895 resultados para pacs: computer-aided instruction
Resumo:
Supported by: Contract AT (11-1)-1018 with the U.S. Atomic Energy Commission and the Advanced Research Projects Agency.
Resumo:
A sieve plate distillation column has been constructed and interfaced to a minicomputer with the necessary instrumentation for dynamic, estimation and control studies with special bearing on low-cost and noise-free instrumentation. A dynamic simulation of the column with a binary liquid system has been compiled using deterministic models that include fluid dynamics via Brambilla's equation for tray liquid holdup calculations. The simulation predictions have been tested experimentally under steady-state and transient conditions. The simulator's predictions of the tray temperatures have shown reasonably close agreement with the measured values under steady-state conditions and in the face of a step change in the feed rate. A method of extending linear filtering theory to highly nonlinear systems with very nonlinear measurement functional relationships has been proposed and tested by simulation on binary distillation. The simulation results have proved that the proposed methodology can overcome the typical instability problems associated with the Kalman filters. Three extended Kalman filters have been formulated and tested by simulation. The filters have been used to refine a much simplified model sequentially and to estimate parameters such as the unmeasured feed composition using information from the column simulation. It is first assumed that corrupted tray composition measurements are made available to the filter and then corrupted tray temperature measurements are accessed instead. The simulation results have demonstrated the powerful capability of the Kalman filters to overcome the typical hardware problems associated with the operation of on-line analyzers in relation to distillation dynamics and control by, in effect, replacirig them. A method of implementing estimator-aided feedforward (EAFF) control schemes has been proposed and tested by simulation on binary distillation. The results have shown that the EAFF scheme provides much better control and energy conservation than the conventional feedback temperature control in the face of a sustained step change in the feed rate or multiple changes in the feed rate, composition and temperature. Further extensions of this work are recommended as regards simulation, estimation and EAFF control.
Resumo:
A significant body of research investigates the acceptance of computer-based support (including devices and applications ranging from e-mail to specialized clinical systems, like PACS) among clinicians. Much of this research has focused on measuring the usability of systems using characteristics related to the clarity of interactions and ease of use. We propose that an important attribute of any clinical computer-based support tool is the intrinsic motivation of the end-user (i.e. a clinician) to use the system in practice. In this paper we present the results of a study that investigated factors motivating medical doctors (MDs) to use computer-based support. Our results demonstrate that MDs value computer-based support, find it useful and easy to use, however, uptake is hindered by perceived incompetence, and pressure and tension associated with using technology.
Resumo:
The purpose of this study was to demonstrate if the academic assistance program Supplemental Instruction (SI) facilitates the acquisition of effective study behaviors through strategies that transcend simple double-exposure to the course material. Its advocates claim it increases academic achievement using learner-centered knowledge and acquisition of effective study behaviors. SI sessions are specifically related to particular courses that students are taking. Sessions are facilitated by the SI leader who has taken the subject matter course in the past. Students review the content of the previous subject matter class using collaborative learning strategies coordinated by a SI leader. In addition, the SI leader models appropriate study behaviors in his or her interactions with the students. ^ An instructor at a large Florida community college who taught five classes of an Anatomy & Physiology I course (traditionally supported by SI) was identified. Two of the classes were randomly selected to participate in SI activities, and two classes were random chosen to participate in alternate, computer-based activities that dealt with the course content, but did not include work in developing students' study behaviors. These treatments were carried out over the course of an entire semester. Participation was mandatory. ^ Data were collected on two variables. Academic achievement in anatomy and physiology content was measured both pre- and post-treatment using an instructor developed examination. Student study behaviors were measured using pre- and post-treatment administration of the Study Behavior Inventory, a valid and reliable instrument that provides scores on three categories of study behaviors: (a) Academic self-efficacy, (b) Preparation for routine academic tasks, and (c) Preparation for long range academic tasks. Measures obtained at the end of the semester of treatment revealed no significant differences between the SI and alternative treatment groups in post-treatment achievement test score and the post-treatment scores on the three study behaviors categories when adjusted for pre-treatment scores. ^ These results suggest that the development of appropriate study behaviors requires more time than SI, as it is now implemented, can provide. In addition, results indicate that improved academic achievement may be attained through any number of means that include repeated exposure to course material. ^
