Sistemi catalitici per la reazione di water - gas shift a media temperatura

Negli ultimi anni l’interesse nei confronti dell’H2 è cresciuto notevolmente per l’aumento della richiesta energetica mondiale. Uno dei processi più importanti per la produzione di H2 utilizza la reazione di Water-Gas Shift (WGS) per il trattamento delle correnti in uscita dai processi di steam reforming o di ossidazione parziale catalitica. CO + H2O  CO2 + H2 ∆H0298 = -41,2 KJ/mol Sono quindi stati sviluppati sistemi catalitici attivi nella reazione di WGS a media temperatura (circa 300 °C). Partendo da sistemi catalitici a base di Cu/Zn/Al, ottenuti da precursori idrotalcitici e sviluppati in lavori di tesi precedenti, sono state effettuate modifiche nella composizione al fine di aumentarne l’attività e la stabilità. L’aggiunta di piccole quantità di Mg ha un effetto positivo sull’attività dei sistemi catalitici, con effetti più evidenti a 250 °C. Tuttavia, l’aumento del contenuto di Mg, sebbene migliori le proprietà fisiche del catalizzatore (area superficiale e dispersione del Cu) sia del campione calcinato che di quello scaricato dopo reazione, peggiora drasticamente l’attività catalitica. L’aggiunta di piccole quantità di Mg sembra portare alla stabilizzazione della specie attiva Cu+ e promuovere un meccanismo redox superficiale (Cu0 e Cu+). E’ possibile correlare la conversione del CO con il rapporto ZnO/Cu, confermando il ruolo nella reazione di WGS dell’interazione Cu0/ZnO libero. La sostituzione di Mg con Ba comporta un miglioramento delle prestazioni catalitiche, in particolare nelle condizioni MTS (300 °C), suggerendo una più facile dissociazione dell’acqua legata alla stabilizzazione degli ossidrili da parte dei siti basici. È però accompagnato da una diminuzione della stabilità nelle condizioni di reazione. L’aggiunta di piccole quantità di La, Ce o Zr (con un rapporto Al/R = 50 mol/mol) incrementa la stabilità termica, sia in termini di proprietà fisiche che di attività catalitica. A seguito dei cicli termici di invecchiamento accelerato, infatti, non si riscontrano importanti diminuzioni di attività catalitica, evidenziando un’elevata stabilità della fase attiva.

3D nanostructured microcarriers for cell therapy in regenerative medicine

Supercritical Emulsion Extraction technology (SEE-C) was proposed for the production of poly-lactic-co-glycolic acid microcarriers. SEE-C operating parameters as pressure, temperature and flow rate ratios were analyzed and the process performance was optimized in terms of size distribution and encapsulation efficiency. Microdevices loaded with bovine serum insulin were produced with different sizes (2 and 3 µm) or insulin charges (3 and 6 mg/g) and with an encapsulation efficiency of 60%. The microcarriers were characterized in terms of insulin release profile in two different media (PBS and DMEM) and the diffusion and degradation constants were also estimated by using a mathematical model. PLGA microdevices were also used in a cultivation of embryonic ventricular myoblasts (cell line H9c2 obtained from rat) in a FBS serum free medium to monitor cell viability and growth in dependence of insulin released. Good cell viability and growth were observed on 3 µm microdevices loaded with 3 mg/g of insulin. PLGA microspheres loaded with growth factors (GFs) were charged into alginate scaffold with human Mesenchimal Steam Cells (hMSC) for bone tissue engineering with the aim of monitoring the effect of the local release of these signals on cells differentiation. These “living” 3D scaffolds were incubated in a direct perfusion tubular bioreactor to enhance nutrient transport and exposing the cells to a given shear stress. Different GFs such as, h-VEGF, h-BMP2 and a mix of two (ratio 1:1) were loaded and alginate beads were recovered from dynamic (tubular perfusion system bioreactor) and static culture at different time points (1st, 7th, 21st days) for the analytical assays such as, live/dead; alkaline phosphatase; osteocalcin; osteopontin and Van Kossa Immunoassay. The immunoassay confirmed always a better cells differentiation in the bioreactor with respect to the static culture and revealed a great influence of the BMP-2 released in the scaffold on cell differentiation.

