Stochastic simulation of the morphology of fluvial sand channels reservoirs

Dissertação para obtenção do Grau de Mestre em Engenharia Geológica (Georrecursos)

Bioactive beads for local sensing of proteases in 3D engineered tissues

Dissertação para obtenção do Grau de Doutor em Bioengenharia (MIT)

Embolisation of Prostatic Arteries as Treatment of Moderate to Severe Lower Urinary Symptoms (LUTS) Secondary to Benign Hyperplasia: Results of Short- and Mid-Term Follow-Up

OBJECTIVES: To evaluate the short- and medium-term results of prostatic arterial embolisation (PAE) for benign prostatic hyperplasia (BPH). METHODS: This was a prospective non-randomised study including 255 patients diagnosed with BPH and moderate to severe lower urinary tract symptoms after failure of medical treatment for at least 6 months. The patients underwent PAE between March 2009 and April 2012. Technical success is when selective prostatic arterial embolisation is completed in at least one pelvic side. Clinical success was defined as improving symptoms and quality of life. Evaluation was performed before PAE and at 1, 3, 6 and every 6 months thereafter with the International Prostate Symptom Score (IPSS), quality of life (QoL), International Index of Erectile Function (IIEF), uroflowmetry, prostatic specific antigen (PSA) and volume. Non-spherical polyvinyl alcohol particles were used. RESULTS: PAE was technically successful in 250 patients (97.9 %). Mean follow-up, in 238 patients, was 10 months (range 1-36). Cumulative rates of clinical success were 81.9 %, 80.7 %, 77.9 %, 75.2 %, 72.0 %, 72.0 %, 72.0 % and 72.0 % at 1, 3, 6, 12, 18, 24, 30 and 36 months, respectively. There was one major complication. CONCLUSIONS: PAE is a procedure with good results for BPH patients with moderate to severe LUTS after failure of medical therapy. KEY POINTS: • Prostatic artery embolisation offers minimally invasive therapy for benign prostatic hyperplasia. • Prostatic artery embolisation is a challenging procedure because of vascular anatomical variations. • PAE is a promising new technique that has shown good results.

Modeling assembly program with constraints. A contribution to WCET problem

Dissertação para obtenção do Grau de Mestre em Lógica Computacional

Sinergias BIM-Lean na redução dos tempos de interrupção de exploração em obras de manutenção de infraestruturas de elevada utilização – um caso de estudo

Dissertação para obtenção do Grau Mestre em Engenharia Civil – Perfil de Construção

Inversão estocástica de sísmica 3D post-stack e dados de poço para a caracterização de reservatórios e modelação de propriedades

Dissertação para obtenção do Grau de Mestre em Engenharia Geológica (Georrecursos)

Modeling in-Hospital Patient Survival During the First 28 Days After Intensive Care Unit Admission: a Prognostic Model for Clinical Trials in General Critically Ill Patients

OBJECTIVE: The objective of the study was to develop a model for estimating patient 28-day in-hospital mortality using 2 different statistical approaches. DESIGN: The study was designed to develop an outcome prediction model for 28-day in-hospital mortality using (a) logistic regression with random effects and (b) a multilevel Cox proportional hazards model. SETTING: The study involved 305 intensive care units (ICUs) from the basic Simplified Acute Physiology Score (SAPS) 3 cohort. PATIENTS AND PARTICIPANTS: Patients (n = 17138) were from the SAPS 3 database with follow-up data pertaining to the first 28 days in hospital after ICU admission. INTERVENTIONS: None. MEASUREMENTS AND RESULTS: The database was divided randomly into 5 roughly equal-sized parts (at the ICU level). It was thus possible to run the model-building procedure 5 times, each time taking four fifths of the sample as a development set and the remaining fifth as the validation set. At 28 days after ICU admission, 19.98% of the patients were still in the hospital. Because of the different sampling space and outcome variables, both models presented a better fit in this sample than did the SAPS 3 admission score calibrated to vital status at hospital discharge, both on the general population and in major subgroups. CONCLUSIONS: Both statistical methods can be used to model the 28-day in-hospital mortality better than the SAPS 3 admission model. However, because the logistic regression approach is specifically designed to forecast 28-day mortality, and given the high uncertainty associated with the assumption of the proportionality of risks in the Cox model, the logistic regression approach proved to be superior.

