二次光栅在波前测量中的应用

采用一种特殊的二次光栅用于激光波前测量, 它对非零级衍射光束具有不同的聚焦效应, 其光栅线为圆弧型而非直线。导出了在会聚光束情况下的两平面成像在单一像平面上的距离关系, 实验上实现了二次光栅用于会聚光束的波前测量, 测量得到会聚光束具有较大的散焦(-2.93λ)和球差(1.34λ), 与该透镜引起波前的离焦像差理论理想值(-2.695λ)基本符合。该技术可以实现波前的高空间分辨力和高精度实时测量, 大大减少光学元件数量, 降低装置成本。由于大功率激光束的不稳定性, 其波前变化非常快, 所以该方法的实时性非

高精度微结构聚合物光栅的复制技术

光栅复制是降低光栅制造成本,提高产量的一条有效途径。研究了利用紫外压印技术复制微结构光栅的方法。使用玻璃基底矩形浮雕结构的微结构光栅作为母光栅,给出了利用聚二甲基硅氧烷(PDMS)制作光栅模具和在光敏聚合物材料上复制微结构光栅的详细过程。经过优化工艺条件,成功地复制了一系列不同周期和开口比的微结构光栅,测试了复制光栅和母光栅的衍射图像和0级与±1级的衍射强度,结果表明,复制光栅和母光栅的衍射图像与光强分布基本一致。

Sensing and Actuation from Biology to Electronics

We introduce an in vitro diagnostic magnetic biosensing platform for immunoassay and nucleic acid detection. The platform has key characteristics for a point-of-use (POU) diagnostic: portability, low-power consumption, low cost, and multiplexing capability. As a demonstration of capabilities, we use this platform for the room temperature, amplification-free detection of a 31 bp DNA oligomer and interferon-gamma (a protein relevant for tuberculosis diagnosis). Reliable assay measurements down to 100 pM for the DNA and 1 pM for the protein are demonstrated. We introduce a novel "magnetic freezing" technique for baseline measurement elimination and to enable spatial multiplexing. We have created a general protocol for adapting integrated circuit (IC) sensors to any of hundreds of commercially available immunoassay kits and custom designed DNA sequences.

We also introduce a method for immunotherapy treatment of malignant gliomas. We utilize leukocytes internalized with immunostimulatory nanoparticle-oligonucleotide conjugates to localize and retain immune cells near the tumor site. As a proof-of-principle, we develop a novel cell imaging and incubation chamber for in vitro magnetic motility experiments. We use the apparatus to demonstrate the controlled movement of magnetically loaded THP-1 leukocytes.

Finally, we introduce an IC transmitter and power ampli er (PA) that utilizes electronic digital infrastructure, sensors, and actuators to self-heal and adapt to process, dynamic, and environmental variation. Traditional IC design has achieved incredible degrees of reliability by ensuring that billions of transistors on a single IC die are all simultaneously functional. Reliability becomes increasingly difficult as the size of a transistor shrinks. Self-healing can mitigate these variations.

Biossorção de vanádio pela macroalga marinha Sargassum filipendula

Muitos biossorventes naturais têm sido pesquisados por possuírem baixo custo e apresentarem propriedades ligantes, como é o caso da macroalga marinha Sargassum filipendula (S. filipendula) que vem sendo utilizada como material biossorvente no processo de biossorção de metais pesados. No presente trabalho a alga marrom foi utilizada para estudos realizados em batelada, onde se determinou o pH ideal de biossorção de vanádio, a relação sólido/líquido ideal e a importância da velocidade de agitação. O estudo cinético e de equilíbrio dos íons metálicos também foram realizados em bateladas nas seguintes condições de ensaio: (1) 0,10 g de biomassa, 25,0 mL de solução de vanádio igual a 18,0 mg L-1, temperatura 25,0 C e 150 rpm de agitação; (2) 0,10 g de biomassa, 25,0 mL de solução de vanádio igual a 36,0 mg L-1, temperatura 25,0 C e 150 rpm de agitação. A melhor condição para biossorção de vanádio foi encontrada para 36,0 mg L-1 e pH= 2,0. O estudo cinético de biossorção de vanádio mostrou que o modelo de segunda ordem descreve melhor os dados experimentais em 36,0 mg L-1 (R2= 0,9825). O estudo de equilíbrio mostrou um perfil crescente de remoção de vanádio. A melhor eficiência de captação dos íons de vanádio foi de 61,0 % para Co= 40,0 mg L-1 em pH= 2,0. Os dados experimentais da isoterma de vanádio mostraram-se mais adequados ao modelo de Langmuir para pH= 2,0, Os parâmetros de equilíbrio calculados a partir do modelo de Langmuir (b, qmax ) 0,009 e 43,3 mg/g, respectivamente, corroboram melhor para a interpretação dos resultados quando comparados com o modelo de Freundlich (kF, n) 1,56 e 2,41, visto que o coeficiente de correlação é maior para Langmuir

