Electrophysiological markers of rapid cognitive decline in mild cognitive impairment

Electroencephalography (EEG) is an easily accessible and low-cost modality that might prove to be a particularly powerful tool for the identification of subtle functional changes preceding structural or metabolic deficits in progressive mild cognitive impairment (PMCI). Most previous contributions in this field assessed quantitative EEG differences between healthy controls, MCI and Alzheimer's disease(AD) cases leading to contradictory data. In terms of MCI conversion to AD, certain longitudinal studies proposed various quantitative EEG parameters for an a priori distinction between PMCI and stable MCI. However, cross-sectional comparisons revealed a substantial overlap in these parameters between MCI patients and elderly controls. Methodological differences including variable clinical definition of MCI cases and substantial interindividual differences within the MCI group could partly explain these discrepancies. Most importantly, EEG measurements without cognitive demand in both cross-sectional and longitudinal designs have demonstrated limited sensitivity and generally do not produce significant group differences in spectral EEG parameters. Since the evolution of AD is characterized by the progressive loss of functional connectivity within neocortical association areas, event-modulated EEG dynamic analysis which makes it possible to investigate the functional activation of neocortical circuits may represent a more sensitive method to identify early alterations of neuronal networks predictive of AD development among MCI cases. The present review summarizes clinically significant results of EEG activation studies in this field and discusses future perspectives of research aiming to reach an early and individual prediction of cognitive decline in healthy elderly controls.

A Middleware architecture for Unmanned Aircraft Avionics

An Unmanned Aerial Vehicle is a non-piloted airplane designed to operate in dangerous and repetitive situations. With the advent of UAV's civil applications, UAVs are emerging as a valid option in commercial scenarios. If it must be economically viable, the same platform should implement avariety of missions with little reconguration time and overhead.This paper presents a middleware-based architecture specially suited to operate as a exible payload and mission controller in a UAV. The system is composed of low-costcomputing devices connected by network. The functionality is divided into reusable services distributed over a number ofnodes with a middleware managing their lifecycle and communication.Some research has been done in this area; yetit is mainly focused on the control domain and in its realtime operation. Our proposal differs in that we address the implementation of adaptable and reconfigurable unmannedmissions in low-cost and low-resources hardware.

Quantum transport phenomena and shallow impurity states in CdSb

This work is dedicated to investigation of the energy spectrum of one of the most anisotropic narrow-gap semiconductors, CdSb. At the beginning of the present studies even the model of its energy band structure was not clear. Measurements of galvanomagnetic effects in wide temperature range (1.6 - 300 K) and in magnetic fields up to 30 T were chosen for clarifying of the energy spectrum in the intentionally undoped CdSb single crystals and doped with shallow impurities (In, Ag). Detection of the Shubnikov - de Haas oscillations allowed estimating the fundamental energy spectrum parameters. The shapes of the Fermi surfaces of electrons (sphere) and holes (ellipsoid), the number of the equivalent extremums for valence band (2) and their positions in the Brillouin zone were determined for the first time in this work. Also anisotropy coefficients, components of the tensor of effective masses of carriers, effective masses of density of states, nonparabolicity of the conduction and valence bands, g-factor and its anisotropy for n- and p-CdSb were estimated for the first time during these studies. All the results obtained are compared with the cyclotron resonance data and the corresponding theoretical calculations for p-CdSb. This is basic information for the analyses of the complex transport properties of CdSb and for working out the energy spectrum model of the shallow energy levels of defects and impurities in this semiconductor. It was found out existence of different mechanisms of hopping conductivity in the presence of metal - insulator transition induced by magnetic field in n- and p-CdSb. Quite unusual feature opened in CdSb is that different types of hopping conductivity may take place in the same crystal depending on temperature, magnetic field or even orientation of crystal in magnetic field. Transport properties of undoped p-CdSb samples show that the anisotropy of the resistivity in weak and strong magnetic fields is determined completely by the anisotropy of the effective mass of the holes. Temperature and magnetic field dependence of the Hall coefficient and magnetoresistance is attributed to presence of two groups of holes with different concentrations and mobilities. The analysis demonstrates that below Tcr ~ 20 K and down to ~ 6 - 7 K the low-mobile carriers are itinerant holes with energy E2 ≈ 6 meV. The high-mobile carriers, at all temperatures T < Tcr, are holes activated thermally from a deeper acceptor band to itinerant states of a shallower acceptor band with energy E1 ≈ 3 meV. Analysis of temperature dependences of mobilities confirms the existence of the heavy-hole band or a non-equivalent maximum and two equivalent maxima of the light-hole valence band. Galvanomagnetic effects in n-CdSb reveal the existence of two groups of carriers. These are the electrons of a single minimum in isotropic conduction band and the itinerant electrons of the narrow impurity band, having at low temperatures the energies above the bottom of the conduction band. It is found that above this impurity band exists second impurity band of only localized states and the energy of both impurity bands depend on temperature so that they sink into the band gap when temperature is increased. The bands are splitted by the spin, and in strong magnetic fields the energy difference between them decreases and redistribution of the electrons between the two impurity bands takes place. Mobility of the conduction band carriers demonstrates that scattering in n-CdSb at low temperatures is strongly anisotropic. This is because of domination from scattering on the neutral impurity centers and increasing of the contribution to mobility from scattering by acoustic phonons when temperature increases. Metallic conductivity in zero or weak magnetic field is changed to activated conductivity with increasing of magnetic field. This exhibits a metal-insulator transition (MIT) induced by the magnetic field due to shift of the Fermi level from the interval of extended states to that of the localized states of the electron spectrum near the edge of the conduction band. The Mott variablerange hopping conductivity is observed in the low- and high-field intervals on the insulating side of the MIT. The results yield information about the density of states, the localization radius of the resonant impurity band with completely localized states and about the donor band. In high magnetic fields this band is separated from the conduction band and lies below the resonant impurity bands.

