Morphological and physiological alterations induced by lactofen in soybean leaves are reduced with nitric oxide

Lactofen is a diphenylether herbicide recommended to control broad-leaved weeds in soybean (Glycine max) fields and its mechanism of action is the inhibition of protoporphyrinogen-IX oxidase (Protox), which acts in the chlorophyll biosynthesis. This inhibition results in an accumulation of protoporphyrin-IX, which leads to the production of reactive oxygen species (ROS) that cause oxidative stress. Consequently, spots, wrinkling and leaf burn may occur, resulting in a transitory crop growth interruption. However, nitric oxide (NO) acts as an antioxidant in direct ROS scavenging. Thus, the aim of this work was to verify, through phytometric and biochemical evaluations, the protective effect of NO in soybean plants treated with the herbicide lactofen. Soybean plants were pre-treated with different levels of sodium nitroprusside (SNP), a NO-donor substance, and then sprayed with 168 g a.i. ha-1 lactofen. Pre-treatment with SNP was beneficial because NO decreased the injury symptoms caused by lactofen in young leaflets and kept low the soluble sugar levels. Nevertheless, NO caused slower plant growth, which indicates that further studies are needed in order to elucidate the action mechanisms of NO in signaling the stress caused by lactofen in soybean crop.

Optimizing activity of herbicides at reduced rate on Emex spinosa campd. with adjuvants

In pot experiments, two adjuvants were evaluated for their efficacy in enhancing activity of five herbicides applied at reduced rates (75% of the recommended rates) on Emex spinosa at the cotyledon-leaf and at the two- to four- leaf stage. Herbicides (at recommended rates) including fluroxypyr+MCPA at 450 g a.i. ha-1, carfentrazone-ethyl at 20 g a.i. ha-1, bromoxynil+MCPA at 450 g a.i. ha-1, thifensulfuron-methyl at 75 g a.i. ha-1 and tribenuronmethyl at 75 g a.i. ha-1 alone and tank mixed at reduced rates with adjuvants, namely, alkyl ether sulphate sodium salt at 625 mL ha-1 or fatty alcohol ethoxylate at 375 mL ha-1. Addition of the adjuvants to reduced rates of fluroxypyr+MCPA and carfentrazone-ethyl, increased their efficacy with 100% mortality and biomass reduction of E. spinosa at the cotyledon- leaf stage and at the two- to four- leaf stage which was similar to their recommended rates without the adjuvants except for carfentrazone-ethyl at a reduced rate without adjuvants at the two- to four- leaf stage. Bromoxynil+MCPA at reduced rates with alkyl ether sulphate sodium salt also gave 100% control of E. spinosa over weedy check at the two- to four- leaf stage. Both the adjuvants generally increased the efficacy of tribenuron-methyl at reduced rates when sprayed at both leaf stages. These findings suggest that the use of adjuvants may increase the efficacy of the above mentioned herbicides against E. spinosa and it may be incorporated in an integrated weed management program.

Efficiency of a reduced herbicide rate for Brachiaria brizantha control in sugarcane

At different growth stages, weeds present different sensitivities to herbicides. Thus, the registered herbicide rate may be reduced under specific conditions, while maintaining satisfactory weed control. This study evaluated the efficiency of reduced rates of the formulated herbicide mixture Velpar K WG® (hexazinone + diuron) + Volcane® (MSMA) for Brachiaria brizantha control at different growth stages. Optimum weed control efficiency was obtained when applying 50% of the recommended rate in younger plants (plants with one to four leaves). In late applications, it is necessary to increase the herbicide rates and, under these conditions, 90% of the recommended rate for (diuron + hexazinone) + MSMA was estimated to be the most economical one.

