Mentoring pre-service teachers on school students’ differentiated learning

This Australian study explores the mentoring of pre-service teachers in selecting and implementing teaching strategies to meet students‟ learning needs. Two case studies involving 28 mentor teachers in a professional development program and a mentor-mentee partnership during a four week practicum provided data about mentoring teaching strategies for differentiated learning. Findings showed that contexts for learning about differentiation occurred at the pre action, in-action, and post-action stages. Central to each stage were pedagogical knowledge practices such as planning, preparation, classroom management, assessment, and problem solving (reflection-in-action to present solutions to problems) as key to in-action strategising and the mentoring processes. Mentoring pre-service teachers on how to devise teaching strategies for differentiated learning needs to be researched with a wider range of mentors and pre-service teachers, including those at different stages of development.

Photocatalytic and photovoltaic activities of TiO2 architectures with dominant {001} facets

Titanium dioxide is one of the most basic materials in our daily life, which has emerged as an excellent photocatalyst material for environmental purification and photovoltaic material working in dye-sensitized solar cell. We present two types of TiO2 architectures which are constructed by plates and sheets, respectively, and both subunits are dominant with {001} facets. The photocatalytic degradation of methyl orange in UV/supported-TiO2 systems was investigated and the mechanism was discussed. The experimental results show that photocatalytic degradation rate is favoured by larger surface area. The sheet structure shows superior photocatalytic activity than plate structure. Moreover, the materials with sheet structure were also used to investigate the photovoltaic property. The power conversion efficiency is 7.57%, indicating the materials with this unique structure are excellent in photocatalytic and photovoltaic applications.

Assessment of real-time networks and timing for process bus applications

Widespread adoption by electricity utilities of Non-Conventional Instrument Transformers, such as optical or capacitive transducers, has been limited due to the lack of a standardised interface and multi-vendor interoperability. Low power analogue interfaces are being replaced by IEC 61850 9 2 and IEC 61869 9 digital interfaces that use Ethernet networks for communication. These ‘process bus’ connections achieve significant cost savings by simplifying connections between switchyard and control rooms; however the in-service performance when these standards are employed is largely unknown. The performance of real-time Ethernet networks and time synchronisation was assessed using a scale model of a substation automation system. The test bed was constructed from commercially available timing and protection equipment supplied by a range of vendors. Test protocols have been developed to thoroughly evaluate the performance of Ethernet networks and network based time synchronisation. The suitability of IEEE Std 1588 Precision Time Protocol (PTP) as a synchronising system for sampled values was tested in the steady state and under transient conditions. Similarly, the performance of hardened Ethernet switches designed for substation use was assessed under a range of network operating conditions. This paper presents test methods that use a precision Ethernet capture card to accurately measure PTP and network performance. These methods can be used for product selection and to assess ongoing system performance as substations age. Key findings on the behaviour of multi-function process bus networks are presented. System level tests were performed using a Real Time Digital Simulator and transformer protection relay with sampled value and Generic Object Oriented Substation Events (GOOSE) capability. These include the interactions between sampled values, PTP and GOOSE messages. Our research has demonstrated that several protocols can be used on a shared process bus, even with very high network loads. This should provide confidence that this technology is suitable for transmission substations.

Situational non-flammable control valves for oxygen service

Past work has clearly demonstrated that numerous commonly used metallic materials will support burning in oxygen, especially at higher pressures. An approach to rectify this significant safety problem has been successfully developed and implemented by applying the concept of Situational Non-Flammability. This approach essentially removes or breaks one leg of the conceptual fire triangle, a tool commonly used to define the three things that are required to support burning; a fuel, an ignition source and an oxidizer. Since an oxidiser is always present in an oxygen system as are ignition sources, the concept of Situational Non-Flammability essentially removes the fuel leg of the fire triangle by only utilising materials that will not burn at the maximum pressure, for example, that the control valve is to be used in. The utilisation of this approach has lead to the development of a range of oxygen components that are practically unable to burn while in service at their design pressure thus providing an unparalleled level of first safety while not compromising on the performance or endurance required in the function of these components. This paper describes the concept of Situational Non-Flammability, how it was used to theoretically evaluate designs of components for oxygen service and the outcomes of the actual development, fabrication and finally utilisation of these components in real oxygen systems in a range of flow control devices.