The double-edged sword of social capital: Three essays on entrepreneurship in developing nations

ABSTRACT My study seeks to answer the main question: "how does entrepreneurs' social capital positively and negatively affect their resource mobilization efforts, and exploitation of entrepreneurial opportunity?" To answer this question, I develop a model for examining positive and negative effects of social capital on resource accumulation by entrepreneurs, and the subsequent effect of resource accumulation on the exploitation of entrepreneurial opportunity, and utilize data from Africa to ëmpirically test the relationships in this model. Developing nations are a suitable context because: a) They require entrepreneurship for economic development, b) They have received less attention in management and entrepreneurship research, c) Because of inadequately-developed institutions, entrepreneurs from developing nations face major resource mobilization challenges hence they often turn to their social ties for resources, and d) The communalistic and collectivistic nature of most developing nations -encouraging support and sharing of resources- may help us better understand how society's values and structures may contribute and also deduct firm resources. My study reveals that social capital contributes resources to entrepreneurs in developing nations at a cost that takes away resources, and that more resources but lower costs facilitate entrepreneurial opportunity exploitation. For entrepreneurs in developing nations, large networks, greater shared identity, and more trust are beneficial. To increase chances of raising more resources, entrepreneurs from communalistic societies should include network members from outside their communities. Besides providing financial support, policy-makers should develop training programs and advisory services on configuration of entrepreneurs' networks so as to achieve more resources at a low cost. My study insights can help improve entrepreneurs' resource accumulation efforts and the subsequent growth of their firms, leading to the overall economic growth of developing nations.

Touching the void: exploring virtual objects through a vibrotactile glove

This paper describes a simple low-cost approach toadding an element of haptic interaction within a virtualenvironment. Using off-the-shelf hardware and software wedescribe a simple setup that can be used to explore physically virtual objects in space. This setup comprises of a prototype glove with a number of vibrating actuators to provide the haptic feedback, a Kinect camera for the tracking of the user's hand and a virtual reality development environment. As proof of concept and to test the efficiency of the system as well as its potential applications, we developed a simple application where we created 4 different shapes within a virtual environment in order to try toexplore them and guess their shape through touch alone.