Exploring Herbicidal Potential of Aqueous Extracts of Some Herbaceous Plants Against Parthenium Weed

To assess the phytotoxic potential of Achyranthes aspera, Alternanthera philoxeroides, Datura metel and Rumex dentatus against Parthenium hysterophorus, 5% (w/v on dry weight basis) aqueous extracts from root, stem, leaf, flower and whole plant were tested through a Petri plate-based germination and pot-cultured seedling bioassays. Achyranthes aspera and A. philoxeroides inhibited parthenium weed germination more than extracts from other species. Whole plant, leaf and fruit extracts of A. aspera reduced the germination percentage (5%); leaf extract from A. philoxeroides caused lower germination index (0.4), higher mean germination time (14 d) and longer time to 50% germination (13.5 d) of parthenium weed. In the foliar spray bioassay, A. aspera reduced parthenium weed shoot growth more than the other species whereas R. dentatus caused more reduction in root growth. Whole plant extract from A. aspera caused maximum reduction in parthenium weed seedling vigor index (98%) and seedling biomass (96%). The aqueous extracts of A. aspera and A. philoxeroides contained higher concentrations of phenolics viz. gallic (16.9 mg L-1), caffeic (7.4 mg L-1), chromatotropic (63.8 mg L-1), p-coumaric (10.5 mg L-1), m-coumaric (3.1 mg L-1), syringic (9.21 mg L-1) and 4 hydroxy-3-methoxy benzoic (118.6 mg L-1) acids compared with extracts of the other two species tested.

Molecular Basis for Resistance to Fluazifop-P-Butyl in Itchgrass (Rottboellia cochinchinensis) from Costa Rica

Rottboellia cochinchinensis is an annual grass weed species known as itchgrass, or "caminadora" in America´s Spanish speaking countries, and has become a major and troublesome weed in several crops. The application of fluazifop-P-butyl at recommended rates (125 g a.i. ha-1) was observed to be failing to control itchgrass in a field in San José, Upala county, Alajuela province, Costa Rica. Plants from the putative resistant R. cochinchinensis population survived fluazifop-P-butyl when treated with 250 g a.i. ha-1 (2X label rate) at the three- to four-leaf stage under greenhouse conditions. PCR amplification and sequencing of partial carboxyl transferase domain (CT) of the acetyl-CoA carboxylase (ACCase) gene were used to determine the molecular mechanism of resistance. A single non-synonymous point mutation from TGG (susceptible plants) to TGC (putative resistant plants) that leads to a Trp-2027-Cys substitution was found. This Trp-2027-Cys mutation is known to confer resistance to all aryloxyphenoxyproprionate (APP) herbicides to which fluazifop-P-butyl belongs. To the best of our knowledge, this is the first report of fluazifop-P-butyl resistance and a mutation at position 2027 for a Costa Rican R. cochinchinensis population.

Siiderin ja long drink -juomien sekoitusprosessin kehittäminen

Diplomityössä perehdytään Hartwall Lahden tuotantolaitoksen juomanvalmistuksen osaston siiderin ja long drink –juomien valmistusprosessin kehittämiseen. Diplomityön tavoitteena oli löytää prosessin ongelma- ja poikkeamakohtia, tutkia mahdollisia hävikkikohteita ja suorittaa laadun osalta ajoseurantamittauksia. Ongelmakohtien pohjalta laadittiin parannusehdotuksia ja niitä toteutettiin jo tämän projektin aikana. Ongelma- ja poikkeamakohtia tutkittiin ajoprosessin aikana. Hävikkitutkimus kohdennettiin aromiliuoksen annostelulinjaan, nestesokerin an-nostelulinjaan ja tuotteiden alku- ja lopputyönnöille painetankkeihin. Painetankkien osalta mahdollisia hävikkikohteita tutkittiin kokeellisen toiminnan avulla ajo-prosessin aikana. Ajoprosessin käynnistyksen jälkeen selvitettiin milloin valmis tuote on painetankkien venttiilimatriisilla. Uudet parametrit alku- ja lopputyönnöille määritettiin tuoteputken, painetankkien pohjaputkien ja venttiilimatriisin tilavuuksien avulla. Hävikkitutkimuksen tuloksena saatiin pienennettyä hävikkiä ja näin ollen syntyi kustannussäästöjä. Hiilidioksidin sitoutuvuutta tutkittiin mittauksien avulla valmistusprosessin aikana. Mittauksien perusteella havaittiin, että hiilidioksidipitoisuus laskee painetankissa. Tämä johtuu valmiin tuotteen lämpötilamuutoksista. Tuotteen lämpötilaa voidaan tasata esimerkiksi levylämmönvaihtimen avulla.

