Manipulus Rubiacearum - V. A revision of the genus Capirona.

The taxonomic histort of the genus Capirona is presented. Complete synonymies, descriptions, common names, distributions and discussions are given for Capirona and its two species C. descorticans and C. leiophloea. The generic distribution is the Amazon valley and eastern Guianas and coincides with that of the genus Hevea. C. descorticans is know from the western and southeastern Amazon valley; C. leiophloea is reported from the eastern Guianas and the northeastern Amazon valley. The zone of contact between the two species is along the southern edge oh the Amazon River and the lower drainage of the Rio Tapajoz in Pará, Brazil.

A proposed Pleistocene/Holocene lake in the Amazon basin and its significance to Amazonian geology and biogeography

Recent studies have described widespread statigraphic units of Late Pleistocene and Holocene age in the western part of the Amazon Basin. The recognition of deltaic sedimentation in the uppermost these units near Rio Branco, Brazil, at a modern elevation of approximately 500 feett leads to the conclusion that this area was situated on the edge of a large Amazonian lake that existed in the recent past when Andean tectonism caused active downwarping of the western edge of the Amazon Basin. The ramifications of this "Lago Anazonas" hypothesis extend into every area of modern Amazonian geology and biology.

Primate populations in continuous forest and forest fragments in Central Amazonia

Population densities of six primate species (Saguinus midas, Pithecia pithecia, Cebus apella, Chiropotes satanas, Alouatta seniculus and Ateles paniscus) were estimated in continuous forest and in isolated reserves (one of 100 ha and four of 10 ha). Saguinusdensities in the continuous forest were found to be low, probably due to the lack of edge habitat and second growth favoured by them; Pithecia, Cebus and Ateles populations are also low, possibly because of more widely distributed and/or less abundant food sources than is true for other Amazonian regions, although hunting in the past, particularly of Ateles may also be a contributing factor; and Chiropotes and Alouatta densities were found to be similar to those observed in other areas of Amazonas forests. Ateles and Chiropotes, which occupy ranges on the order of three km2 were excluded from the 100-ka reserve at the time of its isolation. Unfortunately populations were not known prior to isolation of this reserve but during isolation there remained four groups of Saguinus, two Pitheciagroups, one Cebus groups and five Alouatta groups. One Saguinus group disappeared two months later, and one year post-isolation the Cebus group also left the reserve. Single Alouatta groups survive in the isolated 10-ha reserves. Saguinus, present in the four 10-ha reserves following isolation, have disappeared from two of them. One 10-ha reserve retains a group of Pithecia.

Chlorite Dismutase from perchlorate reducing bacteria. A potential biocatalyst to eliminate chlorinated species from polluted water resources and industrial wastes

Magnetospirillum (M.) sp. strain Lusitani, a perchlorate reducing bacteria (PRB), was previously isolated from a wastewater treatment plant and phylogenetic analysis was performed to classify the isolate. The DNA sequence of the genes responsible for perchlorate reduction and chlorite dismutation was determined and a model was designed based on the physiological roles of the proteins involved in the pcr-cld regulon. Chlorite dismutase (Cld) was purified from Magnetospirillum sp. strain Lusitani cells grown in anaerobiosis in the presence of perchlorate. The protein was purified up to electrophoretic grade using HPLC techniques as a 140 kDa homopentamer comprising five ~28 kDa monomers. Steady-state kinetic studies showed that the enzyme follows a Michaelis-Menten model with optimal pH and temperature of 6.0 and 5°C, respectively. The average values for the kinetic constants KM and Vmax were respectively 0.56 mM and 10.2 U, which correspond to a specific activity of 35470 U/mg and a turnover number of 16552 s-1. Cld from M. sp. strain Lusitani is inhibited by the product chloride, but not by dioxygen. Inhibition constants KiC= 460 mM and KiU= 480 mM indicated that sodium chloride is a weak mixed inhibitor of Cld, with a slightly stronger competitive character. The X-ray crystallography structure of M. sp. strain Lusitani Cld was solved at 3.0 Å resolution. In agreement with cofactor content biochemical analysis, the X-ray data showed that each Cld monomer harbors one heme b coordinated by a histidine residue (His188), hydrogen-bonded to a conserved glutamic acid residue (Glu238). The conserved neighboring arginine residue (Arg201) important for substrate positioning, was found in two different conformations in different monomers depending on the presence of the exogenous ligand thiocyanate. UV-Visible and CW-EPR spectroscopies were used to study the effect of redox agents, pH and exogenous ligands on the heme environment.

