975 resultados para literature-data integration
Resumo:
Työn tarkoituksena oli kehittää yrityksen nimikkeiden hallintaa osana uuden toiminnan-ohjausjärjestelmän käyttöönottoprojektia. Tavoitteena oli toiminnanohjausjärjestelmän ja suunnittelun tietojärjestelmien välisen tuotetiedon löydettävyyden ja käytettävyyden kehittäminen tuotteen tilaus –toimitus prosessin näkökulmasta. Työn ongelmaa tarkasteltiin ja analysoitiin tuotetiedon hallintaan ja toiminnanohjausjärjestelmiin liittyvän kirjallisuuden pohjalta. Aineistona käytettiin myös aihepiiriin liittyneitä aiempia tutkimuksia. Diplomityön tuloksena saatiin toiminnanohjausjärjestelmään standardoitu nimikkeistö ostettavista materiaaleista ja sekä itse valmistettavista tuotteista. Suunnittelun ja toiminnanohjausjärjestelmän välinen nimiketietojen siirto mahdollistettiin määrittämällä yhteydet ERP- ja CAD -järjestelmien välille. Järjestelmäintegraation ansiosta suunnittelussa muodostettuja tuoterakenteita voidaan käyttää hyväksi ERP –järjestelmän eri prosesseissa, kuten esimerkiksi tuotannossa ja hankinnoissa. Tehokkaan tuotetiedon hallinnan perusta on toimiva ja standardoitu nimikkeistö. Onnistuneen tiedonhallinnan edellytyksiä ovat tiedon yksikäsitteisyys, ajantasaisuus ja saatavuus. Olemassa olevaa tietoa tulee pystyä käyttämään mahdollisimman tehokkaasti hyväksi
Resumo:
BACKGROUND: In 2008, the Swiss Civil Code was amended. From 1 January 2013, each Swiss canton may propose specific provisions for involuntary outpatient treatment (community treatment orders (CTOs)) for individuals with mental disorders. AIM: This review catalogues the legal provisions of the various Swiss cantons for CTOs and outlines the differences between them. It sets this in the context of variations in clinical provisions between the cantons. METHODS: Databases were searched to obtain relevant publications about CTOs in Switzerland. The Swiss Medical Association, Swiss Federal Statistical Office, Swiss Health Observatory and all the 26 Cantonal medical officers were contacted to complete the information. Conférence des cantons en matière de protection des mineurs et des adultes (COPMA), the authority which monitors guardianship legislation, and Pro Mente Sana, a patients' right association, were also approached. RESULTS: Three articles about CTOs in Switzerland were identified. Psychiatric provisions vary considerably between cantons and only a few could provide complete or even partial figures for rates of compulsion in previous years. Prior to 2013, only 6 of the 20 cantons, for which information was returned, had any provision for CTOs. Now, every canton has some form of legal basis but the level of detail is often limited. In eight cantons, the powers of the measure are not specified (for example, use of medication). In 12 cantons, the maximum duration of the CTO is not specified. German speaking cantons and rural cantons are more likely to specify the details of CTOs. CONCLUSION: Highly variable Swiss provision for CTOs is being introduced despite the absence of convincing international evidence for their effectiveness or good quality data on current coercive practice. Careful monitoring and assessment of these new cantonal provisions are essential.
