O IMPACTO DA INFLUÊNCIA SOCIAL SOBRE A INTENÇÃO DE USO DE SITES DE COMPRAS COLETIVAS: UM ESTUDO BASEADO NO MODELO UTAUT

A aceitação e o uso de Tecnologia da Informação (TI) pelo indivíduo têm sido estudadas por diferentes modelos conceituais que, em geral, derivaram de teorias da Psicologia como a TRA Theory of Reasoned Action e a TPB Theory of Planned Behavior, derivada da primeira. Um importante modelo de análise dai derivado, resultado da minuciosa análise de outros 8 modelos anteriores, o UTAUT - Unified Theory of Acceptance and Use of Technology de VENKATESH et. al. (2003) tem sido largamente analisado e validado em vários cenários de tecnologia e ambientes. Este trabalho visa compreender de uma maneira mais ampla dos fatores antecedentes da intenção de uso e comportamento de uso a partir do modelo UTAUT, bem como os fatores que melhores explicam a intenção e o comportamento de uso, assim como a análise de seus moderadores. Em seu desenvolvimento, Venkatesh et al. empreenderam comparações em três etapas de implantação e em dois cenários: na adoção mandatória, aquela em que se deu em ambiente empresarial onde o sistema é requerido para execução de processos e tomada de decisões, e na adoção voluntária, cenário em que a adoção se dá pelo indivíduo. No segundo caso, os autores concluíram que o fator influência social tem baixa magnitude e significância, não se revelando um fator importante na adoção da tecnologia. Este trabalho visa analisar também se o mesmo fenômeno ocorre para adoção que se dá de forma voluntária, mas passível de ser altamente influenciada pelos laços sociais, como o que ocorre entre usuários das redes sociais como Orkut, Facebook, Twitter e Linkedin, especialmente em tecnologias que habilitam ganhos associados ao exercício desses laços, como no caso do uso de sites de compras coletivas tais como Peixe Urbano, Groupon e Clickon. Com base no modelo UTAUT, foi aplicada uma pesquisa e posteriormente foram analisados os resultados de 292 respondentes validados que foram acessados por e-mails e redes sociais. A técnica de análise empregada consistiu do uso de modelagem por equações estruturais, com base no algoritmo PLS Partial Least Square, com bootstrap de 1000 reamostragens. Os resultados demonstraram alta magnitude e significância preditiva sobre a Intenção de uso da tecnologia pelos fatores de Expectativa de Desempenho (0,288@0,1%), Influência Social (0,176@0,1%). Os primeiro, compatível com estudos anteriores. Já a magnitude e significância do último fator resultou amplamente superior ao estudo original de Venkatesh et al. (2003) variando entre 0,02 a 0,04, não significante, dependendo dos dados estarem agrupados ou não (p.465). A principal conclusão deste estudo é que, ao considerarmos o fenômeno das compras coletivas, em um ambiente de adoção voluntária, portanto, o fator social é altamente influente na intenção de uso da tecnologia, o que contrasta fortemente com o estudo original do UTAUT (já que no estudo de Venkatesh et al. (2003) este fator não foi significante) e apresenta várias possibilidades de pesquisas futuras e possíveis implicações gerenciais.

