Impact of the introduction of machine gaming in Queensland on minor and major bingo

Material for this paper comes from as report commissioned by the Department of Family Services, Aboriginal and Islander Affairs. The report is the result of a multi strategy research project designed to assess the impact of gaming machines on the fundraising capacity of charitable and community organisations in Queensland. The study was conducted during the 1993 calendar year. The first Queensland gaming machine was commissioned on the 11 February, 1992 at 11.30 am in Brisbane at the Kedron Wavell Services Club. Eighteen more clubs followed that week. Six months later there were gaming machines in 335 clubs, and 250 hotels and taverns, representing a state wide total of 7,974 machines in operation. The 10,000 gaming machine was commissioned on the 18 March, 1993 and the 1,000 operational gaming machine site was opened on 18th February, 1994.

Brand loyalty in the Australian wine industry

Consumers are increasingly exposed to a wider range of wine brands as the industry is becoming vastly competitive. Using data from Australian wine consumers, the authors empirically test a model of antecedents of wine brand loyalty. The findings of this study show that wine knowledge and wine experience influence wine brand loyalty indirectly through wine brand trust and wine brand satisfaction. In addition, it is demonstrated that consumer satisfaction with a wine brand is the strongest driver of wine brand loyalty.

Management characteristics and the decision to internationalize : exploration of exporters vs. non-exporters within the Chilean wine industry

The objective of this study was to identify key factors differentiating between exporters and non-exporters in the Chilean wine industry. Based on survey data collected from 61 wineries, the findings show that the main barriers for non-exporters are the lack of financial resources, limited quantities of stock for market expansion, management’s lack of knowledge and experience, and the high cost of travelling and participating in trade shows. The results also show that managers have educational levels and international experience exceeding those of other comparable New World wineries. Finally, in developing their main international markets, Chilean wineries did not target psychically close markets as identified in previous wine industry studies

When non-significance may be significant : lessons learned from a study of the development, implementation and evaluation of a fleet risk assessment tool

This paper reports on the development and implementation of a self-report risk assessment tool that was developed in an attempt to increase the efficacy of crash prediction within Australian fleet settings. This study forms a part of a broader program of research into work related road safety and identification of driving risk. The first phase of the study involved a series of focus groups being conducted with 217 professional drivers which revealed that the following factors were proposed to influence driving performance: Fatigue, Knowledge of risk, Mood, Impatience and frustration, Speed limits, Experience, Other road users, Passengers, Health, and Culture. The second phase of the study involved piloting the newly developed 38 item Driving Risk Assessment Scale - Work Version (DRAS-WV) with 546 professional drivers. Factor analytic techniques identified a 9 factor solution that was comprised of speeding, aggression, time pressure, distraction, casualness, awareness, maintenance, fatigue and minor damage. Speeding and aggressive driving manoeuvres were identified to be the most frequent aberrant driving behaviours engaged in by the sample. However, a series of logistic regression analyses undertaken to determine the DRAS-WV scale’s ability to predict self-reported crashes revealed limited predictive efficacy e.g., 10% of crashes. This paper outlines proposed reasons for this limited predictive ability of the DRAS-WV as well as provides suggestions regarding the future of research that aims to develop methods to identify “at risk” drivers.

An analytical tool that quantifies cellular morphology changes from three-dimensional fluorescence images

