Co catalysts supported on SiO(2) and gamma-Al(2)O(3) applied to ethanol steam reforming: Effect of the solvent used in the catalyst preparation method

Cobalt catalysts were prepared on supports of SiO(2) and gamma-Al(2)O(3) by the impregnation method, using a solution of Co precursor in methanol. The samples were characterized by XRD, TPR, and Raman spectroscopy and tested in ethanol steam reforming. According to the XRD results, impregnation with the methanolic solution led to smaller metal crystallites than with aqueous solution, on the SiO(2) support. On gamma-Al(2)O(3), all the samples exhibited small crystallites, with either solvent, due to a higher Co-support interaction that inhibits the reduction of Co species. The TPR results were consistent with XRD results and the samples supported on gamma-Al(2)O(3) showed a lower degree of reduction. In the steam reforming of ethanol, catalysts supported on SiO(2) and prepared with the methanolic solution showed the best H(2), CO(2) and CO selectivity. Those supported on gamma-Al(2)O(3) showed lower H(2) selectivity. (C) 2011 Elsevier Ltd. All rights reserved.

Hydrogen purification for fuel cell using CuO/CeO(2)-Al(2)O(3) catalyst

CuO/CeO(2), CuO/Al(2)O(3) and CuO/CeO(2)-Al(2)O(3) catalysts, with CuO loading varying from 1 to 5 wt.%, were prepared by the citrate method and applied to the preferential oxidation of carbon monoxide in a reaction medium containing large amounts of hydrogen (PROX-CO). The compounds were characterized ex situ by X-ray diffraction, specific surface area measurements, temperature-programmed reduction and temperature-programmed reduction of oxidized surfaces; XANES-PROX in situ experiments were also carried out to study the copper oxidation state under PROX-CO conditions. These analyses showed that in the reaction medium the Cu(0) is present as dispersed particles. On the ceria, these metallic particles are smaller and more finely dispersed, resulting in a stronger metal-support interaction than in CuO/Al(2)O(3) or CuO/CeO(2)-Al(2)O(3) catalysts, providing higher PROX-CO activity and better selectivity in the conversion of CO to CO(2) despite the greater BET area presented by samples supported on alumina. It is also shown that the lower CuO content, the higher metal dispersion and consequently the catalytic activity. The redox properties of the ceria support also contributed to catalytic performance. (C) 2010 Elsevier B.V. All rights reserved.

Structural and electrochemical characteristics of Mg((55-x))Ti(x)Ni((45-y))Pt(y) metal hydride electrodes

In recent years, Mg-Ni-based metastable alloys have been attracting attention due to their large hydrogen sorption capacities, low weight, low cost, and high availability. Despite the large discharge capacity and high activity of these alloys, the accelerated degradation of the discharge capacity after only few cycles of charge and discharge is the main shortcoming against their commercial use in batteries. The addition of alloying elements showed to be an effective way of improving the electrode performance of Mg-Ni-based alloys. In the present work, the effect of Ti and Pt alloying elements on the structure and electrode performance of a binary Mg-Ni alloy was investigated. The XRD and HRTEM revealed that all the investigated alloy compositions had multi-phase nanostructures, with crystallite size in the range of 6 nm. Moreover, the investigated alloying elements demonstrated remarkable improvements of both maximum discharge capacity and cycling life. Simultaneous addition of Ti and Pd demonstrated a synergetic effect on the electrochemical properties of the alloy electrodes. Among the investigated alloys, the best electrochemical performance was obtained for the Mg(51)Ti(4)Ni(43)Pt(2) composition (in at.%), which achieved 448 mAh g(-1) of maximum discharge capacity and retained almost 66% of this capacity after 10 cycles. In contrast, the binary Mg(55)Ni(45) alloy achieved only 248 mAh g(-1) and retained 11% of this capacity after 10 cycles. (C) 2010 Elsevier By. All rights reserved.

Estrogen receptor: Structural differences and potential implications on selectivity examined by the GRID/CPCA approach

Selective Estrogen Receptor Modulators ( SERMs) have been developed, but the selectivity towards the subtypes ( ER or ER is not well understood. Based on three-dimensional structural properties of ligand binding domains, a model that takes into account this aspect was developed via molecular interaction fields and consensus principal component analysis (GRID/CPCA).

