Behaviour of turbulent Prandtl/Schmidt number in compressible mixing layer

The behaviour of turbulent Prandtl/Schmidt number is explored through the model-free simulation results. It has been observed that compressibility affects the Reynolds scalar flux vectors. Reduced peak values are also observed for compressible convective Mach number mixing layer as compared with the incompressible convective Mach number counterpart, indicating a reduction in the mixing of enthalpy and species. Pr-t and Sc-t variations also indicate a reduction in mixing. It is observed that unlike the incompressible case, it is difficult to assign a constant value to these numbers due to their continuous variation in space. Modelling of Pr-t and Sc-t would be necessary to cater for this continuous spatial variation. However, the turbulent Lewis number is evaluated to be near unity for the compressible case, making it necessary to model only one of the Pr-t and Sc-t..

NUMERICAL STUDIES OF DYNAMO ACTION IN A TURBULENT SHEAR FLOW. I.

We perform numerical experiments to study the shear dynamo problem where we look for the growth of a large-scale magnetic field due to non-helical stirring at small scales in a background linear shear flow in previously unexplored parameter regimes. We demonstrate the large-scale dynamo action in the limit where the fluid Reynolds number (Re) is below unity while the magnetic Reynolds number (Rm) is above unity; the exponential growth rate scales linearly with shear, which is consistent with earlier numerical works. The limit of low Re is particularly interesting, as seeing the dynamo action in this limit would provide enough motivation for further theoretical investigations, which may focus attention on this analytically more tractable limit of Re < 1 compared to the more formidable limit of Re > 1. We also perform simulations in the regimes where (i) both (Re, Rm) < 1, and (ii) Re > 1 and Rm < 1, and compute all of the components of the turbulent transport coefficients (alpha(ij) and alpha(ij)) using the test-field method. A reasonably good agreement is observed between our results and the results of earlier analytical works in similar parameter regimes.

Fin-Enabled-Area-Scaled Tunnel FET

While keeping the technological evolution and commercialization of FinFET technology in mind, this paper discloses a novel concept that enables area-scaled or vertical tunneling in Fin-based technologies. The concept provides a roadmap for beyond FinFET technologies, while enjoying the advantages of FinFET-like structure without demanding technological abruptness from the existing FinFET technology nodes to beyond FinFET nodes. The proposed device at 10-nm gate length, when compared with the conventional vertical tunneling FET or planar area-scaled device, offers 100% improvement in the ON-current, 15x reduction in the OFF-current, 3x increase in the transconductance, 30% improvement in the output resistance, 55% improvement in the unity gain frequency, and more importantly 6x reduction in the footprint area for a given drive capability. Furthermore, the proposed device brings the average and minimum subthreshold slope down to 40 and 11 mV/decade at 10-nm gate length. This gives a path for beyond FinFET system-on-chip applications, while enjoying the analog, digital, and RF performance improvements.

1D Tight-Binding Models Render Quantum First Passage Time ``Speakable''

The calculation of First Passage Time (moreover, even its probability density in time) has so far been generally viewed as an ill-posed problem in the domain of quantum mechanics. The reasons can be summarily seen in the fact that the quantum probabilities in general do not satisfy the Kolmogorov sum rule: the probabilities for entering and non-entering of Feynman paths into a given region of space-time do not in general add up to unity, much owing to the interference of alternative paths. In the present work, it is pointed out that a special case exists (within quantum framework), in which, by design, there exists one and only one available path (i.e., door-way) to mediate the (first) passage -no alternative path to interfere with. Further, it is identified that a popular family of quantum systems - namely the 1d tight binding Hamiltonian systems - falls under this special category. For these model quantum systems, the first passage time distributions are obtained analytically by suitably applying a method originally devised for classical (stochastic) mechanics (by Schroedinger in 1915). This result is interesting especially given the fact that the tight binding models are extensively used in describing everyday phenomena in condense matter physics.

