双聚焦偏移速度估计与可分表示叠前弹性反演

In exploration seismology, the geologic target of oil and gas reservoir in complex medium request the high accuracy image of the structure and lithology of the medium. So the study of the prestack image and the elastic inversion of seismic wave in the complex medium come to the leading edge. The seismic response measured at the surface carries two fundamental pieces of information: the propagation effects of the medium and the reflections from the different layer boundaries in the medium. The propagation represent the low-wavenumber component of the medium, it is so-called the trend or macro layering, whereas the reflections represent the high-wavenumber component of the medium, it is called the detailed or fine layering. The result of migration velocity analysis is the resolution of the low-wavenumber component of the medium, but the prestack elastic inversion provided the resolution of the high-wavvenumber component the medium. In the dissertation, the two aspects about the migration velocity estimation and the elastic inversion have been studied.Firstly, any migration velocity analysis methods must include two basic elements: the criterion that tell us how to know whether the model parameters are correct and the updating that tell us how to update the model parameters when they are incorrect, which are effected on the properties and efficiency of the velocity estimation method. In the dissertation, a migration velocity analysis method based on the CFP technology has been presented in which the strategy of the top-down layer stripping approach are adapted to avoid the difficult of the selecting reduce .The proposed method has a advantage that the travel time errors obtained from the DTS panel are defined directly in time which is the difference with the method based on common image gather in which the residual curvature measured in depth should be converted to travel time errors.In the proposed migration velocity analysis method, the four aspects have been improved as follow:? The new parameterization of velocity model is provided in which the boundaries of layers are interpolated with the cubic spline of the control location and the velocity with a layer may change along with lateral position but the value is calculated as a segmented linear function of the velocity of the lateral control points. The proposed parameterization is suitable to updating procedure.? The analytical formulas to represent the travel time errors and the model parameters updates in the t-p domain are derived under local lateral homogeneous. The velocity estimations are iteratively computed as parametric inversion. The zero differential time shift in the DTS panel for each layer show the convergence of the velocity estimation.? The method of building initial model using the priori information is provided to improve the efficiency of velocity analysis. In the proposed method, Picking interesting events in the stacked section to define the boundaries of the layers and the results of conventional velocity analysis are used to define the velocity value of the layers? An interactive integrate software environment with the migration velocity analysis and prestack migration is built.The proposed method is firstly used to the synthetic data. The results of velocity estimation show both properties and efficiency of the velocity estimation are very good.The proposed method is also used to the field data which is the marine data set. In this example, the prestack and poststack depth migration of the data are completed using the different velocity models built with different method. The comparison between them shows that the model from the proposed method is better and improves obviously the quality of migration.In terms of the theoretical method of expressing a multi-variable function by products of single-variable functions which is suggested by Song Jian (2001), the separable expression of one-way wave operator has been studied. A optimization approximation with separable expression of the one-way wave operator is presented which easily deal with the lateral change of velocity in space and wave number domain respectively and has good approach accuracy. A new prestack depth migration algorithm based on the optimization approximation separable expression is developed and used to testing the results of velocity estimation.Secondly, according to the theory of the seismic wave reflection and transmission, the change of the amplitude via the incident angle is related to the elasticity of medium in the subsurface two-side. In the conventional inversion with poststack datum, only the information of the reflection operator at the zero incident angles can be used. If the more robust resolutions are requested, the amplitudes of all incident angles should be used.A natural separable expression of the reflection/transmission operator is represented, which is the sum of the products of two group functions. One group function vary with phase space whereas other group function is related to elastic parameters of the medium and geological structure.By employing the natural separable expression of the reflection/transmission operator, the method of seismic wave modeling with the one-way wave equation is developed to model the primary reflected waves, it is adapt to a certain extent heterogeneous media and confirms the accuracy of AVA of the reflections when the incident angle is less than 45'. The computational efficiency of the scheme is greatly high.The natural separable expression of the reflection/transmission operator is also used to construct prestack elastic inversion algorithm. Being different from the AVO analysis and inversion in which the angle gathers formed during the prstack migration are used, the proposed algorithm construct a linear equations during the prestack migration by the separable expression of the reflection/transmission operator. The unknowns of the linear equations are related to the elasticity of the medium, so the resolutions of them provided the elastic information of the medium.The proposed method of inversion is the same as AVO inversion in , the difference between them is only the method processing the amplitude via the incident angle and computational domain.