Public service versus private interest : a comparative analysis of the Australian and British debates

This paper will compare and evaluate the effectiveness of commercial media lobbying and advocacy against public service media in two countries, the United Kingdom and Australia. The paper will focus empirically on the commercial media coverage of public service media issues in these countries (relating to the BBC and ABC respectively) over the period since the election of the Conservative-led Coalition in Britain in June 2010, and the election of the Gillard government in Australia in August 2010. Reference will be made to preceding periods as relevant to an understanding of the current environment. In both countries the main commercial media rival to public service media is News Corp and its associated organisations – News Ltd and Sky News in Australia, and News International and BSkyB in the UK. The paper will examine with analysis of print and online news and commentary content how News Corp outlets have reported and commented on the activities and plans of public service media as the latter have developed and extended their presence on digital TV and online platforms. It will also consider the responses of the ABC and BBC to these interventions. It will consider, thirdly, the responses of Australian and British governments to these debates, and the policy outcomes. This section of the paper will seek to evaluate the trajectory of the policy-public-private dynamic in recent years, and to draw conclusions as to the future direction of policy. Particular attention will be devoted to recent key moments in this unfolding dialogue. In Britain, debates around the efforts of News Corp to take over 100% of BSkyB, both before and after the breaking of the phone-hacking scandal in July 2011; in Australia, the debate around the National Broadband Network and the competitive tender process for ABC World, that country’s public service transnational broadcaster; and other key moments where rivalry between News Corp companies and public service media became mainstream news stories provoking wider public debate. The paper will conclude with recommendations as to how public service media organisations might engage constructively with commercial organisations in the future, including News Corp, and taking into account emerging technological and financial challenges to traditional rationales for public service provision.

Developing intercultural competence in pre-service teachers from Australia and Malaysia : insights from the “Patches” programme

Developing intercultural competence in pre-service teachers from Australia and Malaysia: Insights from a Patches program. Innovative pedagogies can offer pre-service teachers the opportunity to develop their intercultural competence and take up more globalised viewpoints. One such innovation is the Patches program which brought together Malaysian and Australian pre-service teachers who were studying at the same university in Brisbane, Australia, to actively explore issues of cultural and linguistic difference. The participants were 14 Australian fourth-year pre-service teachers who were enrolled in a program on inclusive education, and 58 Malaysian pre-service teachers who had recently arrived at the university in Brisbane to commence their second year of an international education program. In peer groupings, these domestic and international pre-service teachers engaged in a series of interactive tasks and reflective writing workshops exploring intercultural experiences, over a period of ten weeks. Each element or ‘patch’ in the program was designed to build up into a mosaic of intercultural learning. The flexible structuring of the Patches Program provided a supportive framework for participant interaction whilst allowing the groups to decide for themselves the nature and extent of their involvement in a series of community-related tasks. The process of negotiating and implementing these activities formed the basis for establishing meaningful relationships between the participants. The development of the participants’ intercultural competence is traced through their reflective narratives and focus group discussions, drawing on Byram’s concept of the five savoirs. Explaining aspects of Australian culture to their newly arrived Malaysian peers, allowed the Australian pre-service teachers to take a perspective of outsideness towards their own familiar social practices. In addition, being unusually positioned as the linguistic other amongst a group of Bahasa Melayu speakers, highlighted for the Australian pre-service teachers the importance of being inclusive. For the Malaysian pre-service teachers, participation in the Patches program helped to extend intercultural understandings, establish social networks with local students, and build a sense of community in their new learning environment. Both groups of pre-service teachers noted the power of “learning directly by interacting rather than through books”. In addition to interacting interculturally, the process of reflecting on these intercultural experiences is seen as integral to the development of intercultural competence.

Setting aside default judgment - whether judgment regularly or irregularly entered - service under Corporations Act 2001 (Cth) s109X(1) - requirements for affadavit of service

In Hill v Robertson Suspension Systems Pty Ltd [2009] QDC 165 McGill DCJ considered the procedural requirements for the service of originating process on a company, and for proving that service for the purpose of obtaining default judgment.The judge’s views adopt a strict and technical construction of the requirements for an affidavit of service under r 120(1)(b). Though clearly obiter, they may well affect the approach taken on applications to enter or set aside default judgments in the lower courts. Pending further judicial consideration of the issue, it is suggested the prudent course is to ensure that the deponent of an affidavit for service effected under s 109X(1)(a) of the Act deposes not only to the location of the registered office of the company but also, at a minimum, provides the source of that information.

