Comportamento mecânico e desempenho estrutural de materiais reciclados e estabilizados com espuma de asfalto.

Em busca de soluções estruturais para restauração de pavimentos rodoviários que que sejam eficientes, mas ao mesmo tempo que sejam econômicas e impactem o mínimo possível na dinâmica de operação da malha rodoviária, tem sido difundida a metodologia de reciclagem a frio de pavimentos com a estabilização com espuma de asfalto. A redução de custos devido a reutilização de material e a menor necessidade de transporte de insumos, além da possibilidade de realização da restauração em um curto espaço de tempo, têm contribuído para a crescente utilização do processo. Este trabalho tem como objetivo avaliar o desempenho e o comportamento mecânico de uma mistura reciclada estabilizada com espuma asfalto, para melhor entender os efeitos do confinamento e do teor de umidade do material, visto que este passa por um processo de cura quando já em serviço. Foi acompanhado um trecho experimental onde o pavimento foi restaurado com a aplicação de uma base reciclada estabilizada com espuma de asfalto. O segmento foi monitorado através do controle tecnológico de execução e de levantamentos deflectométricos com FWD. Verificou-se que as deflexões após quase 24 meses da execução do trecho reduziram consideravelmente. Paralelamente, foram realizados ensaios de resistência à tração por compressão diametral, módulo de resiliência triaxial e de deformação permanente para diferentes procedimentos de cura para verificação do efeito da saída da água nas mudanças de comportamento mecânico do material. Verificou-se ainda o efeito das tensões de confinamento no módulo de resiliência de materiais estabilizados com espuma de asfalto e determinaram-se os parâmetros de cisalhamento do material através de ensaiosTriaxiais Monotônicos. Pode-se concluir que a cura é uma consideração importante tanto com relação a sua duração, quanto com relação ao seu efeito no comportamento do material.

Models and methods for the direct simulation of rough and micropatterned surfaces

Friction in hydrodynamic bearings are a major source of losses in car engines ([69]). The extreme loading conditions in those bearings lead to contact between the matching surfaces. In such conditions not only the overall geometry of the bearing is relevant, but also the small-scale topography of the surface determines the bearing performance. The possibility of shaping the surface of lubricated bearings down to the micrometer ([57]) opened the question of whether friction can be reduced by mean of micro-textures, with mixed results. This work focuses in the development of efficient numerical methods to solve thin film (lubrication) problems down to the roughness scale of measured surfaces. Due to the high velocities and the convergent-divergent geometries of hydrodynamic bearings, cavitation takes place. To treat cavitation in the lubrication problem the Elrod- Adams model is used, a mass-conserving model which has proven in careful numerical ([12]) and experimental ([119]) tests to be essential to obtain physically meaningful results. Another relevant aspect of the modeling is that the bearing inertial effects are considered, which is necessary to correctly simulate moving textures. As an application, the effects of micro-texturing the moving surface of the bearing were studied. Realistic values are assumed for the physical parameters defining the problems. Extensive fundamental studies were carried out in the hydrodynamic lubrication regime. Mesh-converged simulations considering the topography of real measured surfaces were also run, and the validity of the lubrication approximation was assessed for such rough surfaces.

Constituição, dimensionamento e conservação de pavimentos para baixos volumes de tráfego

