Spray coating technique asa surface treatment for woodcontaining paper grades

The objective of this work was to introduce the emerging non-contacting spray coating process and compare it to the existing coating techniques. Particular emphasis was given to the details of the spraying process of paper coating colour and the base paper requirements set by the new coating method. Spraying technology itself is nothing new, but the atomisation process of paper coating colour is quite unknown to the paper industry. The differences between the rheology of painting and coating colours make it very difficult to utilise the existing information from spray painting research. Based on the trials, some basic conclusion can be made:The results of this study suggest that the Brookfield viscosity of spray coating colour should be as low as possible, presently a 50 mPas level is regarded as an optimum. For the paper quality and coater runnability, the solids level should be as high as possible. However, the graininess of coated paper surface and the nozzle wear limits the maximum solids level to 60 % at the moment. Most likelydue to the low solids and low viscosity of the coating colour the low shear Brookfield viscosity correlates very well with the paper and spray fan qualities. High shear viscosity is also important, but yet less significant than the low shear viscosity. Droplet size should be minimized and besides keeping the brrokfield viscosity low that can be helped by using a surfactant or dispersing agent in the coating colour formula. Increasing the spraying pressure in the nozzle can also reduce the droplet size. The small droplet size also improves the coating coverage, since there is hardly any levelling taking place after the impact with the base paper. Because of the lack of shear forces after the application, the pigment particles do not orientate along the paper surface. Therefore the study indicates that based on the present know-how, no quality improvements can be obtained by the use of platy type of pigments. The other disadvantage of them is the rapid deterioration of the nozzle lifetime. Further research in both coating colour rheology and nozzle design may change this in the future, but so far only round shape pigments, like typically calcium carbonate is, can be used with spray coating. The low water retention characteristics of spray coating, enhanced by the low solids and low viscosity, challenge the base paper absorption properties.Filler level has to be low not to increase the number of small pores, which have a great influence on the absorption properties of the base paper. Hydrophobic sizing reduces this absorption and prevents binder migration efficiently. High surface roughness and especially poor formation of the base paper deteriorate thespray coated paper properties. However, pre-calendering of the base paper does not contribute anything to the finished paper quality, at least at the coating colour solids level below 60 %. When targeting a standard offset LWC grade, spraycoating produces similar quality to film coating, but yet blade coating being on a slightly better level. However, because of the savings in both investment and production costs, spray coating may have an excellent future ahead. The porousnature of the spray coated surface offers an optimum substrate for the coldset printing industry to utilise the potential of high quality papers in their business.

Induction motor versus permanent magnet synchronous motor in motion control applications: a comparative study

High dynamic performance of an electric motor is a fundamental prerequisite in motion control applications, also known as servo drives. Recent developments in the field of microprocessors and power electronics have enabled faster and faster movements with an electric motor. In such a dynamically demanding application, the dimensioning of the motor differs substantially from the industrial motor design, where feasible characteristics of the motor are for example high efficiency, a high power factor, and a low price. In motion control instead, such characteristics as high overloading capability, high-speed operation, high torque density and low inertia are required. The thesis investigates how the dimensioning of a high-performance servomotor differs from the dimensioning of industrial motors. The two most common servomotor types are examined; an induction motor and apermanent magnet synchronous motor. The suitability of these two motor types indynamically demanding servo applications is assessed, and the design aspects that optimize the servo characteristics of the motors are analyzed. Operating characteristics of a high performance motor are studied, and some methods for improvements are suggested. The main focus is on the induction machine, which is frequently compared to the permanent magnet synchronous motor. A 4 kW prototype induction motor was designed and manufactured for the verification of the simulation results in the laboratory conditions. Also a dynamic simulation model for estimating the thermal behaviour of the induction motor in servo applications was constructed. The accuracy of the model was improved by coupling it with the electromagnetic motor model in order to take into account the variations in the motor electromagnetic characteristics due to the temperature rise.