Taludes rochosos. Metodologias de inspecção e de avalialição de segurança. Caso de estudo das vertentes rochosas de S. Simão

A instabilização de taludes rochosos, com consequências mais ou menos gravosas, repete-se com frequência no território nacional. Os enquadramentos destes incidentes são diversos, sendo mais comum e mais visível a sua ocorrência em taludes adjacentes a vias de comunicação. No entanto, o fenómeno repete-se também em vertentes naturais, geralmente em alturas de pluviosidade mais prolongada e intensa. No presente trabalho reveem-se conceitos associados a maciços rochosos, nomeadamente as principais classificações geotécnicas e as diferentes tipologias de instabilidade em taludes rochosos. Desenvolve-se um caso de estudo de uma vertente localizada em S. Simão, concelho de Amarante. Percorrem-se as sucessivas fases de estudo, incluindo a realização da fotografia aérea com recurso a um veículo não tripulado, a geração de um modelo 3D de elevada precisão da vertente e a caracterização e a classificação dos diferentes afloramentos rochosos. Desenvolve-se uma metodologia de inspeção com a criação de dois conjuntos de fichas e propõe-se o agravamento da classificação das anomalias perante a simultaneidade de ocorrência de anomalias de idêntica gravidade e a hierarquização dos blocos potencialmente instáveis, de acordo com os respetivos níveis de gravidade (NGB). Recorre-se ao programa de modelação da queda de blocos, “Rocfall (4.0”, da “Rocscience”, a partir de trajetórias definidas no modelo 3D gerado e propõem-se soluções de reforço e de proteção da vertente.

Urban sprawl analysis and modeling in Asmara, Eritreia: Application of Geospatial Tools

Dissertation submitted in partial fulfillment of the requirements for the Degree of Master of Science in Geospatial Technologies.

Urban land cover change detection analysis and modeling spatio-temporal Growth dynamics using Remote Sensing and GIS Techniques: A case study of Dhaka, Bangladesh

Dissertation submitted in partial fulfillment of the requirements for the Degree of Master of Science in Geospatial Technologies.

Spatio-Temporal data modeling in response to deforestation monitoring (a case study of small region in Riau Province, Indonesia)

Dissertation submitted in partial fulfillment of the requirements for the Degree of Master of Science in Geospatial Technologies.

Design and implementation of 3D buildings integration for a Webgl-Based Virtual Globe: a case study of Valencian Cadastre and Fide Building Mode

Dissertation submitted in partial fulfillment of the requirements for the Degree of Master of Science in Geospatial Technologies.

Hydrologic modeling and uncertainty analysis of an ungauged watershed using mapwindow-swat

Dissertation submitted in partial fulfillment of the requirements for the Degree of Master of Science in Geospatial Technologies

Stochastic modeling of the thermal and catalytic degradation of polyethylene using simultaneous DSC/TG analysis

Dissertação para obtenção do Grau de Mestre em Engenharia Química e Bioquímica

Is It Possible to Simplify Risk Stratification Scores for Patients with ST-Segment Elevation Myocardial Infarction Undergoing Primary Angioplasty?

INTRODUCTION: There are several risk scores for stratification of patients with ST-segment elevation myocardial infarction (STEMI), the most widely used of which are the TIMI and GRACE scores. However, these are complex and require several variables. The aim of this study was to obtain a reduced model with fewer variables and similar predictive and discriminative ability. METHODS: We studied 607 patients (age 62 years, SD=13; 76% male) who were admitted with STEMI and underwent successful primary angioplasty. Our endpoints were all-cause in-hospital and 30-day mortality. Considering all variables from the TIMI and GRACE risk scores, multivariate logistic regression models were fitted to the data to identify the variables that best predicted death. RESULTS: Compared to the TIMI score, the GRACE score had better predictive and discriminative performance for in-hospital mortality, with similar results for 30-day mortality. After data modeling, the variables with highest predictive ability were age, serum creatinine, heart failure and the occurrence of cardiac arrest. The new predictive model was compared with the GRACE risk score, after internal validation using 10-fold cross validation. A similar discriminative performance was obtained and some improvement was achieved in estimates of probabilities of death (increased for patients who died and decreased for those who did not). CONCLUSION: It is possible to simplify risk stratification scores for STEMI and primary angioplasty using only four variables (age, serum creatinine, heart failure and cardiac arrest). This simplified model maintained a good predictive and discriminative performance for short-term mortality.