Prevalence of Anxiety and Depression among Medical Students

ABSTRACT Background Medical students are a vulnerable population to develop depression and anxiety disorders. Objective To estimate the prevalence and associated factors of anxiety and depression among medical students. Methods A cross-sectional study with a random sample (n = 346) of medical students at a Brazilian university was performed. The Beck Depression Anxiety Inventory was used to measure anxiety and depression levels. Crude and adjusted analyses were performed using Poisson regression. Results The prevalence of anxiety was 35.5% and depression was 32.8%. The prevalence of anxiety and depression was 14% higher and 16% higher among women (p = 0.025 and p = 0.006, respectively). Students whose parents were not physicians reported 23% higher prevalence of anxiety (p = 0.006), and those who had physician parents reported 29% higher prevalence of depression (p = 0.034). Those who always or often felt pushed by their parents showed 22% higher prevalence of anxiety (p =.006) and 19% higher depression (p = 0.016). Students who had concerns over the future had 15% higher prevalence of depression (p = 0.017). Conclusion The prevalence of anxiety and depressive symptoms was higher than the average found in the general population.

Knowledge of Guidelines for Cardiopulmonary Resuscitation among Brazilian Medical Students

ABSTRACT Introduction Sudden death is a substantial public health problem, representing a major cause of mortality worldwide. Suitable initial care is essential for a good prognosis of these patients. Objectives To assess the knowledge of the 2010 guidelines for cardiopulmonary resuscitation (CPR) among medical students in their final year of undergraduate training. Methods This was a cross-sectional study with a sample of 217 medical students enrolled in the sixth year of accredited medical schools in Brazil. A structured questionnaire with 27 items was used to record the sociodemographic characteristics of the participants and to assess their knowledge base of the 2010 ILCOR guidelines for CPR. Results Only fifty (23.04%) out of 217 students achieved results considered as satisfactory in the written evaluation. The average score obtained was 56.74% correct answers. Seventeen percent of the students had never performed CPR maneuvers and 83.80% had never performed cardioversion or defibrillation. Conclusions The knowledge base of medical students regarding cardiopulmonary resuscitation is low. Considering these medical students are in their final year of medical school, this study reveals a worrisome scenario.

Packaging concept development for an assortment of medical device products

Diplomityön tavoitteena oli kehittää Wipak Oy:n valmistamille sterilointipakkauksille tulevaisuuden pakkauskonsepti. Sterilointipakkaukset luokitellaan lääkelaitedirektiivin mukaan lisätarvikkeiksi luokan 1 lääkelaitteille, ja tämä näkökulma oli vahvasti mukana konseptin kehityksessä. Lähtökohtana pakkauskonseptin suunnittelulle oli tuotteiden arvoketjussa, eli pakata tuotteet siten että pakkausten avulla voidaan tuottaa lisäarvoa arvoketjun toimijoille. Tavoitteena oli parantaa pakkausten viestintää, toimivuutta/tehokkuutta toimitusketjussa sekä vahvistaa brändin imagoa myynti- ja kuljetuspakkauksen avulla. Lääkinnälliset laitteet ja tarvikkeet ovat lainsäädännön ja normien avulla tarkasti säädeltyjä. Näiden normien vaatimukset asettavat perusteet myynti- ja kuljetuspakkausten kehittämiselle. Tämän lisäksi suunnittelussa on huomioitu asiakkaiden toiveet ja kehitystarpeet. Kirjallisuusosuudessa on keskitytty lääkinnällisten laitteiden pakkausyksiköiden toimintoihin sekä niiden kehitysnäkymiin. Pääpaino on ollut pakkausmerkintöjen ja jäljitettävyyden kehittämisellä, koska tietojen automaattisen tunnistuksen hyödyntäminen lääkintälaitteiden pakkausten arvoketjussa on kasvava trendi. Manuaalisesti tehtävät tuotevirtojen kirjaukset ketjun eri toimijoiden osalta lisäävät riskejä jäljitettävyyden kannalta ja aiheuttavat lisätyötä ja – kustannuksia ketjun kaikille osapuolille. Ehdotus uudesta pakkauskonseptista on kehitetty näiden tietojen pohjalta. Ehdotuksessa on huomioitu lainsäädännöstä ja ketjun toimijoilta tulevat tarpeet, sekä alan tulevaisuuden kehitysnäkymät. Ehdotetun pakkauskonseptin avulla saadaan lisättyä myynti- ja kuljetuspakkausten tehokkuutta, parannettua jäljitettävyyttä ja helpotettu arvoketjun alavirran toimijoiden työtä lisäämällä erillinen sisäpakkaus myyntiyksikön sisälle. Työssä on lisäksi selvitetty pakkauskonseptin kustannusvaikutukset tuotteiden hintaan. Lopussa on ehdotettu jatkotoimenpiteet suunnitelman implementoimisesta käytäntöön.