As Estradas de baixo volume de tráfego (EBVT) têm um importante papel para o desenvolvimento de um país porque representam uma extensão considerável da malha rodoviária existente, sendo de grande relevância social e económica. A função económica da infraestrutura rodoviária traduz-se, por um lado, pelo montante de recursos investidos na sua construção e manutenção e, por outro lado, pelo suporte que garantem à mobilidade de pessoas e bens. Os pavimentos daquelas infraestruturas são uma componente fundamental para o seu bom desempenho, o que explica a importância de empregar bons métodos de dimensionamento. Pavimentos rodoviários subdimensionados e com estratégias de conservação deficientes sofrerão rotura prematura, o que conduzirá a altos custos de reconstrução e grandes perdas económicas. Por sua vez, pavimentos sobredimensionados envolverão desperdício dos recursos, os quais poderiam ser utilizados para melhorar outras características igualmente relevantes para a infraestrutura. Verifica-se ainda que, nos últimos anos, as empresas construtoras portuguesas têm alargado a sua atividade para países africanos, nos quais as soluções de pavimentação utilizam solos naturais ou estabilizados nas camadas estruturais, e revestimentos betuminosos delgados colocados sobre aquelas, porquanto há escassez de materiais pétreos para uso rodoviário. Por isso, as técnicas de pavimentação utilizadas em Portugal e na Europa não são geralmente utilizadas nos países africanos. Essa realidade leva a que os técnicos portugueses ao serviço de empresas que atuam em mercados africanos necessitem de reunir informação sistematizada sobre o assunto, o que acarreta algumas dificuldades. É, assim, de todo o interesse reunir informação dispersa sobre os materiais a utilizar para as situações referidas, assim como avaliar as metodologias de dimensionamento que poderão utilizar-se, de modo a estabelecer estruturas de pavimentos e as características dos materiais que as constituem, de modo conseguir infraestruturas de transporte rodoviário que suportem a economia de um território. A par da conceção e do dimensionamento estão as estratégias e as técnicas de conservação das estruturas de pavimentos, de modo a contribuir para a durabilidade da infraestrutura e para o desenvolvimento da economia do território servido. Pelas razões aduzidas, na presente dissertação procurou-se reunir informação dispersa sobre os aspetos relevantes da constituição, conceção, dimensionamento e conservação de pavimentos de estruturas pouco espessas de pavimentos, destinados a tráfego de pesados pouco significativo no seu ciclo de vida, mas com picos de solicitação importantes. A sistematização e análise dos aspetos relevantes, e a aplicação a casos concretos, permitiu uma análise comparativa das soluções em confronto, quer no que diz respeito aos aspetos tecnológicos da construção e da conservação, quer no que se refere aos aspetos do dimensionamento deste tipo de pavimentos, constituindo uma contribuição útil para o setor.

Avaliação do desempenho a longo prazo de pavimentos flexivéis : exploração da base de dados LTPP americana

A implementação de programas de LTPP – Long-Term Pavement Performance (avaliação do desempenho de pavimentos a longo prazo), ao criar um registo histórico sobre as características e a evolução do estado dos pavimentos da rede, revela-se uma ferramenta de valor acrescido no auxílio à tomada de decisões, no âmbito da conservação e da reabilitação de pavimentos, por parte das administrações das infraestruturas rodoviárias. O LTPP americano, dentre os existentes no mundo, é o projeto pioneiro e um dos que tem a maior quantidade de informação armazenada. Por isso, foi o escolhido no âmbito desta dissertação para estudar a evolução do estado dos pavimentos em várias secções classificadas no programa como SPS-5, incluídas no estudo de reabilitação de pavimentos betuminosos. A avaliação efetuada considera cerca de 15 anos de registos de dados, na Califórnia, no Texas e no Mississippi. Após uma breve apresentação de vários projetos LTPP existentes no mundo, descreve-se o modo como são recolhidos e estruturados os dados no LTPP americano, referindo os módulos, as tabelas e os campos considerados para estudo que se faz nesta dissertação. Os estados americanos escolhidos apresentam características climáticas que não reproduzem de forma muito próxima o que acontece em Portugal. Mesmo assim, procurou estabelecer-se um paralelo entre aquelas zonas, com base na temperatura do ar e na precipitação, de modo a poder inferir, de forma aproximada, tendências de evolução do estado dos pavimentos para Portugal Continental. A correspondência climática entre os estados americanos e as regiões portuguesas, resultou nos pares Califórnia/Beja, Texas/Lisboa e Mississippi/Porto. No que se refere ao desenvolvimento de patologias nos pavimentos, analisou-se a evolução do fendilhamento longitudinal, transversal, em bloco (ou malha) e por fadiga (ou pele de crocodilo), da desagregação superficial, do Índice de Irregularidade Internacional (IRI) e das rodeiras. O fendilhamento em bloco (ou malha) e a desagregação superficial não foram objeto de estudos estatísticos para determinação de modelos de previsão. A evolução do estado dos pavimentos, traduzida por indicadores relacionados com as patologias analisadas, foi apreciada em função de diversas variáveis associadas às técnicas de reabilitação, tais como a preparação da superfície de trabalho (realização de atividades de fresagem antes da nova camada), a espessura da camada de reforço (50 ou 125 mm) e o tipo de mistura utilizada (nova ou contendo cerca de 30% de material reciclado). Para as situações em que os dados existentes eram coerentes e em quantidade suficiente, apresentam-se análises de regressão multivariada, de modo a prever a evolução no tempo do estado dos pavimentos, tendo em conta um conjunto de variáveis explicativas relacionadas com as técnicas de reabilitação aplicadas e com o tráfego que solicitou os pavimentos. A análise agregada dos dados para cada um dos estados permitiu concluir que a preparação da superfície por fresagem, o aumento da espessura do reforço, e a utilização de misturas betuminosas novas ou com material reciclado, interferem na evolução das degradações. A influência daqueles fatores é variável em função dos diferentes tipos de patologias em análise.

