Preparation of Hollow Carbon and Silicon Carbide Fibers with Different Cross-Sections by using Electrospun Fibers as Templates

Hollow carbon nanofibers with circular and rectangular opening were prepared by using electrospun silica fibers as templates. Silica fibers were synthesized by electrospinning, and they were coated with a carbon layer formed by thermal decomposition and carbonization of polystyrene under a nitrogen atmosphere. Hollow carbon nanofibers with circular and rectangular openings were then obtained after the silica core was etched by hydrofluoric acid. The carbon nanofibers with different morphologies also could be used as templates to fabricate silicon carbide fibers. The silicon carbide fibers with circular and rectangular openings could be obtained by using hollow carbon nanofibers and carbon belts as templates, respectively.

The nanocomposite scaffold of poly(lactide-co-glycolide) and hydroxyapatite surface-grafted with L-lactic acid oligomer for bone repair

Nanohydroxyapatite (op-HA) surface-modified with L-lactic acid oligomer (LAc oligomer) was prepared by LAc oligomer grafted onto the hydroxyapatite (HA) surface. The nanocomposite of op-HA/PLGA with different op-HA contents of 5, 10, 20 and 40 wt.% in the composite was fabricated into three-dimensional scaffolds by the melt-molding and particulate leaching methods. PLGA and the nanocomposite of HA/PLGA with 10 wt.% of ungrafted hydroxyapatite were used as the controls. The scaffolds were highly porous with evenly distributed and interconnected pore structures, and the porosity was around 90%. Besides the macropores of 100-300 mu m created by the leaching of NaCl particles, the micropores (1-50 mu m) in the pore walls increased with increasing content of op-HA in the composites of op-HA/PLGA. The op-HA particles could disperse more uniformly than those of pure HA in PLGA matrix. The 20 wt.% op-HA/PLGA sample exhibited the maximum mechanical strength, including bending strength (4.14 MPa) and compressive strength (2.31 MPa). The cell viability and the areas of the attached osteoblasts on the films of 10 wt.% op-HA/PLGA and 20 wt.% op-HA/PLGA were evidently higher than those on the other composites.

Monte Carlo simulation on symmetric ABA/AB copolymer blends in confined thin films

The effects of blend composition on morphology, order-disorder transition (ODT), and chain conformation of symmetric ABA/AB copolymer blends confined between two neutral hard walls have been investigated by lattice Monte Carlo simulation. Only lamellar structure is observed in all the simulation morphologies under thermodynamic equilibrium state, which is supported by theoretical prediction. When the composition of AB diblock copolymer (phi) increases, both lamellar spacing and the corresponding ODT temperature increase, which can be attributed to the variation of conformation distribution of the diblock and the triblock copolymer chains. In addition, both diblock and triblock copolymer, chains with bridge conformation extend dramatically in the direction parallel to the surface when the system is in ordered state. Finally, the copolymer chain conformation depends strongly on both the blend composition and the incompatibility parameter chi N.

Thionine-interlinked multi-walled carbon nanotube/gold nanoparticle composites

Multi-walled carbon nanotube (MWCNT)/thionine/gold nanoparticle composites were prepared by binding gold nanoparticles to the surfaces of thionine-coated carbon nanotubes. TEM images show gold nanoparticles distributed uniformly on nanotube walls and ends. UV-Vis, Raman, FT-IR, and zeta potential measurements were used to examine the properties of the resulting products. The composites demonstrate significant electrocatalytic activity for oxygen reduction. Although only gold nanoparticles were investigated here, the method could be easily extended to attach other metallic nanoparticles to the sidewalls of carbon nanotubes.

Stable ordered mesoporous silica materials templated by high-temperature stable surfactant micelle in alkaline media

Ordered hexagonal mesoporous silica material (JLU-30) has been successfully synthesized in alkaline media at high temperature (> 160 degreesC, using cationic (1,3-dimethyl-2-imidazolidin-2-ylidene)hexadecylmethyl-ammonium bromide (DIHAB) as a template, and characterized with X-ray diffraction (XRD), transmission electron microscopy (TEM), nitrogen adsorption-desorption isotherms, differential thermal analysis (DTA), and thermogravimetric analysis (TG), as well as Al-27 and Si-29 nuclear magnetic resonance (NMR) spectroscopy. Mesoporous JLU-30 shows much higher hydrothermal stability than MCM-41. Si-29 NMR spectra indicate that the pore walls of JLU-30 samples synthesized at high temperature (160 degreesC) are fully condensed, giving a Q(4)/Q(3) ratio as high as 6.2. In contrast, MCM-41 synthesized at relatively low temperature (100 degreesC) shows the Q(4)/Q(3) + Q(2) ratio at 1.1. Such unique structural feature might be responsible for the observed highly hydrothermal stability of the mesoporous silica materials (JLU-30).