Vanillin production from ferulic acid with Pseudomonas fluorescens BF13-1p4

Bioconversion of ferulic acid to vanillin represents an attractive opportunity for replacing synthetic vanillin with a bio-based product, that can be label “natural”, according to current food regulations. Ferulic acid is an abundant phenolic compound in cereals processing by-products, such as wheat bran, where it is linked to the cell wall constituents. In this work, the possibility of producing vanillin from ferulic acid released enzymatically from wheat bran was investigated by using resting cells of Pseudomonas fluorescens strain BF13-1p4 carrying an insertional inactivation of vdh gene and ech and fcs BF13 genes on a low copy number plasmid. Process parameters were optimized both for the biomass production phase and the bioconversion phase using food-grade ferulic acid as substrate and the approach of changing one variable while fixing the others at a certain level followed by the response surface methodology (RSM). Under optimized conditions, vanillin up to 8.46 mM (1.4 g/L) was achieved, whereas highest productivity was 0.53 mmoles vanillin L-1 h-1). Cocktails of a number of commercial enzyme (amylases, xylanases, proteases, feruloyl esterases) combined with bran pre-treatment with steam explosion and instant controlled pressure drop technology were then tested for the release of ferulic acid from wheat bran. The highest ferulic acid release was limited to 15-20 % of the ferulic acid occurring in bran, depending on the treatment conditions. Ferulic acid 1 mM in enzymatic hydrolyzates could be bioconverted into vanillin with molar yield (55.1%) and selectivity (68%) comparable to those obtained with food-grade ferulic acid after purification from reducing sugars with a non polar adsorption resin. Further improvement of ferulic acid recovery from wheat bran is however required to make more attractive the production of natural vanillin from this by-product.

Innovative processes for syngas production

The research of new advanced processes for syngas production is a part of a European project for the production of a new Gas to Liquid Process (NextGTL). The crucial points in the production of GTL process are the energy required for the air separation used in autothermal reforming or the heat required for steam reforming and the efficiency in carbon utilization. Therefore a new multistep oxy-reforming process scheme was developed at lower temperature with intermediate H2 membrane separation to improve the crucial parameter. The process is characterized by a S/C of 0.7 and O2/C of 0.21 having a smoothed temperature profile in which kinetic regime is easily obtained. Active catalysts for low temperature oxy-reforming process have been studied working at low pressure to discriminate among the catalyst and at high pressure to prove it on industrial condition. It allows the selection of the Rh as active phase among single and bimetallic VIII group metal. The study of the matrix composition and thermal treatment has been carried out on Rh-Mg/Al hydrotalcite selected as reference catalyst. The research to optimize the catalyst lead to enhanced performances through the identification of a limitation of the Rh reduction from the oxides matrix as key point to increase the Rh performances. The Rh loading have been studied to allow the catalyst scale up for pilot process in Chieti in a shape of Rh-HT on honeycomb ceramic material. The developed catalyst has enhanced methane conversion in a inch diameter monolith reactor if compared with the semi-industrial catalyst chosen in the project as the best reference.

Studio del comportamento catalitico nella reazione di Water Gas Shift a media ed alta temperatura

Per massimizzare la quantità di H2 nel gas di sintesi ottenuto dal processo di Steam Reforming (SR) si utilizza la reazione di Water Gas Shift (WGS): CO + H2O ⇆ CO2 + H2 ∆H0298 = - 41,2 KJ/mol Sulla base di sistemi catalitici Cu/Zn/Al si è cercato di modificarne la composizione per ottenere catalizzatori attivi e stabili in un intervallo di temperatura tra 350-450 °C, (High Temperature Shift o HTS), al fine di sostituire i tradizionali sistemi a base di Fe/Cr, in relazione alle limitazioni ambientali all’utilizzo del Cr e per poter operare con valori inferiori del rapporto S/DG. Si sono inoltre studiate le caratteristiche dei catalizzatori e le condizioni di reazione che favoriscono la produzione di metilammine ed alcoli nel processo a temperature intermedie, tra 300-350 °C (Middle Temperature Shift o MTS), in relazione alla disattivazione che questi composti comportano nel processo di SR a seguito del riciclo della fase acquosa dal reattore di WGS.