Resumo:
Writing is an academic skill critical to students in today's schools as it serves as a predominant means for demonstrating knowledge during school years (Graham, 2008). However, for many students with Specific Learning Disabilities (SLD), learning to write is a challenging, complex process (Lane, Graham, Harris, & Weisenbach, 2006). Students SLD have substantial writing challenges related to the nature of their disability (Mayes & Calhoun, 2005). ^ This study investigated the effects of computer graphic organizer software on the narrative writing compositions of four, fourth- and fifth-grade, elementary-level boys with SLD. A multiple baseline design across subjects was used to explore the effects of the computer graphic organizer software on four dependent variables: total number of words, total planning time, number of common story elements, and overall organization. ^ Prior to baseline, participants were taught the fundamentals of narrative writing. Throughout baseline and intervention, participants were read a narrative writing prompt and were allowed up to 10 minutes to plan their writing, followed by 15 minutes for writing, and 5 minutes of editing. During baseline, all planning was done using paper and pencil. During intervention, planning was done on the computer using a graphic organizer developed from the software program Kidspiration 3.0 (2011). All compositions were written and editing was done using paper and pencil during baseline and intervention. ^ The results of this study indicated that to varying degrees computer graphic organizers had a positive effect on the narrative writing abilities of elementary aged students with SLD. Participants wrote more words (from 54.74 to 96.60 more), planned for longer periods of time (from 4.50 to 9.50 more minutes), and included more story elements in their compositions (from 2.00 to 5.10 more out of a possible 6). There were nominal to no improvements in overall organization across the 4 participants. ^ The results suggest that teachers of students with SLD should considering use computer graphic organizers in their narrative writing instruction, perhaps in conjunction with remedial writing strategies. Future investigations can include other types of writing genres, other stages of writing, participants with varied demographics and their use combined with remedial writing instruction. ^
Resumo:
The authors review and evaluate the use of a business simulation, specifically he Hotel Operational Training Simulation (HOTS), in the fourth year of a hospitality undergraduate program. Four dimensions were explored: learning experience, alternative method of instruction, critical and analytical thinking ability and delivery time frame, in addition to the student overall satisfaction with the learning experience.
Resumo:
Many culturally and linguistically diverse (CLD) students with specific learning disabilities (SLD) struggle with the writing process. Particularly, they have difficulties developing and expanding ideas, organizing and elaborating sentences, and revising and editing their compositions (Graham, Harris, & Larsen, 2001; Myles, 2002). Computer graphic organizers offer a possible solution to assist them in their writing. This study investigated the effects of a computer graphic organizer on the persuasive writing compositions of Hispanic middle school students with SLD. A multiple baseline design across subjects was used to examine its effects on six dependent variables: number of arguments and supporting details, number and percentage of transferred arguments and supporting details, planning time, writing fluency, syntactical maturity (measured by T-units, the shortest grammatical sentence without fragments), and overall organization. Data were collected and analyzed throughout baseline and intervention. Participants were taught persuasive writing and the writing process prior to baseline. During baseline, participants were given a prompt and asked to use paper and pencil to plan their compositions. A computer was used for typing and editing. Intervention required participants to use a computer graphic organizer for planning and then a computer for typing and editing. The planning sheets and written composition were printed and analyzed daily along with the time each participant spent on planning. The use of computer graphic organizers had a positive effect on the planning and persuasive writing compositions. Increases were noted in the number of supporting details planned, percentage of supporting details transferred, planning time, writing fluency, syntactical maturity in number of T-units, and overall organization of the composition. Minimal to negligible increases were noted in the mean number of arguments planned and written. Varying effects were noted in the percent of transferred arguments and there was a decrease in the T-unit mean length. This study extends the limited literature on the effects of computer graphic organizers as a prewriting strategy for Hispanic students with SLD. In order to fully gauge the potential of this intervention, future research should investigate the use of different features of computer graphic organizer programs, its effects with other writing genres, and different populations.
