Enhancement of ultrafiltration process by pretreatment in recovery of hemicelluloses from wood extracts

Hemicelluloses are potential raw material for several items produced in future wood-based biorefineries. One possible method for recovering hemicelluloses from wood extracts is ultrafiltration (UF). However, low filtration capacities and severe fouling restrict the use of tight UF membranes in the treatment of wood extracts. The lack of suitable commercial membranes creates a need for pretreatment which would decrease fouling and increase the filtration capacity. This thesis focuses on the evaluation of the possibility to improve the filtration capacity and decrease fouling with the pretreatment of wood extracts. Methods which remove harmful compounds and methods which degrade them are studied, as well as combinations of the methods. The tested pretreatments have an influence on both the concentration of different compounds and the molecular mass distribution of the compounds in the extract. This study revealed that in addition to which kind of compounds were removed, also the change in molecular size distribution affected the filtration capacity significantly. It was shown that the most harmful compounds for the filtration capacity of the hydrophobic 5 kDa membrane were the ones capable of permeating the membrane and fouling also the inner membrane structure. Naturally, the size of the most harmful compounds depends on the used UF membrane and is thus case-specific. However, in the choice of the pretreatment method, the focus should be on the removal of harmful compound sizes rather than merely on the total amount of removed foulants. The results proved that filtration capacity can be increased with both adsorptive and oxidative pretreatments even by hundreds of per cents. For instance, the use of XAD7 and XAD16 adsorbents increased the average flux in the UF of a birch extract from nearly zero to 107 kg/(m2h) and 175 kg/(m2h), respectively. In the treatment of a spruce extract, oxidation by pulsed corona discharge (PCD) increased the flux in UF from 46 kg/(m2h) to 158 kg/(m2h). Moreover, when a birch extract batch was treated with laccase enzyme, the flux in UF increased from 15 kg/(m2h) to 36 kg/(m2h). However, fouling was decreased only by adsorptive pretreatment while oxidative methods had a negligible or even negative impact on it. This demonstrates that filtration capacity and fouling are affected by different compounds and mechanisms. The results of this thesis show that filtration capacity can be improved and fouling decreased through appropriate pretreatment. However, the choice of the best possible pretreatment is case-specific and depends on the wood extract and the membrane used. Finding the best option requires information on the extract content and membrane characteristics as well as on the filtration performance of the membrane in the prevailing conditions and a multivariate approach. On the basis of this study, it can be roughly concluded that adsorptive pretreatment improves the filtration capacity and decreases fouling rather reliably, but it may lead to significant hemicellulose losses. Oxidation reduces the loss of valuable hemicelluloses and could improve the filtration capacity, but fouling challenges may remain. Combining oxidation with adsorptive pretreatment was not a solution for avoiding hemicellulose losses in the tested cases.

Development and Effect Analysis of the Asteri Consultative Auditing Process - Safety and Security Management in Educational Institutions

The Finnish legislation requires for a safe and secure learning environment. However, the comprehensive, risk based safety and security management (SSM) and the management commitment in the implementation and development of the SSM are not mentioned in the legislation. Multiple institutions, operators and researchers have studied and developed safety and security in educational institutions over the past decade. Typically the approach has been fragmented and without bringing up the importance of the comprehensive SSM. The development needs of the safety and security operations in universities have been studied. However, in universities of applied sciences (UASs) and in elementary schools (ESs), the performance level, strengths and weaknesses of the comprehensive SSM have not been studied. The objective of this study was to develop the comprehensive, risk based SSM of educational institutions by developing the new Asteri consultative auditing process and study its effects on auditees. Furthermore, the performance level in the comprehensive SSM in UASs and ESs were studied using Asteri and the TUTOR model developed by the Keski-Uusimaa Department for Rescue Services. In addition, strengths, development needs and differences were identified. In total, 76 educational institutions were audited between the years 2011 and 2014. The study is based on logical empiricism, and an observational applied research design was used. Auditing, observation and an electronic survey were used for data collection. Statistical analysis was used to analyze the collected information. In addition, thematic analysis was used to analyze the development areas of the organizations mentioned by the respondents in the survey. As one of the main contributions, this research presents the new Asteri consultative auditing process. Organizations with low performance levels on the audited subject benefit the most from the Asteri consultative auditing process. Asteri may be usable in many different types of audits, not only in SSM audits. As a new result, this study provides new knowledge on attitudes related to auditing. According to the research findings, auditing may generate negative attitudes and the auditor should take them into account when planning and preparing for audits. Negative attitudes can be compensated by producing added value, objectivity and positivity for the audit and, thus, improve the positive effects of auditing on knowledge and skills. Moreover, as the results of this study shows, auditing safety and security issues do not increase feelings of insecurity, but rather increase feelings of safety and security when using the new Asteri consultative auditing process with the TUTOR model. The results showed that the SSM in the audited UASs was statistically significantly more advanced than that in the audited ESs. However, there is still room for improvement in the ESs and the UASs as the approach to the SSM was fragmented. It can be assumed that the majority of Finnish UASs and ESs do not likely meet the basic level of the comprehensive, risk based the SSM.

