The role of human factors in led outdoor activity accidents: literature review and exploratory analysis

While the exact rate of incidence is unknown (due to the paucity of exposure data), it is acknowledged that safety compromising accidents and incidents occur in the led outdoor activity domain, and that they represent an important issue. Despite this, compared to other safety critical domains, very little is currently known about the key causal factors involved in such accidents and incidents. This report presents the findings derived from a review of the literature, the aim of which was to identify the Human Factors-related issues involved in accidents and incidents occurring in this area. In addition, to demonstrate the utility of systems-based, theoretically underpinned accident analysis methodologies for identifying the systemic and human contribution to accidents and incidents occurring in the led outdoor activity domain, three case-study accidents were analysed using two such approaches. In conclusion, the review identified a range of causal factors cited in the literature; however, it was noted that the majority of the research undertaken to date lacks theoretical underpinning and focuses mainly on instructor or activity leader causal factors, as opposed to the wider system failures involved. The accident analysis presented highlighted the utility of systems-based, theoretically underpinned accident analysis methodologies for analysing and learning from accidents and incidents in the led outdoor activity sector. In closing, the need for further research in the area is articulated, in particular focussing on the development of standardised and universally accepted accident and incident reporting systems and databases, the development of data driven, theoretically underpinned causal factor taxonomies, and the development and application of systems-based accident analysis methodologies.

Offending behaviour and mental illness : characteristics of a mental health court liaison service

This paper begins with a brief review of recent literature about relationships between offending behaviour and mental illness, classifying studies by the settings within which they occurred. The establishment and role of a mental health court liaison (MHCL) service is then described, together with findings from a 3-year service audit, including an examination of relationships between clients’ characteristics and offence profiles, and comparisons with regional offence data. During the audit period, 971 clients (767 males, 204 females) were referred to the service, comprising 1139 service episodes, 35.5% of which involved a comorbid substance use diagnosis. The pattern of offences for MHCL clients was reasonably similar to the regional offence data, except that among MHCL clients there were proportionately more offences against justice procedures (e.g., breaches of apprehended violence orders [AVOs]) and fewer driving offences and “other offences”. Additionally, male MHCL clients had proportionately more malicious damage and robbery offences and lower rates of offensive behaviour and drug offences. A range of service and research issues is also discussed. Overall, the new service appears to have forged more effective links between the mental health and criminal justice systems.

The primacy of vital signs – Acute care nurses’ and midwives’ use of physical assessment skills: A cross sectional study

BACKGROUND: Registered nurses and midwives play an essential role in detecting patients at risk of deterioration through ongoing assessment and action in response to changing health status. Yet, evidence suggests that clinical deterioration frequently goes unnoticed in hospitalised patients. While much attention has been paid to early warning and rapid response systems, little research has examined factors related to physical assessment skills. OBJECTIVES: To determine a minimum data set of core skills used during nursing assessment of hospitalised patients and identify nurse and workplace predictors of the use of physical assessment to detect patient deterioration. DESIGN: The study used a single-centre, cross-sectional survey design. SETTING and PARTICIPANTS: The study included 434 registered nurses and midwives (Grades 5-7) involved in clinical care of patients on acute care wards, including medicine, surgery, oncology, mental health and maternity service areas, at a 929-bed tertiary referral teaching hospital in Southeast Queensland, Australia. METHODS: We conducted a hospital-wide survey of registered nurses and midwives using the 133-item Physical Assessment Skills Inventory and the 58-item Barriers to Registered Nurses’ Use of Physical Assessment scale. Median frequency for each physical assessment skill was calculated to determine core skills. To explore predictors of core skill utilisation, backward stepwise general linear modelling was conducted. Means and regression coefficients are reported with 95% confidence intervals. A p value < .05 was considered significant for all analyses. RESULTS: Core skills used by most nurses every time they worked included assessment of temperature, oxygen saturation, blood pressure, breathing effort, skin, wound and mental status. Reliance on others and technology (F = 35.77, p < .001), lack of confidence (F = 5.52, p = .02), work area (F = 3.79, p = .002), and clinical role (F = 44.24, p < .001) were significant predictors of the extent of physical assessment skill use. CONCLUSIONS: The increasing acuity of the acute care patient plausibly warrants more than vital signs assessment; however, our study confirms nurses’ physical assessment core skill set is mainly comprised of vital signs. The focus on these endpoints of deterioration as dictated by early warning and rapid response systems may divert attention from and devalue comprehensive nursing assessment that could detect subtle changes in health status earlier in the patient's hospitalisation.

