Maturation of a transient outward potassium current in mouse fetal hypothalamic neurons in culture

The whole-cell voltage clamp technique was used to record potassium currents in mouse fetal hypothalamic neurons developing in culture medium from days 1 to 17. The neurons were derived from fetuses of IOPS/OF1 mice on the 14th day of gestation. The mature neurons (>six days in culture) showed both a transient potassium current and a non-inactivating delayed rectifier potassium current. These were identified pharmacologically by using the potassium channel blockers tetraethyl ammonium chloride and 4-aminopyridine, and on the basis of their kinetics and voltage sensitivities. The delayed rectifier potassium current had a threshold of −20 mV, a slow time-course of activation, and was sustained during the voltage pulse. The 4-aminopyridine-sensitive current was transient, and was activated from a holding potential more negative (−80 mV) than that required for evoking the delayed rectifier potassium current (−40 mV). The delayed rectifier potassium current was detectable from day 1 onwards, while the transient potassium current showed a distinct developmental trend. The time-constant of inactivation became faster with age in culture. The half steady-state inactivation potential showed a shift towards less negative membrane potentials with age, and the relationship was best described by a logarithmic regression equation.The developmental trend of the transient potassium current may relate functionally to the progressive morphological changes, and the appearance of synaptic connections during ontogenesis.

MPD arcjet cathode surface current density

The radial current density distribution on the cathode longitudinal surface of magnetoplasmadynamic arcjets for axisymmetric geometries has been obtained by simultaneous solution of the electromagnetic equations for a given uniform gas dynamic field. The problem formulation permits a parametric study of the effects of the Hall parameter and the magnetic Reynolds number. The solution for the current density distribution displays current concentrations at two locations, that is, at the upstream and downstream ends of the cathode. This result is in conformity with known experimental data. The parameters responsible for these current concentrations are identified. It is shown that the effect of the magnetic Reynolds number on the current density distribution is different depending on whether or not the Hall effect is included. This result is also found to be consistent with experimental data.

Principle of a Dual Current Source Converter for AC Motor Drives

The principle of operation of a dual current source converter is briefly explained. The combination of two single current source converters (SCSC) to form a ``dual (duplex) current source converter'' (DCSC) is proposed. The DCSC is shown to have the following merits: 1) it retains all the advantages of the SCSC; 2) it reduces the harmonic content of the current waveform considerably; and 3) since the load current is shared equally between two current source converters, ratings of the individual components employed in the circuit are considerably lowered. A DCSC can be an attractive choice for sophisticated large horsepower drives where a good performance of the drive rather than cost is a prime factor. An open-loop control scheme employing the DCSC for an ac motor drive has been successfully implemented in the laboratory. Oscillograms of the improved load current waveforms are shown.

Kinetic studies on the interaction of gold(III) with nucleic acids. I. Native DNA-Au(III) system-spectrophotometric studies

Kinetics of the interaction of Au(III) with native calf thymus DNA has been studied spectrophotometrically to determine the kinetic parameters and to examine their dependency on the concentrations of DNA and Au(III), temperature, ionic strength and pH. The reaction is of the first order with respect to both the nucleotide unit of DNA and Au(III) in the stoichiometry of 2∶1 respectively. The rate constants vary with the initial ratio of DNA to Au(III) and is attributed to the effect of free chloride ions and the existence of a number of reaction sites with slight difference in the rate constants. The activation energies of this interaction have been found to be 14–16 kcal/mol. From the effect of ionic strength the reaction is found to occur between a positive and a negative ion in the rate-limiting step. The logarithm of rate constants are the linear function of pH and the slopes are dependent on ther-values. A plausible mechanism has been proposed which involves a primary dissociation of the major existing species (AuCl2(OH)2)−, to give (AuCl2)+ which then reacts with a site in the nucleotide unit of DNA in the rate-liminting step followed by a rapid binding to another site on the complementary strand of the DNA double helix. There exist a number of binding sites with slight difference in reactivity.