Relationship between entropy and diffusion: A statistical mechanical derivation of Rosenfeld expression for a rugged energy landscape

Diffusion-a measure of dynamics, and entropy-a measure of disorder in the system are found to be intimately correlated in many systems, and the correlation is often strongly non-linear. We explore the origin of this complex dependence by studying diffusion of a point Brownian particle on a model potential energy surface characterized by ruggedness. If we assume that the ruggedness has a Gaussian distribution, then for this model, one can obtain the excess entropy exactly for any dimension. By using the expression for the mean first passage time, we present a statistical mechanical derivation of the well-known and well-tested scaling relation proposed by Rosenfeld between diffusion and excess entropy. In anticipation that Rosenfeld diffusion-entropy scaling (RDES) relation may continue to be valid in higher dimensions (where the mean first passage time approach is not available), we carry out an effective medium approximation (EMA) based analysis of the effective transition rate and hence of the effective diffusion coefficient. We show that the EMA expression can be used to derive the RDES scaling relation for any dimension higher than unity. However, RDES is shown to break down in the presence of spatial correlation among the energy landscape values. (C) 2015 AIP Publishing LLC.

Tetrahedrites as thermoelectric materials: an overview

Tetrahedrites are natural earth-abundant minerals consisting of environmentally-friendly elements of copper and sulphur. Recently, research has been focused on the natural and synthetic minerals of tetrahedrite materials for thermoelectric applications. The thermoelectric figure of merit zT of around unity at similar to 723 K for many doped and natural tetrahedrite materials in the past 2-3 years was determined and this value is comparable to conventional p-type TE materials. In this review, a brief history of tetrahedrite materials is followed by information about its crystal structure and chemical bonding, electronic band structure and transport properties. Different synthesis approaches have been summarized. Also, this review outlines the effect of different doping elements on the thermoelectric properties of tetrahedrite materials, and the natural mineral tetrahedrite that can be used as thermoelectric materials.

Physical constraints, fundamental limits, and optimal locus of operating points for an inverted pendulum based actuated dynamic walker

The inverted pendulum is a popular model for describing bipedal dynamic walking. The operating point of the walker can be specified by the combination of initial mid-stance velocity (v(0)) and step angle (phi(m)) chosen for a given walk. In this paper, using basic mechanics, a framework of physical constraints that limit the choice of operating points is proposed. The constraint lines thus obtained delimit the allowable region of operation of the walker in the v(0)-phi(m) plane. A given average forward velocity v(x,) (avg) can be achieved by several combinations of v(0) and phi(m). Only one of these combinations results in the minimum mechanical power consumption and can be considered the optimum operating point for the given v(x, avg). This paper proposes a method for obtaining this optimal operating point based on tangency of the power and velocity contours. Putting together all such operating points for various v(x, avg,) a family of optimum operating points, called the optimal locus, is obtained. For the energy loss and internal energy models chosen, the optimal locus obtained has a largely constant step angle with increasing speed but tapers off at non-dimensional speeds close to unity.

Bulk-Induced 1/f Noise at the Surface of Three-Dimensional Topological Insulators

Slow intrinsic fluctuations of resistance, also known as the flicker noise or 1/f-noise, in the surface transport of strong topological insulators (TIs) is a poorly understood phenomenon. Here, we have systematically explored the 1/f-noise in field-effect transistors (FET) of mechanically exfoliated Bi1.6Sb0.4Te2Se TI films when transport occurs predominantly via the surface states. We find that the slow kinetics of the charge disorder within the bulk of the TI induces mobility fluctuations at the surface, providing a new source of intrinsic 1/f-noise that is unique to bulk TI systems. At small channel thickness, the noise magnitude can be extremely small, corresponding to the phenomenological Hooge parameter gamma(H) as low as approximate to 10(-4), but it increases rapidly when channel thickness exceeds similar to 1 mu m. From the temperature (T)-dependence of noise, which displayed sharp peaks at characteristic values of T, we identified generation-recombination processes from interband transitions within the TI bulk as the dominant source of the mobility fluctuations in surface transport. Our experiment not only establishes an intrinsic microscopic origin of noise in TI surface channels, but also reveals a unique spectroscopic information on the impurity bands that can be useful in bulk TI systems in general.

Effect of Ni content on the diffusion-controlled growth of the product phases in the Cu(Ni)-Sn system