Automotive modal lock-in: The role of path dependence and large socio-economic regimes in market failure

This paper addresses less recognised factors which influence the diffusion of a particular technology. While an innovation’s attributes and performance are paramount, many fail because of external factors which favour an alternative. This paper, with theoretic input from diffusion, lock-in and path-dependency, presents a qualitative study of external factors that influenced the evolution of transportation in USA. This historical account reveals how one technology and its emergent systems become dominant while other choices are overridden by socio-political, economic and technological interests which include not just the manufacturing and service industries associated with the automobile but also government and market stakeholders. Termed here as a large socio-economic regime (LSER),its power in ensuring lock-in and continued path-dependency is shown to pass through three stages, weakening eventually as awareness improves. The study extends to transport trends in China, Korea, Indonesia and Malaysia and they all show the dominant role of an LSER. As transportation policy is increasingly accountable to address both demand and environmental concerns and innovators search for solutions, this paper presents important knowledge for innovators, marketers and policy makers for commercial and societal reasons, especially when negative externalities associated with an incumbent transportation technology may lead to market failure.

Evolutionary optimization and game strategies for advanced multi-disciplinary design : applications to aeronautics and UAV design

Many complex aeronautical design problems can be formulated with efficient multi-objective evolutionary optimization methods and game strategies. This book describes the role of advanced innovative evolution tools in the solution, or the set of solutions of single or multi disciplinary optimization. These tools use the concept of multi-population, asynchronous parallelization and hierarchical topology which allows different models including precise, intermediate and approximate models with each node belonging to the different hierarchical layer handled by a different Evolutionary Algorithm. The efficiency of evolutionary algorithms for both single and multi-objective optimization problems are significantly improved by the coupling of EAs with games and in particular by a new dynamic methodology named “Hybridized Nash-Pareto games”. Multi objective Optimization techniques and robust design problems taking into account uncertainties are introduced and explained in detail. Several applications dealing with civil aircraft and UAV, UCAV systems are implemented numerically and discussed. Applications of increasing optimization complexity are presented as well as two hands-on test cases problems. These examples focus on aeronautical applications and will be useful to the practitioner in the laboratory or in industrial design environments. The evolutionary methods coupled with games presented in this volume can be applied to other areas including surface and marine transport, structures, biomedical engineering, renewable energy and environmental problems.

Information Security and Privacy : Proceedings of the 9th Australasian Conference, ACISP 2004, Sydney, Australia, July 13-15, 2004.

Preface The 9th Australasian Conference on Information Security and Privacy (ACISP 2004) was held in Sydney, 13–15 July, 2004. The conference was sponsored by the Centre for Advanced Computing – Algorithms and Cryptography (ACAC), Information and Networked Security Systems Research (INSS), Macquarie University and the Australian Computer Society. The aims of the conference are to bring together researchers and practitioners working in areas of information security and privacy from universities, industry and government sectors. The conference program covered a range of aspects including cryptography, cryptanalysis, systems and network security. The program committee accepted 41 papers from 195 submissions. The reviewing process took six weeks and each paper was carefully evaluated by at least three members of the program committee. We appreciate the hard work of the members of the program committee and external referees who gave many hours of their valuable time. Of the accepted papers, there were nine from Korea, six from Australia, five each from Japan and the USA, three each from China and Singapore, two each from Canada and Switzerland, and one each from Belgium, France, Germany, Taiwan, The Netherlands and the UK. All the authors, whether or not their papers were accepted, made valued contributions to the conference. In addition to the contributed papers, Dr Arjen Lenstra gave an invited talk, entitled Likely and Unlikely Progress in Factoring. This year the program committee introduced the Best Student Paper Award. The winner of the prize for the Best Student Paper was Yan-Cheng Chang from Harvard University for his paper Single Database Private Information Retrieval with Logarithmic Communication. We would like to thank all the people involved in organizing this conference. In particular we would like to thank members of the organizing committee for their time and efforts, Andrina Brennan, Vijayakrishnan Pasupathinathan, Hartono Kurnio, Cecily Lenton, and members from ACAC and INSS.