A novel way to synthesize high regular and periodic organic mesoporous silicas

Organic mesoporous silicas (OMSs) were synthesized in the presence of urea via one-pot synthesis method, in which tetraethyl orthosilicate (TEOS) and 3-aminopropyltriethoxysilica (APTES) were used as the silica resources, non-ionic surfactant was used as the template. XRD results showed that the average periodic mesopore sizes of OMSs in the presence of urea were larger than those in the absence of urea. It was also found that the pore sizes of the products in the presence of urea distributed more narrowly than those in the absence of urea, and the contents of organosiloxane incorporated into OMSs, the pore wall thicknesses, the pore volumes and the surface areas of the products all increased with the use of urea. This shows a novel way to synthesize high regular and periodic organic mesoporous silicas.

Facilitated ion transfer across the micro-liquid /liquid interface supported at the tip of a silanized micropipette

Glass micropipettes with silanized inner walls can be filled with an organic solvent for voltammetric measurements in an aqueous solution. This arrangement was employed to investigate systematically the mechanism of facilitated potassium ion transfer by an ionophore dibenzo-18-crown-6 (DB18C6) across a micro-water/1.2-dichloroethane(W/DCE) interface supported at the tip of a silanized micropipette. Our experimental results verify that this facilitated ion transfer across the liquid/liquid interface did occur by an interfacial complexation-dissociation process (TIC-TID mechanism). The ratio of the diffusion coefficient of DB18C6 to that of its complexed ion in the DCE phase was calculated to be 1.74 +/- 0.07.

Molecular and supramolecular deformations and disclinations in a liquid crystalline copolyether thin films under an electrostatic field

An alignment study of a liquid crystalline copolyether TPP-7/11(5/5) thin films has been carried out in a 10 kV . cm(-1) electrostatic field parallel to the thin film surface normal. This copolyether possesses a negative dielectric anisotropy. The chain molecules are homogeneously aligned in the electric field and they form two-dimensionally ordered lamellae in a tilted columnar phase when the samples were cooled to room temperature. It is observed that the chain molecules are splayed to form bent lamellae and the chain direction is perpendicular to the tangential direction of the lamellar surfaces. These lamellae thus become replicas of the chain orientation, Due to the flexoelectric effect and density fluctuation on the thin film free surface, disclinations having topological strength s = 1, c = pi /4 and defect walls form. These s = 1 disclinations possesses both left- and right-handednesses. Discussion of the defect formations have been attempted.

Expression of TNF-alpha gene in Anabaena sp PCC 7120 and purification of its product by affinity chromatography

The effects of N (NaNO3) and C (NaAc) source in medium on the expression of tumor necrosis factor-alpha (TNF-alpha) gene in transgenic Anabaena sp. PCC 7120 were compared. The data showed that N source stabilized the expression of foreign protein and C source altered the synthesis of cell walls. Comparing several methods for breaking the cells, supersonic was able to extract TNF-alpha better than others. For purification of TNF-alpha, transgenic Anabaena cells were broken, the extracts were precipitated with ammonia sulfate, and the impure TNF-alpha was eluted from DEAE ion exchange chromatography. Electrophoresis (PAGE-SDS) showed a single band at 17 kD position.

Study on early-stage development of conchospore in Porphyra yezoensis Ueda

Porphyra yezoensis Ueda (Rhodophyta) is a seaweed of economic importance with a typical dimorphic life cycle consisting of a leafy gametophyte and a filamentous sporophyte. Recently, it has been recognized as a model system for fundamental and applied studies in marine biological sciences. Conchospore, a major spore linking the two distinct multicellular phases in the life cycle, is most widely used in the breeding of P. yezoensis. In this paper, the early-stage development of conchospore, including the attachment and the cell wall formation, was studied with fluorescent reagents staining and Scanning Electron Microscopy detection. Results displayed: (I) the cell wall began to be generated after culturing for 4 h in the attached conchospores; (2) the initially released conchospores were plastids with some filmy, amorphous substance on the surface, and they attached to the fibers firmly via the actively secreted mucilaginous substances after their touch to the fibers; (3) cellulase and pectolase prohibited the attachment of conchospores in the different ways; and (4) only attached conchospores generated cell walls and developed normally, while the suspending ones could not. It indicated that the cellulose played crucial roles in the permanent attachment as the pectin did in the initial attachment. The conchospore attachment seemed to trigger the cell wall formation and the further development. Affects of light on the development of conchospores were also discussed. The results showed that high intensity (200 mu mol.m(-2).s(-1)) and long-wave (>= 580 nm) light facilitated the division rate of conchospores. (C) 2008 Elsevier B.V. All rights reserved.