Anaesthesia and Pain Management for Use in Orthopaedic Day Surgery

Day surgery has gained a large popularity during the last decades. In Finland, 57% of the elective procedures, and 50% at Turku University Hospital, were already conducted on day basis during 2012. The steady growth of day surgery is mostly due to an increased safety in perioperative care and cost-effectiveness. The development of surgical techniques and anaesthetic methods has advanced the modern day surgery and extended the repertory of the procedures for use in day surgery operations. Day surgery also offers certain benefits like reduced risk for hospital-related infections, stress and confusion. Patient satisfaction, regarding several issues, is high. Most concerns and complaints are related to postoperative pain, nausea and vomiting pain and nausea. Pain can hamper recovery and pain management is a crucial factor for hospital discharge. Appropriate pain treatment is effective, safe, easy and economical. A procedure-specific approach and an individually planned, multimodal analgesia should be the basis of modern pain management. The main aim of this thesis was to evaluate the effectiveness and safety of anaesthetic technique and methods in pain treatment of orthopaedic day case surgery, and following conclusions were made. Unilateral spinal block was achieved using hyperbaric bupivacaine with a small dose of clonidine but clonidine prolonged the block. Continuous subacromial bupivacaine was found to be safe but conferring only moderate efficacy in pain care after shoulder arthroscopy. Transdermal fentanyl, 12 g/h, as part of multimodal analgesia, offered a safe and easy option to pain management in this patient group. However, after forefoot surgery, it did not reduce pain any further. In general, pain scores in all patient groups were low and the need for rescue opioid moderate.

One-winged Drosophila subobscura: a phenotype with an obscure genetic basis

A line of one-winged Drosophila subobscura was studied. The absent wing is substituted by a bulky structure with macro and microchaetes, showing a thoracic appearance. Genetic crosses showed that there is no way to select for the trait by simple crossing. The number of one-winged flies in the various generations was always low. In one case a wingless fly was also obtained. The trait presents an unknown genetic pattern.

The yellow fever 17D vaccine virus: molecular basis of viral attenuation and its use as an expression vector

The yellow fever (YF) virus is the prototype flavivirus. The use of molecular techniques has unraveled the basic mechanisms of viral genome structure and expression. Recent trends in flavivirus research include the use of infectious clone technology with which it is possible to recover virus from cloned cDNA. Using this technique, mutations can be introduced at any point of the viral genome and their resulting effect on virus phenotype can be assessed. This approach has opened new possibilities to study several biological viral features with special emphasis on the issue of virulence/attenuation of the YF virus. The feasibility of using YF virus 17D vaccine strain, for which infectious cDNA is available, as a vector for the expression of heterologous antigens is reviewed

Myocyte necrosis is the basis for fibrosis in renovascular hypertensive rats

The pathogenesis of fibrosis and the functional features of pressure overload myocardial hypertrophy are still controversial. The objectives of the present study were to evaluate the function and morphology of the hypertrophied myocardium in renovascular hypertensive (RHT) rats. Male Wistar rats were sacrificed at week 4 (RHT4) and 8 (RHT8) after unilateral renal ischemia (Goldblatt II hypertension model). Normotensive rats were used as controls. Myocardial function was analyzed in isolated papillary muscle preparations, morphological features were defined by light microscopy, and myocardial hydroxyproline concentration (HOP) was determined by spectrophotometry. Renal artery clipping resulted in elevated systolic arterial pressure (RHT4: 178 ± 19 mmHg and RHT8: 194 ± 24 mmHg, P<0.05 vs control: 123 ± 7 mmHg). Myocardial hypertrophy was observed in both renovascular hypertensive groups. The myocardial HOP concentration was increased in the RHT8 group (control: 2.93 ± 0.38 µg/mg; RHT4: 3.02 ± 0.40 µg/mg; RHT8: 3.44 ± 0.45 µg/mg of dry tissue, P<0.05 vs control and RHT4 groups). The morphological study demonstrated myocyte necrosis, vascular damage and cellular inflammatory response throughout the experimental period. The increased cellularity was more intense in the adventitia of the arterioles. As a consequence of myocyte necrosis, there was an early, local, conjunctive stroma collapse with disarray and thickening of the argyrophilic interstitial fibers, followed by scarring. The functional data showed an increased passive myocardial stiffness in the RHT4 group. We conclude that renovascular hypertension induces myocyte and arteriole necrosis. Reparative fibrosis occurred as a consequence of the inflammatory response to necrosis. The mechanical behavior of the isolated papillary muscle was normal, except for an early increased myocardial passive stiffness