Wood as a model material for medical biomaterials. In vivo and in vitro studies with bone and Betula pubescens Ehrh

Novel biomaterials are needed to fill the demand of tailored bone substitutes required by an ever‐expanding array of surgical procedures and techniques. Wood, a natural fiber composite, modified with heat treatment to alter its composition, may provide a novel approach to the further development of hierarchically structured biomaterials. The suitability of wood as a model biomaterial as well as the effects of heat treatment on the osteoconductivity of wood was studied by placing untreated and heat‐treated (at 220 C , 200 degrees and 140 degrees for 2 h) birch implants (size 4 x 7mm) into drill cavities in the distal femur of rabbits. The follow‐up period was 4, 8 and 20 weeks in all in vivo experiments. The flexural properties of wood as well as dimensional changes and hydroxyl apatite formation on the surface of wood (untreated, 140 degrees C and 200 degrees C heat‐treated wood) were tested using 3‐point bending and compression tests and immersion in simulated body fluid. The effect of premeasurement grinding and the effect of heat treatment on the surface roughness and contour of wood were tested with contact stylus and non‐contact profilometry. The effects of heat treatment of wood on its interactions with biological fluids was assessed using two different test media and real human blood in liquid penetration tests. The results of the in vivo experiments showed implanted wood to be well tolerated, with no implants rejected due to foreign body reactions. Heat treatment had significant effects on the biocompatibility of wood, allowing host bone to grow into tight contact with the implant, with occasional bone ingrowth into the channels of the wood implant. The results of the liquid immersion experiments showed hydroxyl apatite formation only in the most extensively heat‐treated wood specimens, which supported the results of the in vivo experiments. Parallel conclusions could be drawn based on the results of the liquid penetration test where human blood had the most favorable interaction with the most extensively heat‐treated wood of the compared materials (untreated, 140 degrees C and 200 degrees C heat‐treated wood). The increasing biocompatibility was inferred to result mainly from changes in the chemical composition of wood induced by the heat treatment, namely the altered arrangement and concentrations of functional chemical groups. However, the influence of microscopic changes in the cell walls, surface roughness and contour cannot be totally excluded. The heat treatment was hypothesized to produce a functional change in the liquid distribution within wood, which could have biological relevance. It was concluded that the highly evolved hierarchical anatomy of wood could yield information for the future development of bulk bone substitutes according to the ideology of bioinspiration. Furthermore, the results of the biomechanical tests established that heat treatment alters various biologically relevant mechanical properties of wood, thus expanding the possibilities of wood as a model material, which could include e.g. scaffold applications, bulk bone applications and serving as a tool for both mechanical testing and for further development of synthetic fiber reinforced composites.

Web-Based Extension Studies in Medical Calculation

Nordic forum for nursing teachers. Wednesday - Friday 9-11 November 2011 Ounasvaara Campus School of Heath Care and Sports Rovaniemi University of Applied Sciences

Realidade virtual e robótica em cirurgia: aonde chegamos e para onde vamos?

