833 resultados para Bug-ware
Resumo:
Objective: To evaluate the planning and quality of plaster models for fabricati on of removable parti al dentures received from three commercial prosthodonti c laboratories located in the city of João Pessoa, PB, Brazil, which perform the casting procedures in their facilities. Methods: Forty 40 plaster models were photographed per laboratory, totalizing 120 models. The evaluation was performed using two questi onnaires, one designed for the dental prosthesis technicians, and another applied by the investigator for the visual evaluati on of the models. Data were analyzed using the SPSS soft ware version 13.0. Results: Ninety-two (76.7%) models did not present planning. In addition, no model presented references of insertion plane or guide pins. Calculati on of the mouth preparati on index (MPI) to evaluate the distribution of the oclusal and cingulum abutments or rests showed that 86 (71.7%) models were classifi ed as poor, 23 (19.2%) models as good and only 11 (9,.2%) models as acceptable. Defects were found in 102 (85%) models. Conclusion: The prosthodontists are not preparing the mouth of their pati ents, neglecti ng the planning of removable partial dentures, and passing this responsibility to the dental prosthesis technicians. In addition, the quality of the models sent to the laboratories was unsatisfactory.
Resumo:
Software bug analysis is one of the most important activities in Software Quality. The rapid and correct implementation of the necessary repair influence both developers, who must leave the fully functioning software, and users, who need to perform their daily tasks. In this context, if there is an incorrect classification of bugs, there may be unwanted situations. One of the main factors to be assigned bugs in the act of its initial report is severity, which lives up to the urgency of correcting that problem. In this scenario, we identified in datasets with data extracted from five open source systems (Apache, Eclipse, Kernel, Mozilla and Open Office), that there is an irregular distribution of bugs with respect to existing severities, which is an early sign of misclassification. In the dataset analyzed, exists a rate of about 85% bugs being ranked with normal severity. Therefore, this classification rate can have a negative influence on software development context, where the misclassified bug can be allocated to a developer with little experience to solve it and thus the correction of the same may take longer, or even generate a incorrect implementation. Several studies in the literature have disregarded the normal bugs, working only with the portion of bugs considered severe or not severe initially. This work aimed to investigate this portion of the data, with the purpose of identifying whether the normal severity reflects the real impact and urgency, to investigate if there are bugs (initially classified as normal) that could be classified with other severity, and to assess if there are impacts for developers in this context. For this, an automatic classifier was developed, which was based on three algorithms (Näive Bayes, Max Ent and Winnow) to assess if normal severity is correct for the bugs categorized initially with this severity. The algorithms presented accuracy of about 80%, and showed that between 21% and 36% of the bugs should have been classified differently (depending on the algorithm), which represents somewhere between 70,000 and 130,000 bugs of the dataset.
Resumo:
Welding is one of the most employed process for joining steel pipes. Although, manual welding is still the most used one, mechanized version and even automatized one have increased its demand. Thus, this work deals with girth welding of API 5L X65 pipes with 8” of nominal diameter and 8.0 mm thickness, beveled with V-30º narrow gap. Torch is moved by a bug carrier (mechanized welding) and further the parameters are controlled as a function of angular position (automatized welding). Welding parameters are presented for filling the joint with two-passes (root and filling/capping passes). Parameters for the root pass were extracted from previous author´s work with weldments carried out in plates, but validated in this work for pipe welding. GMAW processes were assessed with short-circuit metal transfer in both conventional and derivative modes using different technologies (RMD, STT and CMT). After the parameter determination, mechanical testing was performed for welding qualification (uniaxial tension, face and root bending, nick break, Charpy V-notch impact, microhardness and macrograph). The initially obtained results for RMD and CMT were acceptable for all testing and, in a second moment, also for the STT. However, weld beads carried out by using the conventional process failed and revealed the existence of lack of fusion, which required further parametrization. Thus, a Parameter-Variation System for Girth Welding (SVP) was designed and built to allow varying the welding parameters as a function of angular position by using an inclinometer. The parameters were set for each of the three angular positions (flat, vertical downhill and overhead). By using such equipment and approach, the conventional process with parameter variation allowed reducing the welding time for joint accomplishment of the order of 38% for the root pass and 30% for the filling/capping pass.