Structural basis for the pathophysiology of lipoprotein(a) in the athero-thrombotic process

Lipoprotein Lp(a) is a major and independent genetic risk factor for atherosclerosis and cardiovascular disease. The essential difference between Lp(a) and low density lipoproteins (LDL) is apolipoprotein apo(a), a glycoprotein structurally similar to plasminogen, the precursor of plasmin, the fibrinolytic enzyme. This structural homology endows Lp(a) with the capacity to bind to fibrin and to membrane proteins of endothelial cells and monocytes, and thereby to inhibit plasminogen binding and plasmin generation. The inhibition of plasmin generation and the accumulation of Lp(a) on the surface of fibrin and cell membranes favor fibrin and cholesterol deposition at sites of vascular injury. Moreover, insufficient activation of TGF-ß due to low plasmin activity may result in migration and proliferation of smooth muscle cells into the vascular intima. These mechanisms may constitute the basis of the athero-thrombogenic mode of action of Lp(a). It is currently accepted that this effect of Lp(a) is linked to its concentration in plasma. An inverse relationship between Lp(a) concentration and apo(a) isoform size, which is under genetic control, has been documented. Recently, it has been shown that inhibition of plasminogen binding to fibrin by apo(a) is also inversely associated with isoform size. Specific point mutations may also affect the lysine-binding function of apo(a). These results support the existence of functional heterogeneity in apolipoprotein(a) isoforms and suggest that the predictive value of Lp(a) as a risk factor for vascular occlusive disease would depend on the relative concentration of the isoform with the highest affinity for fibrin

