A review on the production of levulinic acid and furanics from sugars

Sugarcane products represent an abundant and relatively low cost carbon resource that can be utilised to produce chemical intermediates such as levulinic acid and furanics. These chemicals can be easily upgraded to commodity and specialty chemicals and biofuels by high yielding and well established technologies. However, there are challenges and technical hurdles that need to be overcome before these chemical intermediates can be cost-effectively produced in commercial quantities. The paper reviews production of levulinic acid and furanics from sugars by homogeneous mineral acid catalysts, and reports on preliminary studies on the production of these compounds with environmentally friendly biodegradable sulfonic acids. The yields (>50% of theoretical) of levulinic acid, formic acid and furfural obtained with these organic acids are comparable to that of sulphuric acid currently used for their production.

Innovating urban policymaking and planning mechanisms to deliver knowledge-based agendas : a methodological approach

This paper aims to develop a comprehensive approach to innovate urban policymaking and planning to successfully deliver the knowledge-based agenda. The paper, first, examines the concept of knowledge-based urban development, which has become a popular urban development policy and strategy in recent years, through a comprehensive review of the literature. It, then, introduces and discusses a novel methodological approach for effective policymaking and planning mechanism to deliver the knowledge-based agenda of cities. The paper, with the proposed methodology, brings together urban policymaking and planning approaches, and introduces a novel way to assess knowledge-based urban development achievements and potentials of emerging and prosperous knowledge cities. The paper, thus, provides an invaluable instrument to inform local and regional decision and plan making mechanisms to deliver their knowledge-based agendas and help them in moving towards building their sustainable knowledge cities.

Unconventional Ni–P alloy-catalyzed CVD of carbon coil-like micro- and nano-structures

Conventional catalyzed thermal CVD of carbon microcoils commonly suffers from poor control of the coil shape and morphology and rarely reaches the nanoscale size range. This article reports on an unconventional Ni-P alloy-catalyzed, high-throughput, highly reproducible CVD of ultra-long carbon coil-like micro- and nano-structures using acetylene precursor at relatively low process temperatures. Helical carbon microcoils with consistently uniform, circular cross-sections and a high degree of crystallinity have been synthesized at 750 °C. A further reduction of the temperature to 650 °C led to the growth of ultra-long (up to several mm) wave-like carbon nanofibers made of two nanowires with the diameters in the 100-200 nm range. The results of the XRD and Raman analysis reveal that the nanofibers feature only a slightly more disordered structure compared to the microcoils. Our results suggest that morphology and structure of the carbon coil-like micro- and nano-structures can be tailored by the appropriate alloying of the catalyst and the choice of the CVD process parameters.

Critical literacy and social justice

Given the global escalation of gaps between rich and poor, contemporary work in critical literacy needs to overtly question the politics of poverty. How and where is poverty produced, by what means, by whom and for whom and how are educational systems stratified to provide different kinds of education to the rich and the poor? Yet rather than critical literacy, international educational reform movements stress performative standards on basic literacy. In this context literacy researchers need to ask policy-makers hard questions about taken-for-granted rhetoric that surrounds poverty, literacy and education. At school, regional and state levels, educational leaders need to argue for fair resourcing and decision-making for their communities and students. In classrooms teachers need to weave critical questioning and inclusive learning interactions into the fabric of everyday life.

Literacy, poverty and schooling : what matters in young people's education?

This paper draws upon several decades of literacy research in schools in high poverty environments to explore what matters in young people’s education. In dialogue with themes from Kevin Marjoribanks’ work, such as student aspirations, family environments, and teacher expectations, key insights are summarised. Referring to longitudinal case studies and a current ethnographic project, the interplay between literacy, poverty and schooling, and, young people’s aspirations and education outcomes is explored. While the work of educators in high poverty communities continues to be highly demanding, there are some schools and teachers making a durable positive difference to learner dispositions and literate repertoires. Teacher expectations and discursive practices are crucial in this process.

