Vulnerability assessment of reinforced concrete columns subjected to vehicular impacts

Columns are one of the key load bearing elements that are highly susceptible to vehicle impacts. The resulting severe damages to columns may leads to failures of the supporting structure that are catastrophic in nature. However, the columns in existing structures are seldom designed for impact due to inadequacies of design guidelines. The impact behaviour of columns designed for gravity loads and actions other than impact is, therefore, of an interest. A comprehensive investigation is conducted on reinforced concrete column with a particular focus on investigating the vulnerability of the exposed columns and to implement mitigation techniques under low to medium velocity car and truck impacts. The investigation is based on non-linear explicit computer simulations of impacted columns followed by a comprehensive validation process. The impact is simulated using force pulses generated from full scale vehicle impact tests. A material model capable of simulating triaxial loading conditions is used in the analyses. Circular columns adequate in capacity for five to twenty story buildings, designed according to Australian standards are considered in the investigation. The crucial parameters associated with the routine column designs and the different load combinations applied at the serviceability stage on the typical columns are considered in detail. Axially loaded columns are examined at the initial stage and the investigation is extended to analyse the impact behaviour under single axis bending and biaxial bending. The impact capacity reduction under varying axial loads is also investigated. Effects of the various load combinations are quantified and residual capacity of the impacted columns based on the status of the damage and mitigation techniques are also presented. In addition, the contribution of the individual parameter to the failure load is scrutinized and analytical equations are developed to identify the critical impulses in terms of the geometrical and material properties of the impacted column. In particular, an innovative technique was developed and introduced to improve the accuracy of the equations where the other techniques are failed due to the shape of the error distribution. Above all, the equations can be used to quantify the critical impulse for three consecutive points (load combinations) located on the interaction diagram for one particular column. Consequently, linear interpolation can be used to quantify the critical impulse for the loading points that are located in-between on the interaction diagram. Having provided a known force and impulse pair for an average impact duration, this method can be extended to assess the vulnerability of columns for a general vehicle population based on an analytical method that can be used to quantify the critical peak forces under different impact durations. Therefore the contribution of this research is not only limited to produce simplified yet rational design guidelines and equations, but also provides a comprehensive solution to quantify the impact capacity while delivering new insight to the scientific community for dealing with impacts.

Community-based protest against construction projects : a case study of movement continuity

Community-based activism against proposed construction projects is growing. Many protests are poorly managed and escalate into long-term and sometimes acrimonious disputes which damage communities, firms and the construction industry as a whole. Using a thematic storytelling approach which draws on ethnographic method, within a single case study framework, new insights into the social forces that shape and sustain community-based protest against construction projects are provided. A conceptual model of protest movement continuity is presented which highlights the factors that sustain protest continuity over time. The model illustrates how social contagion leads to common community perceptions of development risk and opportunity, to a positive internalization of collective values and identity, to a strategic utilization of social capital and an awareness of the need to manage the emotional dynamics of protest through mechanisms such as symbolic artefacts.

Endogenous mortality, human capital and economic growth

We consider growth and welfare effects of lifetime-uncertainty in an economy with human capital-led endogenous growth. We argue that lifetime uncertainty reduces private incentives to invest in both physical and human capital. Using an overlapping generations framework with finite-lived households we analyze the relevance of government expenditure on health and education to counter such growth-reducing forces. We focus on three different models that differ with respect to the mode of financing of education: (i) both private and public spending, (ii) only public spending, and (iii) only private spending. Results show that models (i) and (iii) outperform model (ii) with respect to long-term growth rates of per capita income, welfare levels and other important macroeconomic indicators. Theoretical predictions of model rankings for these macroeconomic indicators are also supported by observed stylized facts.

Right to the city, desire for the suburb?