An analysis of the recent severe storm surge disaster events in China

The economic loss caused by the storm surge disasters is much higher than that caused by any other marine disaster in China, the loss from the severe storm surge disaster being the highest. Statistics show that there were 62 typhoon landings over the east-southeast coast of China since 1990, three of which, occurring in 1992, 1994 and 1997, respectively, caused the most severe damage. The direct economic losses due to these events are 9.3, 17.0 and 30 billion yuan (RMB, or about 1.7, 2.6 and 3.8 billion USD, respectively), which is much greater than the loss of 5.5 billion yuan (RMB) on an average every year during the 1989-1991 period. This paper makes a comparative analysis of the damage caused by the three events and presents an overview of progress of precautions against storm surge disaster in China. The suggested counter measures to mitigate the loss from the severe storm surge disasters in China is as follows: (1) Raise the whole society awareness of precaution against severe storm surge disaster; (2) Work out a new plan for building sea walls; (3) Improve and perfect the available warning and disaster relief command system; (4) Develop the insurance service in order to promptly mitigate the loss caused by severe storm surge disaster event.

Four new species of the Genera Eudesme and Sphaerotrichia (Chordariaceae, Heterokontophyta) from the Chinese Coast

Four new species, Eudesme huanghaiensis Ding et Lu, E. qingdaoensis Ding et Lu, E. shandongensis Ding et Lu and Sphaerotrichia huanghaiensis Ding et Lu, from the western Yellow Sea coast of China are described. Eudesme huanghaiensis is mainly characterized by its spherical or sub-spherical sub-cortical cells, its rhizoidal filaments developing from the basal cells of sub-cortex and its broad sub-cortical and medullary layers. E. qingdaoensis is mainly characterized by its long medullary cells, generally hollow center of the medulla, short sub-cortex with only 3-4 cylindrical cells and long, slender and clavate terminal cells of the rhizoidal filaments. E. shandongensis is mainly characterized by its hollow frond, thick cell walls of both medulla and inner sub-cortical layers and the spherical terminal cells of the rhizoid filaments. Sphaerotrichia huanghaiensis is mainly characterized by its cylindrical, sparsely branched frond with acute angle, and its thick 5-6 layered sub-cortex with long assimilating filaments of 6-10 cells.

Laurencia nanhaiense sp nov., a new species of the genus Laurencia(Rhodomelaceae, Rhodophyta) from China

Laurencia nanhaiense sp. nov. (Rhodomelaceae, Rhodophyta) is described from Hainan and Guangdong Provinces, China. The new species clearly displays one of the defining features of the genus, viz. four periaxial cells per vegetative axial segment. It differs from other closely related species in having a combination of features such as terete axes from a basal system composed of a primary, discoid holdfast and a secondary attachment to give rise to many short rhizoids, branching oppositely and alternately, irregularly tristichous or subverticillately polystichous, having more curve branches with very sparse, adventitious ultimate branchlets, non-projecting superficial cortical cells at the apices of ultimate branchlets, presence of longitudinally oriented secondary pit-connections between contiguous superficial cortical cells, absence of lenticular thickenings in the walls of medullary cells, parallel arrangement of tetrasporangia along the axis of stichidia, and presence of intercellular spaces between medullary cells.

Embryology of Swertia cincta (Gentianaceae) and Its Systematic Value

This paper reports the mega-, micro-sporogenesis and female-, male-gametogenesis of Swertia cincta for the first time, with the aim of discussing the systematic position of section Platynema and section Ophelia of Swertia. Anthers are tetrasporangiate. The development of anther walls conforms to the dicotyledonous type. The tapetum cells have dual origin and are similar to the glandular type. There are two middle layers. The endothecium and epidermis persist. Cytokinesis in the microsporrocyte meiosis is simultaneous type and the microscpore teads are tetrahedral. Pollen grains are 3-celled. The ovary is bicarpellum and unilocular. The placentation is of suparietal placentation with 12 series of ovules. The ovules. The ovule is unitegmic, tenuinucellar and ana-campylotropous, The embryo sac orignates from the single-archesporial cell. The one chalazal megaspore in lienar tetrad become the functional megasore. The development of embryo sac is of the polygonum type. Before fertilization, two polar nuclei fuse into one secondary nucleus. Three antipodal cells persisted and divided into 5-8 cells. A comparison between two sections indicates that section Plathnema is better treated as distinct section and is more advanced than section Ophelia according to the evolutionary trends of embryological characters.

Embryology of Crawfurdia delavayi (Gentianaceae) and its systematic value

The embryological characters of Crawfurdia delavayi Frabnch. are described and the systematic relationships of Crawfurdia discussed. Anthers are tetrasporangiate. The development of anther walls conforms to the Dicotyledonous type. The tapetum is of single origin. The development of the tapetum with uninucleate cells is of the glandular type. The tapetal cells on the connective side show radial elongation or periclinal division and intrude into the anther locule. The epidermis of anther walls persists and its cells become pillar and fibrous, and the endothecium degenerates. The ovary is bicarpellary and unilocular. The placentation is typically parietal with 8 rows of anatropous ovules. The development of embryo sac is of the polygonum type. Before fertilization, two polar nuclei fuse into a secondary nucleus. Three antipodal cells persist. Flowers are protandrous. Fertilization is porogamous. The development of the endosperm is of the nuclear type. The embryogeny corresponds to the solanad type physalis II variation. The embryological data indicate that it is better to separate Crawfurdia from Gentiana as an independent genus.