2D QSAR and similarity studies on cruzain inhibitors aimed at improving selectivity over cathepsin L

Hologram quantitative structure-activity relationships (HQSAR) were applied to a data set of 41 cruzain inhibitors. The best HQSAR model (Q(2) = 0.77; R-2 = 0.90) employing Surflex-Sim, as training and test sets generator, was obtained using atoms, bonds, and connections as fragment distinctions and 4-7 as fragment size. This model was then used to predict the potencies of 12 test set compounds, giving satisfactory predictive R-2 value of 0,88. The contribution maps obtained from the best HQSAR model are in agreement with the biological activities of the study compounds. The Trypanosoma cruzi cruzain shares high similarity with the mammalian homolog cathepsin L. The selectivity toward cruzam was checked by a database of 123 compounds, which corresponds to the 41 cruzain inhibitors used in the HQSAR model development plus 82 cathepsin L inhibitors. We screened these compounds by ROCS (Rapid Overlay of Chemical Structures), a Gaussian-shape volume overlap filter that can rapidly identify shapes that match the query molecule. Remarkably, ROCS was able to rank the first 37 hits as being only cruzain inhibitors. In addition, the area under the curve (AUC) obtained with ROCS was 0.96, indicating that the method was very efficient to distinguishing between cruzain and cathepsin L inhibitors. (c) 2007 Elsevier Ltd. All rights reserved.

Sheet Metal Department Sign

This is a black and white photograph of a sign for the Sheet Metal Department of the New York Trade School likely created by the department. It contains ornate metal work and displays the year 1938, probably the beginning year of the Sheet Metal Department.

Sheet Metal Department Students at Work

Students in the Sheet Metal Department at the New York Trade School are shown working on ductwork in a classroom at the school. Black and white photograph.

Sheet Metal Department

This is a view of a classroom in the Sheet Metal Department at the New York Trade School. Students are shown doing a variety of different tasks in the large room. Black and white photograph.

Sheet Metal Students at Work

A class of sheet metal students are shown working in this black and white photograph.

Nat Gold, Sheet Metal Graduate from the New York Trade School

Nat Gold graduated from the Sheet Metal program at the New York Trade School in 1942. He is represented here in the sheet metal shop he owns. Notice the blueprints for the White Plains Senior High School hanging on the wall behind him. Original caption reads, "Shop Owner, Brook Sheet Metal Inc. Nat Gold - Sheet Metal 1942, represents one of many Sheet Metal graduates who became owners of their own business." Black and white photograph.

Analys av förvridning vid hålning av rör : Analysis of metal torsion in rotary piercing

Hålningsprocessen är det inledande bearbetningssteget vid varmvalsning av sömlösa rör. Det är en tvärvalsningsprocess i vilken ett cylindriskt ämne valsas mellan två dubbelkoniska val¬sar över en plugg. Valsarna är snedställda med en viss mat¬ningsvinkel, vilken ger upphov till en axiell drivkraft genom ver¬ket. Hela denna pro¬cess är roterande. Detta i kombination med bl.a. de koniska valsarna leder till en förvrid¬ning av röret, dvs. en tänkt rak linje på det ingå¬ende äm¬net övergår till en spiral efter genomförd valsning. Med föreliggande uppgift är målet att studera förvridningen genom teoretisk och experimen¬tell analys. Syftet med detta är dels att få fördjupad kunskap inom området och dels att ut¬veckla en modell för pre¬diktering av förvridningen.Det experimentella arbetet är utfört på ett stål av typ Ovako 280 (SS2142). Denna mjuka stål¬sort valdes i syfte att undvika värmebehandling innan provberedning. För att visuali¬sera för¬vridningen fräs¬tes ett rakt spår längs det ingående äm¬net och hål borrades mot symmetrilinjen. De praktiska undersökningarna utfördes direkt i den löpande produktionen. Genomförda beräkningar uppvisar en längsgående förvridningsvinkel som stämmer väl över¬ens med uppmätt värde. Detta är dock under antagandet att den tangentiella hastighetskoeffi¬cienten varierar linjärt utmed deformationszonen. För en mer utvecklad modell krävs en nog¬grannare analys av kontakten mellan vals/ämne eller en grundligt genomförd uppmätning av ämnets vinkelhastighet.