The 2000s have been a lively decade for cities. The Worldwatch Institute estimated that 2007 was the first year in human history that more people worldwide lived in cities than the countryside. Globalisation and new digital media technologies have generated the seemingly paradoxical outcome that spatial location came to be more rather than less important, as combinations of firms, industries, cultural activities and creative talents have increasingly clustered around a select node of what have been termed “creative cities,” that are in turn highly networked into global circuits of economic capital, political power and entertainment media. Intellectually, the period has seen what the UCLA geographer Ed Soja refers to as the spatial turn in social theory, where “whatever your interests may be, they can be significantly advanced by adopting a critical spatial perspective”. This is related to the dynamic properties of socially constructed space itself, or what Soja terms “the powerful forces that arise from socially produced spaces such as urban agglomerations and cohesive regional economies,” with the result that “what can be called the stimulus of socio-spatial agglomeration is today being assertively described as the primary cause of economic development, technological innovation, and cultural creativity”

A theory of waste behaviour in the construction industry

Levels of waste within the construction industry need to be reduced for environmental and economic reasons. Changing people's wasteful behaviour can make a significant contribution. This paper describes a research project that used Ajzen's 'theory of planned behaviour' to investigate the attitudinal forces that shape behaviour at the operative level. It concludes that operatives see waste as an inevitable by-product of construction activity. Attitudes towards waste management are not negative, although they are pragmatic and impeded by perceptions of a lack of managerial commitment. Waste management is perceived as a low project priority, and there is an absence of appropriate resources and incentives to support it. A theory of waste behaviour is proposed for the construction industry, and recommendations are made to help managers improve operatives' attitudes towards waste.

Conceptualisation of articular cartilage as a giant reverse micelle: A hypothetical mechanism for joint biocushioning and lubrication

Phospholipid (PL) molecules form the main structure of the membrane that prevents the direct contact of opposing articular cartilage layers. In this paper we conceptualise articular cartilage as a giant reverse micelle (GRM) in which the highly hydrated three-dimensional network of phospholipids is electrically charged and able to resist compressive forces during joint movement, and hence loading. Using this hypothetical base, we describe a hydrophilic-hydrophilic (HL-HL) biopair model of joint lubrication by contacting cartilages, whose mechanism is reliant on lamellar cushioning. To demonstrate the viability of our concept, the electrokinetic properties of the membranous layer on the articular surface were determined by measuring via microelectrophoresis, the adsorption of ions H, OH, Na and Cl on phospholipid membrane of liposomes, leading to the calculation of the effective surface charge density. The surface charge density was found to be -0.08 ± 0.002 cm-2 (mean ± S.D.) for phospholipid membranes, in 0.155 M NaCl solution and physiological pH. This value was approximately five times less than that measured in 0.01 M NaCl. The addition of synovial fluid (SF) to the 0.155 M NaCl solution reduced the surface charge density by 30% which was attributed to the binding of synovial fluid macromolecules to the phospholipid membrane. Our experiments show that particles charge and interact strongly with the polar core of RM. We demonstrate that particles can have strong electrostatic interactions when ions and macromolecules are solubilized by reverse micelle (RM). Since ions are solubilized by reverse micelle, the surface entropy influences the change in the charge density of the phospholipid membrane on cartilage surfaces. Reverse micelles stabilize ions maintaining equilibrium, their surface charges contribute to the stability of particles, while providing additional screening for electrostatic processes. © 2008 Elsevier Ireland Ltd. All rights reserved.

The current context of Queensland primary teacher engagement with professional learning through professional associations

Engaging Queensland primary teachers in professional associations can be a challenge, particularly for subject-specific associations. Professional associations are recognised providers of professional learning. By not being involved in professional associations primary teachers are missing potential quality professional learning opportunities that can impact the results of their students. The purpose of the research is twofold: Firstly, to provide a thorough understanding of the current context in order to assist professional associations who wish to change from their current level of primary teacher engagement; and secondly, to contribute to the literature in the area of professional learning for primary teachers within professional associations. Using a three part research design, interviews of primary teachers and focus groups of professional association participants and executives were conducted and themed to examine the current context of engagement. Force field analysis was used to provide the framework to identify the driving and restraining forces for primary teacher engagement in professional learning through professional associations. Communities of practice and professional learning communities were specifically examined as potential models for professional associations to consider. The outcome is a diagrammatic framework outlining the current context of primary teacher engagement, specifically the driving and restraining forces of primary teacher engagement with professional associations. This research also identifies considerations for professional associations wishing to change their level of primary teacher engagement. The results of this research show that there are key themes that provide maximum impact if wishing to increase engagement of primary teachers in professional associations. However the implications of this lies with professional associations and their alignment between intent and practice dedicated to this change.

