Assortative fertilization in Drosophila

The concept of gametic isolation has its origins in the 1937 edition of T. Dobzhansky’s Genetics and the Origin of Species. Involving either positive assortative fertilization (as opposed to self-incompatibility) or negative assortative fertilization, it occurs after mating but prior to fertilization. Gametic isolation is generally subsumed under either prezygotic or postmating isolation and thus has not been the subject of extensive investigation. Examples of assortative fertilization in Drosophila are reviewed and compared with those of other organisms. Potential mechanisms leading to assortative fertilization are discussed, as are their evolutionary implications.

Successful external fertilization in turbulent environments.

Mathematical and experimental simulations predict that external fertilization is unsuccessful in habitats characterized by high water motion. A key assumption of such predictions is that gametes are released in hydrodynamic regimes that quickly dilute gametes. We used fucoid seaweeds to examine whether marine organisms in intertidal and subtidal habitats might achieve high levels of fertilization by restricting their release of gametes to calm intervals. Fucus vesiculosus L. (Baltic Sea) released high numbers of gametes only when maximal water velocities were below ca. 0.2 m/s immediately prior to natural periods of release, which occur in early evening in association with lunar cues. Natural fertilization success measured at two sites was always close to 100%. Laboratory experiments confirmed that (i) high water motion inhibits gamete release by F. vesiculosus and by the intertidal fucoids Fucus distichus L. (Maine) and Pelvetia fastigiata (J. Ag.) DeToni (California), and (ii) showed that photosynthesis is required for high gamete release. These data suggest that chemical changes in the boundary layer surrounding adults during photosynthesis and/or mechanosensitive channels may modulate gamete release in response to changing hydrodynamic conditions. Therefore, sensitivity to environmental factors can lead to successful external fertilization, even for species living in turbulent habitats.

A mutation that allows endosperm development without fertilization.

The mechanisms that initiate reproductive development after fertilization are not understood. Reproduction in higher plants is unique because it is initiated by two fertilization events in the haploid female gametophyte. One sperm nucleus fertilizes the egg to form the embryo. A second sperm nucleus fertilizes the central cell to form the endosperm, a unique tissue that supports the growth of the embryo. Fertilization also activates maternal tissue differentiation, the ovule integuments form the seed coat, and the ovary forms the fruit. To investigate mechanisms that initiate reproductive development, a female-gametophytic mutation termed fie (fertilization-independent endosperm) has been isolated in Arabidopsis. The fie mutation specifically affects the central cell, allowing for replication of the central cell nucleus and endosperm development without fertilization. The fie mutation does not appear to affect the egg cell, suggesting that the processes that control the initiation of embryogenesis and endosperm development are different. FIE/fie seed coat and fruit undergo fertilization-independent differentiation, which shows that the fie female gametophyte is the source of signals that activates sporophytic fruit and seed coat development. The mutant fie allele is not transmitted by the female gametophyte. Inheritance of the mutant fie allele by the female gametophyte results in embryo abortion, even when the pollen bears the wild-type FIE allele. Thus, FIE carries out a novel, essential function for female reproductive development.

Molecular cloning of a protein kinase whose phosphorylation is regulated by genetic adhesion during Chlamydomonas fertilization.

Fertilization in Chlamydomonas is initiated by adhesive interactions between gametes of opposite mating types through flagellar glycoproteins called agglutinins. Interactions between these cell adhesion molecules signal for the activation of adenylyl cyclase through an interplay of protein kinases and ultimately result in formation of a diploid zygote. One of the early events during adhesion-induced signal transduction is the rapid inactivation of a flagellar protein kinase that phosphorylates a 48-kDa protein in the flagella. We report the biochemical and molecular characterization of the 48-kDa protein. Experiments using a bacterially expressed fusion protein show that the 48-kDa protein is capable of autophosphorylation on serine and tyrosine and phosphorylation of bovine beta-casein on serine, confirming that the 48-kDa protein itself has protein kinase activity. This protein kinase exhibits limited homology to members of the eukaryotic protein kinase superfamily and may be an important element in a signaling pathway in fertilization.

