive sintering

CaCu3(Ti4xHfx)O12 ceramics (JC = 0.04, 0.1 and 0.2) were prepared by conventional synthesis (CS) and through reactive sintering (RS), in which synthesis and sintering of the material take place in one single step. The microstructure and the dielectric properties of Hf-doped CCTO (CCTOHf) have been studied by XRD, FE-SEM, AFM, Raman and impedance spectroscopy (IS) in order to correlate the structure, microstructure and the electrical properties. Samples prepared by reactive sintering show slightly higher dielectric constant than those prepared by conventional synthesis in the same way than the pure CCTO. Dielectric constant and dielectric losses decrease slightly increasing Hf content. For CCTOHf ceramics with x> 0.04 for CS and x> 0.1 for RS, a secondary phase HfTi04 appears. As expected, the reactive sintering processing method allows a higher incorporation of Hf in the CCTO lattice than the conventional synthesis one.

Project based learning activities as a means of adapting conventional curricula to the demands of the 21st century aeronautical engineer: The design and building of the EYEFLY 1.

In this paper we report the process of designing and building the EYEFLY 1, a real UAS platform which has just performed its maiden flight. For the development of this aircraft, 30 groups of students from successive years at the Escuela Universitaria de Ingeniería Técnica Aeronáutica (EUITA) of the Universidad Politécnica de Madrid (UPM) carried out their compulsory End of Degree Project as a coordinated Project Based learning activity. Our conclusions clearly indicate that Project Based Learning activities can provide a valid complement to more conventional, theoretically-based, teaching methods. The combination of both approaches will allow us to maintain traditional but well-tested methods for providing our students with a sound knowledge of fundamental engineering disciplines and, at the same time, to introduce our students to exciting and relevant engineering situations and sceneries where social and business skills, such as communication skills, team-working or decision-taking, can be put into practice.

Problemática estructural y de funcionamiento de la cadena de valor del jamón ibérico de bellota: el caso de Guijuelo en España