Análise da contaminação das águas do córrego São Lourenço (Nova Friburgo, RJ) por agrotóxicos organofosforados e carbamatos

O córrego de São Lourenço (Nova Friburgo RJ), situado na principal região agrícola do estado, representa um importante manancial hídrico do município de Nova Friburgo que percorre um vale onde se concentram as principais lavouras responsáveis pela produção de olerícolas do Estado. Esta localidade apresenta expressiva relação de consumo de agrotóxicos por trabalhador (56 kg/trabalhador/ano). Assim, este córrego recebe todos os resíduos provenientes das lavouras situadas em suas margens. As águas desse córrego são usadas após tratamento pela população residente na área metropolitana e, são usadas sem tratamento pela população residente em suas margens. Este estudo tem como objetivo avaliar a contaminação das águas desse córrego por agrotóxicos anticolinesterásicos. Amostras de água foram coletadas mensalmente de abril/07 a fevereiro/08, em seis pontos do Córrego São Lourenço e em um ponto do Córrego das Paixões. Foram utilizadas garrafas previamente rinsadas com metanol e enxaguadas várias vezes com água destilada. A avaliação dos níveis de pesticidas se deu por método enzimático descrito por Cunha Bastos et al (1991) e pela etapa de concentração e extração dos pesticidas em coluna de carvão ativado foi adaptada a partir do método descrito por Kaipper et al. (2001), que possui a vantagem de ser um teste rápido de avaliação inicial e de baixo custo. Como controle negativo foi usado águas coletadas no ponto um, situado em área de floresta, sem terras cultivadas ao redor. Foram geradas 72 amostras, onde 33 apresentaram indícios de contaminação, mas apenas uma atingiu o limite de detecção do método, 5 ppb, em maio/07. Estes resultados, principalmente os obtidos nos pontos localizados na parte final do córrego São Lourenço, sugerem, além da utilização recente de agrotóxicos, a importância de fatores climatológicos e do regime do uso de tais compostos possivelmente interferindo na detecção dos resíduos em questão

Fiber Bragg grating temperature sensor for multiplexed measurement with high resolution

A novel fiber Bragg grating temperature sensor is proposed and experimentally demonstrated with a long-period grating as a linear response edge filter to convert wavelength into intensity-encoded information for interrogation. The sensor is embedded into an aluminum substrate with a larger coefficient of thermal expansion to enhance its temperature sensitivity. A large dynamic range of 110 degreesC and a high resolution of 0.02 degreesC are obtained in the experiments. The technique can be used for multiplexed measurements with one broadband source and one long-period grating, and therefore is low Cost. (C) 2004 Society of PhotoOptical Instrumentation Engineers.

Wave-front analysis method of circular aperture sampling for collimation testing

A new type of wave-front analysis method for the collimation testing of laser beams is proposed. A concept of wave-front height is defined, and, on this basis, the wave-front analysis method of circular aperture sampling is introduced. The wave-front height of the tested noncollimated wave can be estimated from the distance between two identical fiducial diffraction planes of the sampled wave, and then the divergence is determined. The design is detailed, and the experiment is demonstrated. The principle and experiment results of the method are presented. Owing to the simplicity of the method and its low cost, it is a promising method for checking the collimation of a laser beam with a large divergence. © 2005 Optical Society of America.