The most common software analysis tools available for measuring fluorescence images are for two-dimensional (2D) data that rely on manual settings for inclusion and exclusion of data points, and computer-aided pattern recognition to support the interpretation and findings of the analysis. It has become increasingly important to be able to measure fluorescence images constructed from three-dimensional (3D) datasets in order to be able to capture the complexity of cellular dynamics and understand the basis of cellular plasticity within biological systems. Sophisticated microscopy instruments have permitted the visualization of 3D fluorescence images through the acquisition of multispectral fluorescence images and powerful analytical software that reconstructs the images from confocal stacks that then provide a 3D representation of the collected 2D images. Advanced design-based stereology methods have progressed from the approximation and assumptions of the original model-based stereology(1) even in complex tissue sections(2). Despite these scientific advances in microscopy, a need remains for an automated analytic method that fully exploits the intrinsic 3D data to allow for the analysis and quantification of the complex changes in cell morphology, protein localization and receptor trafficking. Current techniques available to quantify fluorescence images include Meta-Morph (Molecular Devices, Sunnyvale, CA) and Image J (NIH) which provide manual analysis. Imaris (Andor Technology, Belfast, Northern Ireland) software provides the feature MeasurementPro, which allows the manual creation of measurement points that can be placed in a volume image or drawn on a series of 2D slices to create a 3D object. This method is useful for single-click point measurements to measure a line distance between two objects or to create a polygon that encloses a region of interest, but it is difficult to apply to complex cellular network structures. Filament Tracer (Andor) allows automatic detection of the 3D neuronal filament-like however, this module has been developed to measure defined structures such as neurons, which are comprised of dendrites, axons and spines (tree-like structure). This module has been ingeniously utilized to make morphological measurements to non-neuronal cells(3), however, the output data provide information of an extended cellular network by using a software that depends on a defined cell shape rather than being an amorphous-shaped cellular model. To overcome the issue of analyzing amorphous-shaped cells and making the software more suitable to a biological application, Imaris developed Imaris Cell. This was a scientific project with the Eidgenössische Technische Hochschule, which has been developed to calculate the relationship between cells and organelles. While the software enables the detection of biological constraints, by forcing one nucleus per cell and using cell membranes to segment cells, it cannot be utilized to analyze fluorescence data that are not continuous because ideally it builds cell surface without void spaces. To our knowledge, at present no user-modifiable automated approach that provides morphometric information from 3D fluorescence images has been developed that achieves cellular spatial information of an undefined shape (Figure 1). We have developed an analytical platform using the Imaris core software module and Imaris XT interfaced to MATLAB (Mat Works, Inc.). These tools allow the 3D measurement of cells without a pre-defined shape and with inconsistent fluorescence network components. Furthermore, this method will allow researchers who have extended expertise in biological systems, but not familiarity to computer applications, to perform quantification of morphological changes in cell dynamics.

A simulated annealing algorithm for energy efficient virtual machine placement

Improving energy efficiency has become increasingly important in data centers in recent years to reduce the rapidly growing tremendous amounts of electricity consumption. The power dissipation of the physical servers is the root cause of power usage of other systems, such as cooling systems. Many efforts have been made to make data centers more energy efficient. One of them is to minimize the total power consumption of these servers in a data center through virtual machine consolidation, which is implemented by virtual machine placement. The placement problem is often modeled as a bin packing problem. Due to the NP-hard nature of the problem, heuristic solutions such as First Fit and Best Fit algorithms have been often used and have generally good results. However, their performance leaves room for further improvement. In this paper we propose a Simulated Annealing based algorithm, which aims at further improvement from any feasible placement. This is the first published attempt of using SA to solve the VM placement problem to optimize the power consumption. Experimental results show that this SA algorithm can generate better results, saving up to 25 percentage more energy than First Fit Decreasing in an acceptable time frame.

Energy-efficient virtual machine placement in data centers by genetic algorithm

Server consolidation using virtualization technology has become an important technology to improve the energy efficiency of data centers. Virtual machine placement is the key in the server consolidation. In the past few years, many approaches to the virtual machine placement have been proposed. However, existing virtual machine placement approaches to the virtual machine placement problem consider the energy consumption by physical machines in a data center only, but do not consider the energy consumption in communication network in the data center. However, the energy consumption in the communication network in a data center is not trivial, and therefore should be considered in the virtual machine placement in order to make the data center more energy-efficient. In this paper, we propose a genetic algorithm for a new virtual machine placement problem that considers the energy consumption in both the servers and the communication network in the data center. Experimental results show that the genetic algorithm performs well when tackling test problems of different kinds, and scales up well when the problem size increases.

An analysis of construction productivity in Malaysia

The construction industry is an industry of major strategic importance. Its level of productivity has a significant effect on national economic growth. Productivity indicators are examined. The indicators consist of labour productivity, capital productivity, labour competitiveness, capital intensity and added value content of data, which are obtained from the published census/biannual surveys of the construction industry between the years 1999 and 2011 from the Department of Statistics of Malaysia. The results indicated that there is an improvement in the labour productivity, but the value-added content is declining. The civil engineering and special trades subsectors are more productive than the residential and non-residential subsectors in terms of labour productivity because machine-for-labour substitution is a more important process in those subsectors. The capital-intensive characteristics of civil engineering and special trade works enable these subsectors to achieve higher added value per labour cost but not the capital productivity. The added value per labour cost is lower in larger organizations despite higher capital productivity. However, the capital intensity is lower and unit labour cost is higher in the larger organizations.

