Comparing adult-youth and adult-adult online sexual solicitation: Manipulative behaviors, situational factors, and outcomes

Online sexual solicitation (solicitation) of youth has received widespread media and research attention during the last decade. The prevalence rates of youth who have experienced solicitation or solicitation attempts vary between studies depending on the methodology used (e.g., whether youth or adults are the target study group). In studies focusing on youth victims, the prevalence of solicitation attempts made by adults during the past year is typically reported to be between 5 and 9%. Adults who solicit youth online have been found to use deception and other manipulative behaviors to gain access to sexual activities with youth. However, previous studies have lacked a control group of adults who solicit other adults online. Without this comparison, one could argue that deceiving others online about one’s identity, and engaging in manipulative behaviors, is an inherent part of most online sexual interactions with strangers. Additionally, little is known about the associations between manipulative behaviors and the solicitation outcomes. In research concerning offline sexual behaviors, it has been noted that situational factors, such as sexual arousal, may alter both sexual interest and behavior. The effects of situational factors on online sexual behaviors have been less extensively studied (especially so with a quantitative approach); no studies have to date focused on adults’ solicitation of youth. Investigating the role of a lowered sexual age preference and the role of situational factors in the soliciting adults could be an important step in order to receive deeper knowledge of the role of traits and states in the context of solicitation. Additionally, there is a lack of knowledge of the effect of the age of the youth. Although previous studies on solicitation has found that older youth, compared with younger youth and children, are more often solicited, the possible reasons for this have not been investigated. Are adults who solicit youth affected by legal deterrence (through the legal age of consent), is it because older youth are more available online, or are the adults’ age preferences merely a product of a normally distributed age preference in the population? The purpose of the present thesis was fivefold: 1) to obtain an estimate of the frequency of adults’ solicitation of youth as self-reported and observed in actual behavior; 2) to explore whether the legal age of consent (LAC) affects solicitation frequency, or whether a normally distributed sexual age preference more accurately describe the proportion of solicited youth of different ages; 3) to investigate the associations of both traits (e.g., lower sexual age preference) and states (immediate situational factors, such as alcohol intoxication), and the solicitation target; 4) to explore whether adults who solicit youth and adults who solicit adults are equally deceitful and manipulative online, and whether the different solicitation outcomes are as common in both groups; and 5) to investigate whether the deceitful and manipulative behaviors engaged in had different associations with the solicitation outcomes depending on the age of the solicited. In the survey study, a convenience sample of 1393 adult participants (aged 18 years or older) self-reported any online communication with strangers during the past year. Of these, 56% (776 respondents) reported that they had solicited or attempted to solicit at least one stranger. Of the respondents, 453 (58.4%) were men, and 323 (41.6%) were women. Participants with only adult contacts (18 years or older) constituted the majority (640 respondents). In contrast, 136 individuals reported a youth contact (a 13 year old or younger, or a 14 to 17-year old). Approximately half of the participants were men in the adult contact group, while 75% of the participants were men in the youth contact group. Approximately 60% of the participants with youth contacts were recruited from two websites associated with a pedophilic sexual interest. In an online quasi-experimental study, with researchers impersonating youth of different ages (10–18 year olds) in chat rooms, 251 online conversations with chat room visitors made up the entire sample. All chat room visitors alleged to be men. The self-reported frequency of having solicited youth (0–17-year olds) during the past year was approximately 10% in our sample of adults who reported communicating with any strangers online. When we observed this behavior in chat rooms, we found that approximately 30% of the chat room visitors who believed they interacted with a 10 to 14 year old attempted to solicit the youth. We found that solicitation attempts increased equally much when increasing the age of the impersonated youth from 14 to 16, as from 16 to 18. Thus, we concluded that a normally distributed age preference in the population was a more plausible explanation to the effect of the age of the solicited, rather than the LAC (here; 15 and 16). If the chat room visitors would have been deterred only by the LAC, we would have expected that the change in amount of solicitation attempts from an illegal age group to a legal age group would have been significantly stronger than changes between age groups within illegal-illegal and legal-legal groups. Our subsample of survey participants from the pedophilia-related websites expectedly reported that they had solicited youth more often in comparison to the sample gathered through general (i.e., not associated with any particular sexual preference) websites. We also found that participants with a youth contact reported higher levels of sexual arousal and shame before the sexual interaction with their online contact, compared with participants with an adult contact. Additionally, the participants with youth contacts who reported consumption of child- and adolescent pornography also reported being more sexually aroused before the interaction, compared to the participants with youth contacts who did not report consumption of these kinds of pornography. We also found clear indications that the online sexual interaction had an alleviatory effect on reported levels of sadness, boredom and stress, independent of the age of the contact. Generally, the participants with youth and adult contacts reported deceiving their contacts as often and suggesting keeping the communication a secret from someone as often. Participants with a youth contact, however, reported using more persuasion techniques for online sexual purposes or for the purpose of an offline meeting, compared to those with an adult contact. In the chat rooms, we found that more indirect ways of future sexual communication (e.g., continuing chatting) was suggested by the chat room visitors that were under the assumption of interacting with youth aged 10 to 14, compared with more direct means (e.g., meeting offline). Survey participants with youth contacts who had used deception, suggested keeping the interactions a secret, and/or persuaded their contact by appealing to the contacts feelings of love and attachment for the participant had also more often engaged in cybersex with the contact. No other manipulative behaviors were associated with the other investigated solicitation outcomes (receiving a sexual picture, meeting offline, and engaging in sexual contact offline) within this group of participants. However, using deception, suggesting secrecy and using persuasion was also positively associated with certain solicitation outcomes within participants with an adult contact. In summary, adults’ solicitation of youth is much more frequent when observed in chat rooms than self-reported. Additionally, an underlying lowered sexual age preference seems to be a motivating factor on a group level in adults who solicit youth. We concluded that directed prevention efforts should be made on pedophiliarelated websites. Additionally, the role of situational factors, especially sexual arousal in persons with a pedo- or hebephilic sexual interest should be investigated further in the context of online sexual solicitation.

