A review of experimental trawling from small and medium sized mechanized vessels off Kanikada

The most suitable otter trawl for small boats was found to be a 10.9 to 15m 2-seam trawl with 100cm x 50cm x 35kg horizontally curved otter boards together with long single sweep line. For operation from medium sized trawls, 18.26m 2-seam 18.3m 4-seam and 29.26m long wing trawl were found suitable. An 18.3m 4-seam trawl was netting a considerable quantity of off-bottom fishes. Shrimps predominated in the catches of the 29.26m trawl. Productive grounds for Cynagris species, Psenus species and Decapterus species within 50 to 100m depth ranges off Kakinada were available for profitable exploitation.

On the results of bottom-drift-long-lines operated off Veraval with particular reference to selective action of baits and hooks used

Hither to comprehensive data on the various types of baits used for capture of predatory fish and selective action of different hooks for bottom-drift-long lines is conspicuous by its absence. In the present studies attempts were made to evaluate the effectiveness of three types of baits and four sizes of hooks. Significant results obtained during the course of these investigations are presented in this communication.

On the importance of ship-bottom fouling by marine organisms: a techno-economic survey

A high attention has been paid for constant research on the preservation of materials in the marine environment. This includes all phases of design, development, applied engineering and economics which may influence the construction and operation of ships and underwater installations.

On the optimum buoyancy-weight relation for a bottom trawl

Comparative fishing operations were carried out with 0.55; 0.75 and 1.00 buoyancy-weight relations of bottom trawl in order to find out the optimum relation. Two nets, 18.26 m. (60') two seam nylon and 16.16 m. (23') two seam cotton trawls, were used for the experiment. The results showed that the total catch per trawling hour with 0.75 B-W relation was 16.5% and 32.08% more than that with 0.55 and 1.00 B-W relation for nylon net used. A similar trend was noticed with cotton trawl also as the catch rate with 0.75 B-W relation was 13.89% and 25.78% more than that with 0.55 and 1.00 B-W relations. However, the analysis of catch composition indicated that the off bottom fishes like lactarius, upenoides sp., synagris sp. etc., were of more percentage with 1.00 B-W relation, near bottom fish like saurida, sciaenids etc., were more with 0.75 B-W relation, while the bottom fishes like soles, prawns, skates and rays etc., were more with 0.55 B-W relation.

On the resources of demersal fishes for bottom trawling in inshore waters off Kakinada by small mechanised boats

An attempt is made to assess the available resources of demersal fishes for bottom trawling off Kakinada, in inshore waters. From the experimental fishing operation during 1964-66, the average catch per hour was 52.79 kg for 9.13 m (30') OAL mechanised boat. The catch composition was dominated by prawns and sciaenids forming 45% of the total catch. The average catch per trawling hour was more during the quarter April - June. An assessment on productive depth range has indicated that catch rate is increasing with increase in the depth of fishing.

Evolution of suitable type of bottom trawls for the medium size steel trawlers of Orissa Fisheries Department

This paper deals with the results of fishing operations conducted with conventional trawls of size 22.3 - 25.6 m and gear of 32 m long wing and bulged belly designed and developed at the Central Institute of Fishery Technology, from four medium size trawlers of Orissa Fisheries Department during 1970-71 and 1971-72 fishing seasons. By employing suitable and standard size gear there was proper utilisation of the engine power with resultant increase in the total landings of shrimps and bottom and off bottom fishes.

Stick held drag net for shore line fishes of reservoirs

Observations on the use of stick held drag nets for the removal of shore line fish, which adversely affect the growth of commercially important species in reservoirs, are presented.

Towards optimisation of bridle lengths in bottom trawls

Apart from increasing the swept area of the trawls, the importance of bridles as a herding device based on fish behaviour is discussed. The results of 10, 20 and 30m bridles when rigged with a 15m bulged belly trawl in combination with 114x57cm flat rectangular otter boards are presented. The net with 20m bridle landed better catches.

Studies on morphometry and hydrology of Gandhisagar Reservoir with special reference to its fisheries

Gandhisagar, the second largest reservoir of India is located in Mandsaur district of Madhya Pradesh at latitude 24°44'N and longitude 75°33'E at an altitude of 403.56m MSL in orientation from NE to SE. It has an extensive water spread area of 66000 ha at full reservoir level with a maximum and mean depth of 49.52 and 11.73 m respectively. The maximum length and width of the reservoir are 112 and 16km having a total shore line of 442km. Details of catchment area, bathymetry, standard hydrological data giving water level relation of the basin to water spread area, volume and fish production and the bottom topographical details of 11 experimental fishing stations and 6 fish landing centres are discussed.

Modified water spray chumming system for pole and line fishing of tuna

A water spray chumming system consisting of a 65 x 50 mm centrifugal pump driven by the propulsion engine through a PTO clutch and 'V' pulley power transmission system has been developed for the pole and line fishing of tuna. Water is sprayed through pipe loop system fitted on the edge of the fishing platform of the boat through small holes. The distance of the spray length can be adjusted by controlling the flow of the pump discharge water through a wheel valve.

Shark long line gear of India

Sharks are mainly harvested with long lines which is less expensive compared to other methods of fishing. Though this is a common gear operated along the coast, the gear in every region has its own peculiarities in construction and rigging. This communication furnishes detailed description of the gear operated in different centres. Suggestions are also offered to improve the gear and methods for enhancing production.