Gestão ambiental: um estudo sobre a percepção do problema da desertificação no Estado do Rio Grande do Norte

The objective of this study was to investigate the environmental perception of: People with common-sense knowledge on the desertification process in RN. People with scientific knowledge on the desertification process in RN. Focal points in the combat at desertification of the RN and public ministery representant with actions in interinstitutional articulations promoter (and/or relative actions) at the desertification process in the RN. The research was carried in the city of Natal-RN and in two small cities of the Seridó region (RN): Caicó and Currais Novos. The research carried, is classified as exploratory and 22 people were interviewed. The research includes: The propension/intensity of the desertification in the RN and in the Seridó region; Evaluation of the knowledge of those interviewed, concerning the subject desertification ; Problems in order to combat desertification; Causes of desertification; The profile of the interviewed. The results of this present study indicate that the a desertification process is more agressive in the Seridó region than in the state of RN, being the two following: the absence of preocupation of the affected population with the process and the escarcity of governamental recurses, indicates how problems greather in the combat to the phenomen. Decreasing of produtivity in the agriculture and increasing of the migration to the urbans centers have been the main consequences of the process, that have at water scarcity, deforestation and extraction of argil (being this, regional factor), relevant variables in the influence to the surgiment of the desertification process of the RN

A gestão da qualidade nos cursos de graduação a distância da UFRN/SEDIS : a percepção dos discentes

This dissertation has as objective at analyzing the students' perception about the quality of graduate courses distance of the Federal University of Rio Grande do Norte, which was motivated by the following research problem: the perception that graduate students of the distance of the UFRN have on the quality of the undergraduate? To this end, we sought to gather evidence for a satisfactory approach that addresses the complexity of the subject studied: quality management, distance learning and quality in the Higher Education Institutions. We chose to adopt as a research method, case study on the procedure of the research, exploratory research-descriptive about the objective and quantitative research when tackling the problem. The object of the study were six graduate courses distance UFRN/SEDIS, having as target the students of the courses. The sample was calculated using the Stratified sampling on which 217 students, the courses surveyed were selected. The survey instrument consisted of 21 structured questions, of which seven questions designed to identify the profile of students, seven issues of perceptions (manifest variables) on quality management in distance learning, where students have given values (responses) for 24 statements (which address the central theme of this dissertation) composite based on a 5-point Likert s scale, and six questions about general characteristics that may interfere with students' perception about the quality. Was used as statistical method (data analysis), descriptive statistics and exploratory factor analysis. The results show the identification of four latent factors (obtained by exploratory factor analysis), namely: (1) infrastructure and management - polo presence, (2) teaching-learning processes, (3) communication tools and integration; (4) tutors. We also observed that aspects related to infrastructure and management at the pole face had the lowest score among the factors observed, requiring special attention by the education institution. On the other hand, teachers and teaching learning processes were the items with better performance in the perception of students. It is concluded that the perception of students in relation to quality in distance education courses, the median is trending positive perception, ie the perception of overall quality of the courses is not assertive and unison, but tends to positive perception. Thus, the results, it is expected that the managers of the institution to focus attention on critical points in order to minimize them (or eliminate them) and maximize the positive aspects that are perceived by the students

Gestão ambiental na saúde pública: um estudo sobre a percepção ambiental em laboratórios de análises clínicas

This objective of this work was to investigate the enviromental perception of technician of clinical laboratories, in the city of the Natal/RN, focusing the generated environmental aspects and impacts in the activities, the strategical importance of the environmental management for the activity, as well as the knowledge about environmental norms and resolutions applied to the sector. A type survey exploratory and descriptive was carried through, using a questionnaire applied in 82 clinical laboratory, getting a return tax of 53,65%, or either, 44 laboratories. The results of the descriptive analyses point with respect to environmental conscience of the interviewed, therefore the majority (75%) described the activities of clinical analyses as great imapact on the environment. Although the interviewed present certain knowledge on the advantages of practical of envivonmental protection and the risks that the activities of clinical analyses offer, some important practical of environmental protection arer not develped by the majority of the iterviewed. The carried through statistical analyses had allowed to investigate the level of environmental knowledge of the professionals of the sector, being consisted themselves that they present little knowledge on practical ISO 14001 and of environmental protection in the health public sector. It can be conclude that, a program of environmental qualification for the sector becomes necessary, in order to improve the knowledge of the professionals of the area, and that the majority of the professionals would have a good recptivity therefore recognize the benefits of the practicadl of environmental protection for the competitiveness of the clinical analyses laboratories