Análise genética da produção in vitro de embriões em bovinos Guzerá

O objetivo dessa pesquisa foi avaliar aspectos genéticos que relacionados à produção in vitro de embriões na raça Guzerá. O primeiro estudo focou na estimação de (co) variâncias genéticas e fenotípicas em características relacionadas a produção de embriões e na detecção de possível associação com a idade ao primeiro parto (AFC). Foi detectada baixa e média herdabilidade para características relacionadas à produção de oócitos e embriões. Houve fraca associação genética entre características ligadas a reprodução artificial e a idade ao primeiro parto. O segundo estudo avaliou tendências genéticas e de endogamia em uma população Guzerá no Brasil. Doadoras e embriões produzidos in vitro foram considerados como duas subpopulações de forma a realizar comparações acerca das diferenças de variação anual genética e do coeficiente de endogamia. A tendência anual do coeficiente de endogamia (F) foi superior para a população geral, sendo detectado efeito quadrático. No entanto, a média de F para a sub- população de embriões foi maior do que na população geral e das doadoras. Foi observado ganho genético anual superior para a idade ao primeiro parto e para a produção de leite (305 dias) entre embriões produzidos in vitro do que entre doadoras ou entre a população geral. O terceiro estudo examinou os efeitos do coeficiente de endogamia da doadora, do reprodutor (usado na fertilização in vitro) e dos embriões sobre resultados de produção in vitro de embriões na raça Guzerá. Foi detectado efeito da endogamia da doadora e dos embriões sobre as características estudadas. O quarto (e último) estudo foi elaborado para comparar a adequação de modelos mistos lineares e generalizados sob método de Máxima Verossimilhança Restrita (REML) e sua adequação a variáveis discretas. Quatro modelos hierárquicos assumindo diferentes distribuições para dados de contagem encontrados no banco. Inferência foi realizada com base em diagnósticos de resíduo e comparação de razões entre componentes de variância para os modelos em cada variável. Modelos Poisson superaram tanto o modelo linear (com e sem transformação da variável) quanto binomial negativo à qualidade do ajuste e capacidade preditiva, apesar de claras diferenças observadas na distribuição das variáveis. Entre os modelos testados, a pior qualidade de ajuste foi obtida para o modelo linear mediante transformação logarítmica (Log10 X +1) da variável resposta.

A execução residual na tutela dos interesses individuais homogêneos

O presente trabalho tem como objetivo o estudo da execução residual na tutela dos interesses individuais homogêneos e as questões procedimentais que envolvem o instituto no direito processual brasileiro. Foram abordados aspectos relativos aos fundamentos do instituto no direito brasileiro, os requisitos para sua aplicação e o procedimento para a restituição da indenização devida aos indivíduos nos casos em que esta se faz necessária.

Ocular residual astigmatism and topographic disparity vector indexes in normal healthy eyes

Purpose: To define a range of normality for the vectorial parameters Ocular Residual Astigmatism (ORA) and topography disparity (TD) and to evaluate their relationship with visual, refractive, anterior and posterior corneal curvature, pachymetric and corneal volume data in normal healthy eyes. Methods: This study comprised a total of 101 consecutive normal healthy eyes of 101 patients ranging in age from 15 to 64 years old. In all cases, a complete corneal analysis was performed using a Scheimpflug photography-based topography system (Pentacam system Oculus Optikgeräte GmbH). Anterior corneal topographic data were imported from the Pentacam system to the iASSORT software (ASSORT Pty. Ltd.), which allowed the calculation of the ocular residual astigmatism (ORA) and topography disparity (TD). Linear regression analysis was used for obtaining a linear expression relating ORA and posterior corneal astigmatism (PCA). Results: Mean magnitude of ORA was 0.79 D (SD: 0.43), with a normality range from 0 to 1.63 D. 90 eyes (89.1%) showed against-the-rule ORA. A weak although statistically significant correlation was found between the magnitudes of posterior corneal astigmatism and ORA (r = 0.34, p < 0.01). Regression analysis showed the presence of a linear relationship between these two variables, although with a very limited predictability (R2: 0.08). Mean magnitude of TD was 0.89 D (SD: 0.50), with a normality range from 0 to 1.87 D. Conclusion: The magnitude of the vector parameters ORA and TD is lower than 1.9 D in the healthy human eye.

Comparison of the predictability of refractive cylinder correction by laser in situ keratomileusis in eyes with low or high ocular residual astigmatism

Purpose: To compare the manifest refractive cylinder (MRC) predictability of myopic astigmatism laser in situ keratomileusis (LASIK) between eyes with low and high ocular residual astigmatism (ORA). Setting: London Vision Clinic, London, United Kingdom. Design: Retrospective case study. Methods: The ORA was considered the vector difference between the MRC and the corneal astigmatism. The index of success (IoS), difference vector ÷ MRC, was analyzed for different groups as follows: stage 1, low ORA (ORA ÷ MRC <1), high ORA (ORA ÷ MRC ≥1); stage 2, low ORA group reduced to match the high ORA group for MRC; stage 3, grouped by ORA magnitude with low ORA (<0.50 diopters [D]), mid ORA (0.50 to 1.24 D), and high ORA (≥1.25 D); stage 4, high ORA group subdivided into low (<0.75 D) and high (≥0.75 D) corneal astigmatism. Results: For stage 1, the mean preoperative MRC and mean IoS were −1.32 D ± 0.65 (SD) (range −0.55 to −3.77 D) and 0.27, respectively, for low ORA and −0.79 ± 0.20 D (range −0.56 to −2.05 D) and 0.37, respectively, for high ORA. For stage 2, the mean IoS increased to 0.32 for low ORA. For stage 3, the mean IoS was 0.28, 0.29, and 0.31 for low ORA, mid ORA, and high ORA, respectively. For stage 4, the mean IoS was 0.20 for high ORA/low corneal astigmatism and 0.35 for high ORA/high corneal astigmatism. Conclusions: The MRC predictability was slightly worse in eyes with high ORA when grouped by the ORA ÷ MRC. Matching for the MRC and grouping by ORA magnitude resulted in similar predictability; however, eyes with high ORA and high corneal astigmatism were less predictable.