Developing Supply Chain Process Management and Measurement in Global Manufacturing Company

The objective of this research is to create a current state analysis of pulp supply chain processes from production planning to deliveries to customers. A cross-functional flowchart is being used to model these processes. These models help finding key performance indicators (KPIs) which enable examinations of the supply chain efficiency. Supply chain measures in different processes reveal the changes need processes that affect the whole supply chain and its efficiency and competitiveness. Structure of pulp supply chain differs from most of the other supply chains. The fact that there are big volumes of bulk products, small product variations and supply forecasts are made for the year ahead make the difference. This factor brings different benefits but also challenges when developing supply chain. This thesis divides pulp supply chain in three different main categories: production planning, warehousing and transportation. It provides tools for estimating the functionality of supply chain as well as developing the efficiency for different functions of supply chain. By having a better understanding of supply chain processes and measurement the whole supply chain structure can be developed significantly.

Incorporating Sustainability in Global Sourcing Process, Industry Focus- Apparel / Textile

This is a Master’s thesis research, which mainly aims at identifying the sustainability issues in sourcing process and to identify the core competencies in sourcing process through triple bottom line adaptation. The focus of this thesis is on apparel industry’s sourcing process. The purpose of this thesis is to examine global apparel industry’s reality in their sourcing process and how buyers-suppliers are cooperating with their sourcing process to incorporate sustainability. Other goal of this research paper is to provide recommendation for sustainable sourcing process for companies and how the stakeholders can be benefitted by sustainable sourcing. The literature review part of this paper has presented the research gaps from the earlier researches along with the key concepts, academic purposes and key definitions. Theoretical framework chapter has focused on global sourcing strategies and firm’s competencies and sustainable strategies. From the theoretical framework, author has presented essential theory which establishes the link between research questions and proposed hypotheses. Main results and findings have been presented in empirical findings and in data analysis chapter. This study is an exploratory research followed by deductive method and primary data has been used to evaluate the current situation of apparel industry; which will assist to build the recommendation model. Primary data has been collected through online questionnaires and secondary data has used to cover the literature and theoretical parts. Therefore, the potential outcome of this paper will display the importance of sustainable sourcing from academic point of view and also from the business perspective. As a final point, this paper has followed the research objectives and has generated some new directions for further studies.

The roles and tasks of salespeople in Software-as-a-Service company's value-based sales process

Recent research in relationships marketing and sales and sales management emphasizes companies’ ability to create customer value as a core of all business-to-business relationships. The role of individual salespeople in business relation-ships is commonly acknowledged, but has been largely neglected in extant literature. This study offers especially more detailed perspective on salespeople’s roles and tasks in business-to-business value-based sales process. It focuses especially on Software-as-a-Service business environment. The objective of the study is to find out how salespeople can create value in Software-as-a-Service value-based sales process. It determines value-based sales process, salespeople’s roles and tasks in it, and combines value assessment in to process. The results indicate that salespeople have to adapt different selling roles and tasks in Software-as-a-Service value-based sales process to be able to support the customer’s value-in-use experience. The process itself is highly complex, consisting of multiple facets and selling behaviors, and involves relevant actors from both parties of relationship. The study concludes with a discussion of possibilities that provide interesting aspects for future research.