ESTUDO DA ADOÇÃO INDIVIDUAL DA REDE SOCIAL PROFISSIONAL LINKEDIN

A intenção de rotatividade refere-se à probabilidade de os indivíduos deixarem o seu trabalho atual. Este tema se tornou relevante para as organizações por ser um potencial problema que pode afetar a competitividade das organizações, entre outros motivos. Acredita-se que alguns dos indivíduos com intenção de rotatividade possivelmente buscam meios de comunicação, novas tecnologias, como a rede social profissional LinkedIn objetivando disseminar suas informações profissionais, localizar oportunidades profissionais, obter mais contatos e informações sobre o mercado de trabalho, entre outras possibilidades. Desse modo, a intenção de rotatividade pode ser avaliada como um fator antecedente à adoção individual da rede social profissional LinkedIn. Este estudo analisou os fatores antecedentes que podem influenciar a intenção de uso e o comportamento de uso da rede social profissional LinkedIn, apoiando-se na perspectiva teórica da Teoria Unificada de Aceitação e Uso da Tecnologia (UTAUT), de Venkatesh et al (2003), e na escala de intenção de rotatividade, de Siqueira et al (2014) e Van Dam (2008). A pesquisa fundamenta-se em uma abordagem de investigação quantitativa na qual os dados foram coletados por meio de um instrumento de pesquisa com a obtenção de 292 questionários respondidos, o que possibilitou a validação dos relacionamentos entre os construtos componentes do modelo de pesquisa desenvolvido para o estudo da adoção individual da rede social profissional LinkedIn. Para realizar o teste das hipóteses do estudo, procedeu-se a análise de equações estruturais, com base no PLS-PM (Partial Least Squares Path Modeling) a partir do qual foram apresentadas medidas satisfatórias para os construtos investigados e o modelo proposto, sendo significativas todas as relações entre os construtos. Os resultados obtidos por esta pesquisa confirmam a influência dos fatores antecedentes Expectativa de Desempenho, Expectativa de Esforço, Influência Social e Intenção de Rotatividade na intenção de uso da rede social profissional LinkedIn. O estudo concluiu que Expectativa de Desempenho revelou-se o fator que mais influencia na intenção de uso do LinkedIn, pois há a percepção de que ao utilizar o LinkedIn pode-se obter benefícios profissionais, entre outros aspectos. O segundo fator que apresentou maior influência na intenção de uso do LinkedIn foi a intenção de rotatividade, uma vez que alguns dos indivíduos, ao adotarem o LinkedIn, provavelmente tendem a mostrar para as outras pessoas/organizações interessadas quais são os seus talentos, suas experiências, competências, além de obter mais contatos, entre outros motivos. Já a Expectativa de Esforço demonstrou que alguns indivíduos percebem que é fácil a interação desta tecnologia. A Influência Social constatou que existe a percepção dos indivíduos quanto à influência da sua rede de contatos na intenção de uso do LinkedIn.

Quantitative risk assessment of groundwater quality utilizing GIS technology and coupled groundwater models

The thesis presents a two-dimensional Risk Assessment Method (RAM) where the assessment of risk to the groundwater resources incorporates both the quantification of the probability of the occurrence of contaminant source terms, as well as the assessment of the resultant impacts. The approach emphasizes the need for a greater dependency on the potential pollution sources, rather than the traditional approach where assessment is based mainly on the intrinsic geo-hydrologic parameters. The risk is calculated using Monte Carlo simulation methods whereby random pollution events were generated to the same distribution as historically occurring events or a priori potential probability distribution. Integrated mathematical models then simulate contaminant concentrations at the predefined monitoring points within the aquifer. The spatial and temporal distributions of the concentrations were calculated from repeated realisations, and the number of times when a user defined concentration magnitude was exceeded is quantified as a risk. The method was setup by integrating MODFLOW-2000, MT3DMS and a FORTRAN coded risk model, and automated, using a DOS batch processing file. GIS software was employed in producing the input files and for the presentation of the results. The functionalities of the method, as well as its sensitivities to the model grid sizes, contaminant loading rates, length of stress periods, and the historical frequencies of occurrence of pollution events were evaluated using hypothetical scenarios and a case study. Chloride-related pollution sources were compiled and used as indicative potential contaminant sources for the case study. At any active model cell, if a random generated number is less than the probability of pollution occurrence, then the risk model will generate synthetic contaminant source term as an input into the transport model. The results of the applications of the method are presented in the form of tables, graphs and spatial maps. Varying the model grid sizes indicates no significant effects on the simulated groundwater head. The simulated frequency of daily occurrence of pollution incidents is also independent of the model dimensions. However, the simulated total contaminant mass generated within the aquifer, and the associated volumetric numerical error appear to increase with the increasing grid sizes. Also, the migration of contaminant plume advances faster with the coarse grid sizes as compared to the finer grid sizes. The number of daily contaminant source terms generated and consequently the total mass of contaminant within the aquifer increases in a non linear proportion to the increasing frequency of occurrence of pollution events. The risk of pollution from a number of sources all occurring by chance together was evaluated, and quantitatively presented as risk maps. This capability to combine the risk to a groundwater feature from numerous potential sources of pollution proved to be a great asset to the method, and a large benefit over the contemporary risk and vulnerability methods.

