Characterization of the volatile profile of Brazilian Merlot wines through comprehensive two dimensional gas chromatography time-of-flight mass spectrometric detection.

Wine aroma is an important characteristic and may be related to certain specific parameters, such as raw material and production process. The complexity of Merlot wine aroma was considered suitable for comprehensive two-dimensional gas chromatography (GCGC), as this technique offers superior performance when compared to one-dimensional gas chromatography (1D-GC). The profile of volatile compounds of Merlot wine was, for the first time, qualitatively analyzed by HS-SPME-GCxGC with a time-of-flight mass spectrometric detector (TOFMS), resulting in 179 compounds tentatively identified by comparison of experimental GCxGC retention indices and mass spectra with literature 1D-GC data and 155 compounds tentatively identified only by mass spectra comparison. A set of GCGC experimental retention indices was also, for the first time, presented for a specific inverse set of columns. Esters were present in higher number (94), followed by alcohols (80), ketones (29), acids (29), aldehydes (23), terpenes (23), lactones (16), furans (14), sulfur compounds (9), phenols (7), pyrroles (5), C13-norisoprenoids (3), and pyrans (2). GCxGC/TOFMS parameters were improved and optimal conditions were: a polar (polyethylene glycol)/medium polar (50% phenyl 50% dimethyl arylene siloxane) column set, oven temperature offset of 10ºC, 7 s as modulation period and 1.4 s of hot pulse duration. Co-elutions came up to 138 compounds in 1D and some of them were resolved in 2D. Among the coeluted compounds, thirty-three volatiles co-eluted in both 1D and 2D and their tentative identification was possible only due to spectral deconvolution. Some compounds that might have important contribution to aroma notes were included in these superimposed peaks. Structurally organized distribution of compounds in the 2D space was observed for esters, aldehydes and ketones, alcohols, thiols, lactones, acids and also inside subgroups, as occurred with esters and alcohols. The Fischer Ratio was useful for establishing the analytes responsible for the main differences between Merlot and non-Merlot wines. Differentiation among Merlot wines and wines of other grape varieties were mainly perceived through the following components: ethyl dodecanoate, 1-hexanol, ethyl nonanoate, ethyl hexanoate, ethyl decanoate, dehydro-2-methyl-3(2H)thiophenone, 3-methyl butanoic acid, ethyl tetradecanoate, methyl octanoate, 1,4 butanediol, and 6-methyloctan-1-ol.

Comprehensive analysis of regulatory elements of maize Phosphorus-Starvation Tolerance 1.

2016

Occupant health and productivity : an Australian perspective

The issue of whether improved building services such as air quality, provision of daylight, thermal comfort etc, have a positive impact on the health and productivity of building occupants is still an open question. There is significant anecdotal evidence supporting the notion that health and productivity of building occupants can be improved by improving the quality of the indoor environment, but there are actually few published quantitative studies to substantiate this contention. This paper reports on a comprehensive review of the worldwide literature which relates health of building occupants with the different aspects of the indoor environment which are believed to impact of these issues, with a particular focus on studies in Australia, The paper analyses the existing research and identifies the key deficiencies in our existing understanding of this problem. The key focus of this research is office and school buildings, but the scope of the literature surveyed includes all commercial buildings, including industrial buildings. There is a notable absence of detailed studies on this link in Australian buildings, although there are studies on thermal comfort, and a number of studies on indoor air quality in Australia, which do not make the connection to health and productivity. Many international studies have focused on improved lighting, and in particular the provision of daylight in buildings, but again there are few studies in Australia which focus in this area.

Testing a framework for the quality of process models: A case study

Process modeling can be regarded as the currently most popular form of conceptual modeling. Research evidence illustrates how process modeling is applied across the different information system life cycle phases for a range of different applications, such as configuration of Enterprise Systems, workflow management, or software development. However, a detailed discussion of critical factors of the quality of process models is still missing. This paper proposes a framework consisting of six quality factors, which is derived from a comprehensive literature review. It then presents in a case study, a utility provider, who had designed various business process models for the selection of an Enterprise System. The paper summarizes potential means of conducting a successful process modeling initiative and evaluates the described modeling approach within the Guidelines of Modeling (GoM) framework. An outlook shows the potential lessons learnt, and concludes with insights to the next phases of this study.