El sector porcino ibérico es un sector típicamente español. La imagen que asocia el consumidor a los productos ibéricos es la correspondiente a los productos elaborados a partir de cerdos ibéricos en explotaciones extensivas, (dehesas), y cebados en montanera. Sin embargo, según los datos publicados por el Ministerio de Agricultura, Alimentación y Medio Ambiente, más de un 70 por ciento de los cerdos ibéricos que se producen en España son criados en granjas intensivas. El sector porcino ibérico está en pleno proceso de cambio, tanto por las variaciones que se derivan de la crisis que sufre el sector, como por las modificaciones que se esperan en la norma de calidad, recientemente acordadas. En este entorno en el que existe una reducción importante de los márgenes comerciales en todos los eslabones de la cadena de valor del jamón ibérico de bellota, adquiere importancia el estudio de su estructura y funcionamiento, la determinación de los aspectos que mejoran la eficiencia económica a lo largo de la misma y su concordancia a lo largo de ella. Así mismo, un sector de los consumidores comienza a buscar productos de calidad, se interesa por productos con determinados etiquetados que garantizan la calidad o unas determinadas prácticas de producción y elaboración, como sucede con los productos ecológicos. Existen numerosos estudios sobre distintos aspectos del sector porcino ibérico, realizados por distintas instituciones, como universidades, instituciones privadas y proyectos europeos. En general, se centran en la mejora de la producción de los cerdos ibéricos o en la mejora de la elaboración de los jamones. La novedad de la investigación realizada en la presente Tesis Doctoral reside en el estudio de los aspectos que determinan la mayor eficiencia económica de la cadena de valor del jamón ibérico de bellota de la denominación de origen de Guijuelo, y en las características que aporta al jamón ibérico de bellota la producción ecológica frente a la convencional. Resumen Los objetivos planteados en esta investigación son la mejora de la cadena de valor del jamón ibérico de bellota de la denominación de origen de Guijuelo, mediante el estudio de la problemática estructural y de funcionamiento de la misma. Como objetivos específicos se proponen la mejora de la eficiencia económica en las relaciones comerciales entre los distintos eslabones de la cadena de valor, y el impulso de la oferta de los productos ecológicos de ibérico, mediante el estudio comparativo de las producciones convencionales y ecológicas. Para alcanzar estos objetivos la metodología utilizada es la cadena de valor agroalimentaria, utilizando como herramientas de análisis el método Delphi y la realización de un análisis DAFO del sector porcino ibérico. Las fuentes de información primarias utilizadas proceden por una parte de la colaboración realizada en el proyecto europeo Q-Porkchains, coordinado por el Dr. Jacques H. Trienekens, y por otra parte de los cuestionarios especialmente diseñados para el análisis Delphi realizado. Las fuentes de información secundarias proceden de artículos académicos publicados, de artículos de revistas especializadas en el sector y de informes y estadísticas publicados por el Ministerio de Agricultura, Alimentación y Medio Ambiente. Las conclusiones de la investigación son las siguientes. Las relaciones comerciales de la cadena de valor estudiada están gestionadas, ya que se otorga gran valor a las relaciones comerciales basadas en la confianza, tanto en el aprovisionamiento de productos como en la venta de los mismos en cada eslabón. Sin embargo, no se gestiona adecuadamente la gama de productos que se oferta a lo largo de la cadena de valor, puesto que los eslabones de la misma obtienen diferente eficiencia económica para el mismo producto. Por otra parte, aunque la denominación de origen de Guijuelo es una marca conocida por el consumidor, el esfuerzo por tener una marca colectiva de calidad no ha sido totalmente satisfactorio, en especial para el eslabón de la distribución. Por esta razón, es importante resaltar que es recomendable la creación de una marca propia que cuide la calidad con especial atención, modificando incluso las empresas integrantes de la cadena de valor si el objetivo de calidad no coincide. Es importante garantizar la calidad del producto al consumidor, mediante la trasmisión la información generada por los informes de inspección y certificación realizados por las entidades correspondientes en relación a la norma de calidad de los productos de cerdo ibérico y por el Consejo Regulador de Guijuelo. Se requiere un estudio detallado de los posibles nichos de mercado para llegar a los clientes que buscan un producto de calidad diferenciada como es el jamón ibérico de denominación de origen de Guijuelo. Dentro de los posibles clientes debe tenerse en consideración al colectivo de personas alérgicas, ya que no se encuentran con facilidad en el mercado productos cárnicos de cerdo libres de alérgenos. Por último, la innovación es muy importante en este sector, y pueden ofertarse nuevos productos que ayuden al acortamiento de la cadena de valor, como podría ser la carne fresca de cerdo ibérico de bellota. La producción ecológica de porcino ibérico, en la actualidad no es significativa. El manejo que se realiza de los cerdos ibéricos convencionales de bellota es muy similar al manejo que se realiza de los cerdos ecológicos, salvo en la alimentación que reciben los cerdos ibéricos antes del cebo en montanera y en los medicamentos permitidos en ambas producciones. La producción de porcino ecológico de bellota puede ser interesante para la exportación. Los jamones ibéricos de bellota dispondrían de un sello que garantiza un manejo tradicional –como se realiza en muchas explotaciones extensivas de cerdos ibéricos de bellota-, y que es apreciado por los consumidores de otros países, dispuestos a pagar por productos de calidad diferenciada. Este tipo de producción quizá podría solventar la limitación al ámbito nacional de la norma de calidad de los productos de cerdo ibérico. La falta de claridad y unanimidad en el sector sobre la calidad de los