Transfer of technology to China:A Scandinavian and European perspective

This paper examines the question of technology transfer from the perspective of techno-economic security and how companies respond to the possibility of losing competitive advantage through misappropriation or leakage. It explores transfers from Europe to China and addresses in particular the operations of Scandinavian companies within the context of the general picture for other European firms. Its point of departure is the authors' earlier research that looked at the motivations for transfer and the awareness of companies of techno-economic security issues. This has been supplemented by new data gathered by the authors from a number of Scandinavian companies in China. Specific actions have been identified and the ownership issue is introduced together with consideration of the role of the companies against the 'Ferdows' model. The analysis shows that the nature of the security question has changed together with the evolving context in which the companies are operating. In turn, the response of companies is contingent on a number of factors including the time horizon of the strategy for a unit in China and the nature of the strategy. It is also influenced by the form of ownership and management style in a particular organisation. © 2002 Elsevier Science Ltd. All rights reserved.

Inter-organisational knowledge transfer process model

Knowledge management (KM) is an emerging discipline (Ives, Torrey & Gordon, 1997) and characterised by four processes: generation, codification, transfer, and application (Alavi & Leidner, 2001). Completing the loop, knowledge transfer is regarded as a precursor to knowledge creation (Nonaka & Takeuchi, 1995) and thus forms an essential part of the knowledge management process. The understanding of how knowledge is transferred is very important for explaining the evolution and change in institutions, organisations, technology, and economy. However, knowledge transfer is often found to be laborious, time consuming, complicated, and difficult to understand (Huber, 2001; Szulanski, 2000). It has received negligible systematic attention (Huber, 2001; Szulanski, 2000), thus we know little about it (Huber, 2001). However, some literature, such as Davenport and Prusak (1998) and Shariq (1999), has attempted to address knowledge transfer within an organisation, but studies on inter-organisational knowledge transfer are still much neglected. An emergent view is that it may be beneficial for organisations if more research can be done to help them understand and, thus, to improve their inter-organisational knowledge transfer process. Therefore, this article aims to provide an overview of the inter-organisational knowledge transfer and its related literature and present a proposed inter-organisational knowledge transfer process model based on theoretical and empirical studies.

A note on DEA models in technology selection:an improvement of Karsak and Ahiska's approach

This paper introduces a compact form for the maximum value of the non-Archimedean in Data Envelopment Analysis (DEA) models applied for the technology selection, without the need to solve a linear programming (LP). Using this method the computational performance the common weight multi-criteria decision-making (MCDM) DEA model proposed by Karsak and Ahiska (International Journal of Production Research, 2005, 43(8), 1537-1554) is improved. This improvement is significant when computational issues and complexity analysis are a concern.

Technology sourcing versus technology exploitation:An analysis of US foreign direct investment flows

The traditional paradigm of foreign direct investment (FDI) suggests that FDI is undertaken principally to exploit some firm-specific advantage in a foreign country which provides a locational advantage to the investor. However, recent theoretical work suggests a model of FDI in which the motivation is not to exploit existing technological advantages in a foreign country, but to access such technology and transfer it from the host economy to the investing multinational corporation via spillover effects. This paper tests the technology sourcing versus technology exploiting hypotheses for a panel of sectoral FDI flows between the United States and major OECD nations over a 15 year period. The research makes use of Patel and Vega's (Research Policy, 28, 145-55, 1999) taxonomy of sectors which are likely a priori to exhibit technology sourcing and exploiting behaviour respectively. While there is evidence that FDI flows into the United States are attracted to R and D intensive sectors, very little support is found for the technology sourcing hypothesis either for inward or outward FDI flows. The results suggest that, in aggregate, firm-specific 'ownership' effects remain powerful determinants of FDI flows.