The relationship between firm survival and innovation : an introduction to the literature

The rapid growth in use of the Internet as a business tool provides a new perspective in the study of the organizational challenges of new technologies. The innovation literature has grown vastly since its establishment in the 1920s, covering a broad range of disciplines (Foxall 1984) and measures a wide variety of variables (Rogers 1995). At first glance, studies that look at the relationship between innovation and firm survival appear contradictory. However, the results appear compatible when additional factors, such as industry type, organizational age, company size or the duration of the study are taken into account.

An assessment tool for selection of appropriate daylighting solutions for buildings in tropical and subtropical regions : Validation using radiance simulation

A new decision-making tool that will assist designers in the selection of appropriate daylighting solutions for buildings in tropical locations has been previously proposed by the authors. Through an evaluation matrix that prioritizes the parameters that best respond to the needs of tropical climates (e.g. reducing solar gain and protection from glare) the tool determines the most appropriate devices for specific climate and building inputs. The tool is effective in demonstrating the broad benefits and limitations of the different daylight strategies for buildings in the tropics. However for thorough analysis and calibration of the tool, validation is necessary. This paper presents a first step in the validation process. RADIANCE simulations were conducted to compare simulation performance with the performance predicted by the tool. To this end, an office building case study in subtropical Brisbane, Australia, and five different daylighting devices including openings, light guiding systems and light transport systems were simulated. Illuminance, light uniformity, daylight penetration and glare analysis were assessed for each device. The results indicate the tool can appropriately rank and recommend daylighting strategies based on specific building inputs for tropical and subtropical regions, making it a useful resource for designers.

Finding your research voice : the application of bibliometrics as an analytic literature tool on the pedagogic field of higher education

This paper documents the use of bibliometrics as a methodology to bring forth a structured, systematic and rigorous way to analyse and evaluate a range of literature. When starting out and reading broadly for my doctoral studies, one article by Trigwell and Prosser (1996b) led me to reflect about my level of comprehension as the content, concepts and methodology did not resonate with my epistemology. A disconnection between our paradigms emerged. Further reading unveiled the work by Doyle (1987) who categorised research in teaching and teacher education by three main areas: teacher characteristics, methods research and teacher behaviour. My growing concerns that there were gaps in the knowledge also exposed the difficulties in documenting said gaps. As an early researcher who required support to locate myself in the field and to find my research voice, I identified bibliometrics (Budd, 1988; Yeoh & Kaur, 2007) as an appropriate methodology to add value and rigour in three ways. Firstly, the application of bibliometrics to analyse articles is systematic, builds a picture from the characteristics of the literature, and offers a way to elicit themes within the categories. Secondly, by systematic analysis there is occasion to identify gaps within the body of work, limitations in methodology or areas in need of further research. Finally, extension and adaptation of the bibliometrics methodology, beyond citation or content analysis, to investigate the merit of methodology, participants and instruments as a determinant for research worth allowed the researcher to build confidence and contribute new knowledge to the field. Therefore, this paper frames research in the pedagogic field of Higher Education through teacher characteristics, methods research and teacher behaviour, visually represents the literature analysis and locates my research self within methods research. Through my research voice I will present the bibliometrics methodology, the outcomes and document the landscape of pedagogy in the field of Higher Education.

From rhetoric to practice : issues in teaching and learning touch keyboarding

Touch keyboarding as a vocational skill is disappearing at a time when students and educators across alleducational sectors are expected to use a computer keyboard on a regular basis. there is documentation surrounding the embedding of Information and Communication Technology (ICT) within the curricula and yet within the National Training Packages touch keyboarding, previously considered a core component, is now an elective in the Business Services framework. This situation is an odds with current practice overseas where touch keyboarding is a component of primary and secondary curricula. From Rhetoric to Practice explores the current issues and practice in teaching and learning touch keyboarding in primary, secondary and tertiary institutions. Through structured interview participants detailed current practice of teachers and their students. Further, tertiary students participated in a training program aimed at achquiring touch keyboarding as a skill to enhance their studies. The researcher's background experience of fifteen years teaching touch keyboarding and computer literacty to adults and 30 years in Business Services trade provides a strong basis for this project. The teaching experience is enhanced by industry experience in administration, course coordination in technical, community and tertiary institutions and a strong commitment to the efficient usage of a computer by all. The findings of this project identified coursework expectations requiring all students from kindergarten to tertiary to use a computer keyboard on a weekly basis and that neither teaching nor learning tough keyboarding appears in the primary, secondary and tertiary curricula in New South Wales. Further, teachers recognised tough keyboarding as the prefered style over 'hunt and peck' keyboarding while acknowledging the teaching and learning difficulties of time constraints, the need for qualified touch keyboarding teachers and issues arising when retraining students from existing poor habits. In conclusion, this project recommends that computer keyboarding be defined as a writing tool for education, vocation and life, with early instruction set in primary schooling area and embedding touch keyboarding with the secondary, technical and tertiary areas and finally to draw the attention of educational authorities to the Duty Of Care aspects associated with computer keyboarding in the classroom.