Resumo:
The neoliberal period was accompanied by a momentous transformation within the US health care system. As the result of a number of political and historical dynamics, the healthcare law signed by President Barack Obama in 2010 ‑the Affordable Care Act (ACA)‑ drew less on universal models from abroad than it did on earlier conservative healthcare reform proposals. This was in part the result of the influence of powerful corporate healthcare interests. While the ACA expands healthcare coverage, it does so incompletely and unevenly, with persistent uninsurance and disparities in access based on insurance status. Additionally, the law accommodates an overall shift towards a consumerist model of care characterized by high cost sharing at time of use. Finally, the law encourages the further consolidation of the healthcare sector, for instance into units named “Accountable Care Organizations” that closely resemble the health maintenance organizations favored by managed care advocates. The overall effect has been to maintain a fragmented system that is neither equitable nor efficient. A single payer universal system would, in contrast, help transform healthcare into a social right.
Resumo:
Ageing of the population is a worldwide phenomenon. Numerous ICT-based solutions have been developed for elderly care but mainly connected to the physiological and nursing aspects in services for the elderly. Social work is a profession that should pay attention to the comprehensive wellbeing and social needs of the elderly. Many people experience loneliness and depression in their old age, either as a result of living alone or due to a lack of close family ties and reduced connections with their culture of origin, which results in an inability to participate actively in community activities (Singh & Misra, 2009). Participation in society would enhance the quality of life. With the development of information technology, the use of technology in social work practice has risen dramatically. The aim of this literature review is to map out the state of the art of knowledge about the usage of ICT in elderly care and to figure out research-based knowledge about the usability of ICT for the prevention of loneliness and social isolation of elderly people. The data for the current research comes from the core collection of the Web of Science and the data searching was performed using Boolean? The searching resulted in 216 published English articles. After going through the topics and abstracts, 34 articles were selected for the data analysis that is based on a multi approach framework. The analysis of the research approach is categorized according to some aspects of using ICT by older adults from the adoption of ICT to the impact of usage, and the social services for them. This literature review focused on the function of communication by excluding the applications that mainly relate to physical nursing. The results show that the so-called ‘digital divide’ still exists, but the older adults have the willingness to learn and utilise ICT in daily life, especially for communication. The data shows that the usage of ICT can prevent the loneliness and social isolation of older adults, and they are eager for technical support in using ICT. The results of data analysis on theoretical frames and concepts show that this research field applies different theoretical frames from various scientific fields, while a social work approach is lacking. However, a synergic frame of applied theories will be suggested from the perspective of social work.
Resumo:
Crisis communication is a widely treated field. There are lot of works and guides which provide helpful information in order to face crisis situations successfully (Alcat, 2005, Benoit, 1997) and articles about case studies (Nespereira, 2014, Blaney y Benoit 2001). Nonetheless, most of times, these guides are focused on business or corporations (Abeler, 2010) and there are not such information about crisis communications in politics (Gaspar e Ibeas, 2015). The field is smaller if we speak about forgiveness as restoration image tool in politics (Harris 2006). Despite all, we live in “forgiveness era” as Krauze said (1998) where people demand to politicians to apologize when they have mistakes (Harris et al. 2006:716). So, we will try to make an approach to forgiveness in politics as a image restoration tool and analyze its capabilities in order to face crisis management.
Resumo:
Analysis of the word lancea, of Hispanic origin after Varro, and of place names, people´s names and personal names derived from it. It confirms that the spear was the most important weapon in the Bronze Age, belonging to the iuventus and used as heroic and divine symbol. This analysis confirms also the personality of the Lusitanians, a people related to the Celts but with more archaic archaeological, linguistic and cultural characteristics originated in the tradition of the Atlantic Bronze in the II millennium BC. It is also relevant to better know the organisation of Broze and Iron Age societies and the origin of Indo-Europeans peoples in Western Europe and of pre-Roman peoples of Iberia.
Resumo:
Adolf Hitler suscitó desde su entrada en la escena política alemana una fascinación perversa, un sentimiento que, con el tiempo, ha dado lugar a numerosas representaciones culturales sobre el Führer. La muestra, rica y variada tanto en el fondo como en la forma, nos permitirá trazar tres estadios en lo referente al proceso de construcción historiográfica del hitlerismo, iniciado con la caída del Tercer Reich. Estos responden en buena medida al devenir sociopolítico y cultural de la sociedad a escala global desde el final de la guerra y hasta nuestros días y pueden resumirse en tres: primero, la satanización; segundo, la humanización; tercero, el retrato caricaturesco. Proponemos un recorrido histórico por diversos productos culturales del dictador alemán cuyo propósito es desentrañar el retrato psicológico poliédrico que se ha construido en torno a la figura de Hitler.