Clinical utility of ocular residual astigmatism and topographic disparity vector indexes in subclinical and clinical keratoconus

Purpose. We aimed to characterize the distribution of the vector parameters ocular residual astigmatism (ORA) and topography disparity (TD) in a sample of clinical and subclinical keratoconus eyes, and to evaluate their diagnostic value to discriminate between these conditions and healthy corneas. Methods. This study comprised a total of 43 keratoconic eyes (27 patients, 17–73 years) (keratoconus group), 11 subclinical keratoconus eyes (eight patients, 11–54 years) (subclinical keratoconus group) and 101 healthy eyes (101 patients, 15–64 years) (control group). In all cases, a complete corneal analysis was performed using a Scheimpflug photography-based topography system. Anterior corneal topographic data was imported from it to the iASSORT software (ASSORT Pty. Ltd), which allowed the calculation of ORA and TD. Results. Mean magnitude of the ORA was 3.23 ± 2.38, 1.16 ± 0.50 and 0.79 ± 0.43 D in the keratoconus, subclinical keratoconus and control groups, respectively (p < 0.001). Mean magnitude of the TD was 9.04 ± 8.08, 2.69 ± 2.42 and 0.89 ± 0.50 D in the keratoconus, subclinical keratoconus and control groups, respectively (p < 0.001). Good diagnostic performance of ORA (cutoff point: 1.21 D, sensitivity 83.7 %, specificity 87.1 %) and TD (cutoff point: 1.64 D, sensitivity 93.3 %, specificity 92.1 %) was found for the detection of keratoconus. The diagnostic ability of these parameters for the detection of subclinical keratoconus was more limited (ORA: cutoff 1.17 D, sensitivity 60.0 %, specificity 84.2 %; TD: cutoff 1.29 D, sensitivity 80.0 %, specificity 80.2 %). Conclusion. The vector parameters ORA and TD are able to discriminate with good levels of precision between keratoconus and healthy corneas. For the detection of subclinical keratoconus, only TD seems to be valid.

Experimental research on the residual mechanical properties of an ordinary concretes after fire

This paper summarizes the results of an experimental research to assess the residual mechanical properties of an ordinary concrete after fire. It was studied the influence of the cooling process, the maximum temperature that the concrete was subjected to and the loading level on the residual mechanical properties of calcareous and granite aggregate concretes. The properties studied were the residual compressive, tensile, splitting and flexural strengths and modulus of elasticity. Four levels of temperature; 20, 300, 500 and 700ºC; two loading levels (0.3f and 0.7fcd) and two cooling processes (cooling in the air and by water jet) were tested. The high temperatures attained and the sudden cooling down process on the concrete showed a negative effect on its residual mechanical properties. This effect was more notorious on the residual compression strength than in the other mechanical properties

Characterization of residual soil used for infiltration of reclaimed water

The effects of climate change and the growing demand for water for domestic, industrial, agricultural and recreational activities have been led the use of treated wastewater (reclaimed water) for such applications. The artificial recharge of aquifers with treated wastewater can be an alternative way for restoring underground water volumes that can be used for satisfying some activities, particularly in water shortage areas or where their quality is not suitable for use. After a two-year monitoring period in the Vila Fernando WWTP (Guarda, Portugal), the characteristics of the treated effluent suggest that it could be used for infiltration for aquifer recharge. A multi-criteria analysis based on GIS was developed for site location of infiltration sites. The procedure has involved the combination of six thematic maps and environmental, technical and economic criteria, over an area of 6687.1 ha. About 6.4 ha were selected for suitable sites for infiltration and one of these sites (Quinta de Gonçalo Martins, Guarda) was selected for collecting soil samples. The characterization of the soil indicates that is favorable to the infiltration of treated wastewater for artificial recharge of aquifers.

LOGITCPRPLOT: Stata module to graph component-plus-residual plot for logistic regression

logitcprplot can be used after logistic regression for graphing a component-plus-residual plot (a.k.a. partial residual plot) for a given predictor, including a lowess, local polynomial, restricted cubic spline, fractional polynomial, penalized spline, regression spline, running line, or adaptive variable span running line smooth

CPRPLOT2: Stata module to graph component-plus-residual plots for transformed regressors

cprplot2 is a variation of official Stata's cprplot and is used for graphing component-plus-residual plots (a.k.a. partial residual plots). Additional features (compared to cprplot): (1) cprplot2 can handle variables that enter the model repeatedly via different transformations (for example, polynomials). (2) cprplot2 can display component-plus-residual plots using the original units for transformed variables in the model. (3) A wrapper is provided to quickly display several component-plus-residual plots in a single image.