Resumo:
Työn tavoitteena oli määritellä kirjallisuustutkimuksen ja suunnitteluesimerkin avulla vaatimuksia integroidulle simulointiympäristölle, joka sisältää simulointiohjelmien lisäksi prosessilaitteiden mitoitusohjelmia ja prosessilaite- ja mallitietokannan. Lisäksi pohdittiin simulointiympäristön tuomia etuja prosessissuunnitteluun. Esimerkkinä käytettiin yksinkertaista putkilinjaa. Ensin selvitettiin prosessisuunnittelun kulkua, menetelmiä, apuvälineitä ja ajankohtaisia teemoja kirjallisuuden perusteella. Prosessisuunnittelun menetelmistä keskityttiin yksityiskohtaisemmin prosessisimulointiin. Lisäksi etsittiin kirjallisuudesta esimerkkejä integroiduista suunnitteluympäristöistä. Kirjallisuusselvityksen perusteella määriteltiin yleisiä vaatimuksia integroidulle simulointiympäristölle. Seuraavaksi suunniteltiin esimerkkinä käytetty putkilinja ja kuvattiin suunnittelun eteneminen. Suunnitteluesimerkin avulla pyrittiin tunnistamaan suunnitteluprosessista ne kohdat, joissa integroitu simulointiympäristö helpottaisi työskentelyä sekä pohtimaan yksityiskohtaisemmin integroidun simulointiympäristön toimintoja. Lopuksi kuvattiin putkilinjan suunnittelun eteneminen integroidussa simulointiympäristössä ja pohdittiin sen etuja verrattuna perinteiseen putkilinjan suunnitteluun. Tutkimuksen perusteella integroitu simulointiympäristö tehostaa prosessisuunnittelua siten, että simulointimallien määrittelyissä tarvittavat laitetiedot ovat saatavissa helposti ja nopeasti ohjelmien ymmärtämässä muodossa. Simulointiympäristössä tieto eri sovellusten välillä siirtyy osittain automaattisesti, minkä takia ohjelmiin ei erikseen tarvitse syöttää samoja tietoja. Lisäksi integroitu simulointiympäristö tukee rinnakkaista suunnittelua ja automaatio- ja prosessisuunnittelun integrointia.Jatkotutkimusehdotuksena on lisäselvitykset siitä, miten simulointiympäristö sijoittuisi yrityksissä jo olemassa oleviin suunnittelujärjestelmiin, etenkin tiedonhallintajärjestelmiin nähden. Muina jatkotutkimusehdotuksina on integroidun simulointiympäristön tarkasteleminen automaatiosuunnittelijan kannalta sekä vaatimusmäärittelyjen tarkentaminen. Työssä ei juuri ole kiinnitetty huomiota siihen, kuinka helposti ehdotetut simulointiympäristön toiminnot ja vaatimukset ovat toteutettavissa teknisesti tai ylipäätään ovatko toteutettavissa, joten tämäkin vaatinee jatkotutkimuksia.
Resumo:
Työn tavoitteena oli laatia euron käyttöönottosuunnitelma. Ensin selvitettiin euron syntyvaiheet ja yhteisen valuutan käsittelysäännöt. Sen jälkeen käydään läpi eräs käyttökelpoinen suunnitelma euron käyttöönottamiseksi, johon kuuluu euron käyttöönoton and speed up the implementation of external selection components. Model and Parametrisation Gallery for Process Integration is specification of an infrastructure and a set of tools which are built for storing process component and model library data into an internet based database from where it can be easily used by simulator users and other process designers. This work consists of two parts. In the literature survey pump selection and the factors that affects selection particularly on process designers point of view are studied. In the applied part a pump selector was created and tested in the test environment which is comparable to Gallery environment. This was done to ease the deployment of the selector to the actual working environment. Process component data of a manufacturer was used on the development of the pump selector. The execution of the selector is based on the hydraulic selection of pumps. Centrifugal pump was used as an example case.