Knowledge management in law enforcement : knowledge views for patrolling police officers

This paper describes and classifies different types of knowledge that are a part of police patrol officer's practice. Even though an investigation usually forces a police officer to apply several different knowledge types, this paper discusses different forms of professional knowledge separately to enable categorisation.

Resilience of a corrupt police network : the first and second jokes in Queensland

Resilient organised crime groups survive and prosper despite law enforcement activity, criminal competition and market forces. Corrupt police networks, like any other crime network, must contain resiliency characteristics if they are to continue operation and avoid being closed down through detection and arrest of their members. This paper examines the resilience of a large corrupt police network, namely The Joke which operated in the Australian state of Queensland for a number of decades. The paper uses social network analysis tools to determine the resilient characteristics of the network. This paper also assumes that these characteristics will be different to those of mainstream organised crime groups because the police network operates within an established policing agency rather than as an independent entity hiding within the broader community.

Hamstring strain injuries : factors that lead to injury and re-injury

Hamstring strain injuries (HSIs) are common in a number of sports and incidence rates have not declined in recent times. Additionally, the high rate of recurrent injuries suggests that our current understanding of HSI and re-injury risk is incomplete. Whilst the multifactoral nature of HSIs is agreed upon by many, often individual risk factors and/or causes of injury are examined in isolation. This review aims to bring together the causes, risk factors and interventions associated with HSIs to better understand why HSIs are so prevalent. Running is often identified as the primary activity type for HSIs and given the high eccentric forces and moderate muscle strain placed on the hamstrings during running these factors are considered to be part of the aetiology of HSIs. However, the exact causes of HSIs remain unknown and whilst eccentric contraction and muscle strain purportedly play a role, accumulated muscle damage and/or a single injurious event may also contribute. Potentially, all of these factors interact to varying degrees depending on the injurious activity type (i.e. running, kicking). Furthermore, anatomical factors, such as the biarticular organization, the dual innervations of biceps femoris (BF), fibre type distribution, muscle architecture and the degree of anterior pelvic tilt, have all been implicated. Each of these variables impact upon HSI risk via a number of different mechanisms that include increasing hamstring muscle strain and altering the susceptibility of the hamstrings to muscle damage. Reported risk factors for HSIs include age, previous injury, ethnicity, strength imbalances, flexibility and fatigue. Of these, little is known, definitively, about why previous injury increases the risk of future HSIs. Nevertheless, interventions put in place to reduce the incidence of HSIs by addressing modifiable risk factors have focused primarily on increasing eccentric strength, correcting strength imbalances and improving flexibility. The response to these intervention programmes has been mixed with varied levels of success reported. A conceptual framework is presented suggesting that neuromuscular inhibition following HSIs may impede the rehabilitation process and subsequently lead to maladaptation of hamstring muscle structure and function, including preferentially eccentric weakness, atrophy of the previously injured muscles and alterations in the angle of peak knee flexor torque. This remains an area for future research and practitioners need to remain aware of the multifactoral nature of HSIs if injury rates are to decline.