Effect of Mechanical and Geometric Mismatching on Fatigue and Damage of Welded Joints

The future of high technology welded constructions will be characterised by higher strength materials and improved weld quality with respect to fatigue resistance. The expected implementation of high quality high strength steel welds will require that more attention be given to the issues of crack initiation and mechanical mismatching. Experiments and finite element analyses were performed within the framework of continuum damage mechanics to investigate the effect of mismatching of welded joints on void nucleation and coalescence during monotonic loading. It was found that the damage of undermatched joints mainly occurred in the sandwich layer and the damageresistance of the joints decreases with the decrease of the sandwich layer width. The damage of over-matched joints mainly occurred in the base metal adjacent to the sandwich layer and the damage resistance of the joints increases with thedecrease of the sandwich layer width. The mechanisms of the initiation of the micro voids/cracks were found to be cracking of the inclusions or the embrittled second phase, and the debonding of the inclusions from the matrix. Experimental fatigue crack growth rate testing showed that the fatigue life of under-matched central crack panel specimens is longer than that of over-matched and even-matched specimens. Further investigation by the elastic-plastic finite element analysis indicated that fatigue crack closure, which originated from the inhomogeneousyielding adjacent to the crack tip, played an important role in the fatigue crack propagation. The applicability of the J integral concept to the mismatched specimens with crack extension under cyclic loading was assessed. The concept of fatigue class used by the International Institute of Welding was introduced in the parametric numerical analysis of several welded joints. The effect of weld geometry and load condition on fatigue strength of ferrite-pearlite steel joints was systematically evaluated based on linear elastic fracture mechanics. Joint types included lap joints, angle joints and butt joints. Various combinations of the tensile and bending loads were considered during the evaluation with the emphasis focused on the existence of both root and toe cracks. For a lap joint with asmall lack-of-penetration, a reasonably large weld leg and smaller flank angle were recommended for engineering practice in order to achieve higher fatigue strength. It was found that the fatigue strength of the angle joint depended strongly on the location and orientation of the preexisting crack-like welding defects, even if the joint was welded with full penetration. It is commonly believed that the double sided butt welds can have significantly higher fatigue strength than that of a single sided welds, but fatigue crack initiation and propagation can originate from the weld root if the welding procedure results in a partial penetration. It is clearly shown that the fatigue strength of the butt joint could be improved remarkably by ensuring full penetration. Nevertheless, increasing the fatigue strength of a butt joint by increasing the size of the weld is an uneconomical alternative.

Studies on the characterization of dental whitening process by using both hyperspectral imaging and colorimeter techniques

A beautiful smile is directly related with white teeth. Nowadays oral care has increased and developed processes for beautiful smiles. Dental bleaching is frequently used in odontology, not just for health care also for aesthetic treatment. With the possibility of teeth bleaching, now the importance is in, how white the tooth is? Because color is relate to an individual perception. In order to assets teeth correct color identification has been developed many color guides, models, spaces and analytical methods. Spite all of these useful tools the color interpretation depends on environmental factors, position of the sample in the data acquisition and most importantly the instrument sensitivity. The commons methods have proved to be useful. They are easy to handle, some are portable but they do not have a high sensitivity. The present work is based on the integration of a new analytical technique for color acquisition. High spectral Image (HSI) is able to performed image analysis with high quality and efficiency. HSI is used in many fields and we used it for color image analysis within the bleaching process. The main comparison was done with the HSI and the colorimeter through the processes of two different bleaching protocols. The results showed that HSI has higher sensitivity than the colorimeter. During the analysis the dental surface with the HSI we were able to notice surface changes. These changes were analyzed by roughness studies.