Qualidade em serviços de saúde: uma contribuição à definição de um modelo paramétrico e padrão de qualidade do tempo agendado para consulta ambulatorial

This work presents a study in quality of health care, with focus on consulting appointment. The main purpose is to define a statistical model and propose a quality grade of the consulting appointment time. The time considered is that from the day the patient get the appointment done to the day the consulting is realized. It is used reliability techniques and functions that has as main characteristic the analysis of data regarding the time of occurrence certain event. It is gathered a random sample of 1743 patients in the appointment system of a University Hospital - the Hospital Universitário Onofre Lopes - of the Federal University of Rio Grande do Norte, Brazil. The sample is randomly stratified in terms on clinical specialty. The data were analyzed against the parametric methods of the reliability statistics and the adjustment of the regression model resulted in the Weibull distribution being best fit to data. The quality grade proposed is based in the PAHO criteria for a consulting appointment and result that no clinic got the PAHO quality grade. The quality grade proposed could be used to define priority for improvement and as criteria to quality control

Qualidade em serviços de saúde: uma contribuição à definição de um modelo paramétrico e padrão de qualidade do tempo agendado para consulta ambulatorial

The knowledge management has received major attention from product designers because many of the activities within this process have to be creative and, therefore, they depend basically on the knowledge of the people who are involved in the process. Moreover, Product Development Process (PDP) is one of the activities in which knowledge management manifests in the most critical form once it had the intense application of the knowledge. As a consequence, this thesis analyzes the knowledge management aiming to improve the PDP and it also proposes a theoretical model of knowledge management. This model uses five steps (creation, maintenance, dissemination, utilization and discard) through the verification of the occurrence of four types of knowledge conversion (socialization, externalization, combination and internalization) that it will improve the knowledge management in this process. The intellectual capital in Small and Medium Enterprises (SMEs) managed efficiently and with the participation of all employees has become the mechanism of the creation and transference processes of knowledge, supporting and, consequently, improving the PDP. The expected results are an effective and efficient application of the proposed model for the creation of the knowledge base within an organization (organizational memory) aiming a better performance of the PDP. In this way, it was carried out an extensive analysis of the knowledge management (instrument of qualitative and subjective evaluation) within the Design department of a Brazilian company (SEBRAE/RN). This analysis aimed to know the state-of-the-art of the Design department regarding the use of knowledge management. This step was important in order to evaluate in the level of the evolution of the department related to the practical use of knowledge management before implementing the proposed theoretical model and its methodology. At the end of this work, based on the results of the diagnosis, a knowledge management system is suggested to facilitate the knowledge sharing within the organization, in order words, the Design department

Tempo de trânsito intestinal, desempenho, característica de carcaça e composição corporal de frangos de corte alimentados com rações isoenergéticas formuladas com diferentes níveis de óleo de soja

Este estudo foi conduzido para avaliar o efeito da inclusão de 0,0; 3,3; 6,6 e 9,9% de óleo de soja em rações isoenergéticas sobre o tempo de trânsito (TT), desempenho, características de carcaça e composição corporal de frangos de corte de 21 a 56 dias de idade. O TT foi determinado no 22º e 42º dias de idade, utilizando-se 192 frangos distribuídos em um esquema fatorial 2x4 (duas idades e quatro níveis de óleo de soja), com quatro repetições de seis aves cada. Para o experimento de desempenho foram utilizados 840 frangos de corte, com peso inicial médio de 870 g, distribuídos em delineamento inteiramente casualizado, com quatro tratamentos e seis repetições de 35 aves por unidade experimental. Os níveis de inclusão do óleo de soja influenciaram de forma linear decrescente o TT em ambas as idades. No período de 21 a 42 dias, o ganho de peso e as conversões alimentar e calórica aumentaram de forma quadrática e os consumos de ração e de energia metabolizável, de forma linear. No período total, a adição do óleo de soja melhorou linearmente o ganho de peso, os consumos de energia e de ração e, de forma quadrática, as conversões alimentar e calórica. No 42º e 56º dias de idade, a porcentagem de gordura abdominal, como também o rendimento de carcaça no 56º dia, foi influenciada de forma quadrática. O teor de gordura total foi influenciado de forma linear crescente e o teor de cinzas reduziu linearmente aos 56 dias de idade.