Catalysts and processes for next-generation H2 production

The present study is focused on the development of new VIII group metal on CeO2 – ZrO2 (CZO) catalyst to be used in reforming reaction for syngas production. The catalyst are tested in the oxyreforming process, extensively studied by Barbera [44] in a new multistep process configuration, with intermediate H2 membrane separation, that can be carried out at lower temperature (750°C) with respect the reforming processes (900 – 1000°C). In spite of the milder temperatures, the oxy-reforming conditions (S/C = 0.7; O2/C = 0.21) remain critical regarding the deactivation problems mainly deriving from thermal sintering and carbon formation phenomena. The combination of the high thermal stability characterizing the ZrO2, with the CeO2 redox properties, allows the formation of stable mixed oxide system with high oxygen mobility. This feature can be exploited in order to contrast the carbon deposition on the active metal surface through the oxidation of the carbon by means of the mobile oxygen atoms available at the surface of the CZO support. Ce0.5Zr0.5O2 is the phase claimed to have the highest oxygen mobility but its formation is difficult through classical synthesis (co-precipitation), hence a water-in-oil microemulsion method is, widely studied and characterized. Two methods (IWI and bulk) for the insertion of the active metal (Rh, Ru, Ni) are followed and their effects, mainly related to the metal stability and dispersion on the support, are discussed, correlating the characterization with the catalytic activity. Different parameters (calcination and reduction temperatures) are tuned to obtain the best catalytic system both in terms of activity and stability. Interesting results are obtained with impregnated and bulk catalysts, the latter representing a new class of catalysts. The best catalysts are also tested in a low temperature (350 – 500°C) steam reforming process and preliminary tests with H2 membrane separation have been also carried out.

A chemical-loop approach for the generation of hydrogen by means of ethanol reforming

The work investigates the feasibility of a new process aimed at the production of hydrogen with inherent separation of carbon oxides. The process consists in a cycle in which, in the first step, a mixed metal oxide is reduced by ethanol (obtained from biomasses). The reduced metal is then contacted with steam in order to split the water and sequestrating the oxygen into the looping material’s structure. The oxides used to run this thermochemical cycle, also called “steam-iron process” are mixed ferrites in the spinel structure MeFe2O4 (Me = Fe, Co, Ni or Cu). To understand the reactions involved in the anaerobic reforming of ethanol, diffuse reflectance spectroscopy (DRIFTS) was used, coupled with the mass analysis of the effluent, to study the surface composition of the ferrites during the adsorption of ethanol and its transformations during the temperature program. This study was paired with the tests on a laboratory scale plant and the characterization through various techniques such as XRD, Mössbauer spectroscopy, elemental analysis... on the materials as synthesized and at different reduction degrees In the first step it was found that besides the generation of the expected CO, CO2 and H2O, the products of ethanol anaerobic oxidation, also a large amount of H2 and coke were produced. The latter is highly undesired, since it affects the second step, during which water is fed over the pre-reduced spinel at high temperature. The behavior of the different spinels was affected by the nature of the divalent metal cation; magnetite was the oxide showing the slower rate of reduction by ethanol, but on the other hand it was that one which could perform the entire cycle of the process more efficiently. Still the problem of coke formation remains the greater challenge to solve.