Resumo:
Työn tavoitteena oli määrittää myyntikonfiguraattorissa käytettävän tuotemallin yleinen rakenne. Ensin selvitettiin tuotemallin luomista ja konseptin suunnittelua kirjallisuuden ja asiantuntijoiden haastattelujen avulla. Asiantuntijoiden haastattelut toteutettiin vapaamuotoisesti kysymyslistaa apuna käyttäen. Tämän lisäksi työssä pohditaan sähköisen liiketoiminnan roolia sekä myyntikonfiguraattorin tulevaisuuden näkymiä. Diplomityössä käsitellään tuotemallia yleisellä tasolla. Toinen näkökulma käsittelee tuotemallia tietoteknisissä sovelluksissa käytettyjen menetelmien pohjalta. Tuotemallin muodostaminen aloitettiin asiakkaalle näkyvästä osasta eli myyntikonfiguraattorin ulkoasusta. Seuraava ongelma oli standardoida tuotetta ja tarjousta kuvaavat dokumentit globaalisti. Tähän ratkaisuun päädyttiin haastattelujen sekä asiantuntijoiden kokoontumisien pohjalta. Loppuosa diplomityöstä käsittelee myyntikonfiguraattorin asemaa kohdeyrityksen sähköisessä liiketoiminnassa sekä esittelee erään näkemyksen myyntikonfiguraattorin yhteenliittymästä asiakashallinta- ja tuotetiedonhallinta järjestelmiin. Diplomityössä saavutettiin asetetut tavoiteet: Myyntikonfigurattori yhtenäistää kohdeyrityksen hinnoittelua globaalisti, nopeuttaa tarjouksentekoprosessia, helpottaa uuden tuotteen lanseerausta ja standardoi tuotemallin globaalisti. Myyntikonfiguraattorin integrointi muihin tietojärjestelmiin tehostaa myynnin toimintoja. Haasteeksi jää loppukäyttäjien kannustaminen tehokkaaseen käyttöön sekä ylläpidon toteuttaminen. Ilman käyttäjiä ja heidän innostustaan voi projekti menettää johdon luottamuksen.
Resumo:
This master’s thesis aims to study and represent from literature how evolutionary algorithms are used to solve different search and optimisation problems in the area of software engineering. Evolutionary algorithms are methods, which imitate the natural evolution process. An artificial evolution process evaluates fitness of each individual, which are solution candidates. The next population of candidate solutions is formed by using the good properties of the current population by applying different mutation and crossover operations. Different kinds of evolutionary algorithm applications related to software engineering were searched in the literature. Applications were classified and represented. Also the necessary basics about evolutionary algorithms were presented. It was concluded, that majority of evolutionary algorithm applications related to software engineering were about software design or testing. For example, there were applications about classifying software production data, project scheduling, static task scheduling related to parallel computing, allocating modules to subsystems, N-version programming, test data generation and generating an integration test order. Many applications were experimental testing rather than ready for real production use. There were also some Computer Aided Software Engineering tools based on evolutionary algorithms.
Resumo:
Dissolved organic matter (DOM) is a complex mixture of organic compounds, ubiquitous in marine and freshwater systems. Fluorescence spectroscopy, by means of Excitation-Emission Matrices (EEM), has become an indispensable tool to study DOM sources, transport and fate in aquatic ecosystems. However the statistical treatment of large and heterogeneous EEM data sets still represents an important challenge for biogeochemists. Recently, Self-Organising Maps (SOM) has been proposed as a tool to explore patterns in large EEM data sets. SOM is a pattern recognition method which clusterizes and reduces the dimensionality of input EEMs without relying on any assumption about the data structure. In this paper, we show how SOM, coupled with a correlation analysis of the component planes, can be used both to explore patterns among samples, as well as to identify individual fluorescence components. We analysed a large and heterogeneous EEM data set, including samples from a river catchment collected under a range of hydrological conditions, along a 60-km downstream gradient, and under the influence of different degrees of anthropogenic impact. According to our results, chemical industry effluents appeared to have unique and distinctive spectral characteristics. On the other hand, river samples collected under flash flood conditions showed homogeneous EEM shapes. The correlation analysis of the component planes suggested the presence of four fluorescence components, consistent with DOM components previously described in the literature. A remarkable strength of this methodology was that outlier samples appeared naturally integrated in the analysis. We conclude that SOM coupled with a correlation analysis procedure is a promising tool for studying large and heterogeneous EEM data sets.