productos de ibéricos que se percibe en los cambios previstos en la legislación, y el interés del eslabón de la industria elaboradora de jamones en calidades no ligadas a producciones extensivas sino intensivas, por su mayor volumen de ventas y sus mejores rendimientos, mueven a los productores de “ibérico puro de bellota” a desmarcarse del sector “ibérico”, donde el peso del producto ibérico cruzado de pienso tiene mucho peso en las decisiones que se toman. The Iberian pork industry is a typically Spanish industry. The associated image by the consumer to these products corresponds to products made from Iberian pigs in extensive farms (meadows), and fattened in open range. However, according to data released by the Ministry of Agriculture, Food and Environment, more than 70 percent of the Iberian pigs produced in Spain are raised on factory farms. The Iberian pork industry is in process of change, both by modifications resulting from the crisis in the sector, and the expected ones in the quality standard, recently agreed. In this environment where there is a significant reduction in trade margins in all links of the value chain of Iberian ham, becomes important to study its structure and operation, identifying the aspects that improve economic efficiency along the value chain and their concordance along it. Likewise, part of the consumers begins searching for quality products, they are interested in certain products that guarantee some sort of quality or production and processing practices, like organic products. There are several studies on various aspects of the Iberian pork industry, made by different institutions, such as universities, private institutions and some European projects. In general, their goal is focused on improving the Iberian hog production or on improving the elaboration of hams. The novelty of the research conducted in this PhD thesis lies in the study of the aspects that determine the economic efficiency of the value chain of Iberian ham from Guijuelo designation of origin, and the comparison between the features that organic or conventional production of Iberian ham brings to it. The objectives propound in this research are the improvement of the value chain of Iberian ham from Guijuelo designation of origin, through the study of its structural and operational problematic. The proposed specific objectives are the improvement of the economic efficiency Resumen in trade relations between the different links in the value chain, and the promotion of the supply of Iberian organic pork products, through the comparative study of conventional and organic productions. In order to achieve these objectives, the used methodology is the agrifood value chain, using as analysis tools the Delphi method, and a SWOT analysis of the Iberian pork industry. The primary sources of information come partly from the collaboration in the European project Q-Porkchains, coordinated by Dr. Jacques Trienekens, and partly from the questionnaires specially designed for the Delphi analysis performed. The secondary sources come from published academic papers, specialized journal articles and reports published by the Ministry of Agriculture, Food and Environment. The research conclusions are as follows. Trade relations in the studied value chain are managed, as it is granted a great value to business relationships based on trust, both in the supply of products and in the sale in each link. However, the portfolio that is offered throughout the value chain is not properly managed, since the economic efficiency obtained for the same product is different in each link. Moreover, although the designation of origin of Guijuelo is a well-known brand, the effort made to acquire a collective quality trademark has not been entirely satisfactory, especially in the distribution link. Due to it, it is important to highlight that it is recommended to create a brand focused on quality, and indeed to change the firms integrating the vale chain, if the goal is not shared by all the companies. It is essential to ensure the quality of the product to the consumer, through the transmission of the available information related to the quality standard of Iberian pork products and of the Guijuelo Regulating Council. A detailed study of potential niche markets is required, in order to reach customers looking for a differentiated quality product as Iberian ham of Guijuelo designation of origin. It should be taken into consideration the group of allergy sufferers as potential customers, as they do not easily find pork products in the market free of allergens. Innovation is very important in this industry, and new products could be commercialized that help to shorten the value chain, as fresh acorn Iberian pork. Nowadays, the organic production of Iberian pork products is not significant. The operation is very similar in both conventional and organic production of Iberian pork products, except in the food received by Iberian hogs and the sort of medicinal treatments allowed in each production. The organic acorn Iberian pork production could be interesting for export. Acorn Iberian hams would have a well-known hallmark, which guarantees a traditional production, -as it is done in many extensive holdings of Iberian acorn-pigs-, and that is appreciated by consumers in other countries This niche of consumers could pay for differentiated quality products. Perhaps, this sort of production could solve the limitation to national scope of the quality standard of Iberian pork products. The lack of clarity and unanimity in the industry on the quality of Iberian pork products has been perceived in the agreed changes of the legislation as well as the interest of the processing industry in hams of quality categories which are not linked to extensive but intensive productions, due to their higher sales volume and better yields. This situation pushed "acorn pure Iberian " pigs farmers to split from the Iberian industry, where the importance of cross Iberian pig from intensive farms is growing so high that they can influence the negotiations and decisions taken inside and outside the industry.