Análise de tensões integrada a sistema de engenharia reversa para projeto e confecção de próteses

This work consists of the conception, developing and implementation of a Computational Routine CAE which has algorithms suitable for the tension and deformation analysis. The system was integrated to an academic software named as OrtoCAD. The expansion algorithms for the interface CAE genereated by this work were developed in FORTRAN with the objective of increase the applications of two former works of PPGEM-UFRN: project and fabrication of a Electromechanincal reader and Software OrtoCAD. The software OrtoCAD is an interface that, orinally, includes the visualization of prothetic cartridges from the data obtained from a electromechanical reader (LEM). The LEM is basically a tridimensional scanner based on reverse engineering. First, the geometry of a residual limb (i.e., the remaining part of an amputee leg wherein the prothesis is fixed) is obtained from the data generated by LEM by the use of Reverse Engineering concepts. The proposed core FEA uses the Shell's Theory where a 2D surface is generated from a 3D piece form OrtoCAD. The shell's analysis program uses the well-known Finite Elements Method to describe the geometry and the behavior of the material. The program is based square-based Lagragean elements of nine nodes and displacement field of higher order to a better description of the tension field in the thickness. As a result, the new FEA routine provide excellent advantages by providing new features to OrtoCAD: independency of high cost commercial softwares; new routines were added to the OrtoCAD library for more realistic problems by using criteria of fault engineering of composites materials; enhanced the performance of the FEA analysis by using a specific grid element for a higher number of nodes; and finally, it has the advantage of open-source project and offering customized intrinsic versatility and wide possibilities of editing and/or optimization that may be necessary in the future

Análise da eficácia de um refrigerador doméstico com condensador modificado: revestimento com meio poroso dissipativo

The development of home refrigerators generally are compact and economic reasons for using simplified configuration. The thermodynamic coefficient of performance ( COP ) is limited mainly in the condenser design for reasons of size and arrangement ( layout ) of the project ( design ) and climatic characteristics of the region where it will operate. It is noteworthy that this latter limitation is very significant when it comes to a country of continental size like Brazil with diverse climatic conditions. The COP of the cycle depends crucially on the ability of heat dissipated in the condenser. So in hot climates like the northeast, north, and west-central dispel ability is highly attenuated compared to the south and southeast regions with tropical or subtropical climates when compared with other regions. The dissipation in compact capacitors for applications in domestic refrigeration has been the focus of several studies, that due to its impact on reducing costs and power consumption, and better use of the space occupied by the components of refrigeration systems. This space should be kept to a minimum to allow an increase in the useful storage volume of refrigerator without changing the external dimensions of the product. Due to its low cost manufacturing, wire on tube condensers continue to be the most advantageous option for domestic refrigeration. Traditionally, these heat exchangers are designed to operate under natural convection. Not always, the benefits of greater compactness of capacitors for forced outweigh the burden of pumping air through the external heat exchanger. In this work we propose an improvement in convective condenser changing it to a transfer mechanism combined in series with conductive pipes and wire to a moist convective porous medium and the porous medium to the environment. The porous media used in the coating was composed of a gypsum plaster impregnated fiber about a mesh of natural cellulosic molded tubular wire mesh about the original structure of the condenser , and then dried and calcined to greater adherence and increased porosity. The proposed configuration was installed in domestic refrigeration system ( trough ) and tested under the same conditions of the original configuration . Was also evaluated in the dry condition and humidified drip water under natural and forced with an electro - fan ( fan coil ) convection. Assays were performed for the same 134- refrigerant charge e under the same thermal cooling load. The performance was evaluated in various configurations, showing an improvement of about 72 % compared with the original configuration proposed in humidification and natural convection.