Rates of attendance at a smoking cessation clinic within a cardiac rehabilitation service

Objectives: Smoking cessation has been shown to be an important intervention for preventing cardiovascular events and improving the health of patients with heart disease. However, unaided quit attempts in these patients often leads to high rates of failure and a return to smoking. Outpatient smoking cessation clinics using face-to-face counseling, ongoing behavioral support, advice on smoking pharmacotherapy and objective monitoring, have been found to be one of the most effective interventions for improving quit smoking rates. An outpatient smoking cessation clinic was trialed within a cardiac rehabilitation service in order to explore its effects on smoking rates for patients with or at risk of heart disease. Attendance rates to the clinic were also monitored. Methods: A descriptive exploratory design was used for this newly developed clinic. Patients who currently smoked tobacco and who had a history of either coronary artery disease, heart failure, atrial fibrillation or those seen under a chest pain assessment service were invited to an outpatient ‘Cardiac Patients Smokers Clinic’. Initially patients were offered up to 10 clinic visits over a 3 month period. Follow-up clinic visits were conducted at 3, 6 and 12 months. A portable carbon monoxide meter was used to objectively measure levels of smoking and validate smoking abstinence. Primary outcomes included rates of attendance. Results: Preliminary findings showed 24 per cent of participants (N = 6) completed all their clinic visits and remained smoke free as measured by their ongoing expired carbon monoxide readings. Clinic attendance rates appeared lowest for those with significant mental health issues such as schizophrenia or substance abuse. However, rates of attendance were improved by having an administration officer make reminder telephone calls prior to clinic visits. Conclusions: Early findings indicate the feasibility of providing a specialist smoking cessation clinic within a cardiac rehabilitation service. Further, that reminder telephone calls prior to appointments improved attendance rates in patients with heart disease to this type of clinic. However, future investigations are warranted.

One-stop government portals : transformation or navigation?

E-government is seen as a promising approach for governments to improve their service towards citizens and become more cost-efficient in service delivery. This is often combined with one-stop government, which is a citizen-oriented approach stressing integrated provision of services from multiple departments via a single access point, the one-stop government portal. While the portal concept is gaining prominence in practice, there is little know about its status in academic literature. This hinders academics in building an accumulated body of knowledge around the concept and makes it hard for practitioners to access relevant academic insights on the topic. The objective of this study is to identify and understand the key themes of the one-stop government portal concept in academic, e-government research. A holistic analysis is provided by addressing different viewpoints: social-political, legal, organizational, user, security, service, data & information, and technical. As overall finding we conclude that there are two different approaches: a more pragmatic approach focuses on quick wins in particular related to usability and navigation and a more ambitious, transformational approach having far reaching social-political, legal, organizational implications.

A comparative study of governmental one-stop portals for public service delivery

The continuing need for governments to radically improve the delivery of public services has led to a new, holistic government reform strategy labeled “Transformational Government” that strongly emphasizes customer-centricity. Attention has turned to online portals as a cost effective front-end to deliver services and engage customers as well as to the corresponding organizational approaches for the back-end to decouple the service interface from the departmental structures. The research presented in this paper makes three contributions: Firstly, a systematic literature review of approaches to the evaluation of online portal models in the public sector is presented. Secondly, the findings of a usability study comparing the online presences of the Queensland Government, the UK Government and the South Australian Government are reported and the relative strengths and weaknesses of the different approaches are discussed. And thirdly, the limitations of the usability study in the context of a broader “Transformational Government” approach are identified and service bundling is suggested as an innovative solution to further improve online service delivery.