Effects of nitrogen supply on wheat and on soil nitrate

Field experiments were conducted at two locations during two growing seasons in the Ebro Valley (Spain), to evaluate the effects of N fertilization on yield and quality of Mediterranean-type wheat in irrigated conditions. Seven N treatments and a control were investigated. The average grain yields ranged from 2117 to 5551 kg ha-1 depending on the year and location. Grain protein ranged from 14.25 to 16.9%, and other quality parameters such as the dough strength (W) also varied with year and location, confirming the suitability of Mediterranean-type wheat and the climate for the production of good bread-making quality wheat. However, grain yields are normally low and both yields and quality can be greatly affected by the variability of this type of climate, even under irrigation. Under these conditions, grain yield increases were mainly due to an increase in the number of grains per m2 without a reduction in the N content per spike, suggesting that N in the grain was not source-limited, possibly due to the lower grain yields and relatively high soil nitrate concentrations. In soils with lower initial soil NO-3N contents, better grain yields could be achieved by applying a N fertilizer rate of about 100 kg N ha-1, whereas in soils with high initial NO-3N contents, no N or a maximum rate of 50 kg N ha-1 is needed to obtain a good grain quality, showing the possibility of producing high-quality wheat with a low amount of N fertilizer and thus increasing the sustainability of the cropping system.

Estacions termals en zones rurals, serveis associats i titulacions oficials

El turisme rural, l’esport i la salut han adquirit de forma progressiva en els últims anys una importància cada vegada més gran. Una part creixent de la població ha anat incorporant de mica en mica dies de descans i repòs durant tot l’any. Aquesta realitat és deguda, parcialment, a l’augment del temps lliure i a la consideració del seu gaudi com un element per a la millora de la qualitat de vida. El turisme rural, a causa del canvi de valors experimentat en la societat contemporània, s’interrelaciona amb altres productes, com ara el turisme termal i les activitats esportives realitzades en contacte amb la natura, igual que amb altres serveis del sector del lleure, com ara l’espectacle, el joc, la cultura, etc. Aquesta situació determina la necessitat de plantejar sistemes de gestió professionals i aplicar estratègies que permetin de generar factors competitius i diferenciadors. Les empreses turístiques que han adoptat el paradigma empresarial de la gestió de qualitat total es caracteritzen per oferir qualitat de servei, i per assolir aquesta qualitat cal disposar d’un equip d’especialistes altament qualificats i experimentats. El propòsit d’aquest treball és analitzar les titulacions oficials relacionades amb les estacions termals en zones rurals i els serveis associats.

Estaciones termales en zonas rurales, servicios asociados y titulaciones oficiales

El turismo rural, el deporte y la salud han venido adquiriendo de forma progresiva en los últimos años una importancia cada vez mayor. Una parte creciente de la población ha ido incorporando paulatinamente días de descanso y reposo durante todo el año. Esta realidad es debida, en parte, al aumento del tiempo libre y a la consideración de su disfrute como un elemento para la mejora de la calidad de vida. El turismo rural, debido al cambio de valores sufrido en la sociedad contemporánea, se interrelaciona con otros productos como el turismo termal y las actividades deportivas realizadas en contacto con la naturaleza, al igual que con otros servicios del sector ocio, como pueden ser el espectáculo, el juego, la cultura, etc. Esta situación determina la necesidad de plantear sistemas de gestión profesionales y aplicar estrategias que permitan generar factores competitivos y diferenciadores. Las empresas turísticas que han adoptado el paradigma empresarial de la gestión de calidad total se caracterizan por ofrecer calidad de servicio, y para alcanzar dicha calidad es necesario disponer de un equipo de especialistas altamente cualificados y experimentados. El propósito de este trabajo es analizar las titulaciones oficiales relacionadas con las estaciones termales en zonas rurales y los servicios asociados.

Postmortem magnetic resonance imaging of the heart ex situ: development of technical protocols.