Minimally Invasive Surgery, Telesurgery, Robotics and Virtual Reality represent the technological frontiers that have revolutionized operating practices nowadays. These new technologies aim at improving the quality of assistance offered to patients; thus, they demand from the medical staff more effective measures as far as scientific research, training and expenditure of time and financial resources are concerned. In the past, surgeons have led several medical revolutions, such as the use of antiseptic surgical methods by Semelweiss, the use of anesthesia by Warren, antibiotic therapy, the transplants and the onset of the minimally invasive surgery by Mouret and Perissat. The objective of this article is to present the outreach of this new technology which comprises minimal access, computing, robotics and teletransmission. We have concluded that the new technologies developed in the medical field in the last decades, will offer new options and challenges for the treatment of the surgical patient, leading the scientific knowledge to a new era, the one of the virtual environment.

Low-fidelity bench models for basic surgical skills training during undergraduate medical education

It is remarkable the reduction in the number of medical students choosing general surgery as a career. In this context, new possibilities in the field of surgical education should be developed to combat this lack of interest. In this study, a program of surgical training based on learning with models of low-fidelity bench is designed as a complementary alternative to the various methodologies in the teaching of basic surgical skills during medical education, and to develop personal interests in career choice.

Helicopter emergency medical rescue for the traumatized: experience in the metropolitan region of Campinas, Brazil

OBJECTIVE: To analyze the profile of patients served by the air medical rescue system in the Metropolitan Region of Campinas, evaluating: triage and mobilization criteria; response time; on-site care and transport time; invasive procedures performed in the Pre-Hospital Care (PHC); severity of patients; morbidity and mortality.METHODS: We conducted a prospective, descriptive study in which we analyzed medical records of patients rescued between July 2010 and December 2012. During this period, 242 victims were taken to the HC-Unicamp. Of the 242 patients, 22 were excluded from the study.RESULTS: of the 220 cases evaluated, 173 (78.6%) were male, with a mean age of 32 years. Blunt trauma was the most prevalent (207 cases - 94.1%), motorcycle accidents being the most common mechanisms of injury (66 cases - 30%), followed by motor vehicle collisions (51 cases - 23.2%). The average response time was 10 ± 4 minutes and the averaged total pre-hospital time was 42 ± 11 minutes. The mean values of the trauma indices were: RTS = 6.2 ± 2.2; ISS = 19.2 ± 12.6; and TRISS = 0.78 ± 0.3. Tracheal intubation in the pre-hospital environment was performed in 77 cases (35%); 43 patients (19.5%) had RTS of 7.84 and ISSd"9, being classified as over-triaged. Of all patients admitted, the mortality was 15.9% (35 cases).CONCLUSION: studies of air medical rescue in Brazil are required due to the investments made in the pre-hospital care in a country without an organized trauma system. The high rate of over-triage found highlights the need to improve the triage and mobilization criteria.

Trauma leagues: an alternative way to teach trauma surgery to medical students

OBJECTIVE: to compare the knowledge of medical students between those who are members of the Trauma League (TL) and those from a non-Trauma League (NTL) group of the Federal University of Espírito Santo (UFES).METHODS: cross-sectional, analytical and descriptive study. Two knowledge tests, with 30 questions each, were applied to students from 3rd to 12th period, randomly selecting five students per period, with 50 students in the TL group and 50 in NTL. The questionnaire topics were: pre-hospital care, the mnemonic ABCDE trauma sequence, advanced trauma and imaging. The students' performances were evaluated by graduation-period group: basic (3rd-5th period), intermediary/clinical (6th-8th) and internship (9th-12th).RESULTS: in the first test the average accuracy of the TL group was 20.64 ± 3.17, while for the NTL group, it was 14.76 ± 5.28 (p<0.005). In the second test the average accuracy for the TL group was 21.52 ± 3.64, while for the NTL group, the average was 15.36 ± 29.5 (p<0.005). When divided into graduation periods, it was observed that the TL group showed a higher average across all three groups (p<0.05) in both tests.CONCLUSION: the students who attended the academic league activities have greater knowledge of the issues that are considered relevant to patient trauma care. In all periods of undergraduate academic training, the TL group had greater knowledge of the subject than the NTL group.

Basic skills for outpatient surgery in medical graduation

Medical students must have domain of basic surgery skills before starting more advanced stages of surgical learning. The authors present a practical and reproducible system of operative techniques circuit, idealized and often applied to the fourth year medical students of a private educational institution. This method has enabled accurate assessment of students' skills, improving their performance and preparing them for more advanced stages of the surgical learning.