Poly(2,5-bis(2-octyldodecyl)-3,6-di(furan-2-yl)-2,5-dihydro-pyrrolo[3,4-c] pyrrole-1,4-dione-co-thieno[3,2-b]thiophene): A high performance polymer semiconductor for both organic thin film transistors and organic photovoltaics

A new diketopyrrolopyrrole (DPP)-containing donor-acceptor polymer, poly(2,5-bis(2-octyldodecyl)-3,6-di(furan-2-yl)-2,5-dihydro-pyrrolo[3,4-c] pyrrole-1,4-dione-co-thieno[3,2-b]thiophene) (PDBF-co-TT), is synthesized and studied as a semiconductor in organic thin film transistors (OTFTs) and organic photovoltaics (OPVs). High hole mobility of up to 0.53 cm 2 V -1 s -1 in bottom-gate, top-contact OTFT devices is achieved owing to the ordered polymer chain packing and favoured chain orientation, strong intermolecular interactions, as well as uniform film morphology of PDBF-co-TT. The optimum band gap of 1.39 eV and high hole mobility make this polymer a promising donor semiconductor for the solar cell application. When paired with a fullerene acceptor, PC 71BM, the resulting OPV devices show a high power conversion efficiency of up to 4.38% under simulated standard AM1.5 solar illumination.

Synthesis of diketopyrrolopyrrole based copolymers via the direct arylation method for p-channel and ambipolar OFETs

In this paper, we have synthesized two novel diketopyrrolopyrrole (DPP) based donor-acceptor (D-A) copolymers poly{3,6-dithiophene-2-yl-2,5-di(2-octyl)- pyrrolo[3,4-c]pyrrole-1,4-dione-alt-1,5-bis(dodecyloxy)naphthalene} (PDPPT-NAP) and poly{3,6-dithiophene-2-yl-2,5-di(2-butyldecyl)-pyrrolo[3,4-c]pyrrole-1,4- dione-alt-2-dodecyl-2H-benzo[d][1,2,3]triazole} (PDPPT-BTRZ) via direct arylation organometallic coupling. Both copolymers contain a common electron withdrawing DPP building block which is combined with electron donating alkoxy naphthalene and electron withdrawing alkyl-triazole comonomers. The number average molecular weight (Mn) determined by gel permeation chromatography (GPC) for polymer PDPPT-NAP is around 23 400 g mol-1 whereas for polymer PDPPT-BTRZ it is 18 600 g mol-1. The solid state absorption spectra of these copolymers show a wide range of absorption from 400 nm to 1000 nm with optical band gaps calculated from absorption cut off values in the range of 1.45-1.30 eV. The HOMO values determined for PDPPT-NAP and PDPPT-BTRZ copolymers from photoelectron spectroscopy in air (PESA) data are 5.15 eV and 5.25 eV respectively. These polymers exhibit promising p-channel and ambipolar behaviour when used as an active layer in organic thin-film transistor (OTFT) devices. The highest hole mobility measured for polymer PDPPT-NAP is around 0.0046 cm2 V-1 s-1 whereas the best ambipolar performance was calculated for PDPPT-BTRZ with a hole and electron mobility of 0.01 cm2 V-1 s-1 and 0.006 cm2 V-1 s-1.

Small firms and health and safety harmonisation : potential regulatory effects of a dominant narrative

Small firms are popularly viewed as resistant to complying with regulation. Harmonisation of Australia’s state-based work health and safety regimes is a significant regulatory change. In this article, we consider the likely responses of small firms to work health and safety harmonisation and argue that a range of choices are open to small firm owner-managers. These choices are shaped by individuals’ world views and are influenced by elements in the firms’ context. A significant element is the public narrative of work health and safety harmonisation, which can be understood by using discourse and sense-making concepts. Our analysis of small firm owner-manager choices takes into account small firms’ embeddedness in their regulatory context and the influence on organisational decision-making of the narrative of work health and safety harmonisation. The dominant narrative is arguably silent on the benefits of the work health and safety regulatory change and therefore the response of small firms is likely to be avoidance or minimalism. Non-compliance could be the result due to poor awareness of opportunities arising from this regulatory change.