A strong influence of Ni content on the diffusion-controlled growth of the (Cu,Ni)(3)Sn and (Cu,Ni)(6)Sn-5 phases by coupling different Cu(Ni) alloys with Sn in the solid state is reported. The continuous increase in the thickness ratio of (Cu,Ni)(6)Sn-5 to (Cu,Ni)(3)Sn with the Ni content is explained by combined kinetic and thermodynamic arguments as follows: (i) The integrated interdiffusion coefficient does not change for the (Cu,Ni)(3)Sn phase up to 2.5 at.% Ni and decreases drastically for 5 at.% Ni. On the other hand, there is a continuous increase in the integrated interdiffusion coefficient for (Cu,Ni)(6)Sn-5 as a function of increasing Ni content. (ii) With the increase in Ni content, driving forces for the diffusion of components increase for both components in both phases but at different rates. However, the magnitude of these changes alone is not large enough to explain the high difference in the observed growth rate of the product phases because of Ni addition. (iv) Kirkendall marker experiments indicate that the Cu6Sn5 phase grows by diffusion of both Cu and Sn in the binary case. However, when Ni is added, the growth is by diffusion of Sn only. (v) Also, the observed grain refinement in the Cu6Sn5 phase with the addition of Ni suggests that the grain boundary diffusion of Sn may have an important role in the observed changes in the growth rate.

Effect of liquid bridge volume on the instability in small-Prandtl-number half zones

A perturbation method is used to examine the linear instability of thermocapillary convection in a liquid bridge of floating half-zone filled with a small Prandtl number fluid. The influence of liquid bridge volume on critical Marangoni number and flow features is analyzed. The neutral modes show that the instability is mainly caused by the bulk flow that is driven by the nonuniform thermocapillary forces acting on the free surface. The hydrodynamic instability is dominant in the case of small Prandtl number fluid and the first instability mode is a stationary bifurcation. The azimuthal wave number for the most dangerous mode depends on the liquid bridge volume, and is not always two as in the case of a cylindrical liquid bridge with aspect ratio near 0.6. Its value may be equal to unity when the liquid bridge is relatively slender.

Los dilemas de la acción colectiva global. Un estudio de caso : el movimiento sindical en el MERCOSUR (1991-2012)

Resumen: Este trabajo analiza la acción colectiva sindical postnacional en el MERCOSUR en un período histórico signado por profundas mutaciones políticas, económicas, y productivas sociales (1991-2012) a partir de los relatos y representaciones de sus protagonistas. El trabajo cualitativo intentará explicar la configuración del sindicalismo internacional en la globalización, y describir las estrategias del movimiento obrero mercosureño. La metodología cualitativa ilustra un trabajo de campo a partir de entrevistas en profundidad a 34 sindicalistas del Mercosur, y entrevistas adicionales a tres representantes de la Confederación Sindical de las Américas, dos empresarios del Mercosur, un especialista académico en la dimensión sociolaboral de la integración regional y un representante de la OIT en la región. La metodología de análisis e interpretación de dichas entrevistas ha sido la teoría fundamentada, entendida como la técnica más idónea de aprehender los procesos sociales a través de las voces de los líderes obreros, comprender su realidad, sus representaciones y sistema de valores, sus ideas y su acción colectiva. La literatura de los movimientos sociales en la globalización capitalista ha puesto el énfasis en la emergencia de nuevos colectivos cuyos reclamos se concentran en el reconocimiento (Fraser y Honneth, 2006) de sus identidades que el modelo fordista de producción pareció invisibilizar y soslayar ante la primacía de las prácticas económicas y demandas distributivas. Esta tesis conjuga una perspectiva dualista y demuestra que las estrategias de reconocimiento y las reivindicaciones de redistribución de tipo clasista se resignificaron en el escenario postnacional a través de la Coordinadora de Centrales Sindicales del Cono Sur –CCSCS- (subregional) y, con un desarrollo menor: los Sindicatos Globales (FSI, GUFs) en la acción sectorial [1991-2012]. Para arribar al núcleo configurativo de sus representaciones y su sistema de valores, la investigación transitó por los sentidos y significados del trabajo, las mutaciones productivas y de las condiciones del trabajo, las teorías del fin del trabajo, la precarización y la representación de los trabajadores más frágiles: mujeres, jóvenes y migrantes. En un segundo orden se interpeló sobre la gobernanza mundial, los organismos internacionales, el régimen normativo internacional, la civilización capitalista, para luego abordar el estudio específico del Mercosur y la acción obrera en dicho proceso. El núcleo determinó que para los representantes obreros la acción colectiva sindical debe ser postnacional y su objetivo es limitar la globalización capitalista neoliberal. La CCSCS conformó desde sus inicios un movimiento capaz de elevarse al rango supranacional para representar la voz de los trabajadores del MERCOSUR. La pluralidad configuró su mayor virtud durante sus primeros 20 años, reconociendo una experiencia de aprendizaje de tolerancia y respeto, que ellos definen como la unidad en la diversidad. Esta entidad constituye un patrimonio único como paradigma del sindicalismo postnacional. Los sindicatos del Cono Sur adoptaron diversas modalidades de acción colectiva: a) reactiva (con repertorios de insubordinación, de lucha y resistencia al modelo neoliberal), b) proactiva (con repertorios de incidencia normativa en el MERCOSUR) y c) participativa (con repertorios de producción propositiva de incidencia en la dimensión social del MERCOSUR). Su acción colectiva reactiva, normativa y propositiva fue eficaz a mediano plazo para participar e incidir en el MERCOSUR, crear una dimensión social del bloque y dotar de derechos normativos a los ciudadanos de la región. Su acción tuvo un sentido político de gran poder instituyente, con capacidad movilización y alta exposición pública. Sin embargo, en la segunda década su lógica de construcción quedó subordinada a los procesos nacionales y a los partidos gobernantes, dejó de ser performativa y de creación política, dirimiéndose en la esfera social junto a otros movimientos sociales emergentes, y provocó un ciclo de desmovilización. Simultáneamente, emergió con fuerza otra modalidad de sindicalismo postnacional con la fusión y refundación de los Sindicatos Globales. Su acción sectorial contribuye a restaurar las demandas de distribución que habían quedado soslayadas, pero esta tesis manifiesta que los protagonistas afirman que sus marcos de acción colectiva deberán ser conjuntos para ser exitosa. El sindicalismo postnacional en el MERCOSUR se define a sí mismos como agente de desarrollo, protagonista del modelo socioproductivo, pero también como vehículo partícipe de la democracia y de una matriz sustentable de desarrollo