Resumo:
PURPOSE: To develop a consensus opinion regarding capturing diagnosis-timing in coded hospital data. METHODS: As part of the World Health Organization International Classification of Diseases-11th Revision initiative, the Quality and Safety Topic Advisory Group is charged with enhancing the capture of quality and patient safety information in morbidity data sets. One such feature is a diagnosis-timing flag. The Group has undertaken a narrative literature review, scanned national experiences focusing on countries currently using timing flags, and held a series of meetings to derive formal recommendations regarding diagnosis-timing reporting. RESULTS: The completeness of diagnosis-timing reporting continues to improve with experience and use; studies indicate that it enhances risk-adjustment and may have a substantial impact on hospital performance estimates, especially for conditions/procedures that involve acutely ill patients. However, studies suggest that its reliability varies, is better for surgical than medical patients (kappa in hip fracture patients of 0.7-1.0 versus kappa in pneumonia of 0.2-0.6) and is dependent on coder training and setting. It may allow simpler and more precise specification of quality indicators. CONCLUSIONS: As the evidence indicates that a diagnosis-timing flag improves the ability of routinely collected, coded hospital data to support outcomes research and the development of quality and safety indicators, the Group recommends that a classification of 'arising after admission' (yes/no), with permitted designations of 'unknown or clinically undetermined', will facilitate coding while providing flexibility when there is uncertainty. Clear coding standards and guidelines with ongoing coder education will be necessary to ensure reliability of the diagnosis-timing flag.
Resumo:
Tämän tutkielman tavoitteena oli tarkastella tapahtumamarkkinoinnin suunnittelua osana yrityksen markkinointiviestintästrategiaa. Tutkielma jakautuu teoreettiseen ja empiiriseen osaan. Teoriaosassa muodostettavan tapahtumamarkkinoinnin suunnittelumallin avulla kuvataan empiriassa kohdeyrityksen tapahtumamarkkinoinnin suunnittelua osana yrityksen markkinointiviestintästrategiaa. Teoriaosan lähdeaineistona käytettiin keskeistä tapahtumamarkkinointia ja markkinointiviestintää käsittelevää kirjallisuutta. Tutkielman empiirinen aineisto kerättiin haastattelemalla kohdeyrityksen markkinointipäällikköä ja hyödyntämällä sekundääritietolähteitä. Tutkielman lähtökohtana oli ensin selvittää tapahtumamarkkinoinnin käsite sekä sen suhde markkinointiviestintään ennen varsinaisen suunnittelumallin muodostamista. Havaittiin, että tapahtumamarkkinointi käsitteenä on erittäin moniulotteinen, ja että tapahtumamarkkinointia käsitellään yrityksissä usein muusta markkinointiviestinnästä erillisenä kokonaisuutena. Verrattaessa teorian esittämää tapahtumamarkkinoinnin suunnittelumallia empirian todelliseen tilanteeseen huolellisen suunnittelun ja toteutuksen merkitys korostui tapahtumamarkkinoinnin onnistumisessa. Jotta tapahtumamarkkinointi toimisi entistä tehokkaammin markkinointiviestinnän osana, tulisi yritysten kiinnittää huomiota erityisesti tavoiteasetantaan ja seurantaan. Tutkielmassa korostuu eri markkinointiviestintäkeinojen integroimisen tärkeys, jotta yritys pystyy hyödyntämään tapahtumamarkkinointiaan parhaalla mahdollisella tavalla.
Resumo:
Minimizing the risks of an investment portfolio but not in the favour of expected returns is one of the key interests of an investor. Typically, portfolio diversification is achieved using two main strategies: investing in different classes of assets thought to have little or negative correlations or investing in similar classes of assets in multiple markets through international diversification. This study investigates integration of the Russian financial markets in the time period of January 1, 2003 to December 28, 2007 using daily data. The aim is to test the intra-country and cross-country integration of the Russian stock and bond markets between seven countries. Our test methodology for the short-run dynamics testing is the vector autoregressive model (VAR) and for the long-run cointegration testing we use the Johansen cointegration test which is an extension to VAR. The empirical results of this study show that the Russian stock and bond markets are not integrated in the long-run either at intra-country or cross-country level which means that the markets are relatively segmented. The short-run dynamics are also relatively low. This implies a presence of potential gains from diversification.
