Modellazione Tridimensionale del Processo di Combustione di un Razzo a Propellente Solido

La regolazione dei sistemi di propulsione a razzo a propellente solido (Solid Rocket Motors) ha da sempre rappresentato una delle principali problematiche legate a questa tipologia di motori. L’assenza di un qualsiasi genere di controllo diretto del processo di combustione del grano solido, fa si che la previsione della balistica interna rappresenti da sempre il principale strumento utilizzato sia per definire in fase di progetto la configurazione ottimale del motore, sia per analizzare le eventuali anomalie riscontrate in ambito sperimentale. Variazioni locali nella struttura del propellente, difettosità interne o eterogeneità nelle condizioni di camera posso dare origine ad alterazioni del rateo locale di combustione del propellente e conseguentemente a profili di pressione e di spinta sperimentali differenti da quelli previsti per via teorica. Molti dei codici attualmente in uso offrono un approccio piuttosto semplificato al problema, facendo per lo più ricorso a fattori correttivi (fattori HUMP) semi-empirici, senza tuttavia andare a ricostruire in maniera più realistica le eterogeneità di prestazione del propellente. Questo lavoro di tesi vuole dunque proporre un nuovo approccio alla previsione numerica delle prestazioni dei sistemi a propellente solido, attraverso la realizzazione di un nuovo codice di simulazione, denominato ROBOOST (ROcket BOOst Simulation Tool). Richiamando concetti e techiche proprie della Computer Grafica, questo nuovo codice è in grado di ricostruire in processo di regressione superficiale del grano in maniera puntuale, attraverso l’utilizzo di una mesh triangolare mobile. Variazioni locali del rateo di combustione posso quindi essere facilmente riprodotte ed il calcolo della balistica interna avviene mediante l’accoppiamento di un modello 0D non-stazionario e di uno 1D quasi-stazionario. L’attività è stata svolta in collaborazione con l’azienda Avio Space Division e il nuovo codice è stato implementato con successo sul motore Zefiro 9.

Vantaggi e limiti dell'integrazione tra sistemi di traduzione assistita e sistemi di traduzione automatica

Computer-assisted translation (or computer-aided translation or CAT) is a form of language translation in which a human translator uses computer software in order to facilitate the translation process. Machine translation (MT) is the automated process by which a computerized system produces a translated text or speech from one natural language to another. Both of them are leading and promising technologies in the translation industry; it therefore seems important that translation students and professional translators become familiar with this relatively new types of technology. Whether used together, not only might these two different types of systems reduce translation time, but also lead to a further improvement in the field of translation technologies. The dissertation consists of four chapters. The first one surveys the chronological development of MT and CAT tools, the emergence of pre-editing, post-editing and controlled language and the very last frontiers in this sector. The second one provide a general overview on the four main CAT tools that are used nowadays and tested hereto. The third chapter is dedicated to the experimentations that have been conducted in order to analyze and evaluate the performance of the four integrated systems that are the core subject of this dissertation. Finally, the fourth chapter deals with the issue of terminological equivalence in interlinguistic translation. The purpose of this dissertation is not to provide an objective and definitive solution to the complex issues that arise at any time in the field of translation technologies, this aim being well away from being achieved, but to supply information about the limits and potentiality that are typical of those instruments which are now essential to any professional translator.