Multi-rotor with suspended load: System dynamics and control toolbox

There is an increasing demand for Unmanned Aerial Systems (UAS) to carry suspended loads as this can provide significant benefits to several applications in agriculture, law enforcement and construction. The load impact on the underlying system dynamics should not be neglected as significant feedback forces may be induced on the vehicle during certain flight manoeuvres. The constant variation in operating point induced by the slung load also causes conventional controllers to demand increased control effort. Much research has focused on standard multi-rotor position and attitude control with and without a slung load. However, predictive control schemes, such as Nonlinear Model Predictive Control (NMPC), have not yet been fully explored. To this end, we present a novel controller for safe and precise operation of multi-rotors with heavy slung load in three dimensions. The paper describes a System Dynamics and Control Simulation Toolbox for use with MATLAB/SIMULINK which includes a detailed simulation of the multi-rotor and slung load as well as a predictive controller to manage the nonlinear dynamics whilst accounting for system constraints. It is demonstrated that the controller simultaneously tracks specified waypoints and actively damps large slung load oscillations. A linear-quadratic regulator (LQR) is derived and control performance is compared. Results show the improved performance of the predictive controller for a larger flight envelope, including aggressive manoeuvres and large slung load displacements. The computational cost remains relatively small, amenable to practical implementations.

The role of innovation intermediaries in collaborative networks of small and medium-sized enterprises

The major challenge of European Union’s agricultural industry is to ensure sustainable supply of quality food that meets the demands of a rapidly growing population, changing dietary patterns, increased competition for land use, and environmental concerns. Investments in research and innovation, which facilitate integration of external knowledge in food chain operations, are crucial to undertaking such challenges. This paper addresses how SMEs successfully innovate within collaborative networks with the assistance of innovation intermediaries. In particular, we explore the roles of innovation intermediaries in knowledge acquisition, knowledge assimilation, knowledge, transformation, and knowledge exploitation in open innovation initiatives from the wine industry through the theoretical lens of absorptive capacity. Based on two case studies from the wine industry, we identified seven key activities performed by innovation intermediaries that complement SMEs’ ability to successfully leverage external sources of knowledge for innovation purposes. These activities are articulation of knowledge needs and innovation capabilities, facilitation of social interactions, establishment of complementary links, implementation of governance structures, conflict management, enhancement of transparency, and mediation of communication. Our in-depth qualitative study of two innovation intermediaries in the wine industry has several important implications that contribute to research and practice.

Change visualisation: Analysing the resource and timing differences between two event logs

With organisations facing significant challenges to remain competitive, Business Process Improvement (BPI) initiatives are often conducted to improve the efficiency and effectiveness of their business processes, focussing on time, cost, and quality improvements. Event logs which contain a detailed record of business operations over a certain time period, recorded by an organisation's information systems, are the first step towards initiating evidence-based BPI activities. Given an (original) event log as a starting point, an approach to explore better ways to execute a business process was developed, resulting in an improved (perturbed) event log. Identifying the differences between the original event log and the perturbed event log can provide valuable insights, helping organisations to improve their processes. However, there is a lack of automated techniques to detect the differences between two event logs. Therefore, this research aims to develop visualisation techniques to provide targeted analysis of resource reallocation and activity rescheduling. The differences between two event logs are first identified. The changes between the two event logs are conceptualised and realised with a number of visualisations. With the proposed visualisations, analysts will then be able to identify the changes related to resource and time, resulting in a more efficient business process. Ultimately, analysts can make use of this comparative information to initiate evidence-based BPI activities.