Group Sequential Communication (GSC): Especificação e Análise de Desempenho de umMecanismo de Comunicação de Tempo Real Compatível ao Padrão IEEE 802.11/11e Aplicado à Automação Industrial

This thesis proposes the specification and performance analysis of a real-time communication mechanism for IEEE 802.11/11e standard. This approach is called Group Sequential Communication (GSC). The GSC has a better performance for dealing with small data packets when compared to the HCCA mechanism by adopting a decentralized medium access control using a publish/subscribe communication scheme. The main objective of the thesis is the HCCA overhead reduction of the Polling, ACK and QoS Null frames exchanged between the Hybrid Coordinator and the polled stations. The GSC eliminates the polling scheme used by HCCA scheduling algorithm by using a Virtual Token Passing procedure among members of the real-time group to whom a high-priority and sequential access to communication medium is granted. In order to improve the reliability of the mechanism proposed into a noisy channel, it is presented an error recovery scheme called second chance algorithm. This scheme is based on block acknowledgment strategy where there is a possibility of retransmitting when missing real-time messages. Thus, the GSC mechanism maintains the real-time traffic across many IEEE 802.11/11e devices, optimized bandwidth usage and minimal delay variation for data packets in the wireless network. For validation purpose of the communication scheme, the GSC and HCCA mechanisms have been implemented in network simulation software developed in C/C++ and their performance results were compared. The experiments show the efficiency of the GSC mechanism, especially in industrial communication scenarios.

Determinação dos parâmetros do controlador preditivo generalizado com função de pesos variante no tempo através de algoritmos genéticos

The predictive control technique has gotten, on the last years, greater number of adepts in reason of the easiness of adjustment of its parameters, of the exceeding of its concepts for multi-input/multi-output (MIMO) systems, of nonlinear models of processes could be linearised around a operating point, so can clearly be used in the controller, and mainly, as being the only methodology that can take into consideration, during the project of the controller, the limitations of the control signals and output of the process. The time varying weighting generalized predictive control (TGPC), studied in this work, is one more an alternative to the several existing predictive controls, characterizing itself as an modification of the generalized predictive control (GPC), where it is used a reference model, calculated in accordance with parameters of project previously established by the designer, and the application of a new function criterion, that when minimized offers the best parameters to the controller. It is used technique of the genetic algorithms to minimize of the function criterion proposed and searches to demonstrate the robustness of the TGPC through the application of performance, stability and robustness criterions. To compare achieves results of the TGPC controller, the GCP and proportional, integral and derivative (PID) controllers are used, where whole the techniques applied to stable, unstable and of non-minimum phase plants. The simulated examples become fulfilled with the use of MATLAB tool. It is verified that, the alterations implemented in TGPC, allow the evidence of the efficiency of this algorithm

Agentes Inteligentes com Foco de Atenção Afetivo em Simulações Baseadas em Agentes