Resumo:
The cellular DNA repair hRAD51 protein has been shown to restrict HIV-1 integration both in vitro and in vivo. To investigate its regulatory functions, we performed a pharmacological analysis of the retroviral integration modulation by hRAD51. We found that, in vitro, chemical activation of hRAD51 stimulates its integration inhibitory properties, whereas inhibition of hRAD51 decreases the integration restriction, indicating that the modulation of HIV-1 integration depends on the hRAD51 recombinase activity. Cellular analyses demonstrated that cells exhibiting high hRAD51 levels prior to de novo infection are more resistant to integration. On the other hand, when hRAD51 was activated during integration, cells were more permissive. Altogether, these data establish the functional link between hRAD51 activity and HIV-1 integration. Our results highlight the multiple and opposite effects of the recombinase during integration and provide new insights into the cellular regulation of HIV-1 replication.
Resumo:
INTRODUCTION: Pyoderma gangrenosum (PG) is a rare autoinflammatory neutrophilic ulcerative skin disease, often developing after a trauma or surgical wounds. In the literature there are several reports of post-surgical PG (PSPG) of the breast. The authors of this article experienced an impressive case of PSPG after an aesthetic breast augmentation mastopexy. PSPG is a rare but severe complication in this elective aesthetic surgical procedure. METHOD: A systematic review of the literature was performed, focusing on PSPG after aesthetic breast surgery (augmentation mammoplasty/mastopexy). The online databases Pubmed, Medline, and Cochrane were used and additionally a Google© search was conducted. We compared the data obtained from a systematic literature review to an index case of PSPG after esthetic augmentation mammoplasty. RESULTS: The literature search identified seven articles describing eight cases of PSPG after aesthetic breast surgery. In four of these cases augmentation mammoplasty had been carried out, in two cases mastopexy and in two cases augmentation mammoplasty and mastopexy (augmentation mastopexy). The patient we treated and describe in this paper underwent an augmentation mastopexy outside our clinic. Eight patients suffered from local disease, at the site of surgical wounds, one patient had disseminated disease. Leukocytosis was present in five cases (out of nine). Eight patients had received corticosteroid treatment, one patient refused such treatment. The duration of corticosteroid treatment was on average for 41 days (range 21-60 days). In all cases, the areola had been spared. Complete healing of PSPG was observed on average after 5 months (range 1.5 months-1 year). DISCUSSION: PSPG of the breast after aesthetic breast surgery is rare, but every plastic surgeon should consider this possibility, especially if skin disease develops post-surgery, mimicking wound infection that does not respond to broad-spectrum antibiotic treatment. CONCLUSION: Although the literature does not recommend this step, implant removal is recommended by the authors because bacterial wound infection normally cannot be ruled out definitely in the early stages of disease. Additional surgical intervention should be limited to the absolute necessary and performed only under adequate systemic immunosuppressive therapy. LEVEL OF EVIDENCE V: This journal requires that authors assign a level of evidence to each article. For a full description of these Evidence-Based Medicine ratings, please refer to the Table of Contents or the online Instructions to Authors www.springer.com/00266 .
