Single side damage simulations and detection in beam-like structures

Beam-like structures are the most common components in real engineering, while single side damage is often encountered. In this study, a numerical analysis of single side damage in a free-free beam is analysed with three different finite element models; namely solid, shell and beam models for demonstrating their performance in simulating real structures. Similar to experiment, damage is introduced into one side of the beam, and natural frequencies are extracted from the simulations and compared with experimental and analytical results. Mode shapes are also analysed with modal assurance criterion. The results from simulations reveal a good performance of the three models in extracting natural frequencies, and solid model performs better than shell while shell model performs better than beam model under intact state. For damaged states, the natural frequencies captured from solid model show more sensitivity to damage severity than shell model and shell model performs similar to the beam model in distinguishing damage. The main contribution of this paper is to perform a comparison between three finite element models and experimental data as well as analytical solutions. The finite element results show a relatively well performance.

Iberian peninsula ecosystem carbon fluxes: a model-data integration study

Dissertação apresentada para obtenção do Grau de Doutor em Engenharia do Ambiente pela Universidade Nova de Lisboa,Faculdade de Ciências e Tecnologia

The ABC model for telework in Portugal

The principal aim of this paper is to develop a simple and objective model which can classify an systematise telework, and provide a standard for Portugal. This model defines special concepts of telework and allows the division of the activity in this area, making its application easier. The model was constructed on the basis of four perspectives which it has to cover: the economic and social, of the employers, of the teleworkers and the suppliers of goods and services.

New strategies to detect and understand genotype-by-environment interactions and QTL-by-environment interactions

Dissertação para obtenção do Grau de Doutor em Estatística e Gestão do Risco, especialidade em Estatística

Stochastic simulation of the morphology of fluvial sand channels reservoirs

Dissertação para obtenção do Grau de Mestre em Engenharia Geológica (Georrecursos)

HCV INFECTION THROUGH PERFORATING AND CUTTING MATERIAL AMONG CANDIDATES FOR BLOOD DONATION IN BELÉM, BRAZILIAN AMAZON

This study evaluated epidemiological factors for HCV infection associated with sharing perforating and cutting instruments among candidates for blood donation (CBD) in the city of Belém, Pará, Brazilian Amazon. Two definitions of HCV infection cases were used: anti-HCV positivity shown by EIA, and HCV-RNA detection by PCR. Infected and uninfected CBD completed a questionnaire about possible risk factors associated with sharing perforating and cutting instruments. The information was evaluated using simple and multiple logistic regressions. Between May and November 2010, 146 (1.1%) persons with anti-HCV antibodies and 106 (0.8%) with HCV-RNA were detected among 13,772 CBD in Belém. Risk factors associated with HCV infection based on the EIA (model 1) and PCR (model 2) results were: use of needles and syringes sterilized at home; shared use of razors at home, sharing of disposable razors in barbershops, beauty salons etc.; and sharing manicure and pedicure material. The models of HCV infection associated with sharing perforating and cutting instruments should be taken into account by local and regional health authorities and by those of other countries with similar cultural practices, in order to provide useful information to guide political and public strategies to control HCV transmission.

Rickettsia typhi IN RODENTS AND R. felis IN FLEAS IN YUCATÁN AS A POSSIBLE CAUSAL AGENT OF UNDEFINED FEBRILE CASES

Rickettsia typhi is the causal agent of murine typhus; a worldwide zoonotic and vector-borne infectious disease, commonly associated with the presence of domestic and wild rodents. Human cases of murine typhus in the state of Yucatán are frequent. However, there is no evidence of the presence of Rickettsia typhi in mammals or vectors in Yucatán. The presence of Rickettsia in rodents and their ectoparasites was evaluated in a small municipality of Yucatán using the conventional polymerase chain reaction technique and sequencing. The study only identified the presence of Rickettsia typhi in blood samples obtained from Rattus rattus and it reported, for the first time, the presence of R. felis in the flea Polygenis odiosus collected from Ototylomys phyllotis rodent. Additionally, Rickettsia felis was detected in the ectoparasite Ctenocephalides felis fleas parasitizing the wild rodent Peromyscus yucatanicus. This study’s results contributed to a better knowledge of Rickettsia epidemiology in Yucatán.

Urban land use and land cover change analysis and modeling a case study area Malatya, Turkey

Dissertation submitted in partial fulfillment of the requirements for the Degree of Master of Science in Geospatial Technologies.

An internal analysis of Amorim Turismo’s operations regarding food and beverage with a focus on operational efficiency and quality of service

A Work Project, presented as part of the requirements for the Award of a Masters Degree in Management from the NOVA – School of Business and Economics

Strategy definition of a new business opportunity in mobile-casual gaming: Partnership between Nmusic and Rovio Entertainment Ltd.