Dispersal of seeds of Hymenaea courbaril (Fabaceae) in a logged rain forest in the Peruvian Amazonian

Seed dispersal of Hymenaea courbaril was studied by following the fate of 585 seeds embedded with small magnets and set in displays in and near a logged strip in rain forest in the Peruvian Amazonian. Mammals took fruits from all displays, which were located in the forest, edge, and cleared strip. Overall removal rates were low - a median of 8.1 fruits / month from displays maintained with 8-10 fruits - but were higher in August than in earlier months. Most fruits were dropped near the display or had their seeds eaten, but > 13% were successfully dispersed. Most of the dispersed seeds were buried, which increases probability of germination. Maximum dispersal distance of live seeds was 12.1 m (median 3.1 m), but other magnets were transported up to 34 m, indicating seeds were dispersed further, but then eaten. Acouchies (most likely Myoprocta pratti) and agoutis (Dasyprocta fuliginosa) were apparently the main dispersal agents. Dispersal of seeds from the forest into the logged strip was rare, suggesting that although rodents disperse H. courbaril, they cannot be relied on for the reseeding this and similar species in recent clearings.

Search for pair-produced long-lived neutral particles decaying in the ATLAS hadronic calorimeter in pp collisions at s√ = 8 TeV

The ATLAS detector at the Large Hadron Collider at CERN is used to search for the decay of a scalar boson to a pair of long-lived particles, neutral under the Standard Model gauge group, in 20.3 fb−1 of data collected in proton--proton collisions at s√ = 8 TeV. This search is sensitive to long-lived particles that decay to Standard Model particles producing jets at the outer edge of the ATLAS electromagnetic calorimeter or inside the hadronic calorimeter. No significant excess of events is observed. Limits are reported on the product of the scalar boson production cross section times branching ratio into long-lived neutral particles as a function of the proper lifetime of the particles. Limits are reported for boson masses from 100 GeV to 900 GeV, and a long-lived neutral particle mass from 10 GeV to 150 GeV.

Forest structure of artificial islands in the Tucuruí dam reservoir in northern Brazil: a test core-area model

Construction of hydroelectric dams in tropical regions has been contributing significantly to forest fragmentation. Alterations at edges of forest fragments impact plant communities that suffer increases in tree damage and dead, and decreases in seedling recruitment. This study aimed to test the core-area model in a fragmented landscape caused by construction of a hydroelectric power plant in the Brazilian Amazon. We studied variations in forest structure between the margin and interiors of 17 islands of 8-100 hectares in the Tucuruí dam reservoir, in two plots (30 and >100m from the margin) per island. Mean tree density, basal area, seedling density and forest cover did not significantly differ between marginal and interior island plots. Also, no significant differences were found in liana density, dead tree or damage for margin and interior plots. The peculiar topographic conditions associated with the matrix habitat and shapes of the island seem to extend edge effects to the islands' centers independently of the island size, giving the interior similar physical microclimatic conditions as at the edges. We propose a protocol for assessing the ecological impacts of edge effects in fragments of natural habitat surrounded by induced (artificial) edges. The protocol involves three steps: (1) identification of focal taxa of particular conservation or management interest, (2) measurement of an "edge function" that describes the response of these taxa to induced edges, and (3) use of a "Core-Area Model" to extrapolate edge function parameters to existing or novel situations.