Design and optimization of turbo-expanders for organic rankine cycles

In a world focused on the need to produce energy for a growing population, while reducing atmospheric emissions of carbon dioxide, organic Rankine cycles represent a solution to fulfil this goal. This study focuses on the design and optimization of axial-flow turbines for organic Rankine cycles. From the turbine designer point of view, most of this fluids exhibit some peculiar characteristics, such as small enthalpy drop, low speed of sound, large expansion ratio. A computational model for the prediction of axial-flow turbine performance is developed and validated against experimental data. The model allows to calculate turbine performance within a range of accuracy of ±3%. The design procedure is coupled with an optimization process, performed using a genetic algorithm where the turbine total-to-static efficiency represents the objective function. The computational model is integrated in a wider analysis of thermodynamic cycle units, by providing the turbine optimal design. First, the calculation routine is applied in the context of the Draugen offshore platform, where three heat recovery systems are compared. The turbine performance is investigated for three competing bottoming cycles: organic Rankine cycle (operating cyclopentane), steam Rankine cycle and air bottoming cycle. Findings indicate the air turbine as the most efficient solution (total-to-static efficiency = 0.89), while the cyclopentane turbine results as the most flexible and compact technology (2.45 ton/MW and 0.63 m3/MW). Furthermore, the study shows that, for organic and steam Rankine cycles, the optimal design configurations for the expanders do not coincide with those of the thermodynamic cycles. This suggests the possibility to obtain a more accurate analysis by including the computational model in the simulations of the thermodynamic cycles. Afterwards, the performance analysis is carried out by comparing three organic fluids: cyclopentane, MDM and R245fa. Results suggest MDM as the most effective fluid from the turbine performance viewpoint (total-to-total efficiency = 0.89). On the other hand, cyclopentane guarantees a greater net power output of the organic Rankine cycle (P = 5.35 MW), while R245fa represents the most compact solution (1.63 ton/MW and 0.20 m3/MW). Finally, the influence of the composition of an isopentane/isobutane mixture on both the thermodynamic cycle performance and the expander isentropic efficiency is investigated. Findings show how the mixture composition affects the turbine efficiency and so the cycle performance. Moreover, the analysis demonstrates that the use of binary mixtures leads to an enhancement of the thermodynamic cycle performance.

Synthesis of new bioactive β-lactam compounds

New biologically active β-lactams were designed and synthesized, developing novel antibiotics and enzymatic inhibitors directed toward specific targets. Within a work directed to the synthesis of mimetics for RGD (Arg-Gly-Asp) sequence able to interact with αvβ3 and α5β1-type integrins, new activators were developed and their Structure-Activity Relationships (SAR) analysis deepened, enhancing their activity range towards the α4β1 isoform. Moreover, to synthesize novel compounds active both against bacterial infections and pulmonary conditions of cystic fibrosis patients, new β-lactam candidates were studied. Among the abundant library of β-lactams prepared, mainly with antioxidant and antibacterial double activities, it was identified a single lead to be pharmacologically tested in vivo. Its synthesis was optimized up to the gram-scale, and pretreatment method and HPLC-MS/MS analytical protocol for sub-nanomolar quantifications were developed. Furthermore, replacement of acetoxy group in 4-acetoxy-azetidinone derivatives was studied with different nucleophiles and in aqueous media. A phosphate group was introduced and the reactivity exploited using different hydroxyapatites, obtaining biomaterials with multiple biological activities. Following the same kind of reactivity, a small series of molecules with a β-lactam and retinoic hybrid structure was synthesized as epigenetic regulators. Interacting with HDACs, two compounds were respectively identified as an inhibitor of cell proliferation and a differentiating agent on steam cells. Additionally, in collaboration with Professor L. De Cola at ISIS, University of Strasbourg, some new photochemically active β-lactam Pt (II) complexes were designed and synthesized to be used as bioprobes or theranostics. Finally, it was set up and optimized the preparation of new chiral proline-derived α-aminonitriles through an enantioselective Strecker reaction, and it was developed a chemo-enzymatic oxidative method for converting alcohols to aldehydes or acid in a selective manner, and amines to relative aldehydes, amides or imines. Moreover, enzymes and other green chemistry methodologies were used to prepare Active Pharmaceutical Ingredients (APIs).

Development of an innovative pyrolysis plant for the production of secondary raw materials

This project was born with the aim of developing an environmentally and financially sustainable process to dispose of end-life tires. In this perspective was devised an innovative static bed batch pilot reactor where pyrolysis can be carried out on the whole tires in order to recover energy and materials and simultaneously save the energy costs of their shredding. The innovative plant is also able to guarantee a high safety of the process thanks to the presence of a hydraulic guard. The pilot plant was used to pyrolyze new and end-life tires at temperatures from 400 to 600°C with step of 50°C in presence of steam. The main objective of this research was to evaluate the influence of the maximum process temperature on yields and chemical-physics properties of pyrolysis products. In addition, in view of a scale-up of the plant in continuous mode, the influence of the nature of several different tires as well as the effects of the aging on the final products were studied. The same pilot plant was also used to carry out pyrolysis on polymeric matrix composites in order to obtain chemical feedstocks from the resin degradation together with the recovery of the reinforcement in the form of fibers. Carbon fibers reinforced composites ad fiberglass was treated in the 450-600°C range and the products was fully characterized. A second oxidative step was performed on the pyrolysis solid residue in order to obtain the fibers in a suitable condition for a subsequent re-impregnation in order to close the composite Life Cycle in a cradle-to-cradle approach. These investigations have demonstrated that steel wires, char, carbon and glass fibers recovered in the prototypal plant as solid residues can be a viable alternative to pristine materials, making use of them to obtain new products with a commercial added value.

