Automatic image scaling for place recognition in changing environments

Robustness to variations in environmental conditions and camera viewpoint is essential for long-term place recognition, navigation and SLAM. Existing systems typically solve either of these problems, but invariance to both remains a challenge. This paper presents a training-free approach to lateral viewpoint- and condition-invariant, vision-based place recognition. Our successive frame patch-tracking technique infers average scene depth along traverses and automatically rescales views of the same place at different depths to increase their similarity. We combine our system with the condition-invariant SMART algorithm and demonstrate place recognition between day and night, across entire 4-lane-plus-median-strip roads, where current algorithms fail.

Airborne culturable fungi in naturally ventilated primary school environments in a subtropical climate

There is currently a lack of reference values for indoor air fungal concentrations to allow for the interpretation of measurement results in subtropical school settings. Analysis of the results of this work established that, in the majority of properly maintained subtropical school buildings, without any major affecting events such as floods or visible mould or moisture contamination, indoor culturable fungi levels were driven by outdoor concentration. The results also allowed us to benchmark the “baseline range” concentrations for total culturable fungi, Penicillium spp., Cladosporium spp. and Aspergillus spp. in such school settings. The measured concentration of total culturable fungi and three individual fungal genera were estimated using Bayesian hierarchical modelling. Pooling of these estimates provided a predictive distribution for concentrations at an unobserved school. The results indicated that “baseline” indoor concentration levels for indoor total fungi, Penicillium spp., Cladosporium spp. and Aspergillus spp. in such school settings were generally ≤ 1450, ≤ 680, ≤ 480 and ≤ 90 cfu/m3, respectively, and elevated levels would indicate mould damage in building structures. The indoor/outdoor ratio for most classrooms had 95% credible intervals containing 1, indicating that fungi concentrations are generally the same indoors and outdoors at each school. Bayesian fixed effects regression modeling showed that increasing both temperature and humidity resulted in higher levels of fungi concentration.

Additive tissue manufacturing for breast reconstruction: Combining CAD/CAM with adipose tissue engineering

The primary aim of this multidisciplinary project was to develop a new generation of breast implants. Disrupting the currently prevailing paradigm of silicone implants which permanently introduce a foreign body into mastectomy patients, highly porous implants developed as part of this PhD project are biodegradable by the body and augment the growth of natural tissue. Our technology platform leverages computer-assisted-design which allows us to manufacture fully patient-specific implants based on a personalised medicine approach. Multiple animal studies conducted in this project have shown that the polymeric implant slowly degrades within the body harmlessly while the body's own tissue forms concurrently.

Designing environments for recovery

There’s growing evidence that psychosis is linked to the physical environments that we live in. Good environments are the ones that allow people to step back, relax and feel secure, while engaging in interesting and meaningful activity. Bad environments don’t allow respite: they keep people on their toes and somehow magnify meaninglessness and hollow rules and unreasonable demands. They may also be bleak and even unfair or outright scary. But don’t expect everyone to notice the bad environments: recent studies demonstrate that patients with psychosis are far more likely to notice even subtle negative features in the environment than people without symptoms. The same patients are also less likely to notice the good things an environment has to offer – but that doesn’t mean they shouldn’t be provided.

Tissue engineering of a morphologically and functionally intact humanized bone organ for bone metastasis research

The aim of this thesis was to establish an individualized, patient-specific diagnostic and therapeutic preclinical disease model for bone metastasis research. Tissue engineering of humanized bone within mice allowed the development of a humanized immune system in the host animal. This novel platform makes it possible to analyze the growth of human cancer cells in human bone in the presence of human immune cells.

The influence of technology-mediated environments on international business experience for internationalisation: Does international experience matter?

This paper examines the role and importance of international business experience for firms operating in technologically-mediated environments. Although the key success factors of international expansion have been subject to extensive research in the international business literature, the analysis of technology-mediated environments on international business experience remains limited. This finding is unexpected given that the Internet and the technologies that have enabled it have profoundly transformed the ways in which international business is conducted. This is especially so for firms in the Australian region where the Internet has allowed business to access the scale of markets they need to grow and operate globally (Google and PWC, 2015). Given that businesses of the future will need to innovate quicker and more effectively in online settings to remain competitive, it seems appropriate that we re-visit the more traditional facets of internationalisation; such as the necessity of international business experience for firm performance. In doing so, the empirical section of this paper focuses on twelve Australian international entrepreneurial firms, who in varying degrees utilise technology to leverage their internationalisation activities. The findings suggest that international entrepreneurs with lower levels of international business experience still achieve international performance outcomes. The findings indicate that firms are recognising that the ability to adapt and evolve quickly in technologically-advanced settings is imperative. The findings also suggest that international entrepreneurs are relying less on traditional facets of international business experience, and are learning in self-taught or autodidactic ways. This is because businesses in the current global climate are now operating in complex and highly dynamic environments, characterised by rapid change; thus, the findings suggest that international business experience is becoming less important due to the evolving nature of international business environments.