Multi-temporal analysis of radiometric changes in satellite images of forest edges to infer selective-logging areas in the Amazon forest

Radiometric changes observed in multi-temporal optical satellite images have an important role in efforts to characterize selective-logging areas. The aim of this study was to analyze the multi-temporal behavior of spectral-mixture responses in satellite images in simulated selective-logging areas in the Amazon forest, considering red/near-infrared spectral relationships. Forest edges were used to infer the selective-logging infrastructure using differently oriented edges in the transition between forest and deforested areas in satellite images. TM/Landsat-5 images acquired at three dates with different solar-illumination geometries were used in this analysis. The method assumed that the radiometric responses between forest with selective-logging effects and forest edges in contact with recent clear-cuts are related. The spatial frequency attributes of red/near infrared bands for edge areas were analyzed. Analysis of dispersion diagrams showed two groups of pixels that represent selective-logging areas. The attributes for size and radiometric distance representing these two groups were related to solar-elevation angle. The results suggest that detection of timber exploitation areas is limited because of the complexity of the selective-logging radiometric response. Thus, the accuracy of detecting selective logging can be influenced by the solar-elevation angle at the time of image acquisition. We conclude that images with lower solar-elevation angles are less reliable for delineation of selecting logging.

Literatura russa em Portugal: das vias de difusão aos sentidos de receção: o caso de Leão Tolstói

Tese de Doutoramento em Ciências da Literatura (área de especialização em Literatura Comparada).

Current Challenges in Modeling Cellular Metabolism

Mathematical and computational models play an essential role in understanding the cellular metabolism. They are used as platforms to integrate current knowledge on a biological system and to systematically test and predict the effect of manipulations to such systems. The recent advances in genome sequencing techniques have facilitated the reconstruction of genome-scale metabolic networks for a wide variety of organisms from microbes to human cells. These models have been successfully used in multiple biotechnological applications. Despite these advancements, modeling cellular metabolism still presents many challenges. The aim of this Research Topic is not only to expose and consolidate the state-of-the-art in metabolic modeling approaches, but also to push this frontier beyond the current edge through the introduction of innovative solutions. The articles presented in this e-book address some of the main challenges in the field, including the integration of different modeling formalisms, the integration of heterogeneous data sources into metabolic models, explicit representation of other biological processes during phenotype simulation, and standardization efforts in the representation of metabolic models and simulation results.

A 3D computer assisted Orthopedic Surgery Planning approach based on planar radiography

Dissertação de mestrado integrado em Engenharia Biomédica (área de especialização em Informática Médica)

Motivating techniques within Irish and American manufacturing and service companies in the Northwest of Ireland

In today’s world, many companies are concentrating on both their technology and human resources to provide them with their competitive advantage. Hence, understanding what motivates people is particularly important for managers in order to develop and sustain a competitive edge. As a result, numerous theories have been advanced to help our understanding of the subject matter and from these theories many motivational methods have evolved to enhance motivation within the workplace. In addition, research has been conducted on the various types of motivational techniques utilised by companies within Ireland. However, very little research has been completed within specific geographical regions in Ireland concerning the types of motivational techniques implemented at different job levels and their impact on employees work performance. Thus the objective of this research was to identify the motivational techniques utilised at different job levels within large manufacturing and service companies in the Northwest of Ireland and examine how these techniques influence the performance levels of employees. Furthermore, the study examined if these companies have changed from traditional ways of motivating employees to newer techniques. The research methodologies used to undertake the research included interviews with the HR managers and questionnaires completed by different employees at various job levels within the participating companies. Overall the conclusions were varied. Many different types of motivation techniques were found within the study’s participating companies. Irish companies are improving their motivational techniques, however most of these techniques are only used within higher job levels. In contrast to their American counterparts, a variety of motivational techniques are utilised and implemented at all job levels. On a more positive note, the majority of these motivational techniques do increase performance levels at all job levels. From the extensive primary and secondary research conducted, the thesis concludes by offering a number of recommendations to assist companies in further development of their motivational techniques for all job levels. These recommendations hope to augment the success of companies through an enhanced motivated workforce.