A segmentation analysis and segments profile of budget air travelers

Many Spanish destinations are now considering low cost airlines (LCA) important for attracting tourists. However, there is little evidence on the characteristics travelers using low cost airlines and their flight preferences. Typical segmentation of air travelers are business versus leisure travelers and business versus tourist fares. The aim of this paper is to obtain a deeper understanding of the demand of LCA through a segmentation analysis, based on 808 foreign travelers who used Girona airport, that focuses on low cost travelers’ valuations of different flight attributes and trip related characteristics

Hitsauksen mekanisointi laivan runkorakenteiden valmistuksessa

Hitsauksen mekanisoinnilla ja erityisesti kevytmekanisoinnilla saavutetaan melko pienin kustannuksin suuria etuja tuottavuudessa, laadussa ja työergonomiassa. Mekanisoinnin avulla voidaan saavuttaa soveltuvissa kohteissa hitsauksen kaariaikasuhteen kaksinkertaistuminen esim. 10 %:sta 20 %:iin. Tämä voi tarkoittaa kohteen kokonaishitsaustyöajan puolittumista. Mekanisoinnin tehokas hyödyntäminen edellyttää kuitenkin, että laitteet ovat helppokäyttöisiä ja haluttuja hitsauksen apuvälineitä. Genesis-projekti, jonka on määrä valmistua syksyllä 2009, tuo uuden haasteen Aker Yardsin Turun telakalle. Aluksen aikaisempia laivoja suurempi koko aiheuttaa haasteita tilankäytölle ja kapasiteetin riittävyydelle. Lisäksi käytettävät rakenteet aiheuttavat tuotantoon erityisiä ongelmia, joihin tämän diplomityön puitteissa on etsitty soveltuvia mekanisointiratkaisuja. Diplomityössä mekanisointilaitehankinnoilla lisättiin telakan laitekantaa ja korvattiin vanhentuneita laitteita. Laitteiden käyttöönotossa tarkasteltiin laitteiden puutteita ja pyrittiin löytämään käytettävyyttä parantavia ratkaisuja. Tässä työssä esitellyillä parannuksilla käytössä oleviin laitteisiin ja työmenetelmiin hitsauksen mekanisoinnin käyttöä voitaisiin lisätä vielä merkittävästi.

Innovaation kehittäminen yritysverkostolle, Case: Projektihallinta

Työn tavoitteena on kehittää arvoinnovaatio yritysverkostolle. Arvoinnovaation teoreettisen viitekehyksen konkretisoimiseksi ja arvioimiseksi käytetään työssä kohteena ProPortfolio - ohjelmistotuotetta sekä sen kehittämistyössä saatuja kokemuksia. ProPortfolio on vuosina 2001-2004 kehitetty mobiiliin teknologiaan perustuva ohjelmistosovellus. ProPortfolio ohjelmisto on liikkeenjohdon konsulttiyritys Tuloskunto Oy:n johdolla ja TEKES:n rahoittamassa hankkeessa kehitetty pientaloprojektien toteuttajaverkoston toiminnanohjausjärjestelmä. Pitkäaikaisen kilpailuedun saavuttaminen erottumalla kilpailijoiden massasta on kasvava haaste yrityksille. Tutkijoiden Kimin ja Mauborgnen kehittämän arvoinnovaation ja strategisen suunnittelun prosessin lähtökohtana on kilpailun kiertäminen differoitumalla kilpailijoista ja uusien markkinoiden luominen. Perinteisen strategisen ajattelutavan mukaan yritykset voivat tuottaa korkeampaa arvoaasiakkaille korkeammin kustannuksin tai kohtuullista arvoa pienemmin kustannuksin. Eli strateginen asemointi perustuu valintaan differoitumisen ja kustannusjohtajuuden välillä (Porter,1985). Arvoinnovaatioon perustuvassa asemoinnissa tavoitellaan sekä differoitumista että kustannusjohtajuutta samanaikaisesti. Arvoinnovaation keskeisimmät kriteerit täyttyivät kehityshankkeen lopputuloksena syntyneessä ProPortfolio -ohjelmistotuotteessa. Tämän työn pohjalta voidaan todeta, että Kimin ja Mauborgnen kehittämä strategian suunnitteluprosessi on laaja ja vaativa. Arvoinnovaatio syntyy harvoin hetkellisenä oivalluksena, vaan kehittyy järjestelmällisen työskentelyn tuloksena. ProPortfolio -ohjelmistotuotteen arvoinnovaation muodostuminen perustui kehityshankkeen onnistuneeseen asiakastarpeiden tunnistamiseen ja ennakoimiseen. Selkeän kuvan hahmottuminen ratkaistavista ongelmista auttoi asemoimaan hankkeen jatkokehitystyön oikein ja loi edellytykset arvoinnovaation muodostumiselle. Tutkijat Kim jaMauborgne ovat haastaneet perinteiset strategiatyöskentelyn mallit. Tutkimustuloksiinsa pohjautuen he ovat kehittäneet uuden arvoinnovaatioon perustuvan strategisen suunnittelun teoreettisen viitekehikon ja prosessin. Nämä mallit tulevat varmasti jättämään pysyvän jäljen strategiatyöskentelyn nykykäytäntöihin.

