Structural and chemical characterization of corals grown under present day and naturally elevated pCO2 conditions in Papua New Guinea - a window into the future

Dissertação de mestrado, Biologia Marinha, Faculdade de Ciências e Tecnologia, Universidade do Algarve, 2015

Clams from Tagus estuary : microbiological, physiological and chemical responses to depuration, transpot and environmental stress

Tese de doutoramento, Biologia (Biologia Marinha e Aquacultuta), Universidade de Lisboa, Faculdade de Ciências, 2014

Test and development of microcapsules for rigid polyurethane foam

Tese de mestrado em Química Tecnológica, apresentada à Universidade de Lisboa, através da Faculdade de Ciências, 2016

An investigation of container train service provision and load factors in Great Britain

The continued growth in the volume of international trade poses considerable economic and sustainability challenges, particularly as transport routes become more congested and concern grows about the role of transport movements in accelerating climate change. Rail freight plays a major role in the inland transport of containers passing through the main British container ports, and potentially could play a more significant role in the future. However, there is little detailed understanding of the nature of this particular rail market, especially in terms its current operating efficiency. This paper examines container train service provision to/from the four main ports, based on analysis of a representative survey of more than 500 container trains between February and August 2007. The extent to which the existing capacity is utilised is presented, and scenarios by which the number of containers carried could be increased without requiring additional train service provision are modelled, to identify the theoretical potential for greater rail volumes. Finally, the paper identifies the challenges involved in achieving higher load factors, emphasising the importance both of wider supply chain considerations and government policy decision-making.

Demographic, Physical, and Behavioral Characteristics Associated with TV Parenting Practices Among Latino Parents of Preschool Children

Thesis (Master's)--University of Washington, 2015

Geographic and host factors shape the evolution of a newly recognized subgroup within the U genogroup of the fish rhabdovirus IHNV

Thesis (Master's)--University of Washington, 2015

River Sediment Sampling and Environment Quality Standards: A Case Study of the Ravensbourne River

Sediment is a major sink for heavy metals in river, and poses significant risks not only to river quality but also to aquatic and benthic organisms. At present in the UK, there are no mandatory sediment quality standards. This is partly due to insufficient toxicity data but also due to problems with identification of appropriate sediment monitoring and analytical techniques. The aim of this research was to examine the sampling different river sediment compartments in order to monitor compliance with any future UK sediment environmental quality standards (EQS). The significance of sediment physical and chemical characteristics on sampling and analysis was also determined. The Ravensbourne River, a tributary of the River Thames located in the highly urbanised South Eastern area of London was used for this study. Sediment was collected from the bed using the Van Veer grab, the bank using hand trowel, and from the water column (suspended sediment) using the time integrated suspended tube sampler between the period of July 2010 and December, 2011. The result for the total metal extraction carried out using aqua regia found that there were no significant differences in the metal concentrations retained in the different compartments by the <63μm sediment fraction but there were differences between the 63μm-2mm fractions of the bed and bank. The metal concentration in the bed, bank and suspended sediment exceeded the draft UK sediment quality guidelines. Sequential extraction was also carried out to determine metal speciation in each sediment compartment using the Maiz et al. (1997) and Tessier et al. (1979) methods. The Maiz et al. (1997) found over 80% of the metals in each sediment compartment were not bioavailable, while Tessier et al. (1979) method found most of the metals to be associated with the Fe/Mn and the residual phase. The bed sediment compartment and the <2mm (<63μm + 63μm-2mm) fraction appears to be the most suitable sediment sample for sediment monitoring from this study.