Resumo:
De bevolking in Vlaanderen veroudert aan een hoog tempo waardoor de bevolking die in een serviceflat woont toeneemt. Het verhuizen naar een serviceflat brengt grote veranderingen met zich mee die invloed hebben op het subjectief welbevinden van deze ouderen. Het doel van dit onderzoek is om na te gaan of er bij inwoners van een serviceflat in Vlaanderen een verband bestaat tussen veerkracht en subjectief welbevinden en tussen lichamelijke gezondheid en subjectief welbevinden en of deze laatste relatie gemodereerd wordt door het al dan niet hebben van veerkracht. In de onderzoekspopulatie zitten inwoners van een serviceflat uit alle Vlaamse provincies. Er werd gebruik gemaakt van een selecte steekproef op basis van vrijwillige respons. Daarnaast werd de sneeuwbalmethode gehanteerd, door aan de inwoners die de vragenlijst beantwoorden te vragen of zij iemand kenden die wilden meedoen aan het onderzoek. De onderzoeksgroep bestond uit 78 mannen (43.8%) en 100 vrouwen (56.2%). De gemiddelde leeftijd bedroeg 78,21 jaar. Het onderzoek liep van oktober 2014 tot april 2015. Voor dit onderzoek werd gebruik gemaakt van bestaande vragenlijsten. Het subjectief welbevinden werd gemeten met de SSWO-8 (Tempelman, 1986). Veerkracht werd gemeten met de BRS-NL (Leontjevas, de Beek, Lataster, & Jacobs, 2014). Lichamelijke gezondheid werd gemeten met de SF-12 (Ware & Sherbourne, 1992). Deze vragenlijsten werden afgenomen door de onderzoeker. Lichamelijke gezondheid is een belangrijke samenhangende factor met subjectief welbevinden (zie resultaat correlatie analyses), maar die samenhang verdwijnt wanneer er rekening wordt gehouden met de mate van veerkracht die iemand heeft. Uit de resultaten van de multiple regressie analyse komt naar voren dat er een geen positief verband bestaat tussen lichamelijke gezondheid en subjectief welbevinden. Veerkracht heeft geen significante modererende invloed op de relatie lichamelijke gezondheid en subjectief welbevinden. Er bestaat wel een rechtstreeks effect tussen het hebben van veerkracht en subjectief welbevinden. Dit onderzoek suggereert dat veerkracht een belangrijke invloed kan hebben op het subjectief welbevinden van inwoners van een serviceflat. Longitudinaal onderzoek met een aselecte steekproef kan het causale verband aantonen tussen deze variabelen.
Resumo:
A novel processing method for the fast and economic production of hollow ceramic components has been developed by combining in situ coagulation moulding with a modified version of the technique of rotary moulding[Binner, J. G. P., Al-Dawery, I. A., Tari, G. and Yan, Y., Rotary casting technique. UK Patent application No. 0506349.0, March 2005], the latter being adapted from the polymer industry. The process was found to require a high solids content suspension, hence development work was performed in this direction though in the end a new, commercial suspension was utilised. Of the three forming routes of gel casting, direct coagulation casting and in situ coagulation moulding, the latter was found to be the most promising for the new process of rotary moulding of ceramics. Due to the low value of clay-based ceramics, a new low cost coagulant was identified and the effect of lactone concentration and temperature on setting time determined. Following substantial optimisation work, it was found that a two-speed approach to multi-axial rotation was the most successful; medium sized cream jugs could be produced in just 7 min. With respect to mould materials, the porous resin normally used for pressure casting of sanitary ware was found to be the best option, though since this is quite expensive conventional plaster-of-paris moulds were found to be a suitable material to enable companies, particularly SMEs, to become familiar with the technology whilst avoiding high costs for trials. The processed articles could be successfully fired and glazed using gas-fired kilns with no sign of any black cores. Major advantages of the process include the ability to precisely calculate the amount of ceramic slip required, eliminating either slip wastage or the need to pour used slip back into the virgin material as currently happens with slip casting. In addition, since the precursor suspension has a very high solids content, the time and energy required to dry the green product and associated moulds has been considerably reduced. © 2008 Elsevier Ltd. All rights reserved.