Towards a Business Process Management Maturity Model

Business Process Management (BPM) has been identified as the number one business priority by a recent Gartner study (Gartner, 2005). However, BPM has a plethora of facets as its origins are in Business Process Reengineering, Process Innovation, Process Modelling, and Workflow Management to name a few. Organisations increasingly recognize the requirement for an increased process orientation and require appropriate comprehensive frameworks, which help to scope and evaluate their BPM initiative. This research project aims toward the development of a holistic and widely accepted BPM maturity model, which facilitates the assessment of BPM capabilities. This paper provides an overview about the current model with a focus on the actual model development utilizing a series of Delphi studies. The development process includes separate studies that focus on further defining and expanding the six core factors within the model, i.e. strategic alignment, governance, method, Information Technology, people and culture.

Size distribution and sites of origin of droplets expelled during expiratory activities

A new Expiratory Droplet Investigation System (EDIS) was used to conduct the most comprehensive program of study to date, of the dilution corrected droplet size distributions produced during different respiratory activities.----- Distinct physiological processes were responsible for specific size distribution modes. The majority of particles for all activities were produced in one or more modes, with diameters below 0.8 µm. That mode occurred during all respiratory activities, including normal breathing. A second mode at 1.8 µm was produced during all activities, but at lower concentrations.----- Speech produced particles in modes near 3.5 µm and 5 µm. The modes became most pronounced during continuous vocalization, suggesting that the aerosolization of secretions lubricating the vocal chords is a major source of droplets in terms of number.----- Non-eqilibrium droplet evaporation was not detectable for particles between 0.5 and 20 μm implying that evaporation to the equilibrium droplet size occurred within 0.8 s.

Key performance indicators for measuring construction success

The construction industry is dynamic in nature. The concept of project success has remained ambiguously defined in the construction industry. Project success is almost the ultimate goal for every project. However, it means different things to different people. While some writers consider time, cost and quality as predominant criteria, others suggest that success is something more complex. The aim of this paper is to develop a framework for measuring success of construction projects. In this paper, a set of key performance indicators (KPIs), measured both objectively and subjectively are developed through a comprehensive literature review. The validity of the proposed KPIs is also tested by three case studies. Then, the limitations of the suggested KPIs are discussed. With the development of KPIs, a benchmark for measuring the performance of a construction project can be set. It also provides significant insights into developing a general and comprehensive base for further research.

Story Circle : Digital Storytelling Around the World

Story Circle is the first collection ever devoted to a comprehensive international study of the digital storytelling movement. Exploring subjects of central importance on the emergent and ever-shifting digital landscape-consumer-generated content, memory grids, the digital storytelling youth movement, and micro-documentary- Story Circle pinpoints who is telling what stories, where, on what terms, and what they look and sound like.

The way forward : report on the preparatory phase of prefabricated building design and construction methodology: identifying critical issues and recommending the way forward

This is an initial report of the PolyU SD part of the team to study Pre-fabricated Building Design and Construction Methodology and marks the completion of Phase 1. It follows our first notes prepared for the meeting on 2 February that identified some critical issues including future lifestyles, life expectancy of buildings, sustainability, size, flexibility and planning considerations. It is also an expansion of our presentation in Dongguan on 23 February. It is not a comprehensive survey of existing approaches or possible ways forward, but it has homed in on certain specific issues and does give specific examples to make the suggestions concrete. It is recommended that more comprehensive research be done to establish previous work and experience internationally. It is also recommended that more research be done on lifestyles as a preliminary to developing at least three concepts for evaluation before proceeding to the detailed design of one concept for full prototyping and market testing. The goal at this point is not to define a single direction but to suggest several future trajectories for further consideration. By the same token, this report is not intended as an exhaustive description of the considerable base of knowledge and ideas brought by the PolyU team to this exciting task. Before taking on an issue of this magnitude and importance in the definition of Hong Kong's future, one must carry out a thoughtful analysis of the issues at hand and an informed definition of paradigms, directions, goals and methods whereby our energies can be best used in the next steps. This report is the result of this analysis