Catalytic upgrading of biomass extractives to fine chemicals over supported ionic liquid catalysts (SILCAs)

Behovet av förnyelsebar energi ökar ständigt eftersom det finns en strävan att minska beroendet av fossila bränslen. Dessutom är tillgångar av fossila bränslen begränsade. Miljövänliga processer för bioraffinaderier erbjuder en stor möjlighet för produktion av energi, bränslen och kemikalier. Den finska och svenska skogsindustrin har en lång tradition i utnyttjandet av skogsbiomassor. Bioraffinaderier som integreras med pappers- och cellulosaindustrin kan frambringa både ekonomiska och ekologiska fördelar i framställning av traditionella och biobaserade produkter. I doktorsarbetet studerades omvandling av extraktivämnen till finkemikalier som kan användas t.ex. av läkemedelsindustrin. Extraktivämnen fås ur biomassa. I forskningsarbetet framställdes biobaserade finkemikalier med hjälp av katalysatorer som baserar sig på joniska vätskor. Biomassan består av cellulosa, hemicellulosa, lignin och extraktivämnen, vilka huvudsakligen är terpener, vaxer och fettsyror. Extraktivämen är vedens komponenter, som kan separeras ur vedmaterialet med hjälp av neutrala lösningsmedel. Joniska vätskekatalysatorer som var immobiliserade på fasta bärare utnyttjades för isomerisering av α,β-pinenoxider samt hydrogenering citral. Inverkan av joniska vätskor på katalysatorns aktivitet och reaktionernas produktfördelning undersöktes under varierande reaktionsbetingelser. Kinetiska modeller för pinenoxidens isomeriseringsreaktioner beskrev väl experimentellt upptäckta skillnader mellan olika katalysatorer. --------------------------------------------------- Uusiutuvan energian tarve on kasvussa, koska riippuvuutta fossiilisista polttoaineista pyritään vähentämään. Tämän lisäksi fossiilisten polttoaineiden varannot ovat rajalliset. Ympäristöystävälliset biojalostusprosessit ovat näin ollen suuri mahdollisuus energian, polttoaineiden ja kemikaalien tuotannossa. Suomen ja Ruotsin metsäteollisuudella on pitkät perinteet metsäbiomassojen hyödyntämisessä. Paperi- ja selluteollisuuden yhteyteen integroiduilla biojalostamoilla voidaan luoda taloudellisia ja ympäristöllisiä etuja sekä perinteisten että biopohjaisten tuotteiden valmistuksessa. Väitöstyössä on tutkittu biomassan uuteaineiden kemiallista muuntamista hienokemikaaleiksi, joita voidaan käyttää esimerkiksi lääkeaineteollisuudessa. Biopohjaisia hienokemikaaleja on valmistettu biomassan uuteaineista ionisiin nesteisiin perustuvilla katalyyteillä. Biomassa koostuu selluloosasta, hemiselluloosasta, ligniinistä sekä uuteaineista, jotka ovat pääosin terpeenejä, vahoja tai rasvahappoja. Uuteaineet ovat puun komponentteja, jotka voidaan erottaa puusta neutraalien liuottimien avulla. Kiinteän kantajan päälle immobilisoituja ionisia nestekatalyyttejä (Supported Ionic Liquid Catalyst) hyödynnettiin α,β-pineenioksidien isomerisointireaktioissa sekä sitraalin vedytysreaktioissa. Ionisten nesteiden vaikutusta katalyyttien aktiivisuuteen sekä reaktioiden tuotejakaumaan tutkittiin erilaisissa reaktio-olosuhteissa. Pineenioksidien isomerisointireaktioiden kineettiset mallit kuvasivat hyvin kokeellisesti todettuja katalyyttien eroavaisuuksia.

