Novel production method of porous surface Ti samples for biomedical application

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Porous titanium for biomedical applications: An experimental study on rabbits

Objective: The aim of this study was to carry out an in vivo assessment of bone ingrowth in two different types of porous titanium -the first being completely porous, and the second with a porous surface and dense nucleus, manufactured by powder metallurgy- and to evaluate their mechanical properties. Study design: Ten scaffolds from each group were submitted to metallographic analysis and compression tests. Next, two scaffolds of each type were inserted into 14 rabbits, which were sacrificed 8 weeks after surgery. The samples were submitted for histological examination. Results: Metallographic analysis revealed interconnected pores, and the average interconnected pore diameter was about 360 mm, with 36% total porosity. The totally porous titanium samples and the titanium samples with porous surface and dense nucleus showed an average compressive strength of 16.19 MPa and 69.27 MPa, respectively. After 8 weeks, the animals showed bone ingrowth, even into the most internal pores. Conclusions: The pore morphology was effective in permitting bone ingrowth in both groups. Titanium scaffolds with a porous surface and dense nucleus showed the best mechanical properties and most adequate interface.

Search for B-s(0)->mu(+)mu(-) decays at D0

We report results from a search for the decay B-s(0)->mu(+)mu(-) using 1.3 fb(-1) of p (p) over bar collisions at root s = 1.96 TeV collected by the D0 experiment at the Fermilab Tevatron Collider. We find two candidate events, consistent with the expected background of 1.24 +/- 0.99, and set an upper limit on the branching fraction of B(B-s(0)->mu(+)mu(-))< 1.2x10(-7) at the 95% C.L.

Measurement of the p(p)over-bar -> WZ+X cross section at root s=1.96 TeV and limits on WWZ trilinear gauge couplings

We present measurements of the process p (P) over bar -> WZ + X -> l 'nu(l ')l (l) over bar at root s = 1:96 TeV,where l and l ' are electrons or muons. Using 1 fb(-1) of data from the D0 experiment, we observe 13 candidates with an expected background of 4.5 +/- 0.6 events and measure a cross section sigma(WZ) = 2.7(-1.3)(+1.7) pb. From the number of observed events and the Z boson transverse momentum distribution, we limit the trilinear WWZ gauge couplings to -0: 17 <= lambda(Z) <= 0.21 (Delta k(Z) <= 0.29(lambda(Z) = 0) at the 95% C.L. for a form factor scale Lambda = 2 TeV. Further, assuming that Delta g(1)(Z) = Delta k(Z), we find -0.12 <= Delta k(Z) <= 0.29(lambda(Z) = 0) at the 95% C. L. These are the most restrictive limits on the WWZ couplings available to date.

Measurement of inclusive differential cross sections for Upsilon(1S) production in p(p)over-bar collisions at root s=1.96 TeV

We present measurements of the inclusive production cross sections of the Upsilon(1S) bottomonium state in p (p) over bar collisions at root s=1.96 TeV. Using the Upsilon(1S)->mu(+)mu(-) decay mode for a data sample of 159 +/- 10 pb(-1) collected by the D0 detector at the Fermilab Tevatron collider, we determine the differential cross sections as a function of the Upsilon(1S) transverse momentum for three ranges of the Upsilon(1S) rapidity: 0 <\y(Upsilon)\<= 0.6, 0.6 <\y(Upsilon)\<= 1.2, and 1.2 <\y(Upsilon)\<= 1.8.

Measurement of the ratio of B+ and B-0 meson lifetimes

The ratio of the B+ and B-0 meson lifetimes was measured using data collected in 2002-2004 by the D0 experiment in Run II of the Fermilab Tevatron Collider. These mesons were reconstructed in B&RARR;μ(+)ν D*-X decays, which are dominated by B-0 and B&RARR;μ(+)ν(D) over bar X-0 decays, which are dominated by B+. The ratio of lifetimes is measured to be τ(+)/τ(0)=1.080&PLUSMN; 0.016(stat)&PLUSMN; 0.014(syst).

Search for right-handed W bosons in top quark decay

We present a measurement of the fraction f(+) of right-handed W bosons produced in top quark decays, based on a candidate sample of t (t) over bar events in the lepton+jets decay mode. These data correspond to an integrated luminosity of 230 pb(-1), collected by the D0 detector at the Fermilab Tevatron p (p) over bar Collider at root s=1.96 TeV. We use a constrained fit to reconstruct the kinematics of the t (t) over bar and decay products, which allows for the measurement of the leptonic decay angle theta(*) for each event. By comparing the cos theta(*) distribution from the data with those for the expected background and signal for various values of f(+), we find f(+)=0.00 +/- 0.13(stat)+/- 0.07(syst). This measurement is consistent with the standard model prediction of f(+)=3.6 x 10(-4).

Search for resonant second generation slepton production at the Fermilab Tevatron

We present a search for supersymmetry in the R-parity violating resonant production and decay of smuons and muon sneutrinos in the channels mu ->chi(0)(1)mu, mu ->chi(0)(2,3,4)mu, and nu(mu)->chi(+/-)(1,2)mu. We analyzed 0.38 fb(-1) of integrated luminosity collected between April 2002 and August 2004 with the D0 detector at the Fermilab Tevatron Collider. The observed number of events is in agreement with the standard model expectation, and we calculate 95% C.L. limits on the slepton production cross section times branching fraction to gaugino plus muon, as a function of slepton and gaugino masses. In the framework of minimal supergravity, we set limits on the coupling parameter lambda(')(211), extending significantly previous results obtained in Run I of the Tevatron and at the CERN LEP collider.