径向双折射滤波器的超分辨性能研究

超分辨技术因其可以超越经典的衍射极限而为人们所熟知．并且．在光存储和共焦扫描成像系统中有着广泛的应用。把由两个偏振器和一个圆对称的双折射元件组成的径向双折射滤波器引入超分辨技术，借助琼斯算法推导出其光瞳函数的表达式。由分析得出通过改变径向双折射滤波器中偏振器的偏振方向和双折射元件的主轴之间的夹角，即可实现光学系统的横向超分辨或轴向超分辨。同时对评价该器件超分辨性能的参量第一零点比、斯特尔比和旁瓣强度抑制比做了详细的讨论。该滤波器用于超分辨技术的优点在于其制作不涉及相位的变化而比较简单，且费用比较低。缺点是

Fitness 19. Plan de marketing

El siguiente trabajo consiste en el desarrollo de un plan de marketing para la apertura de un centro franquiciado de la empresa Fitness19 en la localidad de Algorta, Getxo. Se trata de una franquicia española que basa su actividad en la instalación de centros deportivos de Fitness “Low Cost”, es decir, de bajo coste para el usuario. Con esto lo que pretenden es diferenciarse del resto de empresas de su sector ofreciendo unos servicios especializados a bajo coste. La filosofía que siguen es la de ofrecer solo fitness, que es lo que realmente busca el cliente, al mejor precio. De esta manera, presentaremos el proyecto, analizaremos el entorno de la empresa (tanto genérico como específico) y su situación interna con el objetivo de definir las amenazas, oportunidades, debilidades y fortalezas que presenta. Para ello examinaremos el ámbito geográfico en el que se planea su implantación y su mercado y detallaremos los servicios que pone a nuestra disposición la franquicia. Una vez realizado este análisis y diagnóstico se procederá a la elaboración de las estrategias de marketing y se detallará un plan de acción y control para su consiguiente aplicación. El objetivo del análisis y la planificación es llevar a cabo la tarea de crear y poner en funcionamiento de forma exitosa el centro franquiciado siguiendo un plan estructurado y preciso. Este plan está diseñado para abarcar todas las estrategias y acciones necesarias desde el momento de creación de la empresa, que será en Mayo de 2015, pasando por la ubicación, obra del local y su apertura hasta la época navideña de ese mismo año. De esta manera se definen en el trabajo dos etapas muy diferentes: etapa preapertura y etapa de actividad.

Novel Mach-Zehnder interferometer structure for tunable optical interleaver

A novel optical interleaver scheme based on nested optical glass pairs is proposed. The assembly of pairs behaves as a cascaded Mach-Zehnder interferometer. The interleaver, with simple structure, low cost, and compact size, can be easily implemented with inexpensive material and mature preparation technology. Small channel spacing (<= 50 GHz), high isolation (<-30 dB), a wide, flat passband and stop band (> 2/11 period), and center-frequency tunability can be obtained simultaneously. An optimum design of a 50-GHz tunable interleaver based on this structure is given as an example. Its environmental temperature sensitivity and fabrication tolerance are also analyzed. (c) 2006 Society of Photo-Optical Instrumentation Engineers.

Collimation testing using axial intensity

We proposed a new method of measuring the degree of collimation of laser beam using axial intensity information near paraxial focus. Preceding methods for collimation testing are mainly either based on self-imaging or interferometric techniques. The new method is to employ the diffraction behavior of noncollimated wave in circular aperture diaphragm. The principle of the proposed method and experiment results are presented. Due to simplicity of the method and its low cost, it is a promising method for checking the collimation of laser beam. (c) 2005 Published by Elsevier GmbH.

Heteroepitaxy of Group IV and Group III-V semiconductor alloys for photovoltaic applications

Photovoltaic energy conversion represents a economically viable technology for realizing collection of the largest energy resource known to the Earth -- the sun. Energy conversion efficiency is the most leveraging factor in the price of energy derived from this process. This thesis focuses on two routes for high efficiency, low cost devices: first, to use Group IV semiconductor alloy wire array bottom cells and epitaxially grown Group III-V compound semiconductor alloy top cells in a tandem configuration, and second, GaP growth on planar Si for heterojunction and tandem cell applications.

Metal catalyzed vapor-liquid-solid grown microwire arrays are an intriguing alternative for wafer-free Si and SiGe materials which can be removed as flexible membranes. Selected area Cu-catalyzed vapor-liquid solid growth of SiGe microwires is achieved using chlorosilane and chlorogermane precursors. The composition can be tuned up to 12% Ge with a simultaneous decrease in the growth rate from 7 to 1 μm/min^-1. Significant changes to the morphology were observed, including tapering and faceting on the sidewalls and along the lengths of the wires. Characterization of axial and radial cross sections with transmission electron microscopy revealed no evidence of defects at facet corners and edges, and the tapering is shown to be due to in-situ removal of catalyst material during growth. X-ray diffraction and transmission electron microscopy reveal a Ge-rich crystal at the tip of the wires, strongly suggesting that the Ge incorporation is limited by the crystallization rate.