Postmortem MRI (PMMR) examinations are seldom performed in legal medicine due to long examination times, unfamiliarity with the technique, and high costs. Furthermore, it is difficult to obtain access to an MRI device used for patients in clinical settings to image an entire human body. An alternative is available: ex situ organ examination. To our knowledge, there is no standardized protocol that includes ex situ organ preparation and scanning parameters for postmortem MRI. Thus, our objective was to develop a standard procedure for ex situ heart PMMR examinations. We also tested the oily contrast agent Angiofil® commonly used for PMCT angiography, for its applicability in MRI. We worked with a 3 Tesla MRI device and 32-channel head coils. Twelve porcine hearts were used to test different materials to find the best way to prepare and place organs in the device and to test scanning parameters. For coronary MR angiography, we tested different mixtures of Angiofil® and different injection materials. In a second step, 17 human hearts were examined to test the procedure and its applicability to human organs. We established two standardized protocols: one for preparation of the heart and another for scanning parameters based on experience in clinical practice. The established protocols enabled a standardized technical procedure with comparable radiological images, allowing for easy radiological reading. The performance of coronary MR angiography enabled detailed coronary assessment and revealed the utility of Angiofil® as a contrast agent for PMMR. Our simple, reproducible method for performing heart examinations ex situ yields high quality images and visualization of the coronary arteries.

Viticultura de precisión: predicción de cosecha a partir de variables del cultivo e índices de vegetación

El presente trabajo muestra los resultados provisionales de un proyecto de viticultura de precisión, llevado a cabo entre la Universidad de Lleida y la empresa Codorníu, S.A., con el objeto de predecir el rendimiento, de forma localizada, de diferentes variedades de viña para la producción de vinos y cavas de calidad. Las variables de cultivo muestreadas de forma detallada han sido: número de yemas, número de brotes, número de racimos, peso de la poda, vigor del cultivo y cosecha del año anterior (2003). El vigor del cultivo se ha extraído de una imagen multiespectral Quickbird 2. Estas variables se han analizado en un modelo de regresión múltiple con la cosecha del año 2004 (variable dependiente), ofreciendo diferentes ajustes según la variedad considerada y variables incorporadas en el análisis.

Una nueva obra atribuida a Urbano Fos (Arnes, Tarragona, c. 1615-Valencia, 1658)

Urbano Fos fue uno de los mejores representantes del Barroco valenciano. En este estudio atribuimos a su pincel un lienzo inédito de gran calidad. Se trata de una magnífica representación de San Pascual Bailón. Con nuestra investigación hemos demostrado sus filiaciones técnico-artísticas y resaltado aquellos aspectos por los que se popularizó su pintura.

Yksityisrahoitteinen aluerakentaminen

Diplomityön tavoitteena oli tutkia yksityisrahoitusmallin soveltuvuutta julkisen sektorin palvelutuotantoon sekä kuvata yksityisrahoitteisen aluerakentamishankkeen sisältö ja liiketoimintaprosessin eteneminen hankkeen ideasta konsessiosopimuksen päättymiseen asti.Huoltosuhteen muuttumisen lisäksi muuttoliike kasvukeskuksiin lisää julkisen sektorin paineita tuottaa skandinaavisen hyvinvointiyhteiskuntamme vaatimusten mukaisia palveluita. Julkinen sektori onkin ajautunut tilanteeseen, jossa vaihtoehtoina ovat sen tuottamien palveluiden supistaminen ja maksullistaminen tai tuotantomuotojen kehittäminen.Työssä esitetty yksityisrahoitteinen aluerakentamismalli mahdollistaa laadukkaiden julkisten palveluiden tuottamisen oikea-aikaisesti ja kustannustehokkaasti. Tässä uudessa aluerakentamisen mallissa yksityinen sektori rahoittaisi, rakentaisi sekä operoisi ja ylläpitäisi määräajan perinteisesti kunnalle kuuluneita infrastruktuuri- ja palveluhankkeita.Tutkimuksen keskeinen tulos on yksityisrahoitteisen aluerakentamisen liiketoimintaprosessikaavio. Liiketoimintaprosessin kuvaus edesauttaa monimutkaisen prosessin ymmärtämistä ja mahdollistaa yksityisrahoitteisen aluerakentamismallin edelleen kehittämisen sekä sen markkinoinnin julkiselle ja yksityiselle sektorille. Liiketoimintaprosessikaaviossa kuvataan prosessin osapuolet ja prosessin eteneminen julkisen ja yksityisen sektorin tarpeesta ja YIT:n liikeideasta aina alueen rakentamiseen, operointiin, ylläpitoon ja palvelutuotannon siirtoon julkiselle ja yksityiselle sektorille