地震偏移宽角吸收边界条件和Toeplitz矩阵反演中的边界效应研究

The content of this paper is based on the research work while the author took part in the key project of NSFC and the key project of Knowledge Innovation of CAS. The whole paper is expanded by introduction of the inevitable boundary problem during seismic migration and inversion. Boundary problem is a popular issue in seismic data processing. At the presence of artificial boundary, reflected wave which does not exist in reality comes to presence when the incident seismic wave arrives at the artificial boundary. That will interfere the propagation of seismic wave and cause alias information on the processed profile. Furthermore, the quality of the whole seismic profile will decrease and the subsequent work will fail.This paper has also made a review on the development of seismic migration, expatiated temporary seismic migration status and predicted the possible break through. Aiming at the absorbing boundary problem in migration, we have deduced the wide angle absorbing boundary condition and made a compare with the boundary effect of Toepiitz matrix fast approximate computation.During the process of fast approximate inversion computation of Toepiitz system, we have introduced the pre-conditioned conjugate gradient method employing co circulant extension to construct pre-conditioned matrix. Especially, employment of combined preconditioner will reduce the boundary effect during computation.Comparing the boundary problem in seismic migration with that in Toepiitz matrix inversion we find that the change of boundary condition will lead to the change of coefficient matrix eigenvalues and the change of coefficient matrix eigenvalues will cause boundary effect. In this paper, the author has made an qualitative analysis of the relationship between the coefficient matrix eigenvalues and the boundary effect. Quantitative analysis is worthy of further research.

Una testimonianza silenziosa.Storia della Chiesa cattolica in Tunisia dal Trattato del Bardo alla ‘rivoluzione dei gelsomini’

The work examines the change involving the Church in Tunisia from the period of the Protectorate to the present through the fundamental moments of independence (1956) and the signing of the ‘Modus vivendi’ (1964). In the first structure of the “modern” Church, a fundamental role was played by the complex figure of the French Cardinal Charles-Allemand Lavigerie who, while giving strong impulse to setting up disinterested charitable social initiatives by the congregations (Pères Blancs, Soeurs Blanches and others), also represented the ideal of the ‘evangelizing’ (as well as colonial) Church which, despite its declared will to avoid proselytism, almost inevitably tended to slip into it. During the French Protectorate (1881-1956) the ecclesiastic institution concentrated strongly on itself, with little heed for the sensitivity of its host population, and developed its activities as if it were in a European country. From the social standpoint, the Church was mostly involved in teaching, which followed the French model, and health facilities. In the Church only the Pères Blancs missionaries were sincerely committed to promoting awareness of the local context and dialogue with the Muslims. The Catholic clergy in the country linked its religious activity close to the policy of the Protectorate, in the hope of succeeding in returning to the ancient “greatness of the African Church”, as the Eucharistic Congress in Carthage in 1930 made quite clear. The Congress itself planted the first seed in the twentyfive- year struggle that led the Tunisian population to independence in 1956 and the founding of the Republic in 1957. The conquest of independence and the ‘Modus vivendi’ marked a profound change in the situation and led to an inversion of roles: the Catholic community was given the right to exist only on the condition that it should not interfere in Tunisian society. The political project of Bourguiba, who led the Republic from 1957 to 1987, aimed to create a strongly egalitarian society, with a separation between political and religious powers. In particular, in referring to the Church, he appeared as a secularist with no hostility towards the Catholics who were, however, considered as “cooperators”, welcome so long as they were willing to place their skills at the service of the construction of the state. So, in the catholic Community was a tension between the will of being on the side of the country and that of conserving a certain distance from it and not being an integral part of it. In this process of reflection, the role of the Second Vatican Council was fundamental: it spread the idea of a Church open to the world and the other religions, in particular to Islam: the teaching of the Council led the congregations present in the country to accept the new condition. This new Church that emerged from the Council saw some important events in the process of “living together”, of “cultural mixing” and the search for a common ground between different realities. The almost contemporary arrival of Arab bishops raised awareness among the Tunisians of the existence of Christian Arabs and, at the same time, the Catholic community began considering their faith in a different way. In the last twenty years the situation has continued to change. Side by side with the priests present for decades or even those born there, some new congregations have begun to operate, albeit in small numbers: they have certainly revitalized the community of the faithful, but they sometimes appear more devoted to service “within” the Church, than to services for the population, and are thus characterized by exterior manifestations of their religion. This sort of presence has made it possible for Bourguiba's successor, Ben Ali (president from 1987 to 2011), to practice forms of tolerance even more clearly, but always limited to formal relations; the Tunisians are still far from having a real understanding of the Catholic reality, with certain exceptions connected to relations on a personal and not structured plane, as was the case in the previous period. The arrival of a good number of young people from sub-Saharan Africa, most of all students, belonging to the JCAT, and personnel of the BAD has “Africanized” the Church in Tunisia and has brought about an increase in Christians' exterior manifestations; but this is a visibility that is not blatant but discreet, with the implicit risk of the Church continuing to be perceived as a sort of exterior body, alien to the country; nor can we say, lacking proper documentation, how it will be possible to build a bridge between different cultures through the “accompaniment” of Christian wives of Tunisians. Today, the Church is living in a country that has less and less need of it; its presence, in the schools and in health facilities, is extremely reduced. And also in other sectors of social commitment, such as care for the disabled, the number of clergymen involved is quite small. The ‘revolution’ in 2011 and the later developments up to the present have brought about another socio-political change, characterized by a climate of greater freedom, but with as yet undefinable contours. This change in the political climate will inevitable have consequences in Tunisia’s approach to religious and cultural minorities, but it is far too soon to discuss this on the historical and scientific planes.