Resumo:
The purpose of this research study was to determine the effect of two different instructional groupings (cooperative and traditional whole-class) on student achievement and attitudes using a computer-based interactive videodisc biology unit. The subjects were 64 high school biology students assigned to two heterogeneous experimental groups, randomly selected from two preassigned summer school biology classes, one honors, the other regular. A two-group, posttest-only, control group experimental research design was utilized. Achievement at three cognitive levels and attitudes towards science laserdisc instruction were measured at the conclusion of the study. The cooperative group consistently outperformed the traditional group in achievement posttest scores. Factorial ANOVA on total (overall) achievement scores indicated that subjects in cooperative groups significantly outperformed those in the traditional group, and also that the instructional group, class level, and gender interacted in an ordinal fashion to make a significant difference in how female and male subjects were affected by the treatments depending on their class (aptitude) level. Regular level females and honors level males performed much better when in cooperative groups, whereas group membership did not appear to make a difference for either honors level females or regular level males. A t-test comparing honors level males revealed that cooperative groups were close to being significantly better in total achievement posttest scores than their traditional group counterparts. Factorial MANOVA comparing the instructional groups at three cognitive levels found no significant difference. Analysis on the attitudes posttest data also revealed that subjects in cooperative groups demonstrated more positive attitudes towards science laserdisc instruction; however these differences were not found to be significant. Significant interactions in attitudes of females and males from different class levels had the opposite effect as achievement: honors level females and regular level males demonstrated more positive attitudes towards science laserdisc instruction when in cooperative groups, whereas group membership did not appear to make a difference for honors level males, and regular level females demonstrated the lowest attitudes ratings of any group when involved in cooperative groups. This contrast between achievement and attitudinal results suggests cross-gender interaction in traditionally defined gender roles.
Resumo:
Minimum Student Performance Standards in Computer Literacy and Science were passed by the Florida Legislature through the Educational Reform Act of 1983. This act mandated that all Florida high school graduates receive training in computer literacy. Schools and school systems were charged with the task of determining the best methods to deliver this instruction to their students. The scope of this study is to evaluate one school's response to the state of Florida's computer literacy mandate. The study was conducted at Miami Palmetto Senior High School, located in Dade County, Florida. The administration of Miami Palmetto Senior High School chose to develop and implement a new program to comply with the state mandate - integrating computer literacy into the existing biology curriculum. The study evaluated the curriculum to determine if computer literacy could be integrated successfully and meet both the biology and computer literacy objectives. The findings in this study showed that there were no significant differences between biology scores of the students taking the integrated curriculum and those taking a traditional curriculum of biology. Student in the integrated curriculum not only met the biology objectives as well as those in the traditional curriculum, they also successfully completed the intended objectives for computer literacy. Two sets of objectives were successfully completed in the integrated classes in the same amount of time used to complete one set of objectives in the traditional biology classes. Therefore, integrated curriculum was the more efficient means of meeting the intended objectives of both biology and computer literacy.
Resumo:
L'evoluzione tecnologica e l'utilizzo crescente della computer grafica in diversi settori stanno suscitando l'interesse di sempre più persone verso il mondo della modellazione 3D. I software di modellazione, tuttavia, si presentano spesso inadeguati all'utilizzo da parte di utenti senza esperienza, soprattutto a causa dei comandi di navigazione e modellazione poco intuitivi. Dal punto di vista dell'interazione uomo-computer, questi software devono infatti affrontare un grande ostacolo: il rapporto tra dispositivi di input 2D (come il mouse) e la manipolazione di una scena 3D. Il progetto presentato in questa tesi è un addon per Blender che consente di utilizzare il dispositivo Leap Motion come ausilio alla modellazione di superfici in computer grafica. L'obiettivo di questa tesi è stato quello di progettare e realizzare un'interfaccia user-friendly tra Leap e Blender, in modo da potere utilizzare i sensori del primo per facilitare ed estendere i comandi di navigazione e modellazione del secondo. L'addon realizzato per Blender implementa il concetto di LAM (Leap Aided Modelling: modellazione assistita da Leap), consentendo quindi di estendere le feature di Blender riguardanti la selezione, lo spostamento e la modifica degli oggetti in scena, la manipolazione della vista utente e la modellazione di curve e superfici Non Uniform Rational B-Splines (NURBS). Queste estensioni sono state create per rendere più veloci e semplici le operazioni altrimenti guidate esclusivamente da mouse e tastiera.