Applying an equity lens to tobacco-control policies and their uptake in six western-european countries

We identified policies that may be effective in reducing smoking among socioeconomically disadvantaged groups, and examined trends in their level of application between 1985 and 2000 in six western-European countries (Sweden, Finland, the United Kingdom, the Netherlands, Germany, and Spain). We located studies from literature searches in major databases, and acquired policy data from international data banks and questionnaires distributed to tobacco policy organisations/researchers. Advertising bans, smoking bans in workplaces, removing barriers to smoking cessation therapies, and increasing the cost of cigarettes have the potential to reduce socioeconomic inequalities in smoking. Between 1985 and 2000, tobacco control policies in most countries have become more targeted to decrease the smoking behaviour of low-socioeconomic groups. Despite this, many national tobacco-control strategies in western-European countries still fall short of a comprehensive policy approach to addressing smoking inequalities.

Gendered perceptions of experiential value in using web-based retail channels

Purpose – This paper compares the experiential consumption values that motivate consumer choice to purchase online for both male and female purchasers and non-purchasers. Design/methodology/approach – Using the theory of consumption value the study examines gendered perceptions of the functional, social and conditional value of using a virtual consumption setting for purchasing. Data was collected through an online survey and analysed using multiple discriminant analysis to determine meaningful differences between male and female purchasers and non-purchasers. Findings – The findings show that male online purchasers are discriminated from female purchasers by social value and from male non-purchasers by conditional value. Female purchasers are discriminated from male purchasers by functional value and from female non-purchasers by social value. Female non-purchasers are discriminated from female purchasers by conditional value. Male non-purchasers are discriminated from male purchasers by functional and social value. Research limitations/implications – Limitations include using an Internet survey and an Australian sample which may impact the generalisability of the findings to a wider population of Internet users. Future research should involve replication of the study in a country more or less developed in terms of gender composition of internet users to extend the generalisability of the findings. Additionally, researchers should examine whether other dimensions of consumption value,such as social influence through on- and off-line communication networks, may influence consumer choice to purchase online. Practical implications – The study provides practical implications for marketers to leverage consumption values that influence male and female consumers’ choice to purchase online and then drive their behaviour online through integrated marketing campaigns that involve both on- and offline strategies. Originality/value – The research makes an original contribution to the consumer behaviour literature as to date, no research has been found that undertakes such a comprehensive gender-based comparison of the perceived value of using a virtual consumption setting for purchasing.

IT professionals' experience of ethics and its implications for IT education

This study investigates variation in IT professionals' experience of ethics with a view to enhancing their formation and support. This is explored through an examination of the experience of IT, IT professional ethics and IT professional ethics education. The study's principal contribution is the empirical study and description of IT professionals' experience of ethics. The empirical phase is preceded by a review of conceptions of IT and followed by an application of the findings to IT education. The study's empirical findings are based on 30 semi-structured interviews with IT professionals who represent a wide demographic, experience and IT sub-discipline range. Their experience of ethics is depicted as five citizenships: Citizenship of my world, Citizenship of the corporate world, Citizenship of a shared world, Citizenship of the client's world and Citizenship of the wider world. These signify an expanding awareness, which progressively accords rights to others and defines responsibility in terms of others. The empirical findings inform a Model of Ethical IT. This maps an IT professional space increasingly oriented towards others. Such a model provides a conceptual tool, available to prompt discussion and reflection, and which may be employed in pursuing formation aimed at experiential change. Its usefulness for the education of IT professionals with respect to ethics is explored. The research approach employed in this study is phenomenography. This method seeks to elicit and represent variation of experience. It understands experience as a relationship between a subject (IT professionals) and an object (ethics), and describes this relationship in terms of its foci and boundaries. The study's findings culminate in three observations, that change is indicated in the formation and support of IT professionals in: 1. IT professionals' experience of their discipline, moving towards a focus on information users; 2. IT professionals' experience of professional ethics, moving towards the adoption of other-centred attitudes; and 3. IT professionals' experience of professional development, moving towards an emphasis on a change in lived experience. Based on these results, employers, educators and professional bodies may want to evaluate how they approach professional formation and support, if they aim to promote a comprehensive awareness of ethics in IT professionals.