Síntese e imobilização de nanopartículas de ouro em fibras regeneradas via exaustão para potencial aplicação biomédica

The advancement of nanotechnology in the synthesis and characterisation of nanoparticles (NP's) has played an important role in the development of new technologies for various applications of nano-scale materials that have unique properties. The scientific development in the last decades in the field of nanotechnology has sought ceaselessly, the discovery of new materials for the most diverse applications, such as biomedical areas, chemical, optical, mechanical and textiles. The high bactericidal efficiency of metallic nanoparticles (Au and Ag), among other metals is well known, due to its ability to act in the DNA of fungi, viruses and bacteria, interrupting the process of cellular respiration, making them important means of study, in addition to its ability to protect UVA and UVB. The present work has as its main objective the implementation of an innovative method in the impregnation of nanoparticles of gold in textile substrate, functionalized with chitosan, by a dyeing process by exhaustion, with the control of temperature, time and velocity, thus obtaining microbial characteristics and UV protection. The exhausted substrates with colloidal solutions of NPAu's presented the colours, lilac and red (soybean knits) due to their surface plasmon peak around 520-540 nm. The NPAu's were synthesized chemically, using sodium citrate as a reducing agent and stabilizer. The material was previously cationised with chitosan, a natural polyelectrolyte, with the purpose of functionalising it to enhance the adsorption of colloid, at concentrations of 5, 7, 10 and 20 % of the bonding agent on the weight of the material (OWM). It was also observed, through an experimental design 23 , with 3 central points, which was the best process of exhaustion of the substrates, using the following factors: Time (min.), temperature (OC) and concentration of the colloid (%), having as a response to variable K/S (ABSORBÂNCIA/ Kubelka-Munk) of the fibres. Furthermore, it was evidenced as the best response, the following parameters: concentration 100%, temperature 70 ºC and time 30 minutes. The substrate with NPAu was characterised by XRD; thermal analysis using TGA; microstructural study using SEM/EDS and STEM, thus showing the NP on the surface of the substrate confirming the presence of the metal. The substrates showed higher washing fastness, antibacterial properties and UV radiation protection.

Desenvolvimento de um material têxtil termosenssível com micro/nanocápsulas imobilizadas em fibras regeneradas

Intelligent and functional Textile Materials have been widely developed and researched with the purpose of being used in several areas of science and technology. These fibrous materials require different chemical and physical properties to obtain a multifunctional material. With the advent of nanotechnology, the techniques developed, being used as essential tools to characterize these new materials qualitatively. Lately the application of micro and nanomaterials in textile substrates has been the objective of many studies, but many of these nanomaterials have not been optimized for their application, which has resulted in increased costs and environmental pollution, because there is still no satisfactory effluent treatment available for these nanomaterials. Soybean fiber has low adsorption for thermosensitive micro and nanocapsules due to their incompatibility of their surface charges. For this reason, in this work initially chitosan was synthesized to functionalise soybean fibres. Chitosan is a natural polyelectrolyte with a high density of positive charges, these fibres have negative charges as well as the micro/nanocápsules, for this reason the chitosan acts as auxiliary agent to cationize in order to fix the thermosensitive microcapsules in the textile substrate. Polyelectrolyte was characterized using particle size analyses and the measurement of zeta potential. For the morphological analysis scanning Electron Microscopy (SEM) and x-Ray Diffraction (XRD) and to study the thermal properties, thermogravimetric analysis (TGA), Differential Scanning Calorimetry (DSC), Near Infrared Spectroscopy analysis in the Region of the Fourier Transform Infrared (FTIR), colourimetry using UV-VIS spectrum were simultaneously performed on the substrate. From the measurement of zeta potential and in the determination of the particle size, stability of electrostatic chitosan was observed around 31.55mV and 291.0 nm respectively. The result obtained with (GD) for chitosan extracted from shrimp was 70 %, which according to the literature survey can be considered as chitosan. To optimize the dyeing process a statistical software, Design expert was used. The surface functionalisation of textile substrate with 2% chitosan showed the best result of K/S, being the parameter used for the experimental design, in which this showed the best response of dyeing absorbance in the range of 2.624. It was noted that soy knitting dyed with the thermosensitive micro andnanocapsules property showed excellent washing solidity, which was observed after 25 home washes, and significant K/S values.

