On the advanced analysis of steel frames allowing for flexural, local and lateral-torsional buckling

Detailed procedure for second-order analysis has been coded in the newest Eurocode 3 and the Hong Kong steel code (2005). The effective length method has been noted to be inapplicable to analysis of shallow domes of imperfect members exhibiting snap-through buckling, to portals with leaning columns and others. On the other hand, the advanced analysis is not limited to buckling design of these structures. This paper demonstrates its application to the design of a simple plane sway portal and a three diminsional non-sway steel building. The results by the advanced analysis and the first-order linear analysis are compared and the technique for practical second-order analysis steel structures is described. It is observed that the use of a straight element by itself cannot model the buckling resistance of columns governed by different buckling curves for hot-rolled and cold-formed sections of various shapes like I, H, hollow etc. Also the curvature of the conventional cubic Hermite element is not varied by the external axial force and thus it cannot simulate the response of a buckling column. Thus its use for second-order analysis is basically unacceptable. A technique for additional checking of beams undergoing lateral-torsional buckling is also suggested making the advanced analysis a complete design tool for conventional steel frames.

Inelastic finite element analysis of composite beams on the basis of the plastic hinge approach

This paper emphasizes material nonlinear effects on composite beams with recourse to the plastic hinge method. Numerous combinations of steel and concrete sections form arbitrary composite sections. Secondly, the material properties of composite beams vary remarkably across its section from ductile steel to brittle concrete. Thirdly, concrete is weak in tension, so composite section changes are dependent on load distribution. To this end, the plastic zone approach is convenient for inelastic analysis of composite sections that can evaluate member resistance, including material nonlinearities, by routine numerical integration with respect to every fiber across the composite section. As a result, many researchers usually adopt the plastic zone approach for numerical inelastic analyses of composite structures. On the other hand, the plastic hinge method describes nonlinear material behaviour of an overall composite section integrally. Consequently, proper section properties for use in plastic hinge spring stiffness are required to represent the material behaviour across the arbitrary whole composite section. In view of numerical efficiency and convergence, the plastic hinge method is superior to the plastic zone method. Therefore, based on the plastic hinge approach, how to incorporate the material nonlinearities of the arbitrary composite section into the plastic hinge stiffness formulation becomes a prime objective of the present paper. The partial shear connection in this paper is by virtue of the effective flexural rigidity as AISC 1993 [American Institute of Steel Construction (AISC). Load and resistance factor design specifications. 2nd ed., Chicago; 1993]. Nonlinear behaviour of different kinds of composite beam is investigated in this paper, including two simply supported composite beams, a cantilever and a two span continuous composite beam.

The impact of personal identity and intimacy on the use of social media

Personal identity and intimacy levels change over time and this can influence the way consumers buy and use goods and services. This thesis examined how levels of personal identity and intimacy influence the use of social media by consumers of different ages. A survey of 208 users of facebook demonstrated that consumers with weak levels of personal identity use social media to increase their identity and popularity, while consumers with strong levels of personal identity use social media for self-expression. Consumers with high intimacy levels use social media for socian connection and social investigation.

Why GP lenses are on the decline

Current contact lens prescribing data speaks for itself: GP lenses represented 5 percent or less of fits in 13 of the 27 countries examined in the February 2009 article "International Contact Lens Prescribing in 2008" by Morgan et al. GP lens fitting is becoming a specialist activity undertaken by a minority of practitioners. I believe the question is no longer: "Are GP lenses on the decline?" but rather: "Why are GP lenses on the decline?" So, here I'll try to answer the latter question.

Understanding the implications of digital interactions on the design of public urban spaces

This study investigated the impact of digital networked social interactions on the design of public urban spaces. Urban informatics, social media, ubiquitous computing, and mobile technology offer great potential to urban planning, as tools of communication, community engagement, and placemaking. The study considers the function of public spaces as 'third places,' that is, social places that are familiar, comfortable, social and meaningful for everyday life outside the home and work. Libraries were chosen as the study's focus. The study produced findings and insights at the intersection of urban planning (place), cultural geography and urban sociology (people), and information communication technology (technology) – the triad of urban informatics.