Queensland's Smart State Initiative : a successful knowledge based urban development strategy

The chapter will set out to explain the KBUD and urban policy making processes in Queensland, Australia. This chapter will draw on providing a clear understanding on policy frameworks and relevant ICT applications of the Queensland ‘Smart State’ experience. The chapter is consisted of six sections. The first section following the introduction provides background information. The second section focuses on the KBUD processes in Queensland. The third section offers a comprehensive analysis of the ‘Queensland Smart State’ initiative, and it also identifies actors and goals of the agenda of Smart State experience. The fourth section reviews knowledge based development and ICT applications and policies of the Queensland Smart State and Brisbane Smart City experiences, and their impacts on Brisbane’s successful KBUD. The fifth section discusses knowledge hubs and ICT developments within the Brisbane metropolitan area. Then the chapter concludes with future trends and conclusion sections.

Towards ubiquitous city : concept, planning, and experiences in the Republic of Korea

Information and communication technologies (ICTs) had occupied their position on knowledge management and are now evolving towards the era of self-intelligence (Klosterman, 2001). In the 21st century ICTs for urban development and planning are imperative to improve the quality of life and place. This includes the management of traffic, waste, electricity, sewerage and water quality, monitoring fire and crime, conserving renewable resources, and coordinating urban policies and programs for urban planners, civil engineers, and government officers and administrators. The handling of tasks in the field of urban management often requires complex, interdisciplinary knowledge as well as profound technical information. Most of the information has been compiled during the last few years in the form of manuals, reports, databases, and programs. However frequently, the existence of these information and services are either not known or they are not readily available to the people who need them. To provide urban administrators and the public with comprehensive information and services, various ICTs are being developed. In early 1990s Mark Weiser (1993) proposed Ubiquitous Computing project at the Xerox Palo Alto Research Centre in the US. He provides a vision of a built environment which digital networks link individual residents not only to other people but also to goods and services whenever and wherever they need (Mitchell, 1999). Since then the Republic of Korea (ROK) has been continuously developed national strategies for knowledge based urban development (KBUD) through the agenda of Cyber Korea, E-Korea and U-Korea. Among abovementioned agendas particularly the U-Korea agenda aims the convergence of ICTs and urban space for a prosperous urban and economic development. U-Korea strategies create a series of U-cities based on ubiquitous computing and ICTs by a means of providing ubiquitous city (U-city) infrastructure and services in urban space. The goals of U-city development is not only boosting the national economy but also creating value in knowledge based communities. It provides opportunity for both the central and local governments collaborate to U-city project, optimize information utilization, and minimize regional disparities. This chapter introduces the Korean-led U-city concept, planning, design schemes and management policies and discusses the implications of U-city concept in planning for KBUD.

Value-oriented process modeling : integrating financial perspectives into business process re-design

Purpose – Financial information about costs and return on investments are of key importance to strategic decision-making but also in the context of process improvement or business engineering. In this paper we propose a value-oriented approach to business process modeling based on key concepts and metrics from operations and financial management, to aid decision making in process re-design projects on the basis of process models. Design/methodology/approach – We suggest a theoretically founded extension to current process modeling approaches, and delineate a framework as well as methodical support to incorporate financial information into process re-design. We use two case studies to evaluate the suggested approach. Findings – Based on two case studies, we show that the value-oriented process modeling approach facilitates and improves managerial decision-making in the context of process re-design. Research limitations / implications – We present design work and two case studies. More research is needed to more thoroughly evaluate the presented approach in a variety of real-life process modeling settings. Practical implications – We show how our approach enables decision makers to make investment decisions in process re-design projects, and also how other decisions, for instance in the context of enterprise architecture design, can be facilitated. Originality/value – This study reports on an attempt to integrate financial considerations into the act of process modeling, in order to provide more comprehensive decision making support in process re-design projects.