The development of a supportive care needs assessment tool for Indigenous people with cancer

Background: Little is known about the supportive care needs of Indigenous people with cancer and to date, existing needs assessment tools have not considered cultural issues for this population. We aimed to adapt an existing supportive care needs assessment tool for use with Indigenous Australians with cancer. Methods: Face-to-face interviews with Indigenous cancer patients (n = 29) and five focus groups with Indigenous key-informants (n = 23) were conducted to assess the face and content validity, cultural acceptability, utility and relevance of the Supportive Care Needs Survey - Short Form 34 (SCNS-SF34) for use with Indigenous patients with cancer. Results: All items from the SCNS-SF34 were shortened and changed to use more appropriate language (e.g. the word 'anxiety' was substituted with 'worry'). Seven questions were omitted (e.g. items on death and future considerations) as they were deemed culturally inappropriate or irrelevant and 12 items were added (e.g. accessible transport). Optional instructions were added before the sexual items. The design and response format of the SCNS-SF34 was modified to make it easier to use for Indigenous cancer patients. Given the extensive modifications to the SCNS-SF34 and the liklihood of a different factor structure we consider this tool to be a new tool rather than a modification. The Supportive care needs assessment tool for Indigenous people (SCNAT-IP) shows promising face and content validity and will be useful in informing services where they need to direct their attention for these patients. Conclusions: Indigenous people with cancer have language, customs and specific needs that are not accommodated within the standard SCNS-SF34. Our SCNAT-IP improves acceptability, relevance and face validity for Indigenous-specific concerns. Our SCNAT-IP will allow screening for supportive care needs that are specific to Indigenous cancer patients' and greatly inform targeted policy development and practice.

Promotion and succession management and associated retention issues in Australian law firms