Peptide-functionalized polymeric nanoparticles for active targeting of damaged tissue in animals with experimental autoimmune encephalomyelitis

Increased permeability of blood vessels is an indicator for various injuries and diseases, including multiple sclerosis (MS), of the central nervous system. Nanoparticles have the potential to deliver drugs locally to sites of tissue damage, reducing the drug administered and limiting associated side effects, but efficient accumulation still remains a challenge. We developed peptide-functionalized polymeric nanoparticles to target blood clots and the extracellular matrix molecule nidogen, which are associated with areas of tissue damage. Using the induction of experimental autoimmune encephalomyelitis in rats to provide a model of MS associated with tissue damage and blood vessel lesions, all targeted nanoparticles were delivered systemically. In vivo data demonstrates enhanced accumulation of peptide functionalized nanoparticles at the injury site compared to scrambled and naive controls, particularly for nanoparticles functionalized to target fibrin clots. This suggests that further investigations with drug laden, peptide functionalized nanoparticles might be of particular interest in the development of treatment strategies for MS.

Adolescent self-reported physical activity and autonomy: A case for constrained and structured environments?

The provision of autonomy supportive environments that promote physical activity engagement have become popular in contemporary youth settings. However, questions remain about whether adolescent perceptions of their autonomy have implications for physical activity. The purpose of this investigation was to examine the association between adolescents’ self-reported physical activity and their perceived autonomy. Participants (n = 384 adolescents) aged between 12 and 15 years were recruited from six secondary schools in metropolitan Brisbane, Australia. Self-reported measures of physical activity and autonomy were obtained. Logistic regression with inverse probability weights were used to examine the association between autonomy and the odds of meeting youth physical activity guidelines. Autonomy (OR 0.61, 95% CI 0.49-0.76) and gender (OR 0.62, 95% CI 0.46-0.83) were negatively associated with meeting physical activity guidelines. However, the model explained only a small amount of the variation in whether youth in this sample met physical activity guidelines (R2 = 0.023). For every 1 unit decrease in autonomy (on an index from 1 to 5), participants were 1.64 times more likely to meet physical activity guidelines. The findings, which are at odds with several previous studies, suggest that interventions designed to facilitate youth physical activity should limit opportunities for youth to make independent decisions about their engagement. However, the small amount of variation explained by the predictors in the model is a caveat, and should be considered prior to applying such suggestions in practical settings. Future research should continue to examine a larger age range, longitudinal observational or intervention studies to examine assertions of causality, as well as objective measurement of physical activity.

The microwell-mesh: A novel device and protocol for the high throughput manufacturing of cartilage microtissues

Microwell platforms are frequently described for the efficient and uniform manufacture of 3-dimensional (3D) multicellular microtissues. Multiple partial or complete medium exchanges can displace microtissues from discrete microwells, and this can result in either the loss of microtissues from culture, or microtissue amalgamation when displaced microtissues fall into common microwells. Herein we describe the first microwell platform that incorporates a mesh to retain microtissues within discrete microwells; the microwell-mesh. We show that bonding a nylon mesh with an appropriate pore size over the microwell openings allows single cells to pass through the mesh into the microwells during the seeding process, but subsequently retains assembled microtissues within discrete microwells. To demonstrate the utility of this platform, we used the microwell-mesh to manufacture hundreds of cartilage microtissues, each formed from 5 × 10(3) bone marrow-derived mesenchymal stem/stromal cells (MSC). The microwell-mesh enabled reliable microtissue retention over 21-day cultures that included multiple full medium exchanges. Cartilage-like matrix formation was more rapid and homogeneous in microtissues than in conventional large diameter control cartilage pellets formed from 2 × 10(5) MSC each. The microwell-mesh platform offers an elegant mechanism to retain microtissues in microwells, and we believe that this improvement will make this platform useful in 3D culture protocols that require multiple medium exchanges, such as those that mimic specific developmental processes or complex sequential drug exposures.

IdeaWall: Mixed mode distributed collaboration in enterprise environments

In early stages of design and modeling, computers and computer applications are often considered an obstacle, rather than a facilitator of the process. Most notably, brainstorms, process modeling with business experts, or development planning, are often performed by a team in front of a whiteboard. While "whiteboarding" is recognized as an effective tool, low-tech solutions that allow remote participants to contribute are still not generally available. This is a striking observation, considering that vast majority of teams in large organizations are distributed teams. And this has also been one of the key triggers behind the project described in this article, where a team of corporate researchers decided to identify state of the art technologies that could facilitate the scenario mentioned above. This paper is an account of a research project in the area of enterprise collaboration, with a strong focus on the aspects of human computer interaction in mixed mode environments, especially in areas of collaboration where computers still play a secondary role. It is describing a currently running corporate research project. © 2012 Springer-Verlag.