Behavior of black liquor nitrogen in combustion : formation of cyanate

The Kraft pulping process is the dominant chemical pulping process in the world. Roughly 195 million metric tons of black liquor are produced annually as a by-product from the Kraft pulping process. Black liquor consists of spent cooking chemicals and dissolved organics from the wood and can contain up to 0.15 wt% nitrogen on dry solids basis. The cooking chemicals from black liquor are recovered in a chemical recovery cycle. Water is evaporated in the first stage of the chemical recovery cycle, so the black liquor has a dry solids content of 65-85% prior to combustion. During combustion of black liquor, a portion of the black liquor nitrogen is volatilized, finally forming N2 or NO. The rest of the nitrogen remains in the char as char nitrogen. During char conversion, fixed carbon is burned off leaving the pulping chemicals as smelt, and the char nitrogen forms mostly smelt nitrogen (cyanate, OCN-). Smelt exits the recovery boiler and is dissolved in water. The cyanate from smelt decomposes in the presence of water, forming NH3, which causes nitrogen emissions from the rest of the chemical recovery cycle. This thesis had two focuses: firstly, to determine how the nitrogen chemistry in the recovery boiler is affected by modification of black liquor; and secondly, to find out what causes cyanate formation during thermal conversion, and which parameters affect cyanate formation and decomposition during thermal conversion of black liquor. The fate of added biosludge nitrogen in chemical recovery was determined in Paper I. The added biosludge increased the nitrogen content of black liquor. At the pulp mill, the added biosludge did not increase the NO formation in the recovery boiler, but instead increased the amount of cyanate in green liquor. The increased cyanate caused more NH3 formation, which increased the NCG boiler’s NO emissions. Laboratory-scale experiments showed an increase in both NO and cyanate formation after biosludge addition. Black liquor can be modified, for example by addition of a solid biomass to increase the energy density of black liquor, or by separation of lignin from black liquor by precipitation. The precipitated lignin can be utilized in the production of green chemicals or as a fuel. In Papers II and III, laboratory-scale experiments were conducted to determine the impact of black liquor modification on NO and cyanate formation. Removal of lignin from black liquor reduced the nitrogen content of the black liquor. In most cases NO and cyanate formation decreased with increasing lignin removal; the exception was NO formation from lignin lean soda liquors. The addition of biomass to black liquor resulted in a higher nitrogen content fuel mixture, due to the higher nitrogen content of biomass compared to black liquor. More NO and cyanate were formed from the fuel mixtures than from pure black liquor. The increased amount of formed cyanate led to the hypothesis that black liquor is catalytically active and converts a portion of the nitrogen in the mixed fuel to cyanate. The mechanism behind cyanate formation during thermal conversion of black liquor was not clear before this thesis. Paper IV studies the cyanate formation of alkali metal loaded fuels during gasification in a CO2 atmosphere. The salts K2CO3, Na2CO3, and K2SO4 all promoted char nitrogen to cyanate conversion during gasification, while KCl and CaCO3 did not. It is now assumed that cyanate is formed when alkali metal carbonate or an active intermediate of alkali metal carbonate (e.g. -CO2K) reacts with the char nitrogen forming cyanate. By testing different fuels (bark, peat, and coal), each of which had a different form of organic nitrogen, it was concluded that the form of organic nitrogen in char also has an impact on cyanate formation. Cyanate can be formed during pyrolysis of black liquor, but at temperatures 900°C or above, the formed cyanate will decompose. Cyanate formation in gasifying conditions with different levels of CO2 in the atmosphere was also studied. Most of the char nitrogen was converted to cyanate during gasification at 800-900°C in 13-50% CO2 in N2, and only 5% of the initial fuel nitrogen was converted to NO during char conversion. The formed smelt cyanate was stable at 800°C 13% CO2, while it decomposed at 900°C 13% CO2. The cyanate decomposition was faster at higher temperatures and in oxygen-containing atmospheres than in an inert atmosphere. The presence of CO2 in oxygencontaining atmospheres slowed down the decomposition of cyanate. This work will provide new information on how modification of black liquor affects the nitrogen chemistry during thermal conversion of black liquor and what causes cyanate formation during thermal conversion of black liquor. The formation and decomposition of cyanate was studied in order to provide new data, which would be useful in modeling of nitrogen chemistry in the recovery boiler.

Reduced bone mineral density in men after heart transplantation

Heart transplantation is associated with rapid bone loss and an increased prevalence and incidence of fractures. The aim of the present study was to compare the bone mineral density (BMD) of 30 heart transplant (HT) recipients to that of 31 chronic heart failure (CHF) patients waiting for transplantation and to determine their biochemical markers of bone resorption and hormone levels. The BMD of lumbar spine and proximal femur was determined by dual-energy X-ray absorptiometry. Anteroposterior and lateral radiographs of the thoracic and lumbar spine were also obtained. The mean age of the two groups did not differ significantly. Mean time of transplantation was 25.4 ± 21.1 months (6 to 88 months). Except for the albumin levels, which were significantly higher, and magnesium levels, which were significantly lower in HT patients when compared to CHF patients, all other biochemical parameters and hormone levels were within the normal range and similar in the two groups. Both groups had lower BMD of the spine and proximal femur compared to young healthy adults. However, the mean BMD of HT patients was significantly lower than in CHF patients at all sites studied. Bone mass did not correlate with time after transplantation or cumulative dose of cyclosporine A. There was a negative correlation between BMD and the cumulative dose of prednisone. These data suggest that bone loss occurs in HT patients mainly due to the use of corticosteroids and that in 30% of the patients it can be present before transplantation. It seems that cyclosporine A may also play a role in this loss.