Improving purchasing process for small purchases at a manufacturing company in chemical industry

This thesis was conducted on assignment by a multinational chemical corporation as a case study. The purpose of this study is to find ways to improve the purchasing process for small purchases at the case company. The improvements looked after are mainly cost and time savings. Purchasing process is the process that starts from the requisition of goods or services and ends when the invoice is paid. In this thesis the purchases with value less than 1000€ are considered to be small. The theoretical framework of the thesis consists of general theoretical view of costs and performance of the purchasing process, different types of purchasing processes and a model for improving purchasing processes. The categorization to small and large purchases is the most important followed by the division between direct and indirect purchases. Also models that provide more strategic perspective for categorization were found to be useful. Auditing and managerial control are important parts of the purchasing process. When considering the transaction costs of purchasing from the costs–benefits perspective large and small purchases should not have the same processes. Purchasing cards, e-procurement and vendor managed inventory are seen as an alternative to the traditional purchasing process. The empirical data collection was done by interviewing the company employees that take part of the purchasing process in their daily work. The interviews had open-ended questions and the answers were coded and analyzed. The results consist of process description and assessment as well as suggestions for potential improvements. At the case company the basic purchasing process was similar to the traditional purchasing process that is entirely done with computers and online. For some categories there was already more sophisticated e-procurement solutions in use. To improve the current e-procurement based solutions elimination of authorization workflow and better information exchange can be seen as potential improvements for most of the case purchases. Purchasing cards and a lightweight form of vendor managed inventory can be seen as potential improvements for some categories. Implementing the changes incurs at least some cost and the benefits might be hard to measure. This thesis has revealed that the small purchases have potential for significant cost and time savings at the case company.

An examination of the mediation process as it is used to resolve sexual harassment complaints in Canadian universities /

The ways in which the process of mediation affected those involved in the resolution of sexual harassment complaints in Canadian universities were explored. Questionnaires were sent to forty- six Canadian universities and interviews were conducted with fifteen advisors. An analysis of the twenty- two questionnaires returned indicated that mediation was utilized in 11% of the sexual harassment complaints and effected a successful resolution in 67% of these. Both complainants and those con^lained against were reported to have spoken more favourably than unfavourably about the process and outcome of mediation. Questionnaire respondents in general found mediation a slightly less than satisfactory method of complaint resolution. Those respondents who had successfully used mediation; however, describe its usefulness within a university context.

Problem solving and computer-assisted instruction in science education : analysis of research findings and the research process /

The quantitative component of this study examined the effect of computerassisted instruction (CAI) on science problem-solving performance, as well as the significance of logical reasoning ability to this relationship. I had the dual role of researcher and teacher, as I conducted the study with 84 grade seven students to whom I simultaneously taught science on a rotary-basis. A two-treatment research design using this sample of convenience allowed for a comparison between the problem-solving performance of a CAI treatment group (n = 46) versus a laboratory-based control group (n = 38). Science problem-solving performance was measured by a pretest and posttest that I developed for this study. The validity of these tests was addressed through critical discussions with faculty members, colleagues, as well as through feedback gained in a pilot study. High reliability was revealed between the pretest and the posttest; in this way, students who tended to score high on the pretest also tended to score high on the posttest. Interrater reliability was found to be high for 30 randomly-selected test responses which were scored independently by two raters (i.e., myself and my faculty advisor). Results indicated that the form of computer-assisted instruction (CAI) used in this study did not significantly improve students' problem-solving performance. Logical reasoning ability was measured by an abbreviated version of the Group Assessment of Lx)gical Thinking (GALT). Logical reasoning ability was found to be correlated to problem-solving performance in that, students with high logical reasoning ability tended to do better on the problem-solving tests and vice versa. However, no significant difference was observed in problem-solving improvement, in the laboratory-based instruction group versus the CAI group, for students varying in level of logical reasoning ability.Insignificant trends were noted in results obtained from students of high logical reasoning ability, but require further study. It was acknowledged that conclusions drawn from the quantitative component of this study were limited, as further modifications of the tests were recommended, as well as the use of a larger sample size. The purpose of the qualitative component of the study was to provide a detailed description ofmy thesis research process as a Brock University Master of Education student. My research journal notes served as the data base for open coding analysis. This analysis revealed six main themes which best described my research experience: research interests, practical considerations, research design, research analysis, development of the problem-solving tests, and scoring scheme development. These important areas ofmy thesis research experience were recounted in the form of a personal narrative. It was noted that the research process was a form of problem solving in itself, as I made use of several problem-solving strategies to achieve desired thesis outcomes.

Thinking skills in the language arts : an application of cognitive schema theory to the narrative writing process /

A cognitively based instructional program for narrative writing was developed. The effects of using cognitively based schematic planning organizers at the pre-writing stage were evaluated using subjects from the Primary, Junior and Intermediate divisions. Results indicate that the use of organizers based on problem solving significantly improved the organization and the overall quality of narrative writing for students in grades 3, 6 and 7. The magnitude of the improvement of the treatment group over the control group performance in Organization ranged from 10.7% to 22.9%. Statistical and observational data indicate many implications for further research into the cognitive basis for writing and reading; for the improvement and evaluation of school writing programs; for the design of school curricula; and for the inservice education for teachers of writing.