Designing sustainable industrial ecosystems : the case of a biogas-for-traffic solution

This thesis focuses on the development of sustainable industrial architectures for bioenergy based on the metaphors of industrial symbiosis and industrial ecosystems, which imply exchange of material and energy side-flows of various industries in order to improve sustainability of those industries on a system level. The studies on industrial symbiosis have been criticised for staying at the level of incremental changes by striving for cycling waste and by-flows of the industries ‘as is’ and leaving the underlying industry structures intact. Moreover, there has been articulated the need for interdisciplinary research on industrial ecosystems as well as the need to extend the management and business perspectives on industrial ecology. This thesis addresses this call by applying a business ecosystem and business model perspective on industrial symbiosis in order to produce knowledge on how industrial ecosystems can be developed that are sustainable environmentally and economically. A case of biogas business is explored and described in four research papers and an extended summary that form this thesis. Since the aim of the research was to produce a normative model for developing sustainable industrial ecosystems, the methodology applied in this research can be characterised as constructive and collaborative. A constructive research mode was required in order to expand the historical knowledge on industrial symbiosis development and business ecosystem development into the knowledge of what should be done, which is crucial for sustainability and the social change it requires. A collaborative research mode was employed through participating in a series of projects devoted to the development of a biogas-for-traffic industrial ecosystem. The results of the study showed that the development of material flow interconnections within industrial symbiosis is inseparable from larger business ecosystem restructuring. This included a shift in the logic of the biogas and traffic fuel industry and a subsequent development of a business ecosystem that would entail the principles of industrial symbiosis and localised energy production and consumption. Since a company perspective has been taken in this thesis, the role of an ecosystem integrator appeared as a crucial means to achieve the required industry restructuring. This, in turn, required the development of a modular and boundary-spanning business model that had a strong focus on establishing collaboration among ecosystem stakeholders and development of multiple local industrial ecosystems as part of business growth. As a result, the designed business model of the ecosystem integrator acquired the necessary flexibility in order to adjust to local conditions, which is crucial for establishing industrial symbiosis. This thesis presents a normative model for the development of a business model required for creating sustainable industrial ecosystems, which contributes to approaches at the policy-makers’ level, proposed earlier. Therefore, this study addresses the call for more research on the business level of industrial ecosystem formation and the implications for the business models of the involved actors. Moreover, the thesis increases the understanding of system innovation and innovation in business ecosystems by explicating how business model innovation can be the trigger for achieving more sustainable industry structures, such as those relying on industrial symbiosis.

Experiences among primary school teachers in Tanzania

The overall aim of the study was to explore primary school teachers’ experiences of constraints to their work, and actions taken for improvement after undergoing in-service courses in the Education Quality Improvement through Pedagogy program. The research interest was thus to deepen the understanding of teachers’ experiences of constraints to their work and experiences of actions taken to improve classroom actions. In order to achieve this ambition, the study was conducted with primary school teachers in Shinyanga district-Tanzania. Two research questions guided the study: What do teachers experience as constraints to their work? The second: How have teachers improved their classroom actions after undergoing professional development courses? The theoretical framework of the study is centred on limiting and enabling frames on teachers’ work and professional development. In order to understand the classroom situations, qualitative research was designed applying a phenomenological approach with semi-structured interview, observation and videotaping to collect data. Forty experienced primary school teachers from ten primary schools participated in the study. The results of the first research question indicate that teachers face many constraints in their work. Three categories identified as interactional, environmental and professional role constraints. The most critical experienced by all teachers is teaching in large classes and inadequate teaching and learning materials. The results of the second research question show that teachers’ actions taken for improving their work were influenced by professional development activities. Three main categories including expanded interaction, expanded use of environment and expanded professional roles were identified. Generally, the knowledge generated is relevant for viewing teachers’ experiences of the challenges they encounter in teaching and the importance of professional development beyond the sampled respondents. The results suggest that constant provision of teachers’ professional development could improve teaching performance.

Changing teachers´ practices in regular schools enrolling children with visual impairment

The number of persons with visual impairment in Tanzania is estimated to over 1.6 million. About half a million of these persons are children aged 7-13. Only about 1% of these children are enrolled in schools. The special schools and units are too few and in most cases they are far away from the children’s homes. More and more regular schools are enrolling children with visual impairment, but the schools lack financial resources, tactile teaching materials and trained special education teachers. Children with visual impairment enrolled in regular schools seldom get enough support and often fail in examinations. The general aim of this study was to contribute to increased knowledge and understanding about how teachers can change their teaching practices and thus facilitate the learning of children with visual impairment included in regular classrooms as they participate in an action research project. The project was conducted in a primary school in a poor rural region with a high frequency of blindness and visual impairment. The school was poorly resourced and the average number of pupils per class was 90. The teachers who participated in the collaborative action research project were the 14 teachers who taught blind or visually impaired pupils in grades 4 and 6, in total 6 pupils. The action research project was conducted during a period of 6 months and was carried out in five cycles. The teachers were actively involved in all the project activities; identifying challenges, planning solutions, producing teaching materials, reflecting on outcomes, collaborating and evaluating. Empirical data was collected with questionnaires, interviews, observations and focus group discussions. The findings of the study show that the teachers managed to change their teaching practices through systematic reflection, analysis and collaboration. The teachers produced a variety of tactile teaching materials, which facilitated the learning of the pupils with visual impairment. The pupils learned better and felt more included in the regular classes. The teachers gained new knowledge and skills. They grew professionally and started to collaborate with each other. The study contributes to new knowledge of how collaborative action research can be conducted in the area of special education in a Tanzanian school context. The study has also relevance to the planning of school-based professional development programs and teacher education programs in Tanzania and in other low-income countries. The results also point at strategies which can promote inclusion of children with disabilities in regular schools.