The focus of this research was promotion and succession management in Australian law firms. Two staff retention issues currently faced by the Australian legal industry were identified as suggesting possible failures in this area: 1) Practitioners are leaving law firms early in their careers, 2) Female representation is disproportionally low at partnership level. The research described current Australian law firm promotion and succession practices and then explained their possible relevance to the two retention issues. The overall aim of the research was to uncover key findings and present practical recommendations to law firm managers and partners ready for incorporation into their future promotion and succession planning practice. In so doing the research aimed to benefit the Australian legal community as a whole. Four areas of literature relevant to the topic were reviewed, 1) law firm governance concluding that the fundamental values of the P²-Form remained constant (Cooper, Hinings, Greenwood & Brown, 1996; Morris & Pinnington, 1998) with ownership and strategic control of law firms remaining in the hands of partners; 2) the importance of individual practitioners to law firms concluding that the actual and opportunity costs relating to practitioner turnover were significant due to the transient nature of knowledge as a key asset of law firms (Gottschalk & Khandelwal, 2004; Rebitzer & Taylor, 2007); 3) generational differences concluding with support for the work of Finegold, Mohrman and Spreitzer (2002), Davis, Pawlowski and Houston (2006), Kuhnreuther (2003), and Avery, McKay, and Wilson (2007) which indicated that generational cohort differences were of little utility in human resources management practice; and 4) previous research relating to law firm promotion and succession practices indicating that five practices were relevant in law firm promotion outcomes; 1) firm billing requirements (Gorman & Kmec, 2009; Phillips, 2001; Noonan & Corcoran, 2004; Webley & Duff, 2007); 2) mentoring programs (Phillips, 2001; Noonan & Corcoran, 2004); 3) the existence of female partners (Gorman & Kmec, 2009; Beckman & Phillips, 2005); 4) non-partner career paths (Phillips, 2001; Corcoran & Noonan, 2004); and 5) the existence of family friendly policies (Gorman & Kmec, 2009; Phillips, 2001; Noonan & Corcoran, 2004; Webley & Duff, 2007.) The research was carried out via a sequential mixed method approach. The initial quantitative study was based upon a theoretical framework grounded in the literature and provided baseline information describing Australian law firm promotion and succession practices. The study was carried out via an on-line survey of Australian law firm practitioners. The results of the study provided the basis for the second qualitative study. The qualitative study further explained the statistically generated results and focused specifically on the two identified retention issues. The study was conducted via one-on-one interviews with Australian law firm partners and experienced law firm managers. The results of both studies were combined within the context of relevant literature resulting in eight key findings: Key findings 1) Organisational commitment levels across generational cohorts are more homogenous than different. 2) Law firm practitioners are leaving law firms early in their careers due to the heavy time commitment behaviour demanded of them, particularly by clients. 3) Law firm promotion and succession practices reinforce practitioner time commitment behaviour marking it as an indicator of practitioner success. 4) Law firm practitioners believe that they have many career options outside law firms and are considering these options. 5) Female practitioners are considering opting out of law firms due to time commitment demands related to partnership conflicting with family commitment demands. 6) A masculine, high time commitment culture in law firms is related to the decision by female practitioners to leave law firms. 7) The uptake of alternative work arrangements by female practitioners is not fatal to their partnership prospects particularly in firms with supportive policies, processes and organisational culture. 8) Female practitioners are less inclined than their male counterparts to seek partnership as an ultimate goal and are more likely to opt out of law firms exhibiting highly competitive, masculine cultures. Practical recommendations Further review of the data collected in relation to the key findings provided the basis for nine practical recommendations specifically geared towards implementation by law firm managers and partners. The first recommendation relates to the use of generational differences in practitioner management. The next six relate to recommended actions to reduce the time commitment demands on practitioners. The final two recommendations relate to the practical implementation of these actions both at an individual and organisational level. The recommendations are as follows: 1) "Generationally driven," age based generalisations should not be utilised in law firm promotion and succession management practice. 2) Expected levels of client access to practitioners be negotiated on a client by client basis and be included in client retention agreements. 3) Appropriate alternative working arrangements such as working off-site, flexible working hours or part-time work be offered to practitioners in situations where doing so will not compromise client serviceability. 4) The copying of long working hour behaviours of senior practitioners should be discouraged particularly where information technology can facilitate remote client serviceability. 5) Refocus the use of timesheets from an employer monitoring tool to an employee empowerment tool. 6) Policies and processes relating to the offer of alternative working arrangements be supported and reinforced by law firm organisational culture. 7) Requests for alternative working arrangements be determined without regard to gender. 8) Incentives and employment conditions offered to practitioners to be individualised based on the subjective need of the individual and negotiated as a part of the current employee performance review process. 9) Individually negotiated employment conditions be negotiated within the context of the firm’s overall strategic planning process. Through the conduct of the descripto-explanatory study, a detailed discussion of current law firm promotion and succession practices was enabled. From this discussion, 7 eight key findings and nine associated recommendations were generated as well as an insight into the future of the profession being given. The key findings and recommendations provide practical advice to law firm managers and partners in relation to their everyday promotion and succession practice. The need to negotiate individual employee workplace conditions and their integration into overall law firm business planning was put forward. By doing so, it was suggested that both the individual employee and the employing law firm would mutually benefit from the arrangement. The study therefore broadened its practical contribution from human resources management to a contribution to the overall management practice of Australian law firms. In so doing, the research has provided an encompassing contribution to the Australian legal industry both in terms of employee welfare as well as firm and industry level success.

Ecological footprinting : its potential as a tool for change in preservice teacher education

Environmental and sustainability issues pose challenges for society. Although education is seen as being a contributor to addressing sustainability, teacher education has been slow to act in preparing future teachers to teach sustainability. Recent Australian curriculum documents nominate sustainability as one of three cross-curriculum priorities. In one Australian university course, an Ecological Footprint Calculator tool has been employed to challenge preservice early childhood teachers to consider the sustainability of their lifestyles as a means for engaging them in learning and teaching for sustainability. Students enrolled in an integrated arts and humanities subject voluntarily engaged with the online calculator and shared their findings on an electronic discussion forum. These postings then became the basis of qualitative analysis and discussion. Data categories included reactions and reflections on reasons for the ‘heaviness’ of their footprints , student reactions leading to actions to reduce their footprints, reflections on the implications of the footprint results for future teaching, reactions that considered the need for societal change, and reflections on the integration of sustainability with the visual arts. The power of the tool’s application to stimulate interest in sustainability and education for sustainability more broadly in teacher education is explored.