Pull-through strength of high tensile steel cladding systems

The profiled steel roof and wall cladding systems in Australia are commonly made of very thin high tensile steels, and are crest-fixed with screw fasteners. A review of current literature and design standards indicated the need to improve the understanding of the behaviour of crest-fixed steel cladding systems under wind uplift/suction loading, in particular, the local failures. Therefore a detailed experimental study using a series of small scale tests and some two-span cladding tests was conducted to investigate the local pull-through and dimpling failures in the commonly used steel cladding systems. The applicability of the current design formulae for the pull-through strength of crest-fixed steel classing systems was investigated first. An improved design formula was then developed in terms of the thickness and ultimate tensile strenth of steel cladding material and diameter of screw head or washer. This paper presents the details of this investigation and its results. A review of current design and test methods is also included.

Comparison of visual inspection and structural-health monitoring as bridge condition assessment methods

This paper presents the results of a research project aimed at examining the capabilities and challenges of two distinct but not mutually exclusive approaches to in-service bridge assessment: visual inspection and installed monitoring systems. In this study, the intended functionality of both approaches was evaluated on its ability to identify potential structural damage and to provide decision-making support. Inspection and monitoring are compared in terms of their functional performance, cost, and barriers (real and perceived) to implementation. Both methods have strengths and weaknesses across the metrics analyzed, and it is likely that a hybrid evaluation technique that adopts both approaches will optimize efficiency of condition assessment and ultimately lead to better decision making.

Latinos and political advocacy for cancer control in a United States-Mexico border community

Health policy interventions provide powerful tools for addressing health disparities. The Latino community is one of the fastest growing communities in the United States yet is largely underrepresented in government and advocacy efforts. This study includes 42 Latino adults (M age 5 45 years) who participated in focus group discussions and completed a brief questionnaire assessing their experiences with political health advocacy. Qualitative analyses revealed participants considered cancer a concern for the Latino community, but there was a lack of familiarity with political advocacy and its role in cancer control. Participants identified structural, practical, cultural, and contextual barriers to engaging in political health advocacy. This article presents a summary of the findings that suggest alternative ways to engage Latinos in cancer control advocacy.

QoE modelling for VP9 and H.265 videos on mobile devices

Current mobile devices and streaming video services support high definition (HD) video, increasing expectation for more contents. HD video streaming generally requires large bandwidth, exerting pressures on existing networks. New generation of video compression codecs, such as VP9 and H.265/HEVC, are expected to be more effective for reducing bandwidth. Existing studies to measure the impact of its compression on users’ perceived quality have not been focused on mobile devices. Here we propose new Quality of Experience (QoE) models that consider both subjective and objective assessments of mobile video quality. We introduce novel predictors, such as the correlations between video resolution and size of coding unit, and achieve a high goodness-of-fit to the collected subjective assessment data (adjusted R-square >83%). The performance analysis shows that H.265 can potentially achieve 44% to 59% bit rate saving compared to H.264/AVC, slightly better than VP9 at 33% to 53%, depending on video content and resolution.

Combining HPLC-DAD and ICP-MS data for improved analysis of complex samples: Classification of the root samples from Cortex moutan

A combined data matrix consisting of high performance liquid chromatography–diode array detector (HPLC–DAD) and inductively coupled plasma-mass spectrometry (ICP-MS) measurements of samples from the plant roots of the Cortex moutan (CM), produced much better classification and prediction results in comparison with those obtained from either of the individual data sets. The HPLC peaks (organic components) of the CM samples, and the ICP-MS measurements (trace metal elements) were investigated with the use of principal component analysis (PCA) and the linear discriminant analysis (LDA) methods of data analysis; essentially, qualitative results suggested that discrimination of the CM samples from three different provinces was possible with the combined matrix producing best results. Another three methods, K-nearest neighbor (KNN), back-propagation artificial neural network (BP-ANN) and least squares support vector machines (LS-SVM) were applied for the classification and prediction of the samples. Again, the combined data matrix analyzed by the KNN method produced best results (100% correct; prediction set data). Additionally, multiple linear regression (MLR) was utilized to explore any relationship between the organic constituents and the metal elements of the CM samples; the extracted linear regression equations showed that the essential metals as well as some metallic pollutants were related to the organic compounds on the basis of their concentrations