Generalized semi-geostrophic theory on a sphere

Douglas, Robert; Cullen, M.J.P.; Roulston, I.; Sewell, M.J., (2005) 'Generalized semi-geostrophic theory on a sphere', Journal of Fluid Mechanics 531 pp.123-157 RAE2008

Radio tomography: A new experimental technique

Pryse, Sian, 'Radio tomography: A new experimental technique', Surveys in Geophysics (2003) 24 pp.1-38 RAE2008

Modele fizyczne planetoid pojedynczych i podwójnych otrzymane na podstawie przeglądów fotometrycznych: przygotowanie do naukowego wykorzystania danych z kosmicznej misji Gaia

Wydział Fizyki

Tectonics Inversions & Emerald Deposits

In spite of the great amount of emerald deposits throughout the world, the priorities in quality and volume of extracted rough material are the sites of Colombia (Muzo and Chivor emerald belts). This sites are know even before the Spanish conquistadores. Emeralds were extracted from Somondoco mine (today Chivor) since 1537 and from Muzo in 1567. Contrariwise to the majority of the emerald deposits of the world, which are associated with granitic rocks, the Colombian emerald deposits are associated with hydrofracturing (the main factor controlling emerald mineralization) and hydrothermal fluids, rich in beryl, chrome and vanadium, induced by a tectonic inversion of the deep Mesozoic backarc basin, which is also responsible of the majority of the petroleum systems of the foredeep and foldbelt areas (maturation of the source-rocks andcreation of structural traps). The host rocks of the emeralds are carbonaceous calsiltites (calcareous schists) rich in organic matter of Lower Cretaceous age, which are cut by calcite veins, which, often, contain emeralds, particularly when they are folded. Indeed, since long time (Cheilletz, A. and Giulliani, G., 1996) suggested a two-stage model for the formation of the Colombian emeralds : (i) Stage I is characterized by décollement planes (early compressional tectonic regime) within the carbonaceous calsiltites, hydrothermal fluid infiltration and wall-rock metasomatic alteration ; (ii) Stage II (late tectonic regime) deforms the previous veins by thrust-related folds (development of stratiform and hydraulic breccia), which are synchronous of the emerald mineralization. The resulting tectonic structures are complex fold patterns characterized by propagation anticlines with emerald veins and emerald hydraulic breccia in the apexes, as in Quipama, Tendenquema and Chivor mines. Otherwise stated, since all emerald exploitations are, presently underground, exhaustive geological and particularly structural studies are required to reduce the probability of disappointments. The color of emeralds is from light green to thick green with obvious pleochroism. They appears with different colors when observed at different angles, especially with polarized light. The emeralds from Coscuez deposits have a homogeneous intensive color and bluish tone. At Muzo deposit, the emeralds have middle or dark green color with yellowish tone. At the Chivor deposits, the emeralds have less intensive green color with slight bluish tone. The typical inclusions are albite and pyrite, as well as long bubbles with three phase-inclusions according the zones of growth and along the crystal shapes.