Marking high-technology market evolution through the foci of market stories:the case of local area networks

Previous research suggests that changing consumer and producer knowledge structures play a role in market evolution and that the sociocognitive processes of product markets are revealed in the sensemaking stories of market actors that are rebroadcasted in commercial publications. In this article, the authors lend further support to the story-based nature of market sensemaking and the use of the sociocognitive approach in explaining the evolution of high-technology markets. They examine the content (i.e., subject matter or topic) and volume (i.e., the number) of market stories and the extent to which content and volume of market stories evolve as a technology emerges. Data were obtained from a content analysis of 10,412 article abstracts, published in key trade journals, pertaining to Local Area Network (LAN) technologies and spanning the period 1981 to 2000. Hypotheses concerning the evolving nature (content and volume) of market stories in technology evolution are tested. The analysis identified four categories of market stories - technical, product availability, product adoption, and product discontinuation. The findings show that the emerging technology passes initially through a 'technical-intensive' phase whereby technology related stories dominate, through a 'supply-push' phase, in which stories presenting products embracing the technology tend to exceed technical stories while there is a rise in the number of product adoption reference stories, to a 'product-focus' phase, with stories predominantly focusing on product availability. Overall story volume declines when a technology matures as the need for sensemaking reduces. When stories about product discontinuation surface, these signal the decline of current technology. New technologies that fail to maintain the 'product-focus' stage also reflect limited market acceptance. The article also discusses the theoretical and managerial implications of the study's findings. © 2002 Elsevier Science Inc. All rights reserved.

Introduction: improving manufacturing performance through technology diffusion, implementation and management

The role of technology management in achieving improved manufacturing performance has been receiving increased attention as enterprises are becoming more exposed to competition from around the world. In the modern market for manufactured goods the demand is now for more product variety, better quality, shorter delivery and greater flexibility, while the financial and environmental cost of resources has become an urgent concern to manufacturing managers. This issue of the International Journal of Technology Management addresses the question of how the diffusion, implementation and management of technology can improve the performance of manufacturing industries. The authors come from a large number of different countries and their contributions cover a wide range of topics within this general theme. Some papers are conceptual, others report on research carried out in a range of different industries including steel production, iron founding, electronics, robotics, machinery, precision engineering, metal working and motor manufacture. In some cases they describe situations in specific countries. Several are based on presentations made at the UK Operations Management Association's Sixth International Conference held at Aston University at which the conference theme was 'Achieving Competitive Edge: Getting Ahead Through Technology and People'. The first two papers deal with questions of advanced manufacturing technology implementation and management. Firstly Beatty describes a three year longitudinal field study carried out in ten Canadian manufacturing companies using CADICAM and CIM systems. Her findings relate to speed of implementation, choice of system type, the role of individuals in implementation, organization and job design. This is followed by a paper by Bessant in which he argues that a more a strategic approach should be taken towards the management of technology in the 1990s and beyond. Also considered in this paper are the capabilities necessary in order to deploy advanced manufacturing technology as a strategic resource and the way such capabilities might be developed within the firm. These two papers, which deal largely with the implementation of hardware, are supplemented by Samson and Sohal's contribution in which they argue that a much wider perspective should be adopted based on a new approach to manufacturing strategy formulation. Technology transfer is the topic of the following two papers. Pohlen again takes the case of advanced manufacturing technology and reports on his research which considers the factors contributing to successful realisation of AMT transfer. The paper by Lee then provides a more detailed account of technology transfer in the foundry industry. Using a case study based on a firm which has implemented a number of transferred innovations a model is illustrated in which the 'performance gap' can be identified and closed. The diffusion of technology is addressed in the next two papers. In the first of these, by Lowe and Sim, the managerial technologies of 'Just in Time' and 'Manufacturing Resource Planning' (or MRP 11) are examined. A study is described from which a number of factors are found to influence the adoption process including, rate of diffusion and size. Dahlin then considers the case of a specific item of hardware technology, the industrial robot. Her paper reviews the history of robot diffusion since the early 1960s and then tries to predict how the industry will develop in the future. The following two papers deal with the future of manufacturing in a more general sense. The future implementation of advanced manufacturing technology is the subject explored by de Haan and Peters who describe the results of their Dutch Delphi forecasting study conducted among a panel of experts including scientists, consultants, users and suppliers of AMT. Busby and Fan then consider a type of organisational model, 'the extended manufacturing enterprise', which would represent a distinct alternative pure market-led and command structures by exploiting the shared knowledge of suppliers and customers. The three country-based papers consider some strategic issues relating manufacturing technology. In a paper based on investigations conducted in China He, Liff and Steward report their findings from strategy analyses carried out in the steel and watch industries with a view to assessing technology needs and organizational change requirements. This is followed by Tang and Nam's paper which examines the case of machinery industry in Korea and its emerging importance as a key sector in the Korean economy. In his paper which focuses on Venezuela, Ernst then considers the particular problem of how this country can address the problem of falling oil revenues. He sees manufacturing as being an important contributor to Venezuela's future economy and proposes a means whereby government and private enterprise can co-operate in development of the manufacturing sector. The last six papers all deal with specific topics relating to the management manufacturing. Firstly Youssef looks at the question of manufacturing flexibility, introducing and testing a conceptual model that relates computer based technologies flexibility. Dangerfield's paper which follows is based on research conducted in the steel industry. He considers the question of scale and proposes a modelling approach determining the plant configuration necessary to meet market demand. Engstrom presents the results of a detailed investigation into the need for reorganising material flow where group assembly of products has been adopted. Sherwood, Guerrier and Dale then report the findings of a study into the effectiveness of Quality Circle implementation. Stillwagon and Burns, consider how manufacturing competitiveness can be improved individual firms by describing how the application of 'human performance engineering' can be used to motivate individual performance as well as to integrate organizational goals. Finally Sohal, Lewis and Samson describe, using a case study example, how just-in-time control can be applied within the context of computer numerically controlled flexible machining lines. The papers in this issue of the International Journal of Technology Management cover a wide range of topics relating to the general question of improving manufacturing performance through the dissemination, implementation and management of technology. Although they differ markedly in content and approach, they have the collective aim addressing the concepts, principles and practices which provide a better understanding the technology of manufacturing and assist in achieving and maintaining a competitive edge.