Desempenho zootécnico dos camarões: Litopenaeus vannamei e Macrobrachium rosenbergii em tanques rede e aquicultura familiar na comunidade de Bebida-Velha, RN

The study aims to evaluate the performance and identify lesions of agonistic interactions of Macrobrachium rosenbergii in different densities cages (chapter 1); compare the growth performance of shrimp M. rosenbergii and Litopenaus vannamei cages (chatper 2); in addition the study aimed at identifying the knowledge and practices of a traditional community of farmers Bebida-Velha, in the city of Pureza / RN, practicing rural family and aquaculture, as well as tracing the community socioeconomic profile and evaluate the management that these farmers use in shrimp farming Macrobrachium rosenbergii (chapter 3). To perform the experiments (chapter 1 and 2) shrimp species L. vannamei and M. rosenbergii were weighed on a digital scale and transferred to cultures in cages. The cages had 1m³, with 5mm mesh between us and were closed on top with screen to avoid predators (birds, insects). The animals remained in adaptation for fifteen days before the start of data collection (each experiment). Both experiments lasted seventy days, totaling eighty-five days cultivation. During the cultures, animals were fed pelleted feed for shrimp at 10% of their biomass with 35% crude protein, offered in feed trays twice a day during the hours (7:00 am and 14:00 pm). The remnants in the tray were removed after 2h of permanence to calculate intake. To determine the performance parameters, some samples were taken every 10 days. The results of both experiments were analyzed using the STATISTIC 7.0 (2004). In Chapter 1 experiment were applied5 treatments were applied with 5 replications each: D5 - 5 animals/m2 ; D10 - 10 animals/m2 ; D15 - 15 animals/m2 ; D20 - 20 animals/m2 ; D25 - 25 animals/m2 . To this, were distributed 25 cages randomly in two masonry nurseries. The end of the experiment the lesions were verified and quantified. The chapter 2 experiment began when the shrimp reached the same age (eighty-four days) and was used the density of 25 shrimp / m2 with 4 repetitions. For the realization of chapter 3 were applied semi-structured interviews by direct approach of Bebida Velha of settlers practicing aquaculture activity, tilapia producers and community shrimp. Data were tabulated and analyzed according to the responses obtained by the participants. Therefore, the amount of damage increased with increasing stocking density. The density of 10 freshwater shrimp/m² showed the best conditions for a better performance in cages. It can be concluded that in cages, the cultivation of species of fresh water shrimp M. rosenbergii had better zootechnical indexes than the cultivation of marine shrimp species L. 9 vannamei. It was possible to verify that the activities of which the interviewees practice guarantee a good quality of life and income for them. We find that respondents have traditional and local knowledge, and also may be interested in the cultivation of the species M. rosenbergii.

Posicionamento estratégico de destinos: uma análise através da percepção dos operadores de Turismo da cidade de São Paulo sobre o destino Natal, Brasil

El turismo constituye una actividad propulsora de mejorías económicas y sociales en incontables lugares alrededor del mundo, y la ciudad de Natal se posiciona como uno de los principales destinos turísticos del Nordeste brasileño. De ese modo, el objetivo del presente estudio consistió en analizar el posicionamiento estratégico del destino Natal por medio de la percepción de los operadores de turismo de la ciudad de São Paulo, principal mercado emisor de turistas del país. El estudio de carácter descriptivo-exploratorio utilizó un abordaje cualitativo y tuvo, como universo de investigación, operadoras de turismo de la capital paulista que comercializan el destino Natal. En la colecta de datos, se utilizaron la investigación bibliográfica y el estudio de campo, siendo este último efetivado por medio de un guión de entrevista semiestruturado. Ya la técnica utilizada para el análisis de los datos fue el análisis de contenido, iniciada mediante selección del material recolectado y concluida con el proceso de categorización. Cuanto a los resultados del estudio, se percibió que el paulistano que viaja al destino Natal tiene un perfil demográfico que sugiere a la práctica del turismo sustentable, está a la busca del turismo de sol y playa, y valora las bellezas naturales del lugar. Los operadores de turismo entrevistados evaluaron, positivamente, la ciudad de Natal, y destacaron los siguientes atributos del destino: playas, bellezas naturales, hostelería, receptividad de los autóctonas, gastronomía, de entre otros. Además, los respondentes demostraron tener un fuerte encariño al destino. En lo que se refiere a los aspectos negativos, prevaleció la observancia de la ineficacia de los gobiernos locales, donde el deterioro de la malla aérea y la incipiente promoción del destino fueron apuntados como los dos principales gargalos. Al analizar la competencia, se identificó que Fortaleza, Porto de Galinhas y Maceió son los tres principales concurrentes de Natal, siendo el destino pernambucano lo que presenta mejor evaluación. Por fin, se observó que no existe una diferenciación relevante en el destino Natal.