Funciones ejecutivas y control ejecutivo : una revisión bibliográfica mirando la arquitectura de la mente

El término “funciones ejecutivas” comienza a ser utilizado por Lezak en los 80’. No se trata de un concepto unitario, incluyendo varias funciones cognitivas y autodirigidas que contribuyen a la autorregulación del individuo. Existen varias controversias acerca del constructo “funciones ejecutivas”, entre ellas: la unidad vs diversidad de los procesos cognitivos que implican las funciones ejecutivas, y la naturaleza del control ejecutivo; el presente artículo se focaliza sobre esta última cuestión. Se presentarán dos aproximaciones de acuerdo a distintos modos de explicación de la memoria de trabajo y del control ejecutivo. Finalmente, se propone enfocar el estudio de las funciones ejecutivas desde una visión integrada de la mente, para su mejor comprensión.

El tema del tiempo en la "Expositio in physicam" de Walter Burley

Resumen: El trabajo permite reconstruir el itinerario de la reacción inmediata del ultra realismo de Walter Burley frente a la crítica nominalista, tomando base en la teoría física y particularmente, en el tema del tiempo. Entendemos que el análisis comparativo de las doctrinas de Burley y de Ockham permitirá arrojar cierta luz sobre la historia de los primeros e importantes enfrentamientos al ockhamismo, procurando conformar una intelección nueva del siglo XIV donde Burley pasaría a ser un personaje de interés al motivar la reflexión de una figura como la de Ockham. Centramos nuestro análisis en torno a dos tópicos: aquel vinculado con la determinación del concepto de tiempo y su distinción del movimiento; y en segundo término, consideraremos el problema de la unicidad o pluralidad de tiempos. El trabajo propone tentativamente que ambos autores conocieron mutuamente sus doctrinas, se leyeron y corrigieron recíprocamente; y las profundas diferencias que conforman sus sistemas deben buscarse en una fundamentación gnoseo-ontológica diversa.

¿Perspectiva médica o visión integral del hombre? : análisis crítico de la anticoncepción

Resumen: El objetivo principal de este trabajo es analizar si la anticoncepción es un asunto perteneciente a la Medicina, como lo indica la práctica, o si merece una visión bajo una perspectiva más amplia. Se analizan publicaciones que estudian el problema de la efectividad de la anticoncepción considerando variables demográficas, económicas y sociales que gravitan a la hora de evaluar la eficacia en anticoncepción. Se incluye en el análisis aspectos espirituales y psicológicos, que generalmente son subestimados, pero que fueron considerados en el pensamiento filosófico y antropológico que desplegó K. Wojtyla, quien parte de la base de la unidad de la persona

Las Sergas de Esplandián como trans-formación amadisiana

Integran este número de la revista ponencias presentadas en Studia Hispanica Medievalia VIII: Actas de las IX Jornadas Internacionales de Literatura Española Medieval, 2008, y de Homenaje al Quinto Centenario de Amadis de Gaula