Literacies on the Web : Co-Production of Literary Texts on Fan Fiction Sites

In this chapter the authors discuss and informal learning settings such as fan fiction sites and their relations to teaching and learning within formal learning settings. Young people today spend a lot of time with social media built on user generated content. These media are often characterized by participatory culture which offers a good environment for developing skills and identity work. In this chapter the authors problematize fan fiction sites as informal learning settings where the possibilities to learn are powerful and significant. They also discuss the learning processes connected to the development of literacies. Here the rhetoric principle of “imitatio” plays a vital part as well as the co-production of texts on the sites, strongly supported by the beta reader and the power of positive feedback. They also display that some fans, through the online publication of fan fiction, are able to develop their craft in a way which previously have been impossible.

The Deleuze Spray, New York 1977 : an Interview with Sanford Kwinter, Professor of Architectural Theory and Criticism at the Harvard Graduate School of Design, on the Architectural Reception of Gilles Deleuze in America

So what do you want to know? I was in Paris between ‘75 and ‘78. But about half way through, Sylvère published the Anti-Oedipus issue of Semiotext(e) and, actually, that was for me one of the deciding events that made me decide to come to the United States, to come study at Columbia University. There appeared to be this little group working at Columbia working around these issues. In 1970, in Paris even, Deleuze was a cult – there was an incredibly small number of people following Deleuze... A transcript of my Interview with Kwinter about the Architectural Reception of Deleuze in America, which took place at Jerry’s,' Soho, New York, 15 January 2003. The transcript appeared as an Appendix at the back of my Masters Thesis undertaken at Yale School of Architecture, printed May 2003.

An Interview with Sylvère Lotringer, Jean Baudrillard Chair at the European Graduate School and Professor Emeritus of French Literature and Philosophy at Columbia University, on the Architectural Contribution to Semiotext(e), Schizoculture, and the Early Deleuze and Guattari Scene at Columbia University

An Interview with Sylvère Lotringer, Jean Baudrillard Chair at the European Graduate School and Professor Emeritus of French Literature and Philosophy at Columbia University, on the Architectural Contribution to Semiotext(e), Schizoculture, and the Early Deleuze and Guattari Scene at Columbia University, which took place at the Department of French, Columbia University, New York City, July 2003. This interview exists as an audio cassette tape recording.

Repeatability of confocal microscopy measurements on the central and peripheral cornea

Purpose To assess confocal microscopy repeatability (ConfoScan3, Nidek, Italy) when assessing the morphology of the limbus, midperipheral and central cornea. Method The central, mid-peripheral and limbal cornea (temporal and nasal) of the right eye of 8 subjects were examined with a ConfoScan3 in two different visits, at least six months apart. Bland-Altman repeatability was measured for 29 parameters: basal cell density and size, anterior and posterior keratocyte densities (AKD/PKD), endothelial cell density, polymegethism, pleomorphism, mean area and sides of endothelial cells - in the five different corneal areas examined. Results As a percentage of the mean absolute values, repeatability of 0–10% was classified as “excellent”, between 10–30% as “acceptable” and over 30% as “poor”. Repeatability was excellent for 14% of parameters and acceptable for 52% of parameters. The number of endothelial cell sides in the central cornea demonstrated the best repeatability (2.0%) whilst mid-temporal PKD showed the poorest repeatability (53.7%). Conclusions Confocal microscopy is at least an adequately repeatablemethodof evaluating the various corneal layers at different locations. Our dataset supports the ongoing use of the technique in research and clinical practice.

A Review On The Production Of Levulinic Acid And Furanics From Sugars

Sugarcane products represent an abundant and relatively low cost carbon resource that can be utilised to produce chemical intermediates such as levulinic acid and furanics. These chemicals can be easily upgraded to commodity and specialty chemicals and biofuels by high yielding and well established technologies. However, there are challenges and technical hurdles that need to be overcome before these chemical intermediates can be cost-effectively produced in commercial quantities. The paper reviews production of levulinic acid and furanics from sugars by homogeneous mineral acid catalysts, and reports on preliminary studies on the production of these compounds with environmentally friendly biodegradable sulfonic acids. The yields (>50% of theoretical) of levulinic acid, formic acid and furfural obtained with these organic acids are comparable to that of sulphuric acid currently used for their production.