Oral health, smoking and adolescence

The present cross-sectional study examined the effect of smoking on oral health in a birth cohort of 15 to 16-year-old Finnish adolescents. The hypothesis was that oral health parameters were poorer among smoking than non-smoking subjects and that a tobacco intervention program could be effective among the adolescents. The study was conducted in the Kotka Health Center, Kotka, Finland. Altogether 501 out of 545 subjects (15- to 16-year-old boys [n = 258] and girls [n = 243]) were clinically examined in 2004 and 2005. The sample frame was a birth cohort of all subjects in 1989 and 1990, living in Kotka. A structured questionnaire was also filled in by the participants to record their general health and health habits, such as smoking, tooth brushing, and medication used. The participants were classified into nonsmokers, current smokers, and former smokers. Subgingival pooled plaque samples were taken and stimulated salivary samples were also collected. The subjects were asked from which of seven professional groups (doctors, school nurses, dental nurses, general nurses, dentists, teachers and media professionals) they would prefer to receive information about tobacco. The two most popular groups they picked up were dentists and school nurses. Current smokers (n=127) were then randomly assigned into three groups: the dentist group (n =44), the school-nurse group (n =42), and the control group (n =39). The intervention was based on a national recommendation of evidence based guidelines by The Finnish Medical Society Duodecim ( 5A counseling system). Two months after the intervention, a second questionnaire was sent to the smokers in the intervention groups. Smoking cessation, smoking quantity per week, and self-rated addiction for smoking (SRA) were recorded. The results were analyzed using the R-statistical program. The results showed that 15% of the subjects had periodontitis. Smokers (25%) had more periodontitis than non-smokers (66%) (p < 0.001). Smoking boys (24%) also had more caries lesions than non-smokers (69%) (p < 0.001), and they brushed their teeth less frequently than non-smokers. Smoking significantly impaired periodontal health of the subjects, even when the confounding effects of plaque and tooth brushing were adjusted. Smoking pack-years, intensified the effects of smoking. Periodontal bacteria Prevotella nigrescens, Prevotella intermedia, Tannerella forsythia and Treponema denticola were more frequently detected among the smokers than non-smokers, especially among smoking girls. Smoking significantly decreased the values of both the salivary periodontal biomarkers MMP-8 (p=0.04) and PMN elastase (p=0.02) in boys. The effect was strengthened by pack years of smoking (MMP-8 p=0.04; elastase p0.01). Of those who participated in the intervention, 19 % quit smoking. The key factors associated with smoking cessation were best friend`s influence, nicotine dependence and diurnal type. When the best friend was not a smoker, the risk ratio (RR) of quit smoking after the intervention was 7.0 (Cl 95% 4.6 10.7). Of the diurnal types, the morning people seemed to be more likely to quit (RR 2.2 [Cl 95% 1.4 3.6]). Nicotine dependence also elicited an opposite effect: those who scored between 3 and 5 dependence scores were less likely to quit. In conclusion, smoking appears to be a major etiological risk factor for oral health. However, the early signs of periodontal disease were mild in the subjects studied. Based on the opinions of the adolescent s, dental professionals may have a key position in their smoking cessation. The harmful effects of smoking on oral health could be used in counselling. Best friend`s influence, nicotine dependence and diurnal type, all factors associated with smoking cessation, should be taken more carefully into account in the prevention programs for adolescents.

Diakoniatyön paikka ihmisten arjessa

This study examines the diaconia work of the Finnish Evangelical Lutheran Church from the standpoint of clients. The role of diaconia work has grown since the early 1990s recession, and since it established itself as one of the actors along with other social organizations. Previous studies have described the changing role of diaconal work, especially from the standpoint of diaconia workers and co-operators. This research goes back to examine, beyond the activities of the diaconia work of everyday practices, its relations of ruling which are determining practices. The theoretical and methodological framework rises from the thinking of Dorothy E. Smith, the creator of institutional ethnography. Its origins are in feminism, Marxism, phenomenology, etnomethodology, and symbolic interactionism. However, it does not represent any school. Unlike the objectivity-based traditional sociology, institutional ethnography has its starting point in everyday life, and people s subjective experience of it. Everyday life is just a starting point, and is used to examine everyday life s experiences of hidden relations of ruling, linking people and organizations. The level of generalization is just on the relations of ruling. The research task is to examine those meanings of diaconia work which are embedded in its clients experiences. The research task is investigated with two questions: how diaconia work among its clients takes shape and what kinds of relations of ruling exist in diaconia work. The meanings of diaconia work come through an examination of the relations of ruling, which create new forms of diaconal work compared with previous studies. For the study, two kinds of data were collected: a questionnaire and ethnographic fieldwork. The first data set was collected from diaconal workers using the questionnaire. It gives background information of the diaconia work process from the standpoint of the clients. In the ethnographic study there were two phases. The first ethnographic material was collected from one local parish by observing, interviewing clients and diaconal workers and gathering documents. The number of observations was 36 customer appointments, and 29 interviews. The second ethnographic material was included as a part of the analysis, in which ruling relations in people s experiences were collected from the transcribed data. Close reading and narrative analysis are used as analysing methods. The analysis has three phases. First, the experiences are identified with close reading; the following step is to select some of the institutional processes that are shaping those experiences and are relevant for the research. At the third stage, those processes are investigated in order to describe analytically how they determine people s experience. The analysis produces another narrative about diaconia work, which provides tools for examining the diaconal work from a new perspective. Through the analysis it is possible to see diaconia as an exchange ratio, in which the exchange takes place between a client and a diaconia worker, but also more broadly with other actors, such as social workers, shop clerks, or with other parishioners. The exchange ratio is examined from the perspective of power which is embedded in the client s experiences. The analysis reveals that the most important relations of ruling are humiliation and randomness in the exchange ratio of diaconia work; valuating spirituality above the bodily being; and replacing official social work. The results give a map about the relations of ruling of diaconia work which gives tools to look at diaconia work s meanings to the clients. The hidden element of humiliation in the exchange ratio breaks the current picture of diaconia work. The ethos of the holistic encounters and empathic practices are shown to be of another kind when spirituality is preferred to the bodily being. Nevertheless, diaconia appears to be a place for a respectful encounter, especially in situations where the public sector s actors are retreating on liability or clients are in a life crisis. The collapse of the welfare state structures imposes on diaconia work tasks that have not previously belonged to it. At the local level, clients receive partners from diaconia workers in order to advocate them in the welfare system. Actions to influence the wider societal structures are not reached because of lacking resources. An awareness of the oppressive practices of diaconia work and their critical reviewing are the keys to the development of diaconia work, since there are such practices even in holistic and respectful diaconia work. While the research raises new information for the development of diaconia work, it also opens up new aspects for developing other kinds of social work by emphasizing the importance of taking people s experiences seriously. Keywords: diaconia work, institutional ethnography, Dorothy E. Smith, experience, customer, relations of ruling.