Simulations based on cognitively rich agents can become a very intensive computing task, especially when the simulated environment represents a complex system. This situation becomes worse when time constraints are present. This kind of simulations would benefit from a mechanism that improves the way agents perceive and react to changes in these types of environments. In other worlds, an approach to improve the efficiency (performance and accuracy) in the decision process of autonomous agents in a simulation would be useful. In complex environments, and full of variables, it is possible that not every information available to the agent is necessary for its decision-making process, depending indeed, on the task being performed. Then, the agent would need to filter the coming perceptions in the same as we do with our attentions focus. By using a focus of attention, only the information that really matters to the agent running context are perceived (cognitively processed), which can improve the decision making process. The architecture proposed herein presents a structure for cognitive agents divided into two parts: 1) the main part contains the reasoning / planning process, knowledge and affective state of the agent, and 2) a set of behaviors that are triggered by planning in order to achieve the agent s goals. Each of these behaviors has a runtime dynamically adjustable focus of attention, adjusted according to the variation of the agent s affective state. The focus of each behavior is divided into a qualitative focus, which is responsible for the quality of the perceived data, and a quantitative focus, which is responsible for the quantity of the perceived data. Thus, the behavior will be able to filter the information sent by the agent sensors, and build a list of perceived elements containing only the information necessary to the agent, according to the context of the behavior that is currently running. Based on the human attention focus, the agent is also dotted of a affective state. The agent s affective state is based on theories of human emotion, mood and personality. This model serves as a basis for the mechanism of continuous adjustment of the agent s attention focus, both the qualitative and the quantative focus. With this mechanism, the agent can adjust its focus of attention during the execution of the behavior, in order to become more efficient in the face of environmental changes. The proposed architecture can be used in a very flexibly way. The focus of attention can work in a fixed way (neither the qualitative focus nor the quantitaive focus one changes), as well as using different combinations for the qualitative and quantitative foci variation. The architecture was built on a platform for BDI agents, but its design allows it to be used in any other type of agents, since the implementation is made only in the perception level layer of the agent. In order to evaluate the contribution proposed in this work, an extensive series of experiments were conducted on an agent-based simulation over a fire-growing scenario. In the simulations, the agents using the architecture proposed in this work are compared with similar agents (with the same reasoning model), but able to process all the information sent by the environment. Intuitively, it is expected that the omniscient agent would be more efficient, since they can handle all the possible option before taking a decision. However, the experiments showed that attention-focus based agents can be as efficient as the omniscient ones, with the advantage of being able to solve the same problems in a significantly reduced time. Thus, the experiments indicate the efficiency of the proposed architecture

Análise e síntese de antenas e superfícies seletivas de frequência utilizando computação evolucionária e inteligência de enxames

The frequency selective surfaces, or FSS (Frequency Selective Surfaces), are structures consisting of periodic arrays of conductive elements, called patches, which are usually very thin and they are printed on dielectric layers, or by openings perforated on very thin metallic surfaces, for applications in bands of microwave and millimeter waves. These structures are often used in aircraft, missiles, satellites, radomes, antennae reflector, high gain antennas and microwave ovens, for example. The use of these structures has as main objective filter frequency bands that can be broadcast or rejection, depending on the specificity of the required application. In turn, the modern communication systems such as GSM (Global System for Mobile Communications), RFID (Radio Frequency Identification), Bluetooth, Wi-Fi and WiMAX, whose services are highly demanded by society, have required the development of antennas having, as its main features, and low cost profile, and reduced dimensions and weight. In this context, the microstrip antenna is presented as an excellent choice for communications systems today, because (in addition to meeting the requirements mentioned intrinsically) planar structures are easy to manufacture and integration with other components in microwave circuits. Consequently, the analysis and synthesis of these devices mainly, due to the high possibility of shapes, size and frequency of its elements has been carried out by full-wave models, such as the finite element method, the method of moments and finite difference time domain. However, these methods require an accurate despite great computational effort. In this context, computational intelligence (CI) has been used successfully in the design and optimization of microwave planar structures, as an auxiliary tool and very appropriate, given the complexity of the geometry of the antennas and the FSS considered. The computational intelligence is inspired by natural phenomena such as learning, perception and decision, using techniques such as artificial neural networks, fuzzy logic, fractal geometry and evolutionary computation. This work makes a study of application of computational intelligence using meta-heuristics such as genetic algorithms and swarm intelligence optimization of antennas and frequency selective surfaces. Genetic algorithms are computational search methods based on the theory of natural selection proposed by Darwin and genetics used to solve complex problems, eg, problems where the search space grows with the size of the problem. The particle swarm optimization characteristics including the use of intelligence collectively being applied to optimization problems in many areas of research. The main objective of this work is the use of computational intelligence, the analysis and synthesis of antennas and FSS. We considered the structures of a microstrip planar monopole, ring type, and a cross-dipole FSS. We developed algorithms and optimization results obtained for optimized geometries of antennas and FSS considered. To validate results were designed, constructed and measured several prototypes. The measured results showed excellent agreement with the simulated. Moreover, the results obtained in this study were compared to those simulated using a commercial software has been also observed an excellent agreement. Specifically, the efficiency of techniques used were CI evidenced by simulated and measured, aiming at optimizing the bandwidth of an antenna for wideband operation or UWB (Ultra Wideband), using a genetic algorithm and optimizing the bandwidth, by specifying the length of the air gap between two frequency selective surfaces, using an optimization algorithm particle swarm