Thermal reactions of the major hydrocarbon components of biomass gasification gas

Gasification of biomass is an efficient method process to produce liquid fuels, heat and electricity. It is interesting especially for the Nordic countries, where raw material for the processes is readily available. The thermal reactions of light hydrocarbons are a major challenge for industrial applications. At elevated temperatures, light hydrocarbons react spontaneously to form higher molecular weight compounds. In this thesis, this phenomenon was studied by literature survey, experimental work and modeling effort. The literature survey revealed that the change in tar composition is likely caused by the kinetic entropy. The role of the surface material is deemed to be an important factor in the reactivity of the system. The experimental results were in accordance with previous publications on the subject. The novelty of the experimental work lies in the used time interval for measurements combined with an industrially relevant temperature interval. The aspects which are covered in the modeling include screening of possible numerical approaches, testing of optimization methods and kinetic modelling. No significant numerical issues were observed, so the used calculation routines are adequate for the task. Evolutionary algorithms gave a better performance combined with better fit than the conventional iterative methods such as Simplex and Levenberg-Marquardt methods. Three models were fitted on experimental data. The LLNL model was used as a reference model to which two other models were compared. A compact model which included all the observed species was developed. The parameter estimation performed on that model gave slightly impaired fit to experimental data than LLNL model, but the difference was barely significant. The third tested model concentrated on the decomposition of hydrocarbons and included a theoretical description of the formation of carbon layer on the reactor walls. The fit to experimental data was extremely good. Based on the simulation results and literature findings, it is likely that the surface coverage of carbonaceous deposits is a major factor in thermal reactions.

α-Pinene oxide and verbenol oxide isomerizations over heterogeneous catalysts

Terpenes are a valuable natural resource for the production of fine chemicals. Turpentine, obtained from biomass and also as a side product of softwood industry, is rich in monoterpenes such as α-pinene and β-pinene, which are widely used as raw materials in the synthesis of flavors, fragrances and pharmaceutical compounds. The rearrangement of their epoxides has been thoroughly studied in recent years, as a method to obtain compounds which are further used in the fine chemical industry. The industrially most desired products of α-pinene oxide isomerization are campholenic aldehyde and trans-carveol. Campholenic aldehyde is an intermediate for the manufacture of sandalwood-like fragrances such as santalol. Trans-carveol is an expensive constituent of the Valencia orange essence oil used in perfume bases and food flavor composition. Furthermore it has been found to exhibit chemoprevention of mammary carcinogenesis. A wide range of iron and ceria supported catalysts were prepared, characterized and tested for α-pinene oxide isomerization in order to selective synthesis of above mentioned products. The highest catalytic activity in the preparation of campholenic aldehyde over iron modified catalysts using toluene as a solvent at 70 °C (total conversion of α-pinene oxide with a selectivity of 66 % to the desired aldehyde) was achieved in the presence of Fe-MCM-41. Furthermore, Fe-MCM-41 catalyst was successfully regenerated without deterioration of catalytic activity and selectivity. The most active catalysts in the synthesis of trans-carveol from α-pinene oxide over iron and ceria modified catalysts in N,N-dimethylacetamide as a solvent at 140 °C (total conversion of α-pinene oxide with selectivity 43 % to trans-carveol) were Fe-Beta-300 and Ce-Si-MCM-41. These catalysts were further tested for an analogous reaction, namely verbenol oxide isomerization. Verbenone is another natural organic compound which can be found in a variety of plants or synthesized by allylic oxidation of α-pinene. An interesting product which is synthesized from verbenone is (1R,2R,6S)-3-methyl-6-(prop-1-en-2-yl)cyclohex-3-ene-1,2-diol. It has been discovered that this diol possesses potent anti-Parkinson activity. The most effective way leading to desired diol starts from verbenone and includes three stages: epoxidation of verbenone to verbenone oxide, reduction of verbenone oxide and subsequent isomerization of obtained verbenol oxide, which is analogous to isomerization of α-pinene oxide. In the research focused on the last step of these synthesis, high selectivity (82 %) to desired diol was achieved in the isomerization of verbenol oxide at a conversion level of 96 % in N,N-dimethylacetamide at 140 °C using iron modified zeolite, Fe-Beta-300. This reaction displayed surprisingly high selectivity, which has not been achieved yet. The possibility of the reuse of heterogeneous catalysts without activity loss was demonstrated.