Characteristics of Flowing Film

Työssä tutkittiin uutta teknologiaa pigmenttipäällystykseen. Tämä tekniikka on yleisesti tunnettua eräillä muilla teollisuudenaloilla. Kirjallisuustutkimuksessa on esitelty prosessia ja sen eri osatekijöitä sekä muilla aloilla tunnettuja prosessimuuttujia. Päällystyspastojen ja päällystettävien pintojen teoriaa on selvitetty uuden tekniikan ja pigmenttipäällystyksen valossa. Uuden tekniikan perusmekanismeja tutkittiin kokeellisessa osassa. Valuvan nestefilmin stabiilisuutta tutkittiin minimivirtauksen avulla. Stabiilisuustutkimuksen suorittamiseen käytettiin apuna Taguchi-matriisia DOE-ohjelmalla (Design of Experiments). Kokeiden perusteella minimivirtauksen kannalta päällystyspastalle edullisempi koostumus on kalsiumkarbonaatti- kuin kaoliinipasta. Sideaineella on pienempi osuus lateksia ja polyvinyylialkoholia parempi. Suurempi osuus pinta-aktiivista ainetta ja matala pastan kuiva-ainepitoisuus ovat suositeltuja. Tehokas ilmanpoisto päällystyspastasta on myös tärkeää lopullisen tuloksen kannalta. Koekoneella ajetuissa päällystyskokeissa havaittiin valuvan filmin ominaisuuksien tärkeys. Pienetkin kaasumäärät päällystyspastassa häiritsivät lopullisen päällysteen laatua. Päällystyspastan ilmanpoisto on avainasemassa erityisesti kun päällystetään suurella nopeudella pieniä päällystemääriä. Koeajoissa havaittiin kaikki kirjallisuudessa esitellyt rajoittavat tekijät. Kokeissa päällystettiin 400-1600 m/min nopeudella 5-20 g/m² päällystemääriä. Olosuhteet stabiilille nestefilmille vaativat edelleen kehitystä suurella nopeudella päällystettäessä. Päällysteen eroavaisuuksia verrattiin teräpäällystysmenetelmiin. Terä-päällystyksellä saadaan sileä mutta epätasaisesti peittävä pinta kun taas uuden tekniikan päällyste mukailee päällystettävän alustan topografiaa. Tasapaksun päällysteen etuna on hyvä peittävyys jo pienellä päällystemäärällä.

Grafting of Araucaria angustifolia (BERTOL.) kuntze through the four seasons of the year

Araucaria angustifolia is an endangered conifer species of South America that has been over exploited for timber. To incentivize Araucaria angustifolia planting is essential and may play a key role on the conservation of this species and the ecosystems that depend on it. Hence, techniques that allow the production of seedlings with attributes that may entice farmers to plant A. angustifolia trees are very important. Grafting may permit the selection of female trees and the production of precocious plants that will produce high quality seeds. The aim of this study was to determine the best season of the year to graft. Three-year-old seedlings were used as rootstock and orthotropic branches of young plants were used for scion collection. The technique used for the grafting was the bark patch. This procedure was carried out in the beginning of each season in 2007 and 2008, with a total of 160 grafted plants. Grafting carried out in the beginning of autumn had a 50 % success rate. Grafting success was negligible for all remaining seasons. In conclusion, grafting through bark patching is a viable technique for the production of A. angustifolia seedlings. Future research should be carried out to produce grafted seedlings in large-scale.