Resumo:
We propose an ISA extension that decouples the data access and register write operations in a load instruction. We describe system and hardware support for decoupled loads. Furthermore, we show how compilers can generate better static instruction schedules by hoisting a decoupled load’s data access above may-alias stores and branches. We find that decoupled loads improve performance with geometric mean speedups of 8.4%.
Resumo:
A purpose of this research study was to demonstrate the practical linguistic study and evaluation of dissertations by using two examples of the latest technology, the microcomputer and optical scanner. That involved developing efficient methods for data entry plus creating computer algorithms appropriate for personal, linguistic studies. The goal was to develop a prototype investigation which demonstrated practical solutions for maximizing the linguistic potential of the dissertation data base. The mode of text entry was from a Dest PC Scan 1000 Optical Scanner. The function of the optical scanner was to copy the complete stack of educational dissertations from the Florida Atlantic University Library into an I.B.M. XT microcomputer. The optical scanner demonstrated its practical value by copying 15,900 pages of dissertation text directly into the microcomputer. A total of 199 dissertations or 72% of the entire stack of education dissertations (277) were successfully copied into the microcomputer's word processor where each dissertation was analyzed for a variety of syntax frequencies. The results of the study demonstrated the practical use of the optical scanner for data entry, the microcomputer for data and statistical analysis, and the availability of the college library as a natural setting for text studies. A supplemental benefit was the establishment of a computerized dissertation corpus which could be used for future research and study. The final step was to build a linguistic model of the differences in dissertation writing styles by creating 7 factors from 55 dependent variables through principal components factor analysis. The 7 factors (textual components) were then named and described on a hypothetical construct defined as a continuum from a conversational, interactional style to a formal, academic writing style. The 7 factors were then grouped through discriminant analysis to create discriminant functions for each of the 7 independent variables. The results indicated that a conversational, interactional writing style was associated with more recent dissertations (1972-1987), an increase in author's age, females, and the department of Curriculum and Instruction. A formal, academic writing style was associated with older dissertations (1972-1987), younger authors, males, and the department of Administration and Supervision. It was concluded that there were no significant differences in writing style due to subject matter (community college studies) compared to other subject matter. It was also concluded that there were no significant differences in writing style due to the location of dissertation origin (Florida Atlantic University, University of Central Florida, Florida International University).
Resumo:
Geographic Data Warehouses (GDW) are one of the main technologies used in decision-making processes and spatial analysis, and the literature proposes several conceptual and logical data models for GDW. However, little effort has been focused on studying how spatial data redundancy affects SOLAP (Spatial On-Line Analytical Processing) query performance over GDW. In this paper, we investigate this issue. Firstly, we compare redundant and non-redundant GDW schemas and conclude that redundancy is related to high performance losses. We also analyze the issue of indexing, aiming at improving SOLAP query performance on a redundant GDW. Comparisons of the SB-index approach, the star-join aided by R-tree and the star-join aided by GiST indicate that the SB-index significantly improves the elapsed time in query processing from 25% up to 99% with regard to SOLAP queries defined over the spatial predicates of intersection, enclosure and containment and applied to roll-up and drill-down operations. We also investigate the impact of the increase in data volume on the performance. The increase did not impair the performance of the SB-index, which highly improved the elapsed time in query processing. Performance tests also show that the SB-index is far more compact than the star-join, requiring only a small fraction of at most 0.20% of the volume. Moreover, we propose a specific enhancement of the SB-index to deal with spatial data redundancy. This enhancement improved performance from 80 to 91% for redundant GDW schemas.
Resumo:
This paper proposes an architecture for machining process and production monitoring to be applied in machine tools with open Computer numerical control (CNC). A brief description of the advantages of using open CNC for machining process and production monitoring is presented with an emphasis on the CNC architecture using a personal computer (PC)-based human-machine interface. The proposed architecture uses the CNC data and sensors to gather information about the machining process and production. It allows the development of different levels of monitoring systems with mininium investment, minimum need for sensor installation, and low intrusiveness to the process. Successful examples of the utilization of this architecture in a laboratory environment are briefly described. As a Conclusion, it is shown that a wide range of monitoring solutions can be implemented in production processes using the proposed architecture.