Resumo:
Bakgrund: Alzheimers sjukdom (AD) är den vanligaste formen av demenssjukdomar och antalet människor som insjuknar i AD förväntas öka kraftigt med tiden. Dessutom kännetecknas personer med AD ofta av beteendemässiga och psykiska symtom (BPSD) som kan innefatta agitation, depression, vanföreställningar, oro, ångest, hallucinationer, sömnrubbningar, rastlöshet och apati. Dessa symtom kan orsaka lidande hos patienten och är svåra att hantera för både vårdgivaren och anhöriga, samt försvårar omvårdnadsarbetet. Syftet var att beskriva icke-farmakologiska metoder och effekter av dessa metoder vid omvårdnad av personer med Alzheimers sjukdom som har beteendemässiga och psykiska symtom. Metod: En litteraturöversikt bestående av 16 utvalda kvantitativa forskningsartiklar har genomförts. Artiklarna publicerades mellan år 2006-2016. Resultat. De studerade icke-farmakologiska metoderna var musikterapi, vissa typer av massage, reminiscence-terapi, vårdhundterapi och ljusterapi. Resultaten visade att icke-farmakologiska metoder kan ha en varierande effekt på BPSD. Litteraturöversikten visade att musikintervention var mest effektiv för att minska agitationsbeteende. Individualiserad musik i samband med speciella minnen minskade stress, fobier hos personer med svår demens. Intervention av handmassage, aromaterapi, taktil massage och terapeutisk beröring minskade aggression och agitationsbeteende. Vissa studier visade dock att fotmassageintervention och vårdhundterapi kunde öka verbal aggressivitet hos personer med demens, medan en annan studie visade att djurassisterade aktiviteter kunde minska nedstämdhet medan glädje och generell uppmärksamhet ökade. Effekten av ljusbehandling var förbättrad sömn, minskad depression, agitation och ätstörningar. Slutsats. Icke-farmakologiska metoder kan minska beteendemässiga och psykiska symtom hos personer med Alzheimers sjukdom, dock med varierande effekt. De varierande resultaten kan tolkas som att icke-farmakologiska metoder bör individanpassas och att det behövs vidare forskning inom området.
Resumo:
This work supports the formalist education s improvement of the Brazilian architect and urban designer through a better application and systematization of the computer science s teaching potentialities. The research analyzes the discipline introduction in the Brazilian courses: Computer Science Applied to Architecture and Urbanism (InfoAU) in the Architecture and Urbanism Courses of Brazil (CAUs). It goes since the discipline was obligated by the MEC s Regulation nr. 1.770 from 1994 until the CNE/CES Resolution nr. 6 from 2006; it comprehends the discipline implantation, development and current context, in order to get more detailed, the research analyses three federal universities from the Northeast of the country: UFRN, UFPB and UFPE. Once identified the historical educational needs in the CAUs, the study focus on the computer science s increasing potential as an agent of integration, communication, development and knowledge/data management. It points out new social perspectives for a better use of this tool/mechanism, which adequately structuralized and integrated, creates propitious educational and professional performance/recycling conditions and a propeller instrument of research and extension activities. Among this work, it is suggested the aggregation of elements, which are complementary to the InfoAU discipline s reorganization, throughout a computerization s plan for the CAUs, extensive to the professional formation, generating a virtuous cycle in several activities of the academic, administrative and, research and extension s departments. Therefore, the InfoAU in the Brazilian CAUs context was analyzed; the main solutions and problems found were systemized; the possibilities of computer science s uses inside AU ware structuralized, InfoAU discipline s improvement plan was also defined, as well as strategies for the implementation of the computerization s plan for the CAUs, which would guarantee its maintenance in a continuity perspective
Resumo:
Knowledge Exchange examined different routes in achieving the vision of 'having a layer of scholarly and scientific content openly available in the internet'. One of these routes involves exploring new developments in the future of publishing. Work is being undertaken investigating interesting alternative business models which could contribute to the transition to open access. In this light KE has commissioned a study investigating whether submission fees could play a role in a business model for Open Access journals. The general conclusion of the report bearing the title ‘Submission Fees a tool in the transition to open access?', written by Mark Ware, is that there are benefits to publishers in certain cases to switch to a model in which an author pays a fee when submitting an article. Especially journals with a high rejection rate might be interested in combining submission fees with article processing charges in order to make the transition to open access easier. In certain disciplines, notably economic and finance journals and in some areas of the experimental life sciences, submission fees are already common. Overall there seems to be an interest in the model but the risks, particularly those involved in any transition, are seen by the publishers to outweigh the perceived benefits. There is also a problem in that the advantages offered by submission fees are often general benefits that might improve the system but do not provide publishers and authors with direct incentives to change to open access. To support transition funders, institutions and publication funds could make it clear that submission fees would be an allowable cost. At present this is often unclear in their policies. Author acceptance of submission fees is critical to its success. It is an observable fact that authors will accept them in some circumstances. Author acceptance would require further study though. Based on the interviews and the modelling in the study one model in particular is regarded as the most suitable way to meet the current requirements (i.e. to strengthen open access to research publications). In this model authors pay a submission fee plus an Article Processing Fee and the article is subsequently made available in open access. Both fees are set at levels that balance acceptability with the author community with securing a meaningful mix of revenues for the Publisher.