The Way of Significant Innovation: When Gutenberg Became Nonlinear

Nowadays, online learning is booming. Really "booming", actually: thousands of online courses, hundreds of researching groups, dozens of universities online. Eventually, Web Based Learning has left the labs, and begun a fruitful life in the "real world". However,quantity has little to do with "real innovation". In very rare occasions, online courses and teaching institutions are breaking with the rules of the Gutenberg Galaxy: the rules developed during five centuries of printing books. They are designed on a linear basis,and based on conventional text.

A comparative analysis of ABE Bachelor of Science programs in European and US Universities.

European Universities are involved in series of great changes regarding teaching and education organization during the last few years. The origin of these changes is the creation of the so-called European Higher Education Area (EHEA), which main target is to harmonize the different University studies throughout Europe. As a consequence, most of the programs of studies in all degrees are suffering changes in order to converge to common structures. Taking advantage of the actual process, some European universities are moving from traditional Agricultural Engineering programs to a more wide discipline named recently as Biosystems Engineering, which is a science- based engineering discipline that integrates engineering science and design with applied biological, environmental and agricultural sciences, broadening in this way the area of application of Engineering sciences not strictly to agricultural sciences, but to the biologic al sciences in general, including the agricultural sciences. This paper presents a comparative study of different Bachelor of Science degrees offered by American and European Universities in the field of Agricultural/Biosystems Engineering. To carry out the analysis 40 programs accredited by ABET in American Universities and 50 European programs. Among other questions, the total number of credits, the number of semesters, the kind of modules and the distribution of subjects in groups (Basic Sciences, Engineering Fundamentals, Agricultural/Biological Sciences, Humanities & Economic Sciences, Applied Agricultural/Biological Engineering and electives) are discussed in the paper. The information provided can be an useful starting point in future definitions of new or renewed degrees with the aim of advancing in internationalization of the programs and helping student’s mobility.

Validation of a novel approach to subjective quality evaluation of conventional and 3D broadcasted video services

Transmission errors are the main cause of degradation of the quality of real broadcasted video services. Therefore, knowing their impact on the quality of experience of the end users is a crucial issue. For instance, it would help to improve the performance of the distribution systems, and to develop monitoring tools to automatically estimate the quality perceived by the end users. In this paper we validate a subjective evaluation approach specifically designed to obtain meaningful results of the effects of degradations caused by transmission errors. This methodology has been already used in our previous works with monoscopic and stereoscopic videos. The validation is done by comparing the subjective ratings obtained for typical transmission errors with the proposed methodology and with the standard method Absolute Category Rating. The results show that the proposed approach could provide more representative evaluations of the quality of experience perceived by end users of conventional and 3D broadcasted video services.

Aerodynamic study of a blended wing body, comparison with a conventional transport airplane.

Blended-wing-body (BWB) aircraft are being studied with interest and effort to improve economic efficiency and to overcome operational and infrastructure related problems associated to the increasing size of conventional transport airplanes. The objective of the research reported here is to assess the aerodynamic feasibility and operational efficiency of a great size, blended wing body layout, a configuration which has many advantages. To this end, the conceptual aerodynamic design process of an 800 seat BWB has been done completed with a comparison of performance and operational issues with last generation of conventional very large aircraft. The results are greatly encouraging and predict about 20 percent increase in transport productivity efficiency, without the burden of new or aggravated safety or operational problems.

Multiplexing QKD systems in Conventional Optical Networks

Current QKD designs try to keep the quantum channel as error free as possible by using a separate physical medium for this purpose. In the most common case, this means the exclusive use of an optical fiber for the quantum channel, precluding its use for any other purpose. In current optical networks, the fiber is the single most expensive element and this poses a major problem from a cost and availability point of view. Sharing the fiber is thus mandatory for the widespread adoption of QKD. The objective of this communication is to propose a general scheme and present some preliminary measurements of a metropolitan area network (MAN) designed to multiplex of the order of 64 addressable quantum channels and the associated QKD classical service signals on a single dark fibre. It uses as much existing components and infraestructure as possible in an attempt to simultaneously lower most of the practical barriers for the adoption of QKD.

Soil P and cation availability and crop uptake in a forage rotation under conventional and reduced tillage

Long-term conservation tillage can modify vertical distribution of nutrients in soil profiles and alter nutrient availability and yields of crops.

A partial study of vertical distribution of conventional no-till seeders and spatial variability of seed depth placement of maize in the Alentejo region, Portugal

The requirements for a good stand in a no-till field are the same as those for conventional planting as well as added field and machinery management. Among the various factors that contribute towards producing a successful maize crop, seed depth placement is a key determinant. Although most no-till planters on the market work well under good soil and residue conditions, adjustments and even modifications are frequently needed when working with compacted or wet soils or with heavy residues. The main objective of this study, carried out in 2010, 2011 and 2012, was to evaluate the vertical distribution and spatial variability of seed depth placement in a maize crop under no-till conditions, using precision farming technologies and conventional no-till seeders. The results obtained indicate that the seed depth placement was affected by soil moisture content and forward speed. The seed depth placement was negatively correlated with soil resistance and seeding depth had a significant impact on mean emergence time and the percentage of emerged plants. Shallow average depth values and high coefficients of variation suggest a need for improvements in controlling the seeders’ sowing depth mechanism or more accurate calibration by operators in the field.