New TTCN interfaces for WCDMA base station testing

WCDMA tukiasema (Node B) on osa UMTS-järjestelmän radioverkkoa. Node B on tärkeä verkkoelementti, jonka tarkoituksena on yhdistää mobiilikäyttäjät verkkoon. Telecom –ohjelmisto (TCOM SW) on vastuussa suuresta osasta Node B:n toiminnallisuutta. TCOM SW:n testaukseen käytetään paljon resursseja, jotta ohjelmiston oikeasta toiminnasta ja laadusta voidaan varmistua. System component testing on testausvaihe, jossa järjestelmän (Node B) osa (system component, tässä diplomityössä TCOM SW) testataan ennen sen integroimista muuhun järjestelmään. Tähän tarvitaan testityökalu ja testitapausten toteutus. Node B TTCN Tester (testeri) on työkalu, jota käytetään Node B:n ohjelmiston testauksessa. Testitapaukset toteutetaan TTCN-testinotaatiota käyttäen ja testataan testerin avulla. TCOM SW:n system component –testausvaihetta varten testeriin lisättiin uudet rajapinnat, joiden avulla voidaan simuloita Node B:n ATM-ohjelmistoa sekä WPA- ja WTR-yksiköitä. Tässä diplomityössä toteuttiin TTCN testitapaukset uusille rajapinnoille. Testitapaukset tekivät TCOM SW system component –testausvaiheen riippumattomaksi Node B:n ATM-ohjelmistosta sekä WPA- ja WTR-yksiköistä. Lisäksi TCOM SW:n toiminnan testaus näissä rajapinnoissa voidaan tästä lähtien tehdä automaattisesti. Testitapauksien toiminta varmistettiin testeriä käyttäen. Tulokset olivat hyviä, uudet testitapaukset ja TTCN rajapinnat toimivat oikein lisäten testauksen tehokkuutta.