Uma reflexão sobre a vitalidade urbana das praças de Natal/RN

Squares are urban public open spaces whose use combines a number of elements that can provide their vitality, some of which can be enhanced through strategic projects. Given this general framework, the starting question which triggered this thesis: Would the elements that the literature indicate influence the vitality of the squares be perceived by their users? The hypothesis put forward was that users give priority to elements directly involved in the appropriation of space, especially the furniture and existing equipment, levels of shade and security. The focus of empirical research were public squares located in the city of Natal-RN, with the aim to identify elements that contribute to the vitality of the public squares in the city, through the relationship between spatial morphology and environmental awareness. The methodology adopted was a Case Study conducted by multimethod, using the following procedures: morphological analysis based on literature and information at three levels (radius of influence, 500m; immediate surroundings; environment itself); systematic observation (behavioral mapping centred in the location); and semi-structured interviews with users. The results showed that the public spaces more integrated in the urban areas have greater potential for use, however, its effective use depends on the perception of individuals, so that its vitality is mainly due to items identified by users as central to their continued presence in the environment because they directly affect their wellbeing and the image of the location. So some elements, notably furniture and urban equipment, are more easily detected than others, revealing that they are essential to the perception of users, so that their presence, quality and location appeared to have greater impact on use. In addition, the amount of shade and security showed as items that ensure that individuals experience public spaces more often, since the (likely) users are aware of the conservation actions or abandonment that take place on these sites, revealing itself to be potentially involved in the rescue of these spaces. Overall, the general hypothesis is only partially proven because in many situations, the vitality of squares appeared not only to be related to the elements investigated, but also additional aspects - environmental, nature, economic, social and cultural - which should also be studied.

Ferramenta para avaliação e inferência de parâmetros de redes industriais sem fio

Wireless sensor networks (WSN) have gained ground in the industrial environment, due to the possibility of connecting points of information that were inaccessible to wired networks. However, there are several challenges in the implementation and acceptance of this technology in the industrial environment, one of them the guaranteed availability of information, which can be influenced by various parameters, such as path stability and power consumption of the field device. As such, in this work was developed a tool to evaluate and infer parameters of wireless industrial networks based on the WirelessHART and ISA 100.11a protocols. The tool allows quantitative evaluation, qualitative evaluation and evaluation by inference during a given time of the operating network. The quantitative and qualitative evaluation are based on own definitions of parameters, such as the parameter of stability, or based on descriptive statistics, such as mean, standard deviation and box plots. In the evaluation by inference uses the intelligent technique artificial neural networks to infer some network parameters such as battery life. Finally, it displays the results of use the tool in different scenarios networks, as topologies star and mesh, in order to attest to the importance of tool in evaluation of the behavior of these networks, but also support possible changes or maintenance of the system.