Funktionsaufklärung von Atmungsproteinen in Insekten

Globine sind kleine globuläre Proteine mit nahezu ubiquitärem Vorkommen in allen Tiergruppen. Sie weisen eine typische Sandwichstruktur auf, die in der Regel aus acht α-Helices mit einer zentralen prosthetischen Häm-Gruppe besteht und die Proteine zur Bindung gasförmiger Liganden befähigt. Die Funktionen der Globine reichen von O2-Transport und – Speicherung, über eine Beteiligung bei der Entgiftung reaktiver Sauerstoff- und Stickstoffspezies bis hin zu sensorischen physiologischen Aufgaben. Innerhalb der Klasse der Insekten schien das Vorhandensein von Globinen zunächst auf Insekten mit offensichtlich hypoxischen Habitaten beschränkt zu sein. Die Entdeckung des Globins glob1 in Drosophila melanogaster deutete jedoch eine sehr viel weitere Verbreitung der Globine in Insekten an, die sich durch die Identifizierung von Globingenen in einer Vielzahl von normoxisch lebenden Insekten, wie z.B. Apis mellifera oder Aedes aegypti bestätigte. D. melanogaster besitzt drei Globine, glob1, glob2 und glob3. Glob1 ist eng mit anderen intrazellulären Insektenglobinen verwandt, was zu der Annahme führte, dass es sich bei glob1 um das ursprüngliche und bei glob2 und glob3 um abgeleitete D. melanogaster Globine handelt. Glob1 wird in allen Entwicklungsstadien exprimiert, wobei die Hauptexpressionsorte der Fettkörper und das Tracheensystem sind. Die Transkription des glob1 startet von zwei alternativen Promotoren (Promotor I und II), wodurch in Kombination mit alternativem Splicing vier Transkriptvarianten (Isoform A-D) entstehen, deren Translation jedoch in einer Proteinvariante (glob1) resultiert. Hypoxische Bedingungen führen zu einer vermutlich HIF (=‚hypoxia-inducible factor‘) -vermittelten Abnahme der glob1 Genexpression, wohingegen Hyperoxie eine leichte Zunahme der glob1 mRNA Menge bewirkt. Der mithilfe des UAS/Gal4- Systems erzeugte, RNAi-vermittelte glob1 Knockdown führt zu einer schlechteren Überlebensrate adulter Fliegen unter hypoxischen Bedingungen, einer verkürzten Erholungszeit nach hypoxischem Stupor in Weibchen sowie zu einer erhöhten Resistenz gegenüber dem ROS (=‘reactive oxygen species‘) -generierenden Herbizid Paraquat in Larven und adulten Weibchen. Diese Beobachtungen sprechen für eine Funktion des Drosophila glob1 innerhalb der O2-Versorgung. Unter hyperoxischen Bedingungen hingegen wurde kein Unterschied zwischen Fliegen mit wildtypischer und manipulierter glob1-Expression festgestellt, wodurch eine Beteiligung des glob1 bei der Entgiftung reaktiver Sauerstoffspezies als mögliche Funktion vorerst ausscheidet. Bei glob2 und glob3 handelt es sich um duplizierte Gene. Auf phylogenetischen Rekonstruktionen basierend konnte die Entstehung der Globin-Duplikate auf ein Duplikationsereignis vor der Radiation des Subgenus Sophophora vor mindestens 40 Millionen Jahren zurückgeführt werden. Die durchgeführten Analysen zur molekularen Sequenzevolution der Globin-Duplikate deuten darauf hin, dass glob2 und glob3 nach der Duplikation eine Kombination aus Sub- und Neo-Funktionalisierungsprozessen durchlaufen haben. Glob2 und glob3 zeigen eine deckungsgleiche mRNA Expression, die auf die männliche Keimbahn beschränkt ist. Aufgrund des hohen Konservierungsgrads der für die Häm- und O2-Bindung essentiellen Aminosäuren kann von der Funktionalität beider Proteine ausgegangen werden. Die streng auf die männliche Keimbahn begrenzte Expression von glob2 und glob3 deutet auf eine Rolle der Globin-Duplikate innerhalb der Spermatogenese hin, die möglicherweise in einem Schutz der Spermatogenese vor oxidativem Stress besteht. Auch eine Beteiligung beim korrekten Ablauf der Spermien-Individualisierung, beispielsweise durch Regulation von Apoptoseprozessen wäre denkbar.

Problem-specific design of metaheuristics for constrained spanning tree problems

When designing metaheuristic optimization methods, there is a trade-off between application range and effectiveness. For large real-world instances of combinatorial optimization problems out-of-the-box metaheuristics often fail, and optimization methods need to be adapted to the problem at hand. Knowledge about the structure of high-quality solutions can be exploited by introducing a so called bias into one of the components of the metaheuristic used. These problem-specific adaptations allow to increase search performance. This thesis analyzes the characteristics of high-quality solutions for three constrained spanning tree problems: the optimal communication spanning tree problem, the quadratic minimum spanning tree problem and the bounded diameter minimum spanning tree problem. Several relevant tree properties, that should be explored when analyzing a constrained spanning tree problem, are identified. Based on the gained insights on the structure of high-quality solutions, efficient and robust solution approaches are designed for each of the three problems. Experimental studies analyze the performance of the developed approaches compared to the current state-of-the-art.