Nuovi modelli organizzativi: il caso Valve Corporation

La tesi espone il caso della Valve Corporation, una azienda produttrice e distributrice di Videogiochi. Questa azienda, leader nel suo settore, ha adottato una organizzazione di tipo "flat" ed ha ideato particolari e innovative soluzioni per la produzione dei suoi software. Ha inoltre sviluppato una piattaforma di distribuzione digitale per la vendita online di Videogiochi.

1st and 2nd Generation Ethanol from Biomass Crops

In chapter 1 and 2 calcium hydroxide as impregnation agent before steam explosion of sugarcane bagasse and switchgrass, respectively, was compared with auto-hydrolysis, assessing the effects on enzymatic hydrolysis and simultaneous saccharification and fermentation (SSF) at high solid concentration of pretreated solid fraction. In addition, anaerobic digestion of pretreated liquid fraction was carried out, in order to appraise the effectiveness of calcium hydroxide before steam explosion in a more comprehensive way. In As water is an expensive input in both cultivation of biomass crops and subsequent pretreatment, Chapter 3 addressed the effects of variable soil moisture on biomass growth and composition of biomass sorghum. Moreover, the effect of water stress was related to the characteristics of stem juice for 1st generation ethanol and structural carbohydrates for 2nd generation ethanol. In the frame of chapter 1, calcium hydroxide was proven to be a suitable catalyst for sugarcane bagasse before steam explosion, in order to enhance fibre deconstruction. In chapter 2, effect of calcium hydroxide on switchgrass showed a great potential when ethanol was focused, whereas acid addition produced higher methane yield. Regarding chapter 3, during crop cycle the amount of cellulose, hemicellulose and AIL changed causing a decrease of 2G ethanol amount. Biomass physical and chemical properties involved a lower glucose yield and concentration at the end of enzymatic hydrolysis and, consequently, a lower 2G ethanol concentration at the end of simultaneous saccharification and fermentation, proving that there is strong relationship between structure, chemical composition, and fermentable sugar yield. The significantly higher concentration of ethanol at the early crop stage could be an important incentive to consider biomass sorghum as second crop in the season, to be introduced into some agricultural systems, potentially benefiting farmers and, above all, avoiding the exacerbation of the debate about fuel vs food crops.

Catalizzatori per la reazione di Water Gas Shift a media ed alta temperatura

L’H2 è un vettore energetico di elevato interesse, utilizzato nell’industria chimica per la produzione di NH3 e CH3OH, oltre che per le reazioni di idrogenazione ed HDS. Un importante processo nella produzione di H2 è la reazione di Water Gas Shift (WGS), usata nel trattamento delle correnti uscenti dal reattore di Steam Reforming (SR) del metano: CO + H2O  CO2 + H2 ∆H0298K = -41,2 KJ/mol. Sulla base di precedenti lavori, sono stati sviluppati nuovi catalizzatori per la reazione WGS ad alta temperatura (HTS), alternativi ai tradizionali sistemi a base di Fe/Cr, in considerazione dei vincoli economici (elevati valori del rapporto vapore/gas secco o S/DG) ed ambientali (formazione di CrVI) di questi sistemi. Partendo da sistemi Cu/Zn/Al con un basso contenuto di rame, ottenuti da precursori tipo idrotalcite (HT), stato studiato l’effetto dell’aggiunta di piccole quantità di alcuni promotori sull’attività e stabilità dei catalizzatori ottenuti, osservando un effetto positivo sulle caratteristiche fisiche, come l’aumento dell’area superficiale e della dispersione della fase attiva. I campioni contenenti i promotori erano inoltre caratterizzati da una maggiore stabilità termica e, in alcuni casi, da un’attività catalitica superiore a quella del catalizzatore di riferimento privo di promotori. L’aggiunta di piccole quantità di alcali alla formulazione con la migliore attività portava ad un ulteriore aumento di attività e di stabilità, attribuibile ad una minore formazione di coke sulla superficie. I sistemi più interessanti potevano operare anche a bassi valori del rapporto S/DG, interessanti dal punto di vista industriale. Lo studio dell’adsorbimento di CO mediante FT-IR ha permesso di ipotizzare la possibile natura della fase attiva nei sistemi. Infine, lo studio è stato esteso a sistemi per la reazione di WGS a media temperatura (MTS), osservando anche in questo caso un positivo effetto legato all’aggiunta di promotori, con un aumento dell’attività catalitica e della stabilità con il tempo di reazione.