Father involvement in the breastfeeding process : determining contributing aspects

The importance of father involvement in the young family is increasingly evident. This research was conducted using the theory of planned behaviour to understand important aspects contributing to father invo lvement in the breastfeeding process. Eighty mothers and 65 fathers of one-year-old children completed a questionnaire regarding father involvement (FI) in breastfeeding. Measures included attitudes, subjective norms, and perceived behaviour control regarding FI and the extent to which fathers demonstrated involvement by advocating for and affIrming breastfeeding, being present during breastfeeding, providing household help, and being responsive to their partners' needs. Results suggest that mothers and fathers experience FI differently. Mothers' perceptions are motivated by intrinsic attitudinal considerations, whereas fathers' involvement is primarily motivated by the opinions of others. Interventions should focus on increasing fathers' perception of societal approval through approaches such as peer-led groups, and increasing mothers' approval through information of the value of fathers' involvement in the breastfeeding process.

Sport-Specific Arbitration in Canada: A Qualitative Investigation of Four Athletes' Perceptions of the Fairness of the Process

This thesis explored Canadian high performance Athletes' perceptions of the fairness of the SDRCC sport-specific arbitral process. Leventhal’s (1980) model of procedural justice judgment was found to be an effective tool for exploring Athletes’ perceptions of the fairness of the process. Five of his six procedural justice antecedents: consistency, bias suppression, accuracy of information, representativeness, and ethicality influenced the Athletes’ perceptions of the fairness of the process. Emergent data also revealed that the Athletes’ perceptions of fairness were also influenced by three contextual factors and an additional antecedent of procedural justice. Efficiency of the process, inherent power imbalance between Athletes and NSOs, and the measurable effect of the process on personal and professional relationships differentiate sport-specific arbitration from most other processes of allocation. The data also indicated that the opportunity to voice one’s case was also an important determinant of the Athletes’ perceptions of the fairness of the process.

Forgiveness in Two Minds: Understanding Forgiveness Through Dual-Process Theory

In this thesis, I examined the relevance of dual-process theory to understanding forgiveness. Specifically, I argued that the internal conflict experienced by laypersons when forgiving (or finding themselves unable to forgive) and the discrepancies between existing definitions of forgiveness can currently be best understood through the lens of dual-process theory. Dual-process theory holds that individuals engage in two broad forms of mental processing corresponding to two systems, here referred to as System 1 and System 2. System 1 processing is automatic, unconscious, and operates through learned associations and heuristics. System 2 processing is effortful, conscious, and operates through rule-based and hypothetical thinking. Different definitions of forgiveness amongst both lay persons and scholars may reflect different processes within each system. Further, lay experiences with internal conflict concerning forgiveness may frequently result from processes within each system leading to different cognitive, affective, and behavioural responses. The study conducted for this thesis tested the hypotheses that processing within System 1 can directly affect one's likelihood to forgive, and that this effect is moderated by System 2 processing. I used subliminal conditioning to manipulate System 1 processing by creating positive or negative conditioned attitudes towards a hypothetical transgressor. I used working memory load (WML) to inhibit System 2 processing amongst half of the participants. The conditioning phase of the study failed and so no conclusions could be drawn regarding the roles of System 1 and System 2 in forgiveness. The implications of dual-process theory for forgiveness research and clinical practice, and directions for future research are discussed.

Conceptualizing Institutional Capacity Building Through a Learning Process Set in Motion by a Foundation

Employing critical pedagogy and transformative theory as a theoretical framework, I examined a learning process associated with building capacity in community-based organizations (CBOs) through an investigation of the Institutional Capacity Building Program (ICBP) initiated by a Foundation. The study sought to: (a) examine the importance of institutional capacity building for individual and community development; (b) investigate elements of a process associated with a program and characteristics of a learning process for building capacity in CBOs; and (c) analyze the Foundation’s approach to synthesizing, systematizing, and sharing learning. The study used a narrative research design that included 3 one-on-one, hour-long interviews with 2 women having unique vantage points in ICBP: one is a program facilitator working at the Foundation and the other runs a CBO supported by the Foundation. The interviews’ semistructured questions allowed interviewees to share stories regarding their experience with the learning process of ICB and enabled themes to emerge from their day-to-day experience. Through the analysis of this learning process for institutional capacity building, a few lessons can be drawn from the experience of the Foundation.