Ajuste automático e otimização do tempo de espera (Idle time) em bombeio mecânico de petróleo

The present work presents an algorithm proposal, which aims for controlling and improving idle time to be applied in oil production wells equipped with beam pump. The algorithm was totally designed based on existing papers and data acquired from two Potiguar Basin pilot wells. Oil engineering concepts such as submergence, pump off, Basic Sediments and Water (BSW), Inflow Performance Relationship (IPR), reservo ir pressure, inflow pressure, among others, were included into the algorithm through a mathematical treatment developed from a typical well and then extended to the general cases. The optimization will increase the well production potential maximum utilization having the smallest number of pumping unit cycles directly reflecting on operational cost and electricity consumption reduction

Efeito do tempo de experiência de operadores de Harvester no rendimento operacional

A mecanização da colheita de madeira permite maior controle dos custos e pode proporcionar reduções em prazos relativamente curtos. Além disso, tem um lugar de destaque na humanização do trabalho florestal e no aumento do rendimento operacional. O presente trabalho teve por objetivo avaliar o desempenho de operadores de harvester em função do tempo de experiência na atividade. Foram avaliados oito operadores do sexo masculino, com idade entre 23 e 46 anos. O estudo consistiu na análise do volume de madeira colhida pelo harvester. O tempo de experiência afeta significativamente o rendimento operacional dos operadores de harvester. Tal rendimento aumenta expressivamente nos primeiros 18 meses de experiência, mantendo-se em ascensão nos próximos 26 meses. Após os 44 meses de experiência, o rendimento dos operadores tende a reduzir, revelando as possíveis acomodações do cotidiano. Tais resultados permitem concluir que por volta dos 50 meses de experiência na atividade de operação de harvester, se faz necessária a adoção de medidas de reciclagem, motivação, entre outras, a fim de proporcionar aos operadores melhores condições de trabalho que os possibilitem continuar exercendo a atividade de forma eficiente e rentável à empresa.

Multi-resolução com fóvea móvel para redução e abstração de dados em tempo real

We propose a new approach to reduction and abstraction of visual information for robotics vision applications. Basically, we propose to use a multi-resolution representation in combination with a moving fovea for reducing the amount of information from an image. We introduce the mathematical formalization of the moving fovea approach and mapping functions that help to use this model. Two indexes (resolution and cost) are proposed that can be useful to choose the proposed model variables. With this new theoretical approach, it is possible to apply several filters, to calculate disparity and to obtain motion analysis in real time (less than 33ms to process an image pair at a notebook AMD Turion Dual Core 2GHz). As the main result, most of time, the moving fovea allows the robot not to perform physical motion of its robotics devices to keep a possible region of interest visible in both images. We validate the proposed model with experimental results

Modelagem aplicada à análise de desempenho do provedor de serviços de uma rede de automação hospitalar ieee 802.3/pm-ah de tempo real

The incorporate of industrial automation in the medical are requires mechanisms to safety and efficient establishment of communication between biomedical devices. One solution to this problem is the MP-HA (Multicycles Protocol to Hospital Automation) that down a segmented network by beds coordinated by an element called Service Provider. The goal of this work is to model this Service Provider and to do performance analysis of the activities executed by in establishment and maintenance of hospital networks

Identificação em tempo real de modelo dinâmico de robô móvel com acionamento diferencial e zona morta

Several mobile robots show non-linear behavior, mainly due friction phenomena between the mechanical parts of the robot or between the robot and the ground. Linear models are efficient in some cases, but it is necessary take the robot non-linearity in consideration when precise displacement and positioning are desired. In this work a parametric model identification procedure for a mobile robot with differential drive that considers the dead-zone in the robot actuators is proposed. The method consists in dividing the system into Hammerstein systems and then uses the key-term separation principle to present the input-output relations which shows the parameters from both linear and non-linear blocks. The parameters are then simultaneously estimated through a recursive least squares algorithm. The results shows that is possible to identify the dead-zone thresholds together with the linear parameters