Vision, image, record : a cultivation of the visual field

I den första delen av den här avhandlingen presenteras en bildens genealogi. Den skildrar hur begreppen för bilden, seendet och jaget utvecklades i relation till varandra i en specifik vetenskaplig och filosofisk kontext. Berättelsen sträcker sig från den tidiga renässansen och det perspektivistiska måleriet, till fotografiets födelse och positivismen. Den här utvecklingen medförde en form av reduktionism i vilken jagets roll – betydelsen av den mänskliga psykologin, vårt omdöme, vår uppmärksamhet och vår vilja – blev förbisedd. Inom den här tanketraditionen uppstod en förskjutning, från en förståelse av bilden som en representation av det tredimensionella rummet på en tvådimensionell yta, till en uppfattning om bilden som en genomskinlig ruta, ett fönster ut mot världen. Idén om avbildningen som en neutral ”blick från ingenstans” kom att förstärka en skeptisk hållning till kommunikation, dialog och vittnesmål och därmed även undergräva vår tillit till varandra och följaktligen vår tillit till oss själva. I den andra delen erbjuder författaren ett alternativ till den tanketradition som behandlas i den första delen. Det som blev förbisett i uppfattningen om en blick från ingenstans var att bilden är ett hjälpmedel då vi bearbetar vårt synfält. Bilden hjälper oss att dela vår syn på saker. Genom den här uppgiften av att dela blir bilden riktningsgivande i våra försök att orientera oss i världen. Jag kan stå bredvid en annan människa och se vad hon ser, men jag vet inte nödvändigtvis hur hon uppfattar det vi ser. Bilden lägger till ett led i det här förhållandet eftersom den inte enbart visar vad den andra ser. När bilden fungerar som den skall visar den också hur den andra ser och på det här sättet blir bilden verksam. Den föreliggande avhandlingen kombinerar epistemologi med vetenskapshistoria och visuella kulturstudier, men dess huvudintresse är filosofiskt. Den befattar sig med filosofiska missförstånd angående avbildning som en mimetisk konstform, kunskap som domesticering och varseblivning som mottagning av data. ------------------------------------------------------ Tämän väitöskirjan ensimmäinen osa selvittää kuvakäsitteen genealogiaa. Se havainnollistaa miten kuvan, näkemisen ja minän käsitteet kehittyivät suhteessa toisiinsa. Kertomus ulottuu varhaisesta renessanssista ja perspektivistisestä maalaustaiteesta, positivismin aikakauteen ja valokuvan syntyyn. Tämä kehitys toi mukanaan reduktionismin jossa minän rooli – ihmisen psykologian merkitys, meidän arviointikyky, meidän huomiokyky sekä meidän tahtomme – vaipui unohduksiin. Ajatusmaailmassa tapahtui siirtymä, kuvan merkitys vaihtui käsityksestä jossa se on kolmiulotteisen tilan representaatio kaksiulotteisella pinnalla, käsitykseen jossa kuva on läpinäkyvä ruutu, ikkuna kohti maailmaa. Ajatus kuvasta neutraalin näkökulman kantajana vahvisti skeptistä suhtautumista kommunikaatiota, dialogisuutta ja subjektiivisuutta kohtaan. Tämä skeptisyys ilmentyi myös vahvana epäluottamuksena ihmiskeskeisyyttä ja toiseutta kohtaan. Toisessa osassa tekijä tarjoaa vaihtoehdon tälle skeptiselle ajatusmaailmalle jota tarkastellaan ensimmäisessä osassa. Kuva on myös väline joka auttaa meitä jäsentämään meidän näkökenttäämme. Se auttaa meitä jakamaan meidän käsityksiä toistemme kanssa. Tämä näkemisen jakamisen käytäntö on kuvan keskeinen tehtävä. Voin seistä toisen ihmisen vieressä ja nähdä samat asiat kuin hän, mutta en välttämättä ymmärrä miten hän näkee nämä asiat. Kuva lisää jotain olennaista tähän suhteeseen. Kun kuva toimii niin kun sen kuuluu toimia, se näyttää myös miten toinen näkee, tällä tavalla kuvasta tulee välittäjä. Tämä väitöskirja yhdistää epistemologiaa, tieteen historiaa ja visuaalisen kulttuurin tutkimusta, mutta sen pääasiallinen tavoite on filosofinen. Se käsittelee filosofisia väärinkäsityksiä koskien kuvan eideettisyyttä.

The multicultural moment : the history of the idea and politics of multiculturalism in Sweden in comparative, transnational and biographical context, 1964–1975

The emergence of the idea of multiculturalism in Swedish public discourse and social science in the latter half of the 1960s and introduction of official multiculturalism in 1975 constituted a major intellectual and political shift in the post-war history of Sweden. The ambition of the 1975 immigrant and minority policy to enable the preservation of ethno-cultural minorities and to create a positive attitude towards the new multicultural society among the majority population was also incorporated into Swedish cultural, educational and media policies. The rejection of assimilationism and the new commitment to ethno-cultural diversity, the multicultural moment, has earned Sweden a place on the list of the early adopters of official multiculturalism, together with Canada and Australia. This compilation thesis examines the origins and early post-war history of the idea of multiculturalism as well as the interplay between idea and politics in the shift from a public ideal of homogeneity to an ideal of multiculturalism in Sweden. It does so from a range of conceptual, comparative, transnational, and biographical perspectives. The thesis consists of an introduction (Part I) and four previously published studies (Part II). The primary research result of the thesis concerns the agency involved in the break-through and formal establishment of the idea of multiculturalism in Sweden. Actors such as ethnic activists, experts and officials were instrumental in the introduction and establishment of multiculturalism in Sweden, as they also had been in Canada and in Australia. These actors have, however, not previously been recognized and analysed as significant idea-makers and political agents in the case of Sweden. The intertwined connections between activists, social scientists, linguists, and officials facilitated the transfer of the idea of multiculturalism from a publically contested idea to public policy via the way of The Swedish Trade Union Confederation, academia and the Royal Commission of Immigration. The thesis furthermore shows that the political success of the idea of multiculturalism, such as it was within the limits of the universalist social democratic welfare state, was dependent on whom the claims-makers were, the status and positions they held, and the way the idea of multiculturalism was conceptualised and used. It was also dependent on the migratory context of labour immigration in the 1960s and 1970s and on whose behalf the advocates of multiculturalism made their claims. The majority of the labour immigrants were Finnish citizens from the former eastern half of the kingdom of Sweden who were net contributors to the Swedish welfare state. This facilitated the recognition of their ethno-cultural difference, and, following the logic of universalism, the ethno-cultural difference of other minority groups in Sweden. The historical significance of the multicultural moment is still evident in the contemporary immigration and integration policies of Sweden. The affirmation of diversity continues to set Sweden apart from the rest of Europe, now more so than in the 1970s, even though the migratory context has changed radically in the last 40 years.