Taxonomy of fundamental concepts of localization in cyber-physical and sensor networks

Localization is a fundamental task in Cyber-Physical Systems (CPS), where data is tightly coupled with the environment and the location where it is generated. The research literature on localization has reached a critical mass, and several surveys have also emerged. This review paper contributes on the state-of-the-art with the proposal of a new and holistic taxonomy of the fundamental concepts of localization in CPS, based on a comprehensive analysis of previous research works and surveys. The main objective is to pave the way towards a deep understanding of the main localization techniques, and unify their descriptions. Furthermore, this review paper provides a complete overview on the most relevant localization and geolocation techniques. Also, we present the most important metrics for measuring the accuracy of localization approaches, which is meant to be the gap between the real location and its estimate. Finally, we present open issues and research challenges pertaining to localization. We believe that this review paper will represent an important and complete reference of localization techniques in CPS for researchers and practitioners and will provide them with an added value as compared to previous surveys.

Microstructure, mechanical properties and chemical degradation of brazed AISI 316 stainless steel/alumina systems

The main aims of the present study are simultaneously to relate the brazing parameters with: (i) the correspondent interfacial microstructure, (ii) the resultant mechanical properties and (iii) the electrochemical degradation behaviour of AISI 316 stainless steel/alumina brazed joints. Filler metals on such as Ag–26.5Cu–3Ti and Ag–34.5Cu–1.5Ti were used to produce the joints. Three different brazing temperatures (850, 900 and 950 °C), keeping a constant holding time of 20 min, were tested. The objective was to understand the influence of the brazing temperature on the final microstructure and properties of the joints. The mechanical properties of the metal/ceramic (M/C) joints were assessed from bond strength tests carried out using a shear solicitation loading scheme. The fracture surfaces were studied both morphologically and structurally using scanning electron microscopy (SEM), energy dispersive spectroscopy (EDS) and X-ray diffraction analysis (XRD). The degradation behaviour of the M/C joints was assessed by means of electrochemical techniques. It was found that using a Ag–26.5Cu–3Ti brazing alloy and a brazing temperature of 850 °C, produces the best results in terms of bond strength, 234 ± 18 MPa. The mechanical properties obtained could be explained on the basis of the different compounds identified on the fracture surfaces by XRD. On the other hand, the use of the Ag–34.5Cu–1.5Ti brazing alloy and a brazing temperature of 850 °C produces the best results in terms of corrosion rates (lower corrosion current density), 0.76 ± 0.21 μA cm−2. Nevertheless, the joints produced at 850 °C using a Ag–26.5Cu–3Ti brazing alloy present the best compromise between mechanical properties and degradation behaviour, 234 ± 18 MPa and 1.26 ± 0.58 μA cm−2, respectively. The role of Ti diffusion is fundamental in terms of the final value achieved for the M/C bond strength. On the contrary, the Ag and Cu distribution along the brazed interface seem to play the most relevant role in the metal/ceramic joints electrochemical performance.

Fire effects on soil after an experimental burnt

5th International Conference of Fire Effects on Soil Properties

Genomic and environmental factors influence Wolbachia-Drosophila symbiosis

Intracellular, vertically transmitted bacteria form complex and intimate relationships with their hosts. Wolbachia, maternally transmitted α- proteobacteria, live within the cells of numerous arthropod species. Wolbachia are famous master manipulators of insect reproduction: to favour their own spread they can induce male killing, parthenogenesis or cytoplasmic incompatibility. Wolbachia can also protect various insects from pathogens, which makes them a promising tool for the control of vector-borne diseases. Mosquitoes with Wolbachia have already been released in the wild to eliminate dengue. Yet, how Wolbachia manipulate their hosts remains largely unknown.(...)

Distribution and abundance of six species of fish larvae in peruvian waters and their relationship with physical and biological environment

Estudio de muestras recolectadas con el BIONESS a varias profundidades en trece estaciones.

MHC class I expression dependent on bacterial infection and parental factors in whitefish embryos (Salmonidae).