Dynamic wetting of complex liquids

A simple dependency between contact angle θ and velocity or surface tension has been predicted for the wetting and dewetting behavior of simple liquids. According to the hydrodynamic theory, this dependency was described by Cox and Voinov as θ ∼ Ca^(1/3) (Ca: Capillary number). For more complex liquids like surfactant solutions, this prediction is not directly given.rnHere I present a rotating drum setup for studying wetting/dewetting processes of surfactant solutions on the basis of velocity-dependent contact angle measurements. With this new setup I showed that surfactant solutions do not follow the predicted Cox-Voinov relation, but showed a stronger contact angle dependency on surface tension. All surfactants independent of their charge showed this difference from the prediction so that electrostatic interactions as a reason could be excluded. Instead, I propose the formation of a surface tension gradient close to the three-phase contact line as the main reason for the strong contact angle decrease with increasing surfactant concentration. Surface tension gradients are not only formed locally close to the three-phase contact line, but also globally along the air-liquid interface due to the continuous creation/destruction of the interface by the drum moving out of/into the liquid. By systematically hindering the equilibration routes of the global gradient along the interface and/or through the bulk, I was able to show that the setup geometry is also important for the wetting/dewetting of surfactant solutions. Further, surface properties like roughness or chemical homogeneity of the wetted/dewetted substrate influence the wetting/dewetting behavior of the liquid, i. e. the three-phase contact line is differently pinned on rough/smooth or homogeneous/inhomogeneous surfaces. Altogether I showed that the wetting/dewetting of surfactant solutions did not depend on the surfactant type (anionic, cationic, or non-ionic) but on the surfactant concentration and strength, the setup geometry, and the surface properties.rnSurfactants do not only influence the wetting/dewetting behavior of liquids, but also the impact behavior of drops on free-standing films or solutions. In a further part of this work, I dealt with the stability of the air cushion between drop and film/solution. To allow coalescence between drop and substrate, the air cushion has to vanish. In the presence of surfactants, the vanishing of the air is slowed down due to a change in the boundary condition from slip to no-slip, i. e. coalescence is suppressed or slowed down in the presence of surfactant.

Der Einfluss assistierter Reproduktionstechniken auf die epigenetische Reprogrammierung in der fruehen Embryogenese und Gametogenese im Mausmodell

Seit der Geburt von Louise J. Brown (1978) als erstem künstlich erzeugtem Kind hat sich die Nachfrage nach assistierten Reproduktionstechniken (ART) stark erhöht. Der Anteil der nach In-vitro-Fertilisation (IVF) oder Intrazytoplasmatischer Spermieninjektion (ICSI) geborenen Kinder macht mittlerweile abhängig vom betrachteten Industrieland zwischen 1-4% an der Gesamtgeburtenzahl aus. In zahlreichen Studien korreliert eine erhöhte Prävalenz für seltene Imprinting-Erkrankungen, wie z.B. Beckwith-Wiedemann oder Angelman-Syndrom, mit der Geburt nach assistierten Reproduktionstechniken. Es ist bekannt, dass die medizinischen Interventionen zur Behandlung von Sub- und Infertilität in sehr sensitive Phasen der epigenetischen Reprogrammierung des Embryos und der Keimzellen eingreifen. In der vorliegenden Arbeit wurde untersucht, ob die ovarielle Stimulation einen Einfluss auf die epigenetische Integrität von geprägten Genen in murinen Präimplantationsembryonen hat. Die in diesem Zusammenhang entwickelte digitale Bisulfitpyrosequenzierung gewährleistet die Analyse der DNA-Methylierung auf Einzelallelebene durch eine adäquate Verdünnung der Probe im Vorfeld der PCR. Die ovarielle Induktion führte zu einem erhöhten Rate an Epimutationen des paternalen H19-Allels, sowie des maternalen Snrpn-Allels. Zudem konnte festgestellt werden, dass die Expression von drei potentiellen Reprogrammierungsgenen (Apex1, Polb, Mbd3) in Embryonen aus hormonell stimulierten Muttertieren dereguliert ist. Whole-Mount Immunfluoreszenzfärbungen für APEX1 korrelierten dessen differentielle Genexpression mit dem Proteinlevel. Anzeichen früher apoptotischer Vorgänge äußerten sich in Embryonen aus hormonell induzierten Muttertieren in der hohen Rate an Embryonen, die keines der drei Transkripte exprimierten oder weniger APEX1-positive Blastomeren aufwiesen.In einer weiteren Fragestellung wurde untersucht, ob die Kryokonservierung muriner Spermatozoen den epigenetischen Status geprägter Gene in den Keimzellen beeinflusst. Die Analyse von F1-Zweizellembryonen, die durch IVF mit den jeweiligen Spermatozoen eines Männchens generiert wurden, diente der Aufklärung möglicher paternaler Transmissionen. Insgesamt konnten keine signifikanten Auswirkungen der Kryokonservierung auf den epigenetischen Status in Spermatozoen und F1-Embryonen ermittelt werden.