JNK regulates dendrite and spine architecture in the central nervous system influencing spatial learning and motor tasks

JNK1 is a MAP-kinase that has proven a significant player in the central nervous system. It regulates brain development and the maintenance of dendrites and axons. Several novel phosphorylation targets of JNK1 were identified in a screen performed in the Coffey lab. These proteins were mainly involved in the regulation of neuronal cytoskeleton, influencing the dynamics and stability of microtubules and actin. These structural proteins form the dynamic backbone for the elaborate architecture of the dendritic tree of a neuron. The initiation and branching of the dendrites requires a dynamic interplay between the cytoskeletal building blocks. Both microtubules and actin are decorated by associated proteins which regulate their dynamics. The dendrite-specific, high molecular weight microtubule associated protein 2 (MAP2) is an abundant protein in the brain, the binding of which stabilizes microtubules and influences their bundling. Its expression in non-neuronal cells induces the formation of neurite-like processes from the cell body, and its function is highly regulated by phosphorylation. JNK1 was shown to phosphorylate the proline-rich domain of MAP2 in vivo in a previous study performed in the group. Here we verify three threonine residues (T1619, T1622 and T1625) as JNK1 targets, the phosphorylation of which increases the binding of MAP2 to microtubules. This binding stabilizes the microtubules and increases process formation in non-neuronal cells. Phosphorylation-site mutants were engineered in the lab. The non-phosphorylatable mutant of MAP2 (MAP2- T1619A, T1622A, T1625A) in these residues fails to bind microtubules, while the pseudo-phosphorylated form, MAP2- T1619D, T1622D, Thr1625D, efficiently binds and induces process formation even without the presence of active JNK1. Ectopic expression of the MAP2- T1619D, T1622D, Thr1625D in vivo in mouse brain led to a striking increase in the branching of cortical layer 2/3 (L2/3) pyramidal neurons, compared to MAP2-WT. The dendritic complexity defines the receptive field of a neuron and dictates the output to the postsynaptic cells. Previous studies in the group indicated altered dendrite architecture of the pyramidal neurons in the Jnk1-/- mouse motor cortex. Here, we used Lucifer Yellow loading and Sholl analysis of neurons in order to study the dendritic branching in more detail. We report a striking, opposing effect in the absence of Jnk1 in the cortical layers 2/3 and 5 of the primary motor cortex. The basal dendrites of pyramidal neurons close to the pial surface at L2/3 show a reduced complexity. In contrast, the L5 neurons, which receive massive input from the L2/3 neurons, show greatly increased branching. Another novel substrate identified for JNK1 was MARCKSL1, a protein that regulates actin dynamics. It is highly expressed in neurons, but also in various cancer tissues. Three phosphorylation target residues for JNK1 were identified, and it was demonstrated that their phosphorylation reduces actin turnover and retards migration of these cells. Actin is the main cytoskeletal component in dendritic spines, the site of most excitatory synapses in pyramidal neurons. The density and gross morphology of the Lucifer Yellow filled dendrites were characterized and we show reduced density and altered morphology of spines in the motor cortex and in the hippocampal area CA3. The dynamic dendritic spines are widely considered to function as the cellular correlate during learning. We used a Morris water maze to test spatial memory. Here, the wild-type mice outperformed the knock-out mice during the acquisition phase of the experiment indicating impaired special memory. The L5 pyramidal neurons of the motor cortex project to the spinal cord and regulate the movement of distinct muscle groups. Thus the altered dendrite morphology in the motor cortex was expected to have an effect on the input-output balance in the signaling from the cortex to the lower motor circuits. A battery of behavioral tests were conducted for the wild-type and Jnk1-/- mice, and the knock-outs performed poorly compared to wild-type mice in tests assessing balance and fine motor movements. This study expands our knowledge of JNK1 as an important regulator of the dendritic fields of neurons and their manifestations in behavior.

Surface studies of limestones and dolostones : characterisation using various techniques and batch dissolution experiments with hydrochloric acid solutions