The spatial analysis and speciation of uranium and thorium series radionuclides in the soil of the Cronamuck Valley, County Donegal, Ireland

This thesis details the findings of a study into the spatial distribution and speciation of 238U, 226Ra and 228Ra in the soils of the Cronamuck valley, County Donegal . The region lies on the north-eastern edge of the Barnesmore granite and has been the subject of uranium prospecting efforts in the past. The results of the project provide information on the practicability of geostatistical techniques as a means of estimating the spatial distribution of natural radionuclides and provide insight into the behaviour of these nuclides and their modes of occurrence and enrichment in an upland bog environment. The results of the geostatistical survey conducted on the area indicate that the primary control over the levels of the studied nuclides in the soil of the valley is the underlying geology. Isopleth maps of nuclide levels in the valley indicate a predominance of elevated nuclide levels in the samples drawn from the granite region, statistical analysis of the data indicating that levels of the nuclides in samples drawn from the granite are greater than levels drawn from the non-granite region by up to a factor of 4.6 for 238U and 4.9 for 226Ra. Redistribution of the nuclides occurs via drainage systems within the valley, this process being responsible for transport of nuclides away from the granite region resulting in enrichment of nuclides in soils not underlain by the granite. Distribution of the nuclides within the valley is erratic, the effect of drainage f lows on the nuclides resulting in localized enriched areas within the valley. Speciation of the nuclides within one of the enriched areas encountered in the study indicates that enrichment is as a result of saturation of the soil with drainage water containing trace amounts of radionuclides. 238U is primarily held within the labile fractions (exchangeable cat ions + easily oxidisable organics + amorphous iron oxides ) of the soil , 226Ra being associated with the non- labile fractions, most probably the resistant organic material. 228Ra displays a significant occurrence in both the labile and non- labile fractions. The ability of the soil to retain uranium appears to be affected largely by the redox status of the soil, samples drawn from oxidizing environments tending to have little or no uranium in the easily oxidisable and amorphous iron oxide fractions. This loss of uranium from oxidised soil samples is responsible for the elevated 226Ra /238U disequilibrium encountered in the enriched areas of the valley. Analysis of the data indicates that samples displaying elevated 226Ra/238U ratios also exhibit elevated 228Ra/238U ratios indicating a loss of uranium from the samples as opposed to an enrichment of 226Ra.

Quality management for education (second level schools)

Quality Management is a well-developed and widely used approach within industry to gain competitive edge and increased market share. It is a new management approach for schools who are now applying it without having the culture or experience of its evolution. Industrially based Quality management systems and excellence models have been developed. These excellence models and frameworks are based on the principles and concepts of TQM which are recognised as essential elements of high performing organisations. Schools are complex social institutions that provide a service. Like any other service industry, the customers of education are expecting and demanding a better service or else they will go elsewhere. Schools are beginning to reform and change to adapt to such demands. This has been reflected in Ireland in the Education Act, 1998. It is now the right time to develop a quality management system specifically for schools. The existing industrial excellence models have been modified for use in the private and public sector and some have been specifically tailored for education. The problem with such models is that they are still too sophisticated and the language still too industrial for schools. This Thesis develops and Excellence Model for Second Level Schools and provides guidance and school specific tools for its implementation.

Development of a semi-automatic self learning pattern recognition system for the control of electronic boards

This project was funded under the Applied Research Grants Scheme administered by Enterprise Ireland. The project was a partnership between Galway - Mayo Institute of Technology and an industrial company, Tyco/Mallinckrodt Galway. The project aimed to develop a semi - automatic, self - learning pattern recognition system capable of detecting defects on the printed circuits boards such as component vacancy, component misalignment, component orientation, component error, and component weld. The research was conducted in three directions: image acquisition, image filtering/recognition and software development. Image acquisition studied the process of forming and digitizing images and some fundamental aspects regarding the human visual perception. The importance of choosing the right camera and illumination system for a certain type of problem has been highlighted. Probably the most important step towards image recognition is image filtering, The filters are used to correct and enhance images in order to prepare them for recognition. Convolution, histogram equalisation, filters based on Boolean mathematics, noise reduction, edge detection, geometrical filters, cross-correlation filters and image compression are some examples of the filters that have been studied and successfully implemented in the software application. The software application developed during the research is customized in order to meet the requirements of the industrial partner. The application is able to analyze pictures, perform the filtering, build libraries, process images and generate log files. It incorporates most of the filters studied and together with the illumination system and the camera it provides a fully integrated framework able to analyze defects on printed circuit boards.