Langattoman tiedonsiirron hyödyntäminen kaukolämpöjärjestelmän hallinnassa

Langattomien tiedonsiirtotekniikoiden kehittyessä mielenkiinto niiden soveltamiseen teollisuudessa on kasvanut. Langattoman tiedonsiirron avulla voidaan korvata perinteiset kaapeliratkaisut ja samalla mahdollistaa uusia, lisäarvoa toiminnalle tuovia sovelluksia. Tavoitteena on kustannussäästöjen lisäksi tuotannon tehostaminen paremman tiedonkeruun ja joustavamman käyttöympäristön avulla. Kaukolämpöjärjestelmän osien väliset etäisyydet ovat useimmiten niin pitkiä, ettei lyhyen kantaman langattomia tekniikoita voida hyödyntää. Tämän työn perusteella realistisina vaihtoehtoina ovat toistaiseksi yleisten matkapuhelinverkkojen hyödyntäminen sekä radiolinkit, mutta tulevaisuudessa uudet langattomat verkkotekniikat voivat mahdollistaa ulkopuolisista operaattoreista riippumattoman mobiilin tiedonsiirtojärjestelmän toteuttamisen koko kaukolämpöjärjestelmän alueelle. Työn aikana havaittiin myös, että uusien sovellusalueiden kanssa on vielä entistäkin tärkeämpää kiinnittää huomiota huolelliseen suunnitteluun, kustannuslaskelmiin sekä tietoturvaan, jotta voidaan toteuttaa luotettava, edullinen ja toimivalangaton tiedonsiirtojärjestelmä.

Modeling and Synthesis of Tracking Control for the Belt Drive System

Usingof belt for high precision applications has become appropriate because of the rapid development in motor and drive technology as well as the implementation of timing belts in servo systems. Belt drive systems provide highspeed and acceleration, accurate and repeatable motion with high efficiency, long stroke lengths and low cost. Modeling of a linear belt-drive system and designing its position control are examined in this work. Friction phenomena and position dependent elasticity of the belt are analyzed. Computer simulated results show that the developed model is adequate. The PID control for accurate tracking control and accurate position control is designed and applied to the real test setup. Both the simulation and the experimental results demonstrate that the designed controller meets the specified performance specifications.

How to Improve the Use of Proton Pump Inhibitors

Introduction: Proton pump inhibitors (PPI) are one of the most prescribed medications in the world with proven efficacy. However, several studies showed that their use often doesn't respect indications, leading to over-consumption, thus exposing patients to drug interactions and adverse events (for example pneumonias). Interruption of PPIs can induce a rebound phenomenon. This generates costs for health systems.Methods: This is a prospective interventional study performed in two hospitals: La Chaux-de-Fonds (CDF, cases) and Neucha^tel (NE, control) during two six-month periods, comparing use of PPIs before and after intervention. We elaborated recommendations (PPI doses and treatment duration) based on recent medical literature that we summarized on A6 cards and gave out to all prescribing doctors in the hospital of CDF and held a 30-minute information session for the departments of surgery, medicine and anesthesiology in March 2010. Doctors were asked to apply our recommendations as often as possible, leaving space for their own assessment. No information was given to the doctors of the control hospital. The number of PPI tablets that the pharmacy sent to each careunit in both hospitals was counted and adjusted to the number of patientdays from April to September 2009 (before intervention) and April to September 2010 (after intervention). The number of other antacids that were used in both hospitals was counted during the same periods. General practitioners (GP) in the region around CDF received an explanation letter to avoid re-introduction, after discharge from the hospital, of PPI treatment stopped during the stay. The number of gastro-duodenal ulcers and upper digestive hemorrhages was counted from April to December 2009 and the same period in 2010 in both hospitals.Results: In 2010, in the hospital of CDF, the use of PPIs per 100 patient-days decreased by 36% in the surgical and medical departments compared to 2009. In the control hospital the use of PPIs per 100 patient-days increased by 10% in the surgical department and decreased by 5% in the medical department during the same periods. The decrease from 2009 to 2010 of PPI utilization in CDF comparing to NE is statistically significant: p<0.0001. Use of other antacids didn't change, ulcers or digestive hemorrhages decreased slightly from 2009 to 2010 in both hospitals. Conclusions: The study showed that with a very low-cost intervention, it is possible to decrease considerably the use of PPIs in a hospital, without taking any risk for gastro-intestinal complications.