In this thesis, stepwise titration with hydrochloric acid was used to obtain chemical reactivities and dissolution rates of ground limestones and dolostones of varying geological backgrounds (sedimentary, metamorphic or magmatic). Two different ways of conducting the calculations were used: 1) a first order mathematical model was used to calculate extrapolated initial reactivities (and dissolution rates) at pH 4, and 2) a second order mathematical model was used to acquire integrated mean specific chemical reaction constants (and dissolution rates) at pH 5. The calculations of the reactivities and dissolution rates were based on rate of change of pH and particle size distributions of the sample powders obtained by laser diffraction. The initial dissolution rates at pH 4 were repeatedly higher than previously reported literature values, whereas the dissolution rates at pH 5 were consistent with former observations. Reactivities and dissolution rates varied substantially for dolostones, whereas for limestones and calcareous rocks, the variation can be primarily explained by relatively large sample standard deviations. A list of the dolostone samples in a decreasing order of initial reactivity at pH 4 is: 1) metamorphic dolostones with calcite/dolomite ratio higher than about 6% 2) sedimentary dolostones without calcite 3) metamorphic dolostones with calcite/dolomite ratio lower than about 6% The reactivities and dissolution rates were accompanied by a wide range of experimental techniques to characterise the samples, to reveal how different rocks changed during the dissolution process, and to find out which factors had an influence on their chemical reactivities. An emphasis was put on chemical and morphological changes taking place at the surfaces of the particles via X-ray Photoelectron Spectroscopy (XPS) and Scanning Electron Microscopy (SEM). Supporting chemical information was obtained with X-Ray Fluorescence (XRF) measurements of the samples, and Inductively Coupled Plasma-Mass Spectrometry (ICP-MS) and Inductively Coupled Plasma-Optical Emission Spectrometry (ICP-OES) measurements of the solutions used in the reactivity experiments. Information on mineral (modal) compositions and their occurrence was provided by X-Ray Diffraction (XRD), Energy Dispersive X-ray analysis (EDX) and studying thin sections with a petrographic microscope. BET (Brunauer, Emmet, Teller) surface areas were determined from nitrogen physisorption data. Factors increasing chemical reactivity of dolostones and calcareous rocks were found to be sedimentary origin, higher calcite concentration and smaller quartz concentration. Also, it is assumed that finer grain size and larger BET surface areas increase the reactivity although no certain correlation was found in this thesis. Atomic concentrations did not correlate with the reactivities. Sedimentary dolostones, unlike metamorphic ones, were found to have porous surface structures after dissolution. In addition, conventional (XPS) and synchrotron based (HRXPS) X-ray Photoelectron Spectroscopy were used to study bonding environments on calcite and dolomite surfaces. Both samples are insulators, which is why neutralisation measures such as electron flood gun and a conductive mask were used. Surface core level shifts of 0.7 ± 0.1 eV for Ca 2p spectrum of calcite and 0.75 ± 0.05 eV for Mg 2p and Ca 3s spectra of dolomite were obtained. Some satellite features of Ca 2p, C 1s and O 1s spectra have been suggested to be bulk plasmons. The origin of carbide bonds was suggested to be beam assisted interaction with hydrocarbons found on the surface. The results presented in this thesis are of particular importance for choosing raw materials for wet Flue Gas Desulphurisation (FGD) and construction industry. Wet FGD benefits from high reactivity, whereas construction industry can take advantage of slow reactivity of carbonate rocks often used in the facades of fine buildings. Information on chemical bonding environments may help to create more accurate models for water-rock interactions of carbonates.

Functional cellulose microspheres for pharmaceutical applications

Dissolving cellulose is the first main step in preparing novel cellulosicmaterials. Since cellulosic fibres cannot be easily dissolved in water-based solvents, fibres were pretreated with ethanol-acid solution prior to the dissolution. Solubility and changes on the surface of the fibres were studied with microscopy and capillary viscometry. After the treatment, the cellulose fibres were soluble in alkaline urea-water solvent. The nature of this viscous solution was studied rheologically. Cellulose microspheres were prepared by extruding the alkaline cellulose solution through the needle into an acidic medium. By altering the temperature and acidity of the mediumit was possible to adjust the specific surface area and pore sizes of themicrospheres. A typical skin-core structure was found in all samples. Microspheres were oxidised in order to introduce anionic carboxylic acid groups (AGs). Anionic microspheres are more hydrophilic; their water-uptake increased 25 times after oxidation and they could swell almost to their original state (88%) after drying and shrinking. Swelling was studied in simulated physiological environments, corresponding to stomach acid and intestines (pH 1.2-7.4). Oxidised microspheres were used as a drug carriers. They demonstrated a highmass uniformity, which would enable their use for personalised dosing among different patients, including children. The drug was solidified in microspheres in amorphous form. This enhanced solubility and could be used for more challenging drugs with poor solubility. The pores of themicrospheres also remained open after the drug was loaded and they were dried. Regardless of the swelling, the drug was released at a constant rate in all environments.

Rigorous development of safety-critical systems

Nowadays, computer-based systems tend to become more complex and control increasingly critical functions affecting different areas of human activities. Failures of such systems might result in loss of human lives as well as significant damage to the environment. Therefore, their safety needs to be ensured. However, the development of safety-critical systems is not a trivial exercise. Hence, to preclude design faults and guarantee the desired behaviour, different industrial standards prescribe the use of rigorous techniques for development and verification of such systems. The more critical the system is, the more rigorous approach should be undertaken. To ensure safety of a critical computer-based system, satisfaction of the safety requirements imposed on this system should be demonstrated. This task involves a number of activities. In particular, a set of the safety requirements is usually derived by conducting various safety analysis techniques. Strong assurance that the system satisfies the safety requirements can be provided by formal methods, i.e., mathematically-based techniques. At the same time, the evidence that the system under consideration meets the imposed safety requirements might be demonstrated by constructing safety cases. However, the overall safety assurance process of critical computerbased systems remains insufficiently defined due to the following reasons. Firstly, there are semantic differences between safety requirements and formal models. Informally represented safety requirements should be translated into the underlying formal language to enable further veri cation. Secondly, the development of formal models of complex systems can be labour-intensive and time consuming. Thirdly, there are only a few well-defined methods for integration of formal verification results into safety cases. This thesis proposes an integrated approach to the rigorous development and verification of safety-critical systems that (1) facilitates elicitation of safety requirements and their incorporation into formal models, (2) simplifies formal modelling and verification by proposing specification and refinement patterns, and (3) assists in the construction of safety cases from the artefacts generated by formal reasoning. Our chosen formal framework is Event-B. It allows us to tackle the complexity of safety-critical systems as well as to structure safety requirements by applying abstraction and stepwise refinement. The Rodin platform, a tool supporting Event-B, assists in automatic model transformations and proof-based verification of the desired system properties. The proposed approach has been validated by several case studies from different application domains.