Phonon modes of MgB2 : Super-lattice structures and spectral response

Micrometre-sized MgB2 crystals of varying quality, synthesized at low temperature and autogeneous pressure, are compared using a combination of Raman and Infra-Red (IR) spectroscopy. These data, which include new peak positions in both spectroscopies for high quality MgB2, are interpreted using DFT calculations on phonon behaviour for symmetry-related structures. Raman and IR activity additional to that predicted by point group analyses of the P6/mmm symmetry are detected. These additional peaks, as well as the overall shapes of calculated phonon dispersion (PD) models are explained by assuming a double super-lattice, consistent with a lower symmetry structure for MgB2. A 2x super-lattice in the c-direction allows a simple correlation of the pair breaking energy and the superconducting gap by activation of corresponding acoustic frequencies. A consistent physical interpretation of these spectra is obtained when the position of a phonon anomaly defines a super-lattice modulation in the a-b plane.

Keeping our nursing and midwifery workforce : factors that support non-practising clinicians to return to practice

BACKGROUND: Within Australia and internationally (Health Workforce Australia, 2012) an increasing and on-going nursing workforce shortage is documented. Recent international estimates indicate that there will be ongoing and significant gaps in the supply of a nursing workforce; the United Kingdom is predicted to have a reduction of 12.12% nurses over the coming eight years if a current 'steady state' is maintained (Buchan and Seacombe, 2011); Canada is predicted to have a shortage of 60,000 nurses by 2022 (Tomblin et al., 2012) with Australia's anticipated nursing shortage reported as over 90,000 by the year 2025 (Health Workforce Australia, 2012). Queensland Health in response to their tracked emerging nursing and midwifery workforce shortages developed a nursing and midwifery refresher programme to return registered staff back to the workforce. A study was undertaken between 2008 and 2010 to provide an understanding of how non-practising nurses and midwives maybe supported back into the workforce. METHODS: Programme applicants (444) were invited to respond to an on-line survey designed to understand what aspects of the programme supported their learning and ability to return to the workforce. This number represents those who applied but not all completed or commenced the programme. Descriptive statistics (Polit and Beck, 2008) were used to collate quantifiable survey responses and free text and unsolicited responses were themed. RESULTS: The survey received a 35.5% response rate (n=158) with a return of 20% of unsolicited comments in the form of e-mail responses which were included in the themed results. Key themes supporting participants' learning and ability to return to the workforce were: Respondents were 94% female and 6% male, with 37.7% >51 years of age. Child rearing was the foremost reason for female staff relinquishing workforce roles (36.6%). The primary reason for returning to the workforce was maintenance of registration (40.5%). Both theory and clinical placement components were seen by participants as contributing to their confidence to return to the health workforce. CONCLUSION: The Queensland Nursing and Midwifery Refresher Programs provided a structured programme for registered, non-practising nurses and midwives to return to the Queensland Health workforce. Responses indicated that clinical supervision and contract learning should be central to a return to workforce induction programme for registered but non-practising nurses and midwives. The majority of nurses and midwives returning to the workforce were approaching retirement age in 10-15 years.

Diagnostic potential of saliva : current state and future applications

BACKGROUND: Over the past 10 years, the use of saliva as a diagnostic fluid has gained attention and has become a translational research success story. Some of the current nanotechnologies have been demonstrated to have the analytical sensitivity required for the use of saliva as a diagnostic medium to detect and predict disease progression. However, these technologies have not yet been integrated into current clinical practice and work flow. CONTENT: As a diagnostic fluid, saliva offers advantages over serum because it can be collected noninvasively by individuals with modest training, and it offers a cost-effective approach for the screening of large populations. Gland-specific saliva can also be used for diagnosis of pathology specific to one of the major salivary glands. There is minimal risk of contracting infections during saliva collection, and saliva can be used in clinically challenging situations, such as obtaining samples from children or handicapped or anxious patients, in whom blood sampling could be a difficult act to perform. In this review we highlight the production of and secretion of saliva, the salivary proteome, transportation of biomolecules from blood capillaries to salivary glands, and the diagnostic potential of saliva for use in detection of cardiovascular disease and oral and breast cancers. We also highlight the barriers to application of saliva testing and its advancement in clinical settings. SUMMARY: Saliva has the potential to become a first-line diagnostic sample of choice owing to the advancements in detection technologies coupled with combinations of biomolecules with clinical relevance. (C) 2011 American Association for Clinical Chemistry