Resumo:
Pädagogik als die Reflexionswissenschaft dieser Praxis der Erziehung und Bildung hat sich lange Zeit entsprechend darum bemüht, die relative Eigenständigkeit der pädagogischen Praxis gegenüber gesellschaftlichen Partikularinteressen auszulegen, zu begründen und zu verteidigen. Sie tat bzw. postulierte dies in der advokatorischen Zuständigkeit für das Recht der nachwachsenden Generation auf ihr Selbstsein, der pädagogisch angebahnten Verfügung über sich als Mündigkeit. Hier nun setzt die Frage an, ob – jenseits des bloßen Postulates – die Pädagogik als die Bildung eines Subjektes und die Erziehung zur Mündigkeit überhaupt noch genügend gesellschaftlich geerdet ist, damit sie als wirkmächtiger Faktor der Gestaltung und des Nachdenkens über Erziehung und Bildung bestehen kann. Gibt es diesen eigenen Geltungsbereich des Pädagogischen noch in zureichendem Maße, damit er nicht als bloß idealistische Einrede behandelt werden kann? Oder ist mit dem weltweiten Siegeszug des Neoliberalismus’ ein Maß an Kolonisierung des Pädagogischen eingetreten, das dieses nunmehr gänzlich unter das Verwertungsinteresse der Ware Arbeitskraft subsumiert werden kann? Eben: Adeus Pädagogik?! (DIPF/Orig.)
Resumo:
Thaumastocoris peregrinus (Hemiptera: Thaumastocoridae ) is an insect from Australia which is causing severe damage to eucalyptus crops around the world. When feeding from the leaves sap, it causes bronzening, and in extreme cases, may lead to the tree death. Control methods have been studied and the most promising so far is the egg parasitoid Cleruchoides noackae (Hymenoptera: Mymaridae). Alternative products from plants with insecticidal properties could also be a viable option, and they might even be used concomitantly with C. noackae, aiming for a most effective control, but still safe for the environment. Thus, the objective of this work was to verify the action of 5% aqueous plant extracts of Matricaria chamomilla, Echinodorus grandiflorus, Punica granatum, Maytenus ilicifolia a n d Origanum majorana on T. peregrinus. In addition, we aimed to study the extracts potential toxicity to C. noackae and Gallus domesticus L., since the plant compounds might have negative effect upon the non-target organisms. At first, HPLC (High Performance Liquid Chromatography) was used to verify which phenolic compounds would be found in the plant extracts. These were tested on bronze bug adults, in confinement test (to verify the insecticidal action of the extracts) and free-choice test (to verify the repellency). The extracts that showed better results were selected for further tests with non-target organisms. Regarding C. noackae, pre-parasitism and post-parasitism, confinement and free-choice tests were performed to verify if the extracts would affect the host-choosing by the female or the development of the immature stages of the parasitoid. To verify if the extracts would be toxic to G. domesticus, the plant extracts were added to young birds feed for five days. Parameters such as weight gain, food intake, quantification of serum enzymes and histopathological analysis were carried out. HPLC analysis detected gallic, ferulic, vanillic, caffeic and cumaric acid in the extracts samples. All plant extracts tested reduced T. peregrinus survival, but E. grandiflorus, Matricaria chamomilla Maytenus ilicifolia had also a repellent effect, and were tested on the non-target organisms. None of these extracts affected neither the host choice by C. noackae nor adult emergency, when compared to the control group. In addition, the extracts did not cause alterations in any of the studied parameters. Thus, we verified that E. grandiflorus, Matricaria chamomilla and Maytenus ilicifolia have potential to be used to control T. peregrinus and are safe to C. noackae and G. domesticus.