Disuguaglianza di Doob e traiettorie di martingale

In questa tesi abbiamo dimostrato la Disuguaglianza di Doob in L^p per sub-martingale discrete, utilizzando un metodo moderno, che consiste nel ricavarla come conseguenza dell'elementare controparte deterministica applicata a traiettorie di martingale. Abbiamo inoltre fornito un'interpretazione finanziaria in termini di super-replicazione indipendente dal modello per un'opzione esotica.

Anomalous Velocity Distributions in Active Brownian Suspensions

Large-scale simulations and analytical theory have been combined to obtain the nonequilibrium velocity distribution, f(v), of randomly accelerated particles in suspension. The simulations are based on an event-driven algorithm, generalized to include friction. They reveal strongly anomalous but largely universal distributions, which are independent of volume fraction and collision processes, which suggests a one-particle model should capture all the essential features. We have formulated this one-particle model and solved it analytically in the limit of strong damping, where we find that f (v) decays as 1/v for multiple decades, eventually crossing over to a Gaussian decay for the largest velocities. Many particle simulations and numerical solution of the one-particle model agree for all values of the damping.

The NutriChip project--translating technology into nutritional knowledge

Advances in food transformation have dramatically increased the diversity of products on the market and, consequently, exposed consumers to a complex spectrum of bioactive nutrients whose potential risks and benefits have mostly not been confidently demonstrated. Therefore, tools are needed to efficiently screen products for selected physiological properties before they enter the market. NutriChip is an interdisciplinary modular project funded by the Swiss programme Nano-Tera, which groups scientists from several areas of research with the aim of developing analytical strategies that will enable functional screening of foods. The project focuses on postprandial inflammatory stress, which potentially contributes to the development of chronic inflammatory diseases. The first module of the NutriChip project is composed of three in vitro biochemical steps that mimic the digestion process, intestinal absorption, and subsequent modulation of immune cells by the bioavailable nutrients. The second module is a miniaturised form of the first module (gut-on-a-chip) that integrates a microfluidic-based cell co-culture system and super-resolution imaging technologies to provide a physiologically relevant fluid flow environment and allows sensitive real-time analysis of the products screened in vitro. The third module aims at validating the in vitro screening model by assessing the nutritional properties of selected food products in humans. Because of the immunomodulatory properties of milk as well as its amenability to technological transformation, dairy products have been selected as model foods. The NutriChip project reflects the opening of food and nutrition sciences to state-of-the-art technologies, a key step in the translation of transdisciplinary knowledge into nutritional advice.

Strategies to advance translational research into brain barriers

There is a paucity of therapies for most neurological disorders--from rare lysosomal storage diseases to major public health concerns such as stroke and Alzheimer's disease. Advances in the targeting of drugs to the CNS are essential for the future success of neurotherapeutics; however, the delivery of many potentially therapeutic and diagnostic compounds to specific areas of the brain is restricted by the blood-brain barrier, the blood-CSF barrier, or other specialised CNS barriers. These brain barriers are now recognised as a major obstacle to the treatment of most brain disorders. The challenge to deliver therapies to the CNS is formidable, and the solution will require concerted international efforts among academia, government, and industry. At a recent meeting of expert panels, essential and high-priority recommendations to propel brain barrier research forward in six topical areas were developed and these recommendations are presented here.