Ecological conditions can influence not only the expression of a phenotype, but also the heritability of a trait. As such, heritable variation for a trait needs to be studied across environments. We have investigated how pathogen challenge affects the expression of MHC genes in embryos of the lake whitefish Coregonus palaea. In order to experimentally separate paternal (i.e. genetic) from maternal and environmental effects, and determine whether and how stress affects the heritable variation for MHC expression, embryos were produced in full-factorial in vitro fertilizations, reared singly, and exposed at 208 degree days (late-eyed stage) to either one of two strains of Pseudomonas fluorescens that differ in their virulence characteristics (one increased mortality, while both delayed hatching time). Gene expression was assessed 48 h postinoculation, and virulence effects of the bacterial infection were monitored until hatching. We found no evidence of MHC class II expression at this stage of development. MHC class I expression was markedly down-regulated in reaction to both pseudomonads. While MHC expression could not be linked to embryo survival, the less the gene was expressed, the earlier the embryos hatched within each treatment group, possibly due to trade-offs between immune function and developmental rate or further factors that affect both hatching timing and MHC expression. We found significant additive genetic variance for MHC class I expression in some treatments. That is, changes in pathogen pressures could induce rapid evolution in MHC class I expression. However, we found no additive genetic variance in reaction norms in our study population.

Mass transfer and reaction kinetics in single droplet systems

As reactive extraction grown more and more popular in a variety of technological applications, optimizing its performance becomes more and more important. The process of complex formation is affected by a great number of both physical and chemical properties of all the components involved, and sometimes their interference with one another makes improving the effectiveness of such processes very difficult. In this Master’s Theses, the processes of complex formation between the aqueous phase - represented by copper sulfate water solution, and organic phase – represented by Acorga M5640 solvent extractor, were studied in order to establish the effect these components have on reactive extraction performance and to determine which step is bottlenecking the process the most.

The role of motivational systems in community service involvement : initiating and sustaining factors and quality of experience /

Community service participation can have a positive impact on development, especially for youth. Although researchers have found positive outcomes, there has been a notable decline in youth participation over the past few years (Statistics Canada, 2000). Given the positive outcomes and current decline, it has been argued that youth should be encouraged to get involved in service activities. In the present study, quantitative and qualitative data were collected to determine factors that would help youth to initiate and sustain service, along with examining the quality of their experience. Eighty-two university undergraduate students (23 men), ranging in age from 17-20 years completed a 60-minute self-report questionnaire. Initiating and sustaining factors, motivational systems (similar to approach and avoidance dimensions), activity dimensions {Structure, Supportive Social Environment), quality of experience {Positive, Stress-Challenge), and future intention to participate in community service were measured. Eight participants also completed a 20-minute telephone interview to complement and expand on the quantitative data collected. Some initiating and sustaining factors were specific to individuals higher on the avoidance dimension, while others were relevant to those higher on the approach dimension. Several factors also were important to individuals regardless of their motivational system orientation. Positive quality of experience was related positively to experiencing a supportive social environment. In addition, women rated their community service as more positive than did men. A predicted interaction between the avoidance dimension and Structure in predicting positive quality of experience was not supported; however, positive quality of experience was predicted by the interaction of the approach dimension and Structure. A tested interaction between the avoidance dimension and Supportive Social Environment in predicting positive quality of experience was not supported. Similarly, a predicted interaction between the approach dimension and Supportive Social Environment in predicting positive experience quality was not supported. However, Supportive Social Environment was positively related to positive quality of experience. No support was found for a mediational role for positive quality of experience or stress-challenge quality of experience in exploring the relation between motivational orientation and fiiture intention to engage in service activities. The results of this study suggest that participating in a service environment that is supportive and provides the opportunity for social interactions with others would promote positive quality of experience and help youth sustain involvement. Thus, to help youth have positive experiences and to remain active in service, it is important for service agencies to promote these types of environments. In addition, some initiating and sustaining factors were specific to youth higher on the avoidance dimension and some were relevant to youth higher on the approach dimension. Therefore, service agencies may need to consider using different recruitment and retention strategies, depending on the type of youth they wish to recruit.