Tribology in Metal Working

This thesis focuses on the tribological performance of tool surfaces in two steel working operations, namely wire drawing and hot rolling. In all forming operations dimensions and surface finish of the products are of utmost importance. Forming basically includes three parts – forming conditions excluded – that may be changed; work material, tool and (possibly) lubricant. In the interface between work material and tool, the conditions are very aggressive with – generally or locally – high temperatures and pressures. The surfaces will be worn in various ways and this will change the conditions in the process. Consequently, the surface finish as well as the dimensions of the formed product may change and in the end, the product will not fulfil the requirements of the customer. Therefore, research and development in regard to wear, and consequently tribology, of the forming tools is of great interest. The investigations of wire drawing dies focus on coating adhesion/cohesion, surface characteristics and material transfer onto the coated steel both in laboratory scale as well as in the wire drawing process. Results show that it in wire drawing is possible to enhance the tribological performance of drawing dies by using a lubricant together with a steel substrate coated by a polished, dual-layer coating containing both hard and friction-lowering layers. The investigations of hot rolling work rolls focus on microstructure and hardness as well as cracking- and surface characteristics in both laboratory scale and in the hot strip mill. Results show that an ideal hot work roll material should be made up of a matrix with high hardness and a large amount of complex, hard carbides evenly distributed in the microstructure. The surface failure mechanisms of work rolls are very complex involving plastic deformation, abrasive wear, adhesive wear, mechanical and thermal induced cracking, material transfer and oxidation. This knowledge may be used to develop new tools with higher wear resistance giving better performance, lower costs and lower environmental impact.

Att definiera och skilja på snarlika subgenrer : Tillämpat på death- och black metal

Det är svårt att sätta ord på vad man menar när man pratar om musik. Jag är intresserad av varför det sällan går att finna definitioner av genrer när diskussionen om dem är så stark, speciellt när det gäller snarlika genrer som troligtvis är uppdelade av en eller flera anledningar. Syftet med min undersökning är att utveckla vidare kunskap om vilken betydelse det har att skilja på två snarlika subgenrer inom samma metagenre. Jag undersöker därför hur två snarlika genrer definieras och jämför dem sedan och prövar om det är av betydelse att undersöka flera aspekter av en musikgenre. Tidigare forskning föreslår att den musikaliska stilen borde undersökas likväl som kulturen och andra aspekter. En stark diskussion pågår just inom heavy metalscenen om subgenrerna inom den, därför undersöker jag subgenrerna death- och black metal. I denna undersökning använder jag Fabbris mall för genredefinition, där undersöks formella och tekniska regler, semiotiska regler, regler för beteende, sociala och ideologiska regler samt ekonomiska och juridiska regler. Reglerna har jag undersökt genom att lyssna på fonogram, titta på videoinspelningar av liveframträdande och publik samt hur aktörer inom scenerna beter sig när de inte är på scen. Jag har även analyserat låttexter och använt mig av diverse litteratur och dokumentärfilmer. Mitt resultat visar att det finns betydande anledningar till att skilja på death metal och black metal trots att de musikaliskt liknar varandra.

Sons of Northern Darkness : En fråga om stil och identitet i Black Metal-kulturen

Min uppsats har visat på black metal-stilens betydelse för fyra ungdomars identitetsskapande. Jag har med koppling till teoretiska infallsvinkar och begrepp rörande stilars och kulturers betydelse diskuterat black metal-kulturen med fokus på dess stilmässiga uttryck, dess symbolanvändande och dess innebörd för ungdomarnas självbild.I min studie har jag diskuterat och redogjort för hur black metal-kulturen kan te sig genom att förklara hur musiken låter och hur stilens uttryck i form av kläder och frisyrer kan se ut. Uppsatsen har visat på hur symboler och kodsystem används av ungdomarna inom ramen för kulturen för att markera och positionera sin identitet. Jag har i min studie även visat hur black metal-stilen kan vara ett existentiellt ställningstagande mot kommersialism och mainstreamkultur.