Prosthetically driven, computer-guided implant planning for the edentulous maxilla: a model study

OBJECTIVES: To analyze computer-assisted diagnostics and virtual implant planning and to evaluate the indication for template-guided flapless surgery and immediate loading in the rehabilitation of the edentulous maxilla. MATERIALS AND METHODS: Forty patients with an edentulous maxilla were selected for this study. The three-dimensional analysis and virtual implant planning was performed with the NobelGuide software program (Nobel Biocare, Göteborg, Sweden). Prior to the computer tomography aesthetics and functional aspects were checked clinically. Either a well-fitting denture or an optimized prosthetic setup was used and then converted to a radiographic template. This allowed for a computer-guided analysis of the jaw together with the prosthesis. Accordingly, the best implant position was determined in relation to the bone structure and prospective tooth position. For all jaws, the hypothetical indication for (1) four implants with a bar overdenture and (2) six implants with a simple fixed prosthesis were planned. The planning of the optimized implant position was then analyzed as follows: the number of implants was calculated that could be placed in sufficient quantity of bone. Additional surgical procedures (guided bone regeneration, sinus floor elevation) that would be necessary due the reduced bone quality and quantity were identified. The indication of template-guided, flapless surgery or an immediate loaded protocol was evaluated. RESULTS: Model (a) - bar overdentures: for 28 patients (70%), all four implants could be placed in sufficient bone (total 112 implants). Thus, a full, flapless procedure could be suggested. For six patients (15%), sufficient bone was not available for any of their planned implants. The remaining six patients had exhibited a combination of sufficient or insufficient bone. Model (b) - simple fixed prosthesis: for 12 patients (30%), all six implants could be placed in sufficient bone (total 72 implants). Thus, a full, flapless procedure could be suggested. For seven patients (17%), sufficient bone was not available for any of their planned implants. The remaining 21 patients had exhibited a combination of sufficient or insufficient bone. DISCUSSION: In the maxilla, advanced atrophy is often observed, and implant placement becomes difficult or impossible. Thus, flapless surgery or an immediate loading protocol can be performed just in a selected number of patients. Nevertheless, the use of a computer program for prosthetically driven implant planning is highly efficient and safe. The three-dimensional view of the maxilla allows the determination of the best implant position, the optimization of the implant axis, and the definition of the best surgical and prosthetic solution for the patient. Thus, a protocol that combines a computer-guided technique with conventional surgical procedures becomes a promising option, which needs to be further evaluated and improved.

The Car Resequencing Problem with Pull-Off Tables

The car sequencing problem determines sequences of different car models launched down a mixed-model assembly line. To avoid work overloads of workforce, car sequencing restricts the maximum occurrence of labor-intensive options, e.g., a sunroof, by applying sequencing rules. We consider this problem in a resequencing context, where a given number of buffers (denoted as pull-off tables) is available for rearranging a stirred sequence. The problem is formalized and suited solution procedures are developed. A lower bound and a dominance rule are introduced which both reduce the running time of our graph approach. Finally, a real-world resequencing setting is investigated.

DiepRuR

Aufbau einer föderativen Dienstlandschaft in der Ruhr-Region auf Basis von SAML mit dem Ziel eine organisationsübergreifende Nutzung von webbasierten IT-Diensten zu ermöglichen

Sequential incoherence in a multi-party synchronous computer mediated communication for an introductory Health Informatics course.

Online courses will play a key role in the high-volume Informatics education required to train the personnel that will be necessary to fulfill the health IT needs of the country. Online courses can cause feelings of isolation in students. A common way to address these feelings is to hold synchronous online "chats" for students. Conventional chats, however, can be confusing and impose a high extrinsic cognitive load on their participants that hinders the learning process. In this paper we present a qualitative analysis that shows the causes of this high cognitive load and our solution through the use of a moderated chat system.

The HARPS search for southern extra-solar planets

The vast diversity of planetary systems detected to date is defying our capability of understanding their formation and evolution. Well-defined volume-limited surveys are the best tool at our disposal to tackle the problem, via the acquisition of robust statistics of the orbital elements. We are using the HARPS spectrograph to conduct our survey of ≈850 nearby solar-type stars, and in the course of the past nine years we have monitored the radial velocity of HD 103774, HD 109271, and BD-061339. In this work we present the detection of five planets orbiting these stars, with msin   (i) between 0.6 and 7 Neptune masses, four of which are in two multiple systems, comprising one super-Earth and one planet within the habitable zone of a late-type dwarf. Although for strategic reasons we chose efficiency over precision in this survey, we have the capability to detect planets down to the Neptune and super-Earth mass range as well as multiple systems, provided that enough data points are made available.