Resumo:
BACKGROUND: In published case reports, tocilizumab (TCZ) has shown good efficacy for AA amyloidosis in almost all patients. We investigated the efficacy and safety of TCZ in AA amyloidosis in a multicentre study of unselected cases. METHODS: We e-mailed rheumatology and internal medicine departments in France, Switzerland and North Africa by using the Club Rhumatismes Inflammation (CRI) network and the French TCZ registry, Registry RoAcTEmra (REGATE), to gather data on consecutive patients with histologically proven AA amyloidosis who had received at least one TCZ infusion. Efficacy was defined as a sustained decrease in proteinuria level and/or stable or improved glomerular filtration rate (GFR) and by TCZ maintenance. RESULTS: We collected 12 cases of AA amyloidosis treated with TCZ as monotherapy (mean age of patients 63 ± 16.2 years, amyloidosis duration 20.6 ± 31.3 months): eight patients had rheumatoid arthritis (RA), six with previous failure of anti-tumor necrosis factor α (anti-TNF-α) therapy. In total, 11 patients had renal involvement, with two already on hemodialysis (not included in the renal efficacy assessment). For the nine other patients, baseline GFR and proteinuria level were 53.6 ± 32.8 mL/min and 5 ± 3.3 g/24 h, respectively. The mean follow-up was 13.1 ± 11 months. TCZ was effective for six of the eight RA patients (87.5%) according to European League Against Rheumatism response criteria (four good and two moderate responders). As expected, C-reactive protein (CRP) level decreased with treatment for 11 patients. Renal amyloidosis (n = 9) progressed in three patients and was stabilized in three. Overall, three patients showed improvement, with sustained decrease in proteinuria level (42%, 82% and 96%). Baseline CRP level was higher in subsequent responders to TCZ than other patients (p = 0.02). Among the six RA patients with previous anti-TNF-α therapy, amyloidosis was ameliorated in one and stabilized in three. Three serious adverse events occurred (two diverticulitis and one major calciphylaxia due to renal failure). Finally, 7 of 12 (58%) patients continued TCZ. CONCLUSIONS: The efficacy of TCZ for AA amyloidosis varies depending on the inflammatory status at treatment onset. Discrepancies between our study of unselected consecutive patients and reported cases may be due to publication bias. These results support further prospective trials of TCZ for AA amyloidosis.
Resumo:
Objective: The objective of this study was to collect data on the prevalence of smokers among Catalonian dentists (by age and sex) and compare them with existing data on the general population, doctors, registered nurses and pharmacists. The overall prevalence of smokers in Catalonia (2006) was 34.5% of men and 24.3% of women. Data available on the prevalence of smoking among doctors (26.3% men and 22.1% women), pharmacists (19.8% men and 20.6% women) and registered nurses (34.1% men and 35.3% women) relates to the year 2002. Study design: In September 2006, Catalonian dentists (n=3,799) were asked about their habits in relation to tobacco in a self-administered questionnaire, on use and opinions with respect to dental amalgam. Five hundred and seventynine questionnaires were received, of which 538 answered the question on smoking (14.2% of the sample universe). Results: The prevalence of smokers among dentists is lower (24.9% of men and 18.4% of women) than in the general population and other healthcare professionals. In dentists in the age group between 25 and 34 years, the prevalence was 26.1% in men and 14.9% in women, while the prevalence in this age group in the general population was 43.6% and 37.1%, respectively. Conclusion: Catalonian dentists have a much lower prevalence of tobacco use than the general population and lower even than other healthcare professionals. Given that non-smoking healthcare professionals have better awareness for providing recommendations for smoking prevention and cessation, Catalonian dentists may be a valid group for performing this task for which there is scientific evidence.
Resumo:
An increasing number of studies in recent years have sought to identify individual inventors from patent data. A variety of heuristics have been proposed for using the names and other information disclosed in patent documents to establish who is who in patents. This paper contributes to this literature by describing a methodology for identifying inventors using patents applied to the European Patent Office, EPO hereafter. As in much of this literature, we basically follow a threestep procedure : 1- the parsing stage, aimed at reducing the noise in the inventor’s name and other fields of the patent; 2- the matching stage, where name matching algorithms are used to group similar names; and 3- the filtering stage, where additional information and various scoring schemes are used to filter out these similarlynamed inventors. The paper presents the results obtained by using the algorithms with the set of European inventors applying to the EPO over a long period of time.