Medical record search engines, using pseudonymised patient identity: an alternative to centralised medical records

Purpose The purpose of our multidisciplinary study was to define a pragmatic and secure alternative to the creation of a national centralised medical record which could gather together the different parts of the medical record of a patient scattered in the different hospitals where he was hospitalised without any risk of breaching confidentiality. Methods We first analyse the reasons for the failure and the dangers of centralisation (i.e. difficulty to define a European patients' identifier, to reach a common standard for the contents of the medical record, for data protection) and then propose an alternative that uses the existing available data on the basis that setting up a safe though imperfect system could be better than continuing a quest for a mythical perfect information system that we have still not found after a search that has lasted two decades. Results We describe the functioning of Medical Record Search Engines (MRSEs), using pseudonymisation of patients' identity. The MRSE will be able to retrieve and to provide upon an MD's request all the available information concerning a patient who has been hospitalised in different hospitals without ever having access to the patient's identity. The drawback of this system is that the medical practitioner then has to read all of the information and to create his own synthesis and eventually to reject extra data. Conclusions Faced with the difficulties and the risks of setting up a centralised medical record system, a system that gathers all of the available information concerning a patient could be of great interest. This low-cost pragmatic alternative which could be developed quickly should be taken into consideration by health authorities.

Continuous positive airway pressure causes lung injury in a model of sepsis.

Continuous positive airway pressure, aimed at preventing pulmonary atelectasis, has been used for decades to reduce lung injury in critically ill patients. In neonatal practice, it is increasingly used worldwide as a primary form of respiratory support due to its low cost and because it reduces the need for endotracheal intubation and conventional mechanical ventilation. We studied the anesthetized in vivo rat and determined the optimal circuit design for delivery of continuous positive airway pressure. We investigated the effects of continuous positive airway pressure following lipopolysaccharide administration in the anesthetized rat. Whereas neither continuous positive airway pressure nor lipopolysaccharide alone caused lung injury, continuous positive airway pressure applied following intravenous lipopolysaccharide resulted in increased microvascular permeability, elevated cytokine protein and mRNA production, and impaired static compliance. A dose-response relationship was demonstrated whereby higher levels of continuous positive airway pressure (up to 6 cmH(2)O) caused greater lung injury. Lung injury was attenuated by pretreatment with dexamethasone. These data demonstrate that despite optimal circuit design, continuous positive airway pressure causes significant lung injury (proportional to the airway pressure) in the setting of circulating lipopolysaccharide. Although we would currently avoid direct extrapolation of these findings to clinical practice, we believe that in the context of increasing clinical use, these data are grounds for concern and warrant further investigation.

Numerical analysis of including phase change material in a domestic hot water cylinder

The domestic hot water cylinder incorporates encapsulated pcm placed in 57 vertical pipes. The use of PCM increases the thermal energy storage capacity of the cylinder and allows the use of low cost electricity during low peak periods. After experimental validation the numerical model developed in the project will be used to optimize the distribution of the pcm inside the water tank.

Using the optical flow to implement a relative virtual mouse controlled by head movements

The following paper introduces the work conducted to create a relative virtual mouse based on the interpretation of head movements and face gesture through a low cost camera and the optical flow of the images. This virtual device is designed specifically as an alternative non-contact pointer for people with mobility impairments in the upper extremities and reduced head control. The proposed virtual device was compared with a conventional mouse, a touchpad and a digital joystick. Validation results show performances close to a digital joystick but far away from a conventional mouse.