A study of stone fragmentation in shock wave lithotripsy by customizing the acoustic field and waveform shape

Shock wave lithotripsy is the preferred treatment modality for kidney stones in the United States. Despite clinical use for over twenty-five years, the mechanisms of stone fragmentation are still under debate. A piezoelectric array was employed to examine the effect of waveform shape and pressure distribution on stone fragmentation in lithotripsy. The array consisted of 170 elements placed on the inner surface of a 15 cm-radius spherical cap. Each element was driven independently using a 170 individual pulsers, each capable of generating 1.2 kV. The acoustic field was characterized using a fiber optic probe hydrophone with a bandwidth of 30 MHz and a spatial resolution of 100 μm. When all elements were driven simultaneously, the focal waveform was a shock wave with peak pressures p+ =65±3MPa and p−=−16±2MPa and the −6 dB focal region was 13 mm long and 2 mm wide. The delay for each element was the only control parameter for customizing the acoustic field and waveform shape, which was done with the aim of investigating the hypothesized mechanisms of stone fragmentation such as spallation, shear, squeezing, and cavitation. The acoustic field customization was achieved by employing the angular spectrum approach for modeling the forward wave propagation and regression of least square errors to determine the optimal set of delays. Results from the acoustic field customization routine and its implications on stone fragmentation will be discussed.

Articulated Pose Estimation in a Learned Smooth Space of Feasible Solutions

A learning based framework is proposed for estimating human body pose from a single image. Given a differentiable function that maps from pose space to image feature space, the goal is to invert the process: estimate the pose given only image features. The inversion is an ill-posed problem as the inverse mapping is a one to many process. Hence multiple solutions exist, and it is desirable to restrict the solution space to a smaller subset of feasible solutions. For example, not all human body poses are feasible due to anthropometric constraints. Since the space of feasible solutions may not admit a closed form description, the proposed framework seeks to exploit machine learning techniques to learn an approximation that is smoothly parameterized over such a space. One such technique is Gaussian Process Latent Variable Modelling. Scaled conjugate gradient is then used find the best matching pose in the space of feasible solutions when given an input image. The formulation allows easy incorporation of various constraints, e.g. temporal consistency and anthropometric constraints. The performance of the proposed approach is evaluated in the task of upper-body pose estimation from silhouettes and compared with the Specialized Mapping Architecture. The estimation accuracy of the Specialized Mapping Architecture is at least one standard deviation worse than the proposed approach in the experiments with synthetic data. In experiments with real video of humans performing gestures, the proposed approach produces qualitatively better estimation results.

Advanced polymer membrane development in pervaporation dehydration and lateral flow diagnostics