Learned ultra-wideband RADAR sensor model for augmented LIDAR-based traversability mapping in vegetated environments

In vegetated environments, reliable obstacle detection remains a challenge for state-of-the-art methods, which are usually based on geometrical representations of the environment built from LIDAR and/or visual data. In many cases, in practice field robots could safely traverse through vegetation, thereby avoiding costly detours. However, it is often mistakenly interpreted as an obstacle. Classifying vegetation is insufficient since there might be an obstacle hidden behind or within it. Some Ultra-wide band (UWB) radars can penetrate through vegetation to help distinguish actual obstacles from obstacle-free vegetation. However, these sensors provide noisy and low-accuracy data. Therefore, in this work we address the problem of reliable traversability estimation in vegetation by augmenting LIDAR-based traversability mapping with UWB radar data. A sensor model is learned from experimental data using a support vector machine to convert the radar data into occupancy probabilities. These are then fused with LIDAR-based traversability data. The resulting augmented traversability maps capture the fine resolution of LIDAR-based maps but clear safely traversable foliage from being interpreted as obstacle. We validate the approach experimentally using sensors mounted on two different mobile robots, navigating in two different environments.

Creative work environments and employee engagement: Exploring potential links and possibilities

Companies that perform well are often identified as either possessing creative work environments and (or) having high levels of employee engagement. Creative work environments are largely not well defined, although research alludes to contributing factors. On the other hand employee engagement is defined as the multiple emotional, rational and behavioural dimensions of an employee's consistent level of effort, commitment and connection to their job. Some authors including Saks (2006) and Shuck and Wollard (2010) call for more scholarly research to increase our understanding of the drivers of employee engagement and the actions that organisations can take to improve engagement. There are references made in the literature to the existence of a relationship between a creative work environment and engaged employees (Isaksen & Ekvall 2010), but there is a lack of empirical evidence providing support for the direct relationship between the two. This study aims to explore the relationship, addressing the question of how a creative work environment impacts on employee engagement. Exploratory research to investigate this relationship will use a qualitative methodology with semi-structured interviews, field observations and document analysis. Key themes will be analysed at both the individual and team level reflecting the multi-level nature of the constructs.

The role of offsets in compensating for damage in the coastal and marine environments

This thesis examines the extent of which economic instruments can be used to minimise environmental damage in the coastal and marine environments, and the role of offsets to compensate for residual damage. Economic principles are used to review current command and control systems, potential incentive based mechanisms, and the development of appropriate offsets. Implementing offsets in the marine environment has a number of challenges, so alternative approaches may be necessary. The study finds that offsets in areas remote from the initial impact, or even to protect different species, may be acceptable provided they result in greater conservation benefits than the standard like-for-like offset. This study is particularly relevant for the design of offsets in the coastal and marine environments where there is limited scope for like-for-like offsets.

Use of 3D printed materials as tissue-equivalent phantoms

This study used the specific example of 3D printing with acrylonitrile butadiene styrene (ABS) as a means to investigate the potential usefulness of benchtop rapid prototyping as a technique for producing patient specific phantoms for radiotherapy dosimetry. Three small cylinders and one model of a human lung were produced via in-house 3D printing with ABS, using 90%, 50%, 30% and 10% ABS infill densities. These phantom samples were evaluated in terms of their geometric accuracy, tissue equivalence and radiation hardness, when irradiated using a range of clinical radiotherapy beams. The measured dimensions of the small cylindrical phantoms all matched their planned dimensions, within 1mm. The lung phantom was less accurately matched to the lung geometry on which it was based, due to simplifications introduced during the phantom design process. The mass densities, electron densities and linear attenuation coefficients identified using CT data, as well as the results of film measurements made using megavoltage photon and electron beams, indicated that phantoms printed with ABS, using infill densities of 30% or more, are potentially useful as lung- and tissue-equivalent phantoms for patient-specific radiotherapy dosimetry. All cylindrical 3D printed phantom samples were found to be unaffected by prolonged radiation and to accurately match their design specifications. However, care should be taken to avoid oversimplifying anatomical structures when printing more complex phantoms.

Conserved gene structure and function of interleukin-10 in teleost fish

Interleukin-10 (IL-10) is an important immunoregulatory cytokine produced by various types of cells. Researchers describe here the isolation and characterization of olive flounder IL-10 (ofIL-10) cDNA and genomic organization. The ofIL-10 gene encodes a 187 amino acid protein and is composed of a five exon/four intron structure, similar to other known IL-10 genes. The ofIL-10 promoter sequence analysis shows a high level of homology in putative binding sites for transcription factors which are sufficient for transcriptional regulation ofIL-10. Important structural residues are maintained in the ofIL-10 protein including the four cysteines responsible for the two intra-chain disulfide bridges reported for human IL-10 and two extra cysteine residues that exist only in fish species. The phylogenetic analysis clustered ofIL-10 with other fish IL-10s and apart from mammalian IL-10 molecules. Quantitative real-time Polymerase Chain Reaction (PCR) analysis demonstrated ubiquitous ofIL-10 gene expression in the 13 tissues examined. Additionally, the induction of ofIL-10 gene expression was observed in the kidney tissue from olive flounder infected with bacteria (Edawardsiella tarda) or virus (Viral Hemorrhagic Septicemia Virus; VHSV). These data indicate that IL-10 is an important immune regulator that is conserved strictly genomic organization and function during the evolution of vertebrate immunity.