Exploring transparent approaches to the authentication of signatures on artwork

This thesis is composed of three main parts. The first consists of a state of the art of the different notions that are significant to understand the elements surrounding art authentication in general, and of signatures in particular, and that the author deemed them necessary to fully grasp the microcosm that makes up this particular market. Individuals with a solid knowledge of the art and expertise area, and that are particularly interested in the present study are advised to advance directly to the fourth Chapter. The expertise of the signature, it's reliability, and the factors impacting the expert's conclusions are brought forward. The final aim of the state of the art is to offer a general list of recommendations based on an exhaustive review of the current literature and given in light of all of the exposed issues. These guidelines are specifically formulated for the expertise of signatures on paintings, but can also be applied to wider themes in the area of signature examination. The second part of this thesis covers the experimental stages of the research. It consists of the method developed to authenticate painted signatures on works of art. This method is articulated around several main objectives: defining measurable features on painted signatures and defining their relevance in order to establish the separation capacities between groups of authentic and simulated signatures. For the first time, numerical analyses of painted signatures have been obtained and are used to attribute their authorship to given artists. An in-depth discussion of the developed method constitutes the third and final part of this study. It evaluates the opportunities and constraints when applied by signature and handwriting experts in forensic science. A brief summary covering each chapter allows a rapid overview of the study and summarizes the aims and main themes of each chapter. These outlines presented below summarize the aims and main themes addressed in each chapter. Part I - Theory Chapter 1 exposes legal aspects surrounding the authentication of works of art by art experts. The definition of what is legally authentic, the quality and types of the experts that can express an opinion concerning the authorship of a specific painting, and standard deontological rules are addressed. The practices applied in Switzerland will be specifically dealt with. Chapter 2 presents an overview of the different scientific analyses that can be carried out on paintings (from the canvas to the top coat). Scientific examinations of works of art have become more common, as more and more museums equip themselves with laboratories, thus an understanding of their role in the art authentication process is vital. The added value that a signature expertise can have in comparison to other scientific techniques is also addressed. Chapter 3 provides a historical overview of the signature on paintings throughout the ages, in order to offer the reader an understanding of the origin of the signature on works of art and its evolution through time. An explanation is given on the transitions that the signature went through from the 15th century on and how it progressively took on its widely known modern form. Both this chapter and chapter 2 are presented to show the reader the rich sources of information that can be provided to describe a painting, and how the signature is one of these sources. Chapter 4 focuses on the different hypotheses the FHE must keep in mind when examining a painted signature, since a number of scenarios can be encountered when dealing with signatures on works of art. The different forms of signatures, as well as the variables that may have an influence on the painted signatures, are also presented. Finally, the current state of knowledge of the examination procedure of signatures in forensic science in general, and in particular for painted signatures, is exposed. The state of the art of the assessment of the authorship of signatures on paintings is established and discussed in light of the theoretical facets mentioned previously. Chapter 5 considers key elements that can have an impact on the FHE during his or her2 examinations. This includes a discussion on elements such as the skill, confidence and competence of an expert, as well as the potential bias effects he might encounter. A better understanding of elements surrounding handwriting examinations, to, in turn, better communicate results and conclusions to an audience, is also undertaken. Chapter 6 reviews the judicial acceptance of signature analysis in Courts and closes the state of the art section of this thesis. This chapter brings forward the current issues pertaining to the appreciation of this expertise by the non- forensic community, and will discuss the increasing number of claims of the unscientific nature of signature authentication. The necessity to aim for more scientific, comprehensive and transparent authentication methods will be discussed. The theoretical part of this thesis is concluded by a series of general recommendations for forensic handwriting examiners in forensic science, specifically for the expertise of signatures on paintings. These recommendations stem from the exhaustive review of the literature and the issues exposed from this review and can also be applied to the traditional examination of signatures (on paper). Part II - Experimental part Chapter 7 describes and defines the sampling, extraction and analysis phases of the research. The sampling stage of artists' signatures and their respective simulations are presented, followed by the steps that were undertaken to extract and determine sets of characteristics, specific to each artist, that describe their signatures. The method is based on a study of five artists and a group of individuals acting as forgers for the sake of this study. Finally, the analysis procedure of these characteristics to assess of the strength of evidence, and based on a Bayesian reasoning process, is presented. Chapter 8 outlines the results concerning both the artist and simulation corpuses after their optical observation, followed by the results of the analysis phase of the research. The feature selection process and the likelihood ratio evaluation are the main themes that are addressed. The discrimination power between both corpuses is illustrated through multivariate analysis. Part III - Discussion Chapter 9 discusses the materials, the methods, and the obtained results of the research. The opportunities, but also constraints and limits, of the developed method are exposed. Future works that can be carried out subsequent to the results of the study are also presented. Chapter 10, the last chapter of this thesis, proposes a strategy to incorporate the model developed in the last chapters into the traditional signature expertise procedures. Thus, the strength of this expertise is discussed in conjunction with the traditional conclusions reached by forensic handwriting examiners in forensic science. Finally, this chapter summarizes and advocates a list of formal recommendations for good practices for handwriting examiners. In conclusion, the research highlights the interdisciplinary aspect of signature examination of signatures on paintings. The current state of knowledge of the judicial quality of art experts, along with the scientific and historical analysis of paintings and signatures, are overviewed to give the reader a feel of the different factors that have an impact on this particular subject. The temperamental acceptance of forensic signature analysis in court, also presented in the state of the art, explicitly demonstrates the necessity of a better recognition of signature expertise by courts of law. This general acceptance, however, can only be achieved by producing high quality results through a well-defined examination process. This research offers an original approach to attribute a painted signature to a certain artist: for the first time, a probabilistic model used to measure the discriminative potential between authentic and simulated painted signatures is studied. The opportunities and limits that lie within this method of scientifically establishing the authorship of signatures on works of art are thus presented. In addition, the second key contribution of this work proposes a procedure to combine the developed method into that used traditionally signature experts in forensic science. Such an implementation into the holistic traditional signature examination casework is a large step providing the forensic, judicial and art communities with a solid-based reasoning framework for the examination of signatures on paintings. The framework and preliminary results associated with this research have been published (Montani, 2009a) and presented at international forensic science conferences (Montani, 2009b; Montani, 2012).