Properties of l=1 B-1 and B*(2) Mesons

This Letter presents the first strong evidence for the resolution of the excited B mesons B-1 and B-2(*) as two separate states in fully reconstructed decays to B+(*())pi(-). The mass of B-1 is measured to be 5720.6 +/- 2.4 +/- 1.4 MeV/c(2) and the mass difference Delta M between B-2* and B-1 is 26.2 +/- 3.1 +/- 0: 9 MeV/c(2), giving the mass of the B-2* as 5746.8 +/- 2.4 +/- 1.7 MeV/c(2). The production rate for B-1 and B-2* mesons is determined to be a fraction (13.9 +/- 1.9 +/- 3.2)% of the production rate of the B+ meson.

Search for production of single top quarks via tcg and tug flavor-changing-neutral-current couplings

We search for the production of single top quarks via flavor-changing-neutral-current couplings of a gluon to the top quark and a charm (c) or up (u) quark. We analyze 230 pb(-1) of lepton+jets data from p (p) over tilde collisions at a center of mass energy of 1.96 TeV collected by the D0 detector at the Fermilab Tevatron Collider. We observe no significant deviation from standard model predictions, and hence set upper limits on the anomalous coupling parameters kappa(c)(g)/Lambda and kappa(u)(g)/Lambda, where kappa(g) define the strength of tcg and tug couplings, and Lambda defines the scale of new physics. The limits at 95% C.L. are kappa(c)(g)/Lambda < 0.15 TeV-1 and kappa(u)(g)/Lambda < 0.037 TeV-1.

Measurement of the t(t)over-bar production cross section in p(p)over-bar collisions at root s=1.96 TeV using kinematic characteristics of lepton plus jets events

We present a measurement of the top quark pair production cross section in p (p) over bar collisions at root s=1.96 TeV utilizing 425 pb(-1) of data collected with the D0 detector at the Fermilab Tevatron Collider. We consider the final state of the top quark pair containing one high-p(T) electron or muon and at least four jets. We exploit specific kinematic features of t (t) over bar events to extract the cross section. For a top quark mass of 175 GeV, we measure sigma(t (t) over bar)=6.4(-1.2)(+1.3)(stat)+/- 0.7(syst)+/- 0.4(lum) pb, in good agreement with the standard model prediction.

Search for the flavour-changing neutral current B-s(0)->mu+mu- in p(p)over-bar collisions at root s=1.96 TeV with the D0 dectector

We present the results of a search for the flavor-changing neutral current decay B-s(0)-->mu(+)mu(-) using a data set with integrated luminosity of 240 pb(-1) of p (p) over bar collisions at roots=1.96 TeV collected with the D0 detector in run II of the Fermilab Tevatron collider. We find the upper limit on the branching fraction to be B(B-s(0)-->mu(+)mu(-))less than or equal to5.0x10(-7) at the 95% C.L. assuming no contributions from the decay B-d(0)-->mu(+)mu(-) in the signal region. This limit is the most stringent upper bound on the branching fraction B-s(0)-->mu(+)mu(-) to date.

Search for first-generation scalar leptoquarks in p(p)over-bar collisions at root s=1.96 TeV

We report on a search for pair production of first-generation scalar leptoquarks (LQ) in p (p) over bar collisions at root s=1.96 TeV using an integrated luminosity of 252 pb(-1) collected at the Fermilab Tevatron collider by the D0 detector. We observe no evidence for LQ production in the topologies arising from LQ(LQ) over bar -> eqeq and LQ(LQ) over bar -> eq nu q, and derive 95% C.L. lower limits on the LQ mass as a function of beta, where beta is the branching fraction for LQ -> eq. The limits are 241 and 218 GeV/c(2) for beta=1 and 0.5, respectively. These results are combined with those obtained by D0 at root s=1.8 TeV, which increases these LQ mass limits to 256 and 234 GeV/c(2).

Measurement of the t(t)over-bar production cross section in p(p)over-bar collisions at root s=1.96 TeV using lepton plus jets events with lifetime b-tagging

We present a measurement of the top quark pair (t (t) over bar) production cross section (sigma(t (t) over bar)) in pp collisions at root s = 1.96 TeV using 230 pb(-1) of data collected by the DO experiment at the Fermilab Tevatron Collider. We select events with one charged lepton (electron or muon), missing transverse energy, and jets in the final state. We employ lifetime-based b-jet identification techniques to further enhance the t F purity of the selected sample. For a top quark mass of 175 GeV, we measure sigma(t (t) over bar) 8.6(-1.5)(+1.6) (stat. + syst.) +/- 0.6(lumi.) pb, in agreement with the standard model expectation. (c) 2005 Published by Elsevier B.V.

Measurement of the t(t)over-bar production cross section in p(p)over-bar collisions at root s=1.96 TeV using kinematic characteristics of lepton plus jets events

We present a measurement of the top quark pair (t (t) over bar) production cross section (sigma(t (t) over bar)) in pp collisions at a center-of-mass energy of 1.96 TeV using 230 pb(-1) of data collected by the DO detector at the Fermilab Tevatron Collider. We select events with one charged lepton (electron or muon), large missing transverse energy, and at least four jets, and extract the t (t) over bar content of the sample based on the kinematic characteristics of the events. For a top quark mass of 175 GeV, we measure sigma(t (t) over bar) 6.7(-1.3)(+1.4)(stat)(-1.1)(+1.6)(syst) +/- 0.4(lumi) pb, in good agreement with the standard model prediction. (c) 2005 Elsevier B.V. All rights reserved.