The work in this thesis concerns the advanced development of polymeric membranes of two types; pervaporation and lateral-flow. The former produced from a solution casting method and the latter from a phase separation. All membranes were produced from casting lacquers. Early research centred on the development of viable membranes. This led to a supported polymer blend pervaporation membrane. Selective layer: plasticized 4:1 mass ratio sodium-alginate: poly(vinyl-alcohol) polymer blend. Using this membrane, pervaporation separation of ethanol/water mixtures was carefully monitored as a function of film thickness and time. Contrary to literature expectations, these films showed increased selectivity and decreased flux as film thickness was reduced. It is argued that morphology and structure of the polymer blend changes with thickness and that these changes define membrane efficiency. Mixed matrix membrane development was done using spherical, discreet, size-monodisperse mesoporous silica particles of 1.8 - 2μm diameter, with pore diameters of ~1.8 nm were incorporated into a poly(vinyl alcohol) [PVA] matrix. Inclusion of silica benefitted pervaporation performance for the dehydration of ethanol, improving flux and selectivity throughout in all but the highest silica content samples. Early lateral-flow membrane research produced a membrane from a basic lacquer composition required for phase inversion; polymer, solvent and non-solvent. Results showed that bringing lacquers to cloud point benefits both the pore structure and skin layers of the membranes. Advancement of this work showed that incorporation of ethanol as a mesosolvent into the lacquer effectively enhances membrane pore structure resulting in an improvement in lateral flow rates of the final membranes. This project details the formation mechanics of pervaporation and lateral-flow membranes and how these can be controlled. The principle methods of control can be applied to the formation of any other flat sheet polymer membranes, opening many avenues of future membrane research and industrial application.

Simulation of multigate SOI transistors with silicon, germanium and III-V channels

In this work by employing numerical three-dimensional simulations we study the electrical performance and short channel behavior of several multi-gate transistors based on advanced SOI technology. These include FinFETs, triple-gate and gate-all-around nanowire FETs with different channel material, namely Si, Ge, and III-V compound semiconductors, all most promising candidates for future nanoscale CMOS technologies. Also, a new type of transistor called “junctionless nanowire transistor” is presented and extensive simulations are carried out to study its electrical characteristics and compare with the conventional inversion- and accumulation-mode transistors. We study the influence of device properties such as different channel material and orientation, dimensions, and doping concentration as well as quantum effects on the performance of multi-gate SOI transistors. For the modeled n-channel nanowire devices we found that at very small cross sections the nanowires with silicon channel are more immune to short channel effects. Interestingly, the mobility of the channel material is not as significant in determining the device performance in ultrashort channels as other material properties such as the dielectric constant and the effective mass. Better electrostatic control is achieved in materials with smaller dielectric constant and smaller source-to-drain tunneling currents are observed in channels with higher transport effective mass. This explains our results on Si-based devices. In addition to using the commercial TCAD software (Silvaco and Synopsys TCAD), we have developed a three-dimensional Schrödinger-Poisson solver based on the non-equilibrium Green’s functions formalism and in the framework of effective mass approximation. This allows studying the influence of quantum effects on electrical performance of ultra-scaled devices. We have implemented different mode-space methodologies in our 3D quantum-mechanical simulator and moreover introduced a new method to deal with discontinuities in the device structures which is much faster than the coupled-mode-space approach.

The expression and regulation of pregnancy-specific glycoproteins in the mouse

Pregnancy-Specific Glycoproteins (PSG) are the most abundant fetally expressed proteins in the maternal bloodstream at term. This multigene family are immunoglobulin superfamily members and are predominantly expressed in the syncytiotrophoblast of human placenta and in giant cells and spongiotrophoblast of rodent placenta. PSGs are encoded by seventeen genes in the mouse and ten genes in the human. Little is known about the function of this gene family, although they have been implicated in immune modulation and angiogenesis through the induction of cytokines such as IL-10 and TGFβ1 in monocytes, and more recently, have been shown to inhibit the platelet-fibrinogen interaction. I provide new information concerning the evolution of the murine Psg genomic locus structure and organisation, through the discovery of a recent gene inversion event of Psg22 within the major murine Psg cluster. In addition to this, I have performed an examination of the expression patterns of individual Psg genes in placental and non-placental tissues. This study centres on Psg22, which is the most abundant murine Psg transcript detected in the first half of pregnancy. A novel alternative splice variant transcript of Psg22 lacking the protein N1-domain was discovered, and similar to the full length isoform induces TGFβ1 in macrophage and monocytic cell lines. The identification of a bidirectional antisense long non-coding RNA transcript directly adjacent to Psg22 and its associated active local chromatin conformation, suggests an interesting epigenetic gene-specific regulatory mechanism that may be responsible for the high level of Psg22 expression relative to the other Psg family members upon trophoblast giant cell differentiation