A Work Project, presented as part of the requirements for the Award of a Masters Degree in Management from the NOVA – School of Business and Economics

Synanthropic triatomines (Hemiptera, Reduviidae) in the state of Pernambuco, Brazil: geographical distribution and natural Trypanosoma infection rates between 2006 and 2007

INTRODUCTION: The present study shows a descriptive analysis of triatomine occurrence and its natural Trypanosoma infection rates in the state of Pernambuco, Brazil, between 2006 and 2007. METHODS: Entomological data for the species, such as specimens captured in both intra and peridomiciles and natural infection index, were obtained via domiciliary capture in 147 municipalities from 11 Regional Managements of Health. The database was obtained from a sample of insects (100% infected and 20% non-infected) sent to the Central Laboratory of Pernambuco. RESULTS: A total of 18,029 triatomines were analyzed from 138 municipalities of the state. Triatoma pseudomaculata (35%), Triatoma brasiliensis (34%), and Panstrongylus lutzi (25%) were the most captured species. These species also showed a widespread geographical distribution in the state. Panstrongylus megistus, Triatoma petrocchiae, Triatoma melanocephala, Triatoma sordida, Rhodnius nasutus, Rhodnius neglectus, and Triatoma infestans showed more limited geographical distribution and lower relative abundance. The parasitological research showed that 8.8% of the triatomines were naturally infected with flagellates morphologically similar to Trypanosoma cruzi and 91.3% of them were captured inside houses in 113 municipalities. P. lutzi showed the highest rates of natural infection. CONCLUSIONS: After the control of T. infestans, synanthropic species, such as T. brasiliensis, T. pseudomaculata, and P. lutzi, maintain the risk of T. cruzi transmission to humans in the state of Pernambuco. These species are widely distributed, and infected specimens have been found inside houses. Thus, an enhanced surveillance and vector control of Chagas disease is recommended in Pernambuco.

Incremental compilation and deployment for OutSystems Platform

OutSystems Platform is used to develop, deploy, and maintain enterprise web an mobile web applications. Applications are developed through a visual domain specific language, in an integrated development environment, and compiled to a standard stack of web technologies. In the platform’s core, there is a compiler and a deployment service that transform the visual model into a running web application. As applications grow, compilation and deployment times increase as well, impacting the developer’s productivity. In the previous model, a full application was the only compilation and deployment unit. When the developer published an application, even if he only changed a very small aspect of it, the application would be fully compiled and deployed. Our goal is to reduce compilation and deployment times for the most common use case, in which the developer performs small changes to an application before compiling and deploying it. We modified the OutSystems Platform to support a new incremental compilation and deployment model that reuses previous computations as much as possible in order to improve performance. In our approach, the full application is broken down into smaller compilation and deployment units, increasing what can be cached and reused. We also observed that this finer model would benefit from a parallel execution model. Hereby, we created a task driven Scheduler that executes compilation and deployment tasks in parallel. Our benchmarks show a substantial improvement of the compilation and deployment process times for the aforementioned development scenario.

Market risk charge of the trading book: a comparison of the Basel II and Basel III

This paper aims to investigate if the market capital charge of the trading book increased in Basel III compared to Basel II. I showed that the capital charge rises by 232% and 182% under the standardized and internal model, respectively. The varying liquidity horizons, the calibration to a stress period, the introduction of credit spread risk, the restrictions on correlations across risk categories and the incremental default charge boost Basel III requirements. Nevertheless, the impact of Expected shortfall at 97.5% is low and long term shocks decrease the charge. The standardized approach presents advantages and disadvantages relative to internal models.

Dengue in Brazil and Colombia: a study of knowledge, attitudes, and practices

Introduction This study was conducted in Brazil and Colombia,where dengue is endemic and vector control programs use chemical insecticides. Methods We identified knowledge, attitudes, and practices about dengue and determined the infestation levels of Aedes aegypti in one Brazilian and four Colombian communities. Results The surveys show knowledge of the vector, but little knowledge about diagnosis, prognosis, and treatment. Vector infestation indices show Brazil to have good relative control, while Colombia presents a high transmission risk. Conclusions Given the multidimensionality of dengue control, vertical control strategies are inadequate because they deny contextualized methods, alternative solutions, and local empowerment.

Electro-Optical/Infrared sensor turret integration on an aircraft - structural im-pact on LOCKHEED MARTIN C-130H and design methodology

The growing need to patrol and survey large maritime and terrestrial areas increased the need to integrate external sensors on aircraft in order to accomplish those patrols at increasingly higher altitudes, longer range and not depending upon vehicle type. The main focus of this work is to elaborate a practical, simple, effective and efficient methodology for the aircraft modification procedure resulting from the integration of an Elec-tro-Optical/Infra-Red (EO/IR) turret through a support structure. The importance of the devel-opment of a good methodology relies on the correct management of project variables as time, available resources and project complexity. The key is to deliver a proper tool for a project de-sign team that will be used to create a solution that fulfils all technical, non-technical and certi-fication requirements present in this field of transportation. The created methodology is inde-pendent of two main inputs: sensor model and aircraft model definition, and therefore it is in-tended to deliver the results for different projects besides the one that was presented in this work as a case study. This particular case study presents the development of a structure support for FLIR STAR SAPHIRE III turret integration on the front lower fuselage bulkhead (radome) of the LOCKHEED MARTIN C-130 H. Development of the case study focuses on the study of local structural analysis through the use of Finite Element Method (FEM). Development of this Dissertation resulted in a cooperation between Faculty of Science and Technology - Universidade Nova de Lisboa and the company OGMA - Indústria Aeronáutica de Portugal