Performance configurations over time: implications for growth-and profit-oriented strategies

Entrepreneurship research and practice places emphasis on company growth as a measure of entrepreneurial success. In many cases, there has been a tendency to give growth a very central role, with some researchers even seeing growth as the very essence of entrepreneurship (Cole, 1949; Sexton, 1997; Stevenson & Gumpert, 1991). A large number of empirical studies of the performance of young and/or small firms use growth as the dependent variable (see reviews by Ardishvili, Cardozo, Harmon, & Vadakath, 1998; Delmar, 1997; Wiklund, 1998). By contrast, the two most prominent views of strategic management – strategic positioning (Porter, 1980) and the resource-based view (Barney, 1991; Wernerfelt, 1984) – are both concerned with achieving competitive advantage and regard achieving economic rents and profitability relative to other competitors as the central measures of firm performance. Strategic entrepreneurship integrates these two perspectives and is simultaneously concerned with opportunity seeking and advantage seeking (Hitt, Ireland, Camp, & Sexton, 2002; Ireland, Hitt, & Sirmon, 2003). Consequently, both company growth and relative profitability are together relevant measures of firm performance in the domain of strategic entrepreneurship.

Oriented graphitic carbon films for hydrogen gas sensors

An oriented graphitic nanostructured carbon film has been employed as a conductometric hydrogen gas sensor. The carbon film was energetically deposited using a filtered cathodic vacuum arc with a -75 V bias applied to a stainless steel grid placed 1cm from the surface of the Si substrate. The substrate was heated to 400°C prior to deposition. Electron microscopy showed evidence that the film consisted largely of vertically oriented graphitic sheets and had a density of 2.06 g/cm3. 76% of the atoms were bonded in sp2 or graphitic configurations. A change in the device resistance of >; 1.5% was exhibited upon exposure to 1 % hydrogen gas (in synthetic, zero humidity air) at 100°C. The time for the sensor resistance to increase by 1.5 % under these conditions was approximately 60 s and the baseline (zero hydrogen exposure) resistance remained constant to within 0.01% during and after the hydrogen exposures.

A microscopic simulation model to estimate Bus Rapid Transit (BRT) station service capacity with mixed stopping and non-stopping bus operation

Bus Rapid Transit (BRT) station is the interface between passenger and service. The station is crucial to line operation as it is typically the only location where buses can pass each other. Congestion may occur here when buses maneuvering into and out of the platform lane interfere with bus flow, or when a queue of buses forms upstream of the platform lane blocking the passing lane. However, some systems include operation where express buses pass the critical station, resulting in a proportion of non stopping buses. It is important to understand the operation of the critical busway station under this type of operation, as it affects busway line capacity. This study uses micro simulation to treat the BRT station operation and to analyze the relationship between station Limit state bus capacity (B_ls), Total Bus Capacity (B_ttl). First, the simulation model is developed for Limit state scenario and then a mathematical model is defined, calibrated for a specified range of controlled scenarios of mean and coefficient of variation of dwell time. Thereafter, the proposed B_ls model is extended to consider non stopping buses and B_ttlmodel is defined. The proposed models provides better understanding to the BRT line capacity and is useful for transit authorities for designing better BRT operation.

Risk-taking, harm and help-seeking : reported by young people in treatment at a youth alcohol and drug counselling service

Regarded as a normative component of development, risk-taking by young people is a well-researched subject, and some risk-taking behaviours, such as substance use, are particularly well covered because of their potential to adversely affect health and wellbeing. What has remained unclear is the extent of young people's risk-taking while engaged in alcohol and other drug (AOD) treatment, their awareness of the related harms of risk-taking behaviours, and their prior help-seeking for these harms - information which may have a significant impact on the quality and relevance of the care they receive. This paper reports the findings from a brief pilot study exploring those factors in a clinical sample of young people engaged in ongoing AOD counselling.

Cultural impact on e-service use in Saudi Arabia : results from questionnaire

This paper reports the results of a mixed method approach to answer: what are the cultural values that impact on e-service use in Saudi Arabia? Cultural theories, dimensions, and models previously identified in the literature, in addition to individual interviews and focus groups, test the current identified uncovered elements of Saudi culture. This paper will firstly, introduce the importance of culture and define the aspects of Saudi culture. It will then describe the method used and present the questionnaire findings. All of the tested hypotheses were found consistent with their predicted outcomes except hypotheses 4 and 8 were partially consistent. It is evidenced that consideration of the impact of the cultural values will mainly contribute to the enhancement of social and organisational aspects of e-society research and practices, by deeply understanding them as of the influntials to e-service implementation.