All-optical signal processing using semiconductor optical amplifiers for next generation optical networks

This thesis details an experimental and simulation investigation of some novel all-optical signal processing techniques for future optical communication networks. These all-optical techniques include modulation format conversion, phase discrimination and clock recovery. The methods detailed in this thesis use the nonlinearities associated with semiconductor optical amplifiers (SOA) to manipulate signals in the optical domain. Chapter 1 provides an introduction into the work detailed in this thesis, discusses the increased demand for capacity in today’s optical fibre networks and finally explains why all-optical signal processing may be of interest for future optical networks. Chapter 2 discusses the relevant background information required to fully understand the all-optical techniques demonstrated in this thesis. Chapter 3 details some pump-probe measurement techniques used to calculate the gain and phase recovery times of a long SOA. A remarkably fast gain recovery is observed and the wavelength dependent nature of this recovery is investigated. Chapter 4 discusses the experimental demonstration of an all-optical modulation conversion technique which can convert on-off- keyed data into either duobinary or alternative mark inversion. In Chapter 5 a novel phase sensitive frequency conversion scheme capable of extracting the two orthogonal components of a quadrature phase modulated signal into two separate frequencies is demonstrated. Chapter 6 investigates a novel all-optical clock recovery technique for phase modulated optical orthogonal frequency division multiplexing superchannels and finally Chapter 7 provides a brief conclusion.

VISION OF EQUINOX FOR ORCHESTRA

The artistic play of light seen on a pyramid in some Mayan ruins located in Cancun, Mexico provided the inspiration for Vision of Equinox. On both the spring and autumn equinox days, the sunlight projected on the pyramid forms a shape which looks like a serpent moving on the stairway of the pyramid. Vision of Equinox was composed with an image of light as the model for the artistic transfiguration of sound. The light image of sound changes its shape in each stage of the piece, using the orchestra in different ways - sometimes like a chamber ensemble, sometimes like one big instrument. The image of light casting on a pyramid is expressed by descending melodic lines that can be heard several times in the piece. At the final climax of the work, a complete and embodied artistic figure is formed and stated, expressing the appearance of the Mayan god Quetzalcoatl, the serpent, in my own imagination. The light and shadow which comprise this pyramid art are treated as two contrasting elements in my composition and become the two main motives in this piece. To express these two contrasting elements, I picked the numbers "5" and "2," and used them as "key numbers" in this piece. As a result, the intervals of a fifth and a second (sometimes inverted as a seventh) are the two main intervals used in the structure. The interval of a fifth was taken into account for the construction of the pyramid, which has five points of contact. The interval of a second was selected as a contrasting sonority to the fifth. Further, the numbers "5" and "2" are used as the number of notes which form the main motives in this piece; quintuplets are used throughout this piece, and the short motive made by two sixteenth notes is used as one of the main motives in this piece. Moreover, the shape of the pyramid provided a concept of symmetry, which is expressed by the setting of a central point of the music (pitch center) as well as the use of retrograde and inversion in this piece.

Accelerating self-consistent field convergence with the augmented Roothaan-Hall energy function.

Based on Pulay's direct inversion iterative subspace (DIIS) approach, we present a method to accelerate self-consistent field (SCF) convergence. In this method, the quadratic augmented Roothaan-Hall (ARH) energy function, proposed recently by Høst and co-workers [J. Chem. Phys. 129, 124106 (2008)], is used as the object of minimization for obtaining the linear coefficients of Fock matrices within DIIS. This differs from the traditional DIIS of Pulay, which uses an object function derived from the commutator of the density and Fock matrices. Our results show that the present algorithm, abbreviated ADIIS, is more robust and efficient than the energy-DIIS (EDIIS) approach. In particular, several examples demonstrate that the combination of ADIIS and DIIS ("ADIIS+DIIS") is highly reliable and efficient in accelerating SCF convergence.