Application of CFD to model fast pyrolysis of biomass

The article deals with the CFD modelling of fast pyrolysis of biomass in an Entrained Flow Reactor (EFR). The Lagrangian approach is adopted for the particle tracking, while the flow of the inert gas is treated with the standard Eulerian method for gases. The model includes the thermal degradation of biomass to char with simultaneous evolution of gases and tars from a discrete biomass particle. The chemical reactions are represented using a two-stage, semi-global model. The radial distribution of the pyrolysis products is predicted as well as their effect on the particle properties. The convective heat transfer to the surface of the particle is computed using the Ranz-Marshall correlation.

Consumer brand equity : a model for the measurement, analysis and evaluation of consumer perceived value

The topic of my research is consumer brand equity (CBE). My thesis is that the success or otherwise of a brand is better viewed from the consumers’ perspective. I specifically focus on consumers as a unique group of stakeholders whose involvement with brands is crucial to the overall success of branding strategy. To this end, this research examines the constellation of ideas on brand equity that have hitherto been offered by various scholars. Through a systematic integration of the concepts and practices identified but these scholars (concepts and practices such as: competitiveness, consumer searching, consumer behaviour, brand image, brand relevance, consumer perceived value, etc.), this research identifies CBE as a construct that is shaped, directed and made valuable by the beliefs, attitudes and the subjective preferences of consumers. This is done by examining the criteria on the basis of which the consumers evaluate brands and make brand purchase decisions. Understanding the criteria by which consumers evaluate brands is crucial for several reasons. First, as the basis upon which consumers select brands changes with consumption norms and technology, understanding the consumer choice process will help in formulating branding strategy. Secondly, an understanding of these criteria will help in formulating a creative and innovative agenda for ‘new brand’ propositions. Thirdly, it will also influence firms’ ability to simulate and mould the plasticity of demand for existing brands. In examining these three issues, this thesis presents a comprehensive account of CBE. This is because the first issue raised in the preceding paragraph deals with the content of CBE. The second issue addresses the problem of how to develop a reliable and valid measuring instrument for CBE. The third issue examines the structural and statistical relationships between the factors of CBE and the consequences of CBE on consumer perceived value (CPV). Using LISREL-SIMPLIS 8.30, the study finds direct and significant influential links between consumer brand equity and consumer value perception.