Reforming dell'etanolo con processo ciclico: studio della reattività di ossidi misti con struttura spinello

This work deals with a study on the feasibility of a new process, aimed at the production of hydrogen from water and ethanol (a compound obtained starting from biomasses), with inherent separation of hydrogen from C-containing products. The strategy of the process includes a first step, during which a metal oxide is contacted with ethanol at high temperature; during this step, the metal oxide is reduced and the corresponding metallic form develops. During the second step, the reduced metal compound is contacted at high temperature with water, to produce molecular hydrogen and with formation of the original metal oxide. In overall, the combination of the two steps within the cycle process corresponds to ethanol reforming, where however COx and H2 are produced separately. Various mixed metal oxides were used as electrons and ionic oxygen carriers, all of them being characterized by the spinel structure typical of M-modified non-stoichiometric ferrites: M0,6Fe2,4O4 (M = Co, Mn or Co/Mn). The first step was investigated in depth; it was found that besides the generation of the expected CO, CO2 and H2O, the products of ethanol anaerobic oxidation, also a large amount of H2 and coke were produced. The latter is highly undesired, since it affects the second step, during which water is fed over the pre-reduced spinel at high temperature. The behavior of the different spinels was affected by the nature of the divalent metal cation. The new materials were tested in terms of both redox proprieties and catalytic activity to generate hydrogen. Still the problem of coke formation remains the greater challenge to solve.

Sviluppo di un sistema integrato innovativo per la contemporanea produzione e separazione di H2 ultrapuro, attraverso oxy-reforming, water-gas shift e membrane al Pd

Il presente lavoro di tesi si è focalizzato sullo studio e sulla ottimizzazione di un sistema integrato, che utilizzi la reazione di oxy-reforming del metano al fine di produrre syngas che venga trattato attraverso la water-gas shift al fine di abbattere il contenuto di CO e al tempo stesso aumentare la resa in H2. Con l’obiettivo di ottenere H2 ad elevata purezza (>99%) da poter essere inviato direttamente a celle a combustible ed in impianti di piccola taglia con possibile delocalizzazione della produzione industriale di energia elettrica e termica “pulita”, la miscela reale uscente dal processo di oxy-reforming è stata processata tramite successiva water-gas shift direttamente all’interno di una membrana ceramica al Pd selettiva nella separazione di H2. L’innovativià di questo progetto di studio è data da diversi parametri quali: 1) l’impiego dell’oxy-reforming in alternativa al normale steam-reforming del CH4, che permette di condurre il processo a temperature decisamente inferiori (700-750°C), utilizzando un minor quantitativo di vapore (S/C = 0.7); 2) l’utilizzo di due nuove formulazioni di catalizzatore di WGS per alte temperature, capace di operare in un unico stadio conversioni di CO ottenibili industrialmente solo attraverso i convenzionali due due stadi di reazione (e due diverse formulazioni di catalizzatori a base di Fe/Cr e Cu); 3) l’utilizzo di supporti ceramici con membrana a base di Pd, capaci di ospitare al loro interno un catalizzatore eterogeneo per la reazione di WGS a 400°C, rendendo quindi possibile la produzione e contemporanea separazione di H2 con un ulteriore effetto positivo poiché la membrana rimuovendo H2 dalla zona di reazione favorisce il superamento dell’equilibrio termodinamico per la conversione del CO, abbassandone il contenuto nel flusso uscente dei gas reazione e rendendo non più necessari sistemi aggiuntivi di separazione quali PSA o PROXY.