Interfacial effects in organic solar cells

Solceller baserade på organiska halvledare erbjuder en möjlighet till storskalig och billig solenergiproduktion. Organiska halvledare har den fördelen att de är lösningsprocesserbara vilket gör att solceller och andra elektroniska komponenter baserade på dessa halvledare kan tillverkas vid låga temperaturer och med liten energiförbrukning. Nackdelen med dessa material är deras strukturella och energetiska oordning som leder till lägre effektivitet. För att organiska solceller ska kunna kommersialiseras krävs grundläggande insikter i de olika processer som begränsar effektiviteten. En stor del av forskningen om dessa processer har varit fokuserad kring egenskaperna av solcellens olika komponenter (de aktiva materialen) som sådana, medan gränsytorna mellan olika material har fått mindre uppmärksamhet. Gränsytor mellan olika material har distinkt olika egenskaper jämfört med ett rent material, och gränsytors olika egenskaper kan ha en väldigt stor inverkan på hur solcellerna fungerar. Syftet med denna avhandling är att klargöra några olika gränsyterelaterade effekter i organiska dioder och solceller. De gränsytor som behandlas är gränsytan mellan kontakten och det aktiva lagret (metall-organisk) och gränsytan mellan donor och acceptor (organisk-organisk). Resultaten visar att metall-organiska gränsytor måste designas noggrant för att begränsa förlust av effektivitet. En icke-idealisk kontakt leder till starkt reducerad effektivitet på grund av att elektronerna extraheras ineffektivt. Även till synes idealiska kontakter kan orsaka förluster genom spontan laddningsöverföring från metallen till det organiska lagret som effektivt sett minskar på den spänning som cellen kan alstra. Den organisk-organiska gränsytan påverkar hur mycket ström cellen kan alstra och beroende på gränsytans beskaffenhet kan de negativa rekombinationsprocesserna i materialet kontrolleras. ------------------------------------------------- Orgaanisille puolijohteille perustuvat aurinkokennot mahdollistavat suurimuotoisen ja edullisen aurinkoenergiatuotannon. Orgaanisten puolijohteiden etu on että ne voidaan liuottaa, jolloin aurinkokennot ja muut näille johteille perustuvat elektroniset komponentit voidaan valmistaa alhaisessa lämpötilassa kuluttaen vähän energiaa. Materiaalien huonona puolena on kuitenkin niiden rakenteellinen ja energeettinen epäjärjestys, jonka seurauksena niiden tehokkuus on huonompi. Orgaanisten aurinkokennojen kaupallistaminen edellyttää perustavanlaatuista ymmärystä tehokkuutta rajoittavista prosesseista. Aurinkokennotutkimus on pääosin keskittynyt aurinkokennon eri komponenttien (aktiivisten materiaalien) ominaisuuksiin, kun taas eri materiaalien rajapinnat ovat jääneet vähemmälle huomiolle. Eri materiaalien välisillä rajapinnoilla on huomattavan erilaisia ominaisuuksia verrattuna puhtaisiin materiaaleihin. Rajapintojen ominaisuudet voivat kuitenkin vaikuttaa merkittävästi aurinkokennojen toimintaan. Tämän väitöstutkimuksen tarkoituksena on selventää joitain rajapintoihin liittyviä toimintoja orgaanisissa diodeissa ja aurinkokennoissa. Käsiteltävät rajapinnat ovat rajapinta kontaktin ja aktiivisen kerroksen välillä (metallis-orgaaninen) ja rajapinta donorin ja akseptorin välillä (orgaanis-orgaaninen). Tutkimustulokset osoittavat, että metallis-orgaaniset rajapinnat tulee suunnitella huolellisesti, jotta tehokkuuden alenemista voidaan rajoittaa. Mikäli kontakti ei ole ideaalisti suunniteltu, vähenee tehokkuus huomattavasti, mikä johtuu elektronien tehottomasta ekstrahoinnista. Jopa ideaalisilta vaikuttavat kontaktit voivat johtaa tehokkuuden alenemiseen, mikäli varaus siirtyy spontaanisti metallista orgaaniseen kerrokseen, sillä tämä alentaa jännitettä jonka kenno voi tuottaa. Kennon orgaanis-orgaaninen rajapinta vaikuttaa siihen, kuinka paljon virtaa kenno pystyy tuottamaan. Rajapinnan ominaisuuksista riippuen materiaalin rekombinaatio on hallittavissa.