Jams, jelly beans and the fruits of passion - art book (26 Pages)

Statement: Jams, Jelly Beans and the Fruits of Passion Let us search, instead, for an epistemology of practice implicit in the artistic, intuitive processes which some practitioners do bring to situations of uncertainty, instability, uniqueness, and value conflict. (Schön 1983, p40) Game On was born out of the idea of creative community; finding, networking, supporting and inspiring the people behind the face of an industry, those in the mist of the machine and those intending to join. We understood this moment to be a pivotal opportunity to nurture a new emerging form of game making, in an era of change, where the old industry models were proving to be unsustainable. As soon as we started putting people into a room under pressure, to make something in 48hrs, a whole pile of evolutionary creative responses emerged. People refashioned their craft in a moment of intense creativity that demanded different ways of working, an adaptive approach to the craft of making games – small – fast – indie. An event like the 48hrs forces participants’ attention onto the process as much as the outcome. As one game industry professional taking part in a challenge for the first time observed: there are three paths in the genesis from idea to finished work: the path that focuses on mechanics; the path that focuses on team structure and roles, and the path that focuses on the idea, the spirit – and the more successful teams put the spirit of the work first and foremost. The spirit drives the adaptation, it becomes improvisation. As Schön says: “Improvisation consists on varying, combining and recombining a set of figures within the schema which bounds and gives coherence to the performance.” (1983, p55). This improvisational approach is all about those making the games: the people and the principles of their creative process. This documentation evidences the intensity of their passion, determination and the shit that they are prepared to put themselves through to achieve their goal – to win a cup full of jellybeans and make a working game in 48hrs. 48hr is a project where, on all levels, analogue meets digital. This concept was further explored through the documentation process. All of these pictures were taken with a 1945 Leica III camera. The use of this classic, film-based camera, gives the images a granularity and depth, this older slower technology exposes the very human moments of digital creativity. ____________________________ Schön, D. A. 1983, The Reflective Practitioner: How Professionals Think in Action, Basic Books, New York

Polycaprolactone microspheres as carriers for dry powder inhalers : effect of surface coating on aerosolization of salbutamol sulfate

This study reports the factors controlling aerosolization of salbutamol sulfate (SS) from mixtures with polycaprolactone (PCL) microspheres fabricated using an emulsion technique with polyvinyl alcohol (PVA) as stabilizer. The fine particle fraction (FPF) of SS from PCL measured by a twin-stage impinger was unexpectedly found to be zero, although scanning electron microscopy showed that the drug coated the entire microsphere. Precoating the microspheres with magnesium stearate (MgSt) excipient solutions (1%–2%) significantly increased (p < 0.05, n = 5) the FPF of SS (11.4%–15.4%), whereas precoating with leucine had a similar effect (FPF = 11.3 ± 1.1%), but was independent of the solution concentration. The force of adhesion (by atomic force microscopy) between the PCL microspheres and SS was reduced from 301.4 ± 21.7 nN to 110.9 ± 30.5 nN and 121.8 ± 24.6 nN, (p < 0.05, n = 5) for 1% and 2% MgSt solutions, respectively, and to 148.1 ± 21.0 nN when coated with leucine. The presence of PVA on the PCL microspheres (detected by X-ray photoelectron spectroscopy) affected the detachment of SS due to strong adhesion between the two, presumably due to capillary forces acting between them. Precoating the microspheres with excipients increased the FPF significantly by reducing the drug–carrier adhesion. © 2011 Wiley Periodicals, Inc. and the American Pharmacists Association J Pharm Sci 101:733–745, 2012

Thresholds for error probability measures of business process models

The quality of conceptual business process models is highly relevant for the design of corresponding information systems. In particular, a precise measurement of model characteristics can be beneficial from a business perspective, helping to save costs thanks to early error detection. This is just as true from a software engineering point of view. In this latter case, models facilitate stakeholder communication and software system design. Research has investigated several proposals as regards measures for business process models, from a rather correlational perspective. This is helpful for understanding, for example size and complexity as general driving forces of error probability. Yet, design decisions usually have to build on thresholds, which can reliably indicate that a certain counter-action has to be taken. This cannot be achieved only by providing measures; it requires a systematic identification of effective and meaningful thresholds. In this paper, we derive thresholds for a set of structural measures for predicting errors in conceptual process models. To this end, we use a collection of 2,000 business process models from practice as a means of determining thresholds, applying an adaptation of the ROC curves method. Furthermore, an extensive validation of the derived thresholds was conducted by using 429 EPC models from an Australian financial institution. Finally, significant thresholds were adapted to refine existing modeling guidelines in a quantitative way.