Contribute to the Study of Vertical Distribution of Conventional No-Till Seeders and Spatial Variability of Seed Depth Placement of Maize in Alentejo, Portugal

Entre os vários fatores que contribuem para a produção de uma cultura de milho, a distribuição vertical dos semeadores avaliada através da localização da semente em profundidade é um fator-chave, especialmente na técnica de sementeira direta. Simultaneamente, dada a complexidade dos ecossistemas naturais e agrícolas em sistemas de agricultura de conservação, a gestão diferenciada e localizada das parcelas assume um importante papel na análise e gestão da variabilidade das propriedades do solo e estabelecimento das culturas, nomeadamente utilizando informação geo referenciada e tecnologia expedita. Assim, o principal objetivo desta Tese foi a avaliação em culturas de milho da variabilidade espacial da localização de semente em profundidade e estabelecimento da cultura em sementeira direta usando sistemas convencionais de controlo de profundidade, tendo-se comparado com diferentes sistemas de mobilização e recorrendo a tecnologias de agricultura de precisão. Os ensaios decorreram na região Mediterrânea do Alentejo, em propriedades agrícolas no decorrer das campanhas de 2010, 2011, 2012 e 2015 em 6 diferentes campos experimentais. O trabalho experimental consistiu em ensaios com avaliações in loco do solo e cultura, consumo de combustível das operações e deteção remota. Os resultados obtidos indicam que não só o sistema de mobilização afetou a localização da semente em profundidade, como em sementeira direta a profundidade de sementeira foi afetada pelo teor de humidade do solo, resistência do solo à profundidade e velocidade da operação de sementeira. Adicionalmente observaram-se condições heterogéneas de emergência e estabelecimento da cultura afetadas por condições físicas de compactação do solo. Comparando os diferentes sistemas de mobilização, obteve-se uma significativa redução de combustível para a técnica de sementeira direta, apesar de se terem observado diferenças estatísticas significativas considerando diferentes calibrações de profundidade de sementeira Do trabalho realizado nesta Tese ressalva-se a importância que as tecnologias de agricultura de precisão podem ter no acompanhamento e avaliação de culturas em sementeira direta, bem como a necessidade de melhores procedimentos no controlo de profundidade dos semeadores pelo respetivos operadores ou ao invés, a adoção de semeadores com mecanismos ativos de controlo de profundidade. ABSTRACT Among the various factors that contribute towards producing a successful maize crop, seeders vertical distribution evaluated through seed depth placement is a key determinant, especially under a no-tillage technique. At the same time in conservation agriculture systems due to the complexity of natural and agricultural ecosystems site specific management became an important approach to understand and manage the variability of soil properties and crop establishment, especially when using geo spatial information and affording readily technology Thus, the main objective of this Thesis was to evaluate the spatial variability of seed depth placement and crop establishment in maize crops under no-tillage conditions compared to different tillage systems, using conventional seed depth control no till seeders and precision farming technologies. Trials were carried out in the Mediterranean region of Alentejo, in private farms along the sowing operations season over the years 2010, 2011, 2012 and 2015 in 6 different experimental fields. Experimental work covered field tests with in loco soil and crop evaluations, fuel operation evaluations and aerial sensing. The results obtained indicate that not only tillage system affected seed depth placement but under no till conditions seed depth was affected by soil moisture content, soil resistance to penetration and seeders forward speed. In addition uneven crop seedling and establishment depended on seed depth placement and could be affected by physical problems of compaction layers. Significant reduction in fuel consumption was observed for no till operations although significant differences observed according to different setting calibrations of seed depth control. According to the results, precision agriculture is an important tool to evaluate crops under no till conditions and seed depth mechanisms should be more accurate by the operators or is determinant the adoption of new active depth control technology to improve seeders performance.