Tandem Ga_1-xIn_xP/Si microwire array solar cells are a route towards a high efficiency, low cost, flexible, wafer-free solar technology. Realizing tandem Group III-V compound semiconductor/Si wire array devices requires optimization of materials growth and device performance. GaP and Ga_1-xIn_xP layers were grown heteroepitaxially with metalorganic chemical vapor deposition on Si microwire array substrates. The layer morphology and crystalline quality have been studied with scanning electron microscopy and transmission electron microscopy, and they provide a baseline for the growth and characterization of a full device stack. Ultimately, the complexity of the substrates and the prevalence of defects resulted in material without detectable photoluminescence, unsuitable for optoelectronic applications.

Coupled full-field optical and device physics simulations of a Ga_0.51In_0.49P/Si wire array tandem are used to predict device performance. A 500 nm thick, highly doped "buffer" layer between the bottom cell and tunnel junction is assumed to harbor a high density of lattice mismatch and heteroepitaxial defects. Under simulated AM1.5G illumination, the device structure explored in this work has a simulated efficiency of 23.84% with realistic top cell SRH lifetimes and surface recombination velocities. The relative insensitivity to surface recombination is likely due to optical generation further away from the free surfaces and interfaces of the device structure.

Finally, GaP has been grown free of antiphase domains on Si (112) oriented substrates using metalorganic chemical vapor deposition. Low temperature pulsed nucleation is followed by high temperature continuous growth, yielding smooth, specular thin films. Atomic force microscopy topography mapping showed very smooth surfaces (4-6 Å RMS roughness) with small depressions in the surface. Thin films (~ 50 nm) were pseudomorphic, as confirmed by high resolution x-ray diffraction reciprocal space mapping, and 200 nm thick films showed full relaxation. Transmission electron microscopy showed no evidence of antiphase domain formation, but there is a population of microtwin and stacking fault defects.

Biossorção de tório com emprego de Sargassum filipendula

Com o aumento do rigor para descarte de efluentes contaminado com metais pesados, as pesquisas têm se intensificado na busca de métodos de remoção, que tragam bons resultados de captação dos metais, aliado a um baixo custo. O uso de biomassas como bactérias, fungos e algas marinhas como material adsorvente, tem se apresentado como uma alternativa, principalmente para soluções com baixo teor de metais. Neste trabalho, a alga marinha Sargassum filipendula foi avaliada na sua capacidade de remoção do metal tório de uma solução sintética e do efluente dos laboratórios de análises ambientais do IRD. A cinética desta biossorção foi estudada em regime de batelada e o equilíbrio foi alcançado com 180 min de reação. Dois modelos cinéticos foram utilizados nesta avaliação, um de primeira ordem e um modelo de pseudo segunda ordem, tendo o modelo de segunda ordem apresentado um melhor ajuste dos dados. Na avaliação da capacidade máxima de captação do tório pela biomassa marinha em regime de batelada, foi construída a isoterma que apresentou um perfil crescente na captação alcançando um máximo de 2,59 mol/g. Os modelos de Langmuir e Freundlich foram utilizados para ajustar os dados da isoterma, tendo apresentado maior correlação com os dados o modelo de Langmuir, resultando num valor de captação máxima calculado pelo modelo de 2,92 mol/g. A capacidade de remoção do metal tório da alga Sargassum filipendula também foi avaliada em regime contínuo. Um estudo de altura crítica de leito foi realizado preenchendo-se uma coluna com diferentes massas de alga correspondendo a diferentes alturas de leito. A concentração de tório residual foi quantificada na solução de saída e a menor concentração na saída foi alcançada com 40 cm de leito ou 96 g de biomassa. Após este estudo um sistema contínuo com duas colunas, com 96 g de biomassa cada, e uma bomba peristáltica foi utilizado para o tratamento do efluente real do IRD, contendo não apenas o metal tório, mas outros metais como urânio, cálcio, cromo, ferro, chumbo, etc. Cento e cinco litros de efluente foram tratados numa concentração de 6 mg/L, a concentração do efluente de saída foi de 3,75 mg/L. A caracterização do efluente quanto aos metais presentes foi realizada em ICP-MS, os resultados demonstraram que não houve competição pelos sítios ligantes da biomassa entre o tório e os demais metais. Além disso, alguns metais como cálcio, ferro e magnésio, tiveram um aumento na concentração de saída indicando a presença do mecanismo de troca iônica na biossorção do tório por Sargassum filipendula