The key practices of customer portfolio management (CPM) process in the medical and healthcare B2B industry

The goal of this study is to deepen the understanding of the customer portfolio management process. There are many models for the process, and they are not necessarily exclusive of each other. Consequently, the inclusion of many models might even prove out to be beneficial. Other theoretical framework include the current economical situation and its propose on customer portfolio management. With an understanding of the theoretical models as a background, the empirical part of this study compares Finnish multinational medical and healthcare technology companies’ customer portfolio management practices. The empirical research was carried out with theme interviews held with 11 sales and marketing managers or directors from four different companies. The goal was to discover the most essential practices of the process steps in the companies. The result of this study is that there is a lack of systematic customer portfolio management, but most companies are aiming to improve this in the near future. The most essential practices are analysis of sales, communication level, learning, and commitment to strategy of the focal company. Special characteristics of this industry include large business networks that include customers, professional end-users, institutions, universities, researchers, and key opinion leaders. The management and analysis of this comprehensive network has been seen to be extremely important for this industry.

Social Networking Sites as a part of Medical Device Manufacturer's Marketing Communications

The purpose of the thesis is to examine how a medical device manufacturer can exploit social networking sites as a part of its everyday marketing communications. The ultimate goal is to create an ideal process of developing marketing communications in social networking sites as a medical device manufacturer with the help of theoretical knowledge and hands-on experience. Theoretical part examines the traditional process of developing marketing communications, defines social networking sites and presents marketing activities carried out on these sites as well as introduces the characteristics of healthcare technology industry. Empirical part is collected through participation in medical device manufacturer’s marketing operations and by observing effects of different factors and actions on social media marketing. In addition, completed interviews and a meeting with company’s personnel have been utilized for data collection. This part offers comprehensive information on the examined company’s current marketing operations, industry, and activities carried out on social networking sites. As a result of the thesis a comprehensive process description of integrating and using social networking sites as a part of company’s marketing communications was formed. With the help of the process description factors and actions which have an effect on marketing operations in social networking sites are presented and methods for further developing these activities are introduced.

Techniques of radioautography for medical and biological research

Standard techniques for radioautography used in biological and medical research can be classified into three categories, i.e., macroscopic radioautography, light microscopic radioautography and electron microscopic radioautography. The routine techniques used in these three procedures are described. With regard to macroscopic radioautography, whole body radioautography is a standard technique which employs freezing and cryosectioning and can demonstrate organ distributions of both soluble and insoluble compounds. In contrast, in light and electron microscopic radioautography, soluble and insoluble techniques are separated. In order to demonstrate insoluble labeled compounds, conventional chemical fixations such as formalin for light microscopy or buffered glutaraldehyde and osmium tetroxide for both light and electron microscopy followed by dehydration, embedding and wet-mounting applications of radioautographic emulsions can be used. For the demonstration of soluble labeled compounds, however, cryotechniques such as cryofixation, cryosectioning, freeze-drying, freeze-substitution followed by dry-sectioning and dry-mounting radioautography should be employed both for light and electron microscopy. The outlines of these techniques, which should be utilized in various fields of biological and medical research, are described in detail

Photodynamic therapy: a new concept in medical treatment

A new concept in the therapy of both neoplastic and non-neoplastic diseases is discussed in this article. Photodynamic therapy (PDT) involves light activation, in the presence of molecular oxygen, of certain dyes that are taken up by the target tissue. These dyes are termed photosensitizers. The mechanism of interaction of the photosensitizers and light is discussed, along with the effects produced in the target tissue. The present status of clinical PDT is discussed along with the newer photosensitizers being used and their clinical roles. Despite the promising results from earlier clinical trials of PDT, considerable additional work is needed to bring this new modality of treatment into modern clinical practice. Improvements in the area of light source delivery, light dosimetry and the computation of models of treatment are necessary to standardize treatments and ensure proper treatment delivery. Finally, quality assurance issues in the treatment process should be introduced.