Vulnerabilidade socioambiental no bairro de Mãe Luíza, Natal – RN/Brasil

This work has as object the elaboration of social environmental indicator of disaster risk that are present in precarious areas of human occupation, related to intense environmental dynamic from the perspective of the studies about the subject in Geography. The District of Mãe Luiza in Natal, capital city of Rio Grande do Norte, was defined as the study area. The place was chosen because it presents –historically- several vulnerability conditions and exposure to disaster risk. After a local social environmental description, two indexes were elaborated: the Social Vulnerability Index (SVI or IVS in Portuguese), based on 17 (seventeen) variables arranged on a questionnaire addressed to the population nucleus of the district, on regular grid (systematic sampling), classified into 5 (five) levels of SV from the weighted average; and the Physical and Natural Exposure to the Mass Movements Index (EMMI or IEMM in Portuguese) which had 16 (sixteen) variables that feature conditions of exposure to the mass movements in the district with classified levels from the weighted average of 1 (one) to 5 (five). The relationship between these two results, specialized in the district map, produced the Social Environmental Vulnerability Index (SEVI or IVSA in Portuguese) of Mãe Luiza, also classified into 5 (five) levels, following the Boolean logic correlation for cartographic overlay with use of computer software ArcGIS v.9.3, being named as: Very Low; low; average; high; and Very High Environmental Vulnerability in District. The study is based on the methodology proposed by Guerra et al (2009) for EMMI and by Almeida (2010) for SVI. They were modified and adapted according to the local reality, producing a new methodology in this study area. It was concluded that the neighborhood has most of its area with High and Very High Socio-environmental vulnerability to disasters, defined seven (7) critical areas, with Very High IVSA, and hazards associated with mass movements or flooding. In the end, the main issues that were found, such as generating elements for proposing mitigation measures and/or the proposed interventions were enumerated, related to structural order of vulnerability factors: how low constructive pattern of households; poor urban drainage; Real Estate forsaken in landslide routes; infrastructure ready access roads and slope containment. And social: as a lack of education about environmental risk; income and education of residents; presence of persons with limited mobility and/or those with special needs. This reality highlights the need for urgent action applied to the resolution and/or reduction of these problems, which is focusing the end of this work.

Desenvolvimento da célula base de microestruturas periódicas de compósitos sob otimização topológica

This thesis develops a new technique for composite microstructures projects by the Topology Optimization process, in order to maximize rigidity, making use of Deformation Energy Method and using a refining scheme h-adaptative to obtain a better defining the topological contours of the microstructure. This is done by distributing materials optimally in a region of pre-established project named as Cell Base. In this paper, the Finite Element Method is used to describe the field and for government equation solution. The mesh is refined iteratively refining so that the Finite Element Mesh is made on all the elements which represent solid materials, and all empty elements containing at least one node in a solid material region. The Finite Element Method chosen for the model is the linear triangular three nodes. As for the resolution of the nonlinear programming problem with constraints we were used Augmented Lagrangian method, and a minimization algorithm based on the direction of the Quasi-Newton type and Armijo-Wolfe conditions assisting in the lowering process. The Cell Base that represents the composite is found from the equivalence between a fictional material and a preescribe material, distributed optimally in the project area. The use of the strain energy method is justified for providing a lower computational cost due to a simpler formulation than traditional homogenization method. The results are presented prescription with change, in displacement with change, in volume restriction and from various initial values of relative densities.

Estudo da absorção das espécies pesadas do gás natural em octanol: efeitos da temperatura e vazão

In the oil industry, natural gas is a vital component of the world energy supply and an important source of hydrocarbons. It is one of the cleanest, safest and most relevant of all energy sources, and helps to meet the world's growing demand for clean energy in the future. With the growing share of natural gas in the Brazil energy matrix, the main purpose of its use has been the supply of electricity by thermal power generation. In the current production process, as in a Natural Gas Processing Unit (NGPU), natural gas undergoes various separation units aimed at producing liquefied natural gas and fuel gas. The latter should be specified to meet the thermal machines specifications. In the case of remote wells, the process of absorption of heavy components aims the match of fuel gas application and thereby is an alternative to increase the energy matrix. Currently, due to the high demand for this raw gas, research and development techniques aimed at adjusting natural gas are studied. Conventional methods employed today, such as physical absorption, show good results. The objective of this dissertation is to evaluate the removal of heavy components of natural gas by absorption. In this research it was used as the absorbent octyl alcohol (1-octanol). The influence of temperature (5 and 40 °C) and flowrate (25 and 50 ml/min) on the absorption process was studied. Absorption capacity expressed by the amount absorbed and kinetic parameters, expressed by the mass transfer coefficient, were evaluated. As expected from the literature, it was observed that the absorption of heavy hydrocarbon fraction is favored by lowering the temperature. Moreover, both temperature and flowrate favors mass transfer (kinetic effect). The absorption kinetics for removal of heavy components was monitored by chromatographic analysis and the experimental results demonstrated a high percentage of recovery of heavy components. Furthermore, it was observed that the use of octyl alcohol as absorbent was feasible for the requested separation process.