The influence of food literacy on the everyday practicalities of meeting nutrition recommendations

Contemporary nutrition policies and plans call for focussing efforts to improve nutrition through a closer connection with food and the everyday practicalities of how people live and eat. Various words have been used to articulate what this might mean in practice. More recently, the term “food literacy” has emerged to explain this gap between the policy aims the (in)ability of people to know, understand and use food to meet nutrition recommendations. Despite its increasing use, there is no common understanding of this term or its components. Once established, food literacy could be measured in order to examine its association with nutritional outcomes. A Delphi study of 43 Australian food experts from diverse sectors and settings explored their understanding of the term “food literacy”, the likely components and possible relationship with nutrition. The three round Delphi study began with a semi-structured telephone interview and was followed by two online surveys. Constructivist grounded theory was used to analyse data, from which a conceptual model of the relationship between food literacy and nutrition was developed. The model was then tested and refined following a phenomenological study of 37 young people aged 16-25 years who were responsible for feeding themselves. They were interviewed about their food intake, day-to-day food decision making, the knowledge and skills used and their perceptions of someone who is “good with food”. Analysis from the Delphi study identified, eighty components of food literacy and these were grouped into eight domains: 1)access, 2)planning and management, 3)selection, 4)knowing where food comes from, 5)preparation, 6)eating, 7)nutrition and 8)food related language. When these were compared to results of the Young People’s study it was found that while specific components of food literacy were largely contextual, the importance of all eight domains continued to be relevant. The results of these qualitative studies have set the boundaries and scope of meaning of food literacy and will be used to inform the development of measurable variables to be tested in a quantitative cross-sectional study. This prospective study will examine the relationship between food literacy and nutrition. This research is useful in guiding government strategy and investment, and informing the planning, implementation and evaluation of interventions by practitioners.

Mining universities : can we count on the integrity of research coming out of today's mining-funded tertiary sector?

Australia's economic growth and national identity have been widely celebrated as being founded on the nation's natural resources. With the golden era of pastoralism fading into the distance, a renewed love affair with primary industries has been much lauded, particularly by purveyors of neoliberal ideology. The considerable wealth generated by resource extraction has, despite its environmental and social record, proved seductive to the university sector. The mining industry is one of a number of industries and sectors (alongside pharmaceutical, chemical and biotechnological) that is increasingly courting Australian universities. These new public-private alliances are often viewed as the much-needed cash cow to bridge the public funding shortfall in the tertiary sector. However, this trend also raises profound questions about the capacity of public good institutions, as universities were once assumed to be, to maintain institutional independence and academic freedoms.

Projecting the impact of climate change on the transmission of Ross River virus : methodological challenges and research needs

Ross River virus (RRV) is the most common vector-borne disease in Australia. It is vitally important to make appropriate projections on the future spread of RRV under various climate change scenarios because such information is essential for policy-makers to identify vulnerable communities and to better manage RRV epidemics. However, there are many methodological challenges in projecting the impact of climate change on the transmission of RRV disease. This study critically examined the methodological issues and proposed possible solutions. A literature search was conducted between January and October 2012, using the electronic databases Medline, Web of Science and PubMed. Nineteen relevant papers were identified. These studies demonstrate that key challenges for projecting future climate change on RRV disease include: (1) a complex ecology (e.g. many mosquito vectors, immunity, heterogeneous in both time and space); (2) unclear interactions between social and environmental factors; and (3) uncertainty in climate change modelling and socioeconomic development scenarios. Future risk assessments of climate change will ultimately need to better understand the ecology of RRV disease and to integrate climate change scenarios with local socioeconomic and environmental factors, in order to develop effective adaptation strategies to prevent or reduce RRV transmission.

Conjunctivitis associated with Chlamydia pecorum in three koalas (Phascolarctos cinereus) in the Mount Lofty Ranges, South Australia

Chlamydiosis is a significant factor contributing to the decline of koala (Phascolarctos cinereus) populations in Australia but has not previously been reported in South Australia. We describe conjunctivitis in three wild koalas from South Australia, with Chlamydia pecorum identified by quantitative PCR.