Imaging the earth with ambient noise and earthquakes

In this thesis, I develop the velocity and structure models for the Los Angeles Basin and Southern Peru. The ultimate goal is to better understand the geological processes involved in the basin and subduction zone dynamics. The results are obtained from seismic interferometry using ambient noise and receiver functions using earthquake- generated waves. Some unusual signals specific to the local structures are also studied. The main findings are summarized as follows:

(1) Los Angeles Basin

The shear wave velocities range from 0.5 to 3.0 km/s in the sediments, with lateral gradients at the Newport-Inglewood, Compton-Los Alamitos, and Whittier Faults. The basin is a maximum of 8 km deep along the profile, and the Moho rises to a depth of 17 km under the basin. The basin has a stretch factor of 2.6 in the center decreasing to 1.3 at the edges, and is in approximate isostatic equilibrium. This "high-density" (~1 km spacing) "short-duration" (~1.5 month) experiment may serve as a prototype experiment that will allow basins to be covered by this type of low-cost survey.

(2) Peruvian subduction zone

Two prominent mid-crust structures are revealed in the 70 km thick crust under the Central Andes: a low-velocity zone interpreted as partially molten rocks beneath the Western Cordillera – Altiplano Plateau, and the underthrusting Brazilian Shield beneath the Eastern Cordillera. The low-velocity zone is oblique to the present trench, and possibly indicates the location of the volcanic arcs formed during the steepening of the Oligocene flat slab beneath the Altiplano Plateau.

The Nazca slab changes from normal dipping (~25 degrees) subduction in the southeast to flat subduction in the northwest of the study area. In the flat subduction regime, the slab subducts to ~100 km depth and then remains flat for ~300 km distance before it resumes a normal dipping geometry. The flat part closely follows the topography of the continental Moho above, indicating a strong suction force between the slab and the overriding plate. A high-velocity mantle wedge exists above the western half of the flat slab, which indicates the lack of melting and thus explains the cessation of the volcanism above. The velocity turns to normal values before the slab steepens again, indicating possible resumption of dehydration and ecologitization.

(3) Some unusual signals

Strong higher-mode Rayleigh waves due to the basin structure are observed in the periods less than 5 s. The particle motions provide a good test for distinguishing between the fundamental and higher mode. The precursor and coda waves relative to the interstation Rayleigh waves are observed, and modeled with a strong scatterer located in the active volcanic area in Southern Peru. In contrast with the usual receiver function analysis, multiples are extensively involved in this thesis. In the LA Basin, a good image is only from PpPs multiples, while in Peru, PpPp multiples contribute significantly to the final results.

Incremental Control Synthesis for Robotics in the Presence of Temporal Logic Specifications

This thesis presents methods for incrementally constructing controllers in the presence of uncertainty and nonlinear dynamics. The basic setting is motion planning subject to temporal logic specifications. Broadly, two categories of problems are treated. The first is reactive formal synthesis when so-called discrete abstractions are available. The fragment of linear-time temporal logic (LTL) known as GR(1) is used to express assumptions about an adversarial environment and requirements of the controller. Two problems of changes to a specification are posed that concern the two major aspects of GR(1): safety and liveness. Algorithms providing incremental updates to strategies are presented as solutions. In support of these, an annotation of strategies is developed that facilitates repeated modifications. A variety of properties are proven about it, including necessity of existence and sufficiency for a strategy to be winning. The second category of problems considered is non-reactive (open-loop) synthesis in the absence of a discrete abstraction. Instead, the presented stochastic optimization methods directly construct a control input sequence that achieves low cost and satisfies a LTL formula. Several relaxations are considered as heuristics to address the rarity of sampling trajectories that satisfy an LTL formula and demonstrated to improve convergence rates for Dubins car and single-integrators subject to a recurrence task.