On a Ratio of Functions of Exponential Random Variables and Some Applications

Consider L independent and identically distributed exponential random variables (r.vs) X-1, X-2 ,..., X-L and positive scalars b(1), b(2) ,..., b(L). In this letter, we present the probability density function (pdf), cumulative distribution function and the Laplace transform of the pdf of the composite r.v Z = (Sigma(L)(j=1) X-j)(2) / (Sigma(L)(j=1) b(j)X(j)). We show that the r.v Z appears in various communication systems such as i) maximal ratio combining of signals received over multiple channels with mismatched noise variances, ii)M-ary phase-shift keying with spatial diversity and imperfect channel estimation, and iii) coded multi-carrier code-division multiple access reception affected by an unknown narrow-band interference, and the statistics of the r.v Z derived here enable us to carry out the performance analysis of such systems in closed-form.

Thunderstorm climatology and lightning location applications in northern Europe

Thunderstorm is a dangerous electrical phenomena in the atmosphere. Thundercloud is formed when thermal energy is transported rapidly upwards in convective updraughts. Electrification occurs in the collisions of cloud particles in the strong updraught. When the amount of charge in the cloud is large enough, electrical breakdown, better known as a flash, occurs. Lightning location is nowadays an essential tool for the detection of severe weather. Located flashes indicate in real time the movement of hazardous areas and the intensity of lightning activity. Also, an estimate for the flash peak current can be determined. The observations can be used in damage surveys. The most simple way to represent lightning data is to plot the locations on a map, but the data can be processed in more complex end-products and exploited in data fusion. Lightning data serves as an important tool also in the research of lightning-related phenomena, such as Transient Luminous Events. Most of the global thunderstorms occur in areas with plenty of heat, moisture and tropospheric instability, for example in the tropical land areas. In higher latitudes like in Finland, the thunderstorm season is practically restricted to the summer season. Particular feature of the high-latitude climatology is the large annual variation, which regards also thunderstorms. Knowing the performance of any measuring device is important because it affects the accuracy of the end-products. In lightning location systems, the detection efficiency means the ratio between located and actually occurred flashes. Because in practice it is impossible to know the true number of actually occurred flashes, the detection efficiency has to be esimated with theoretical methods.

A Resonant Integrator Based PLL and AC Current Controller for Single Phase Grid Connected PWM-VSI

Grid connected PWM-VSIs are being increasingly used for applications such as Distributed Generation (DG), power quality, UPS etc. Appropriate control strategies for grid synchronisation and line current regulation are required to establish such a grid interconnection and power transfer. Control of three phase VSIs is widely reported in iterature. Conventionally, dq control in Synchronous Reference Frame(SRF) is employed for both PLL and line current control where PI-controllers are used to track the DC references. Single phase systems do not have defined direct (d) and quadrature (q) axis components that are required for SRF transformation. Thus, references are AC in nature and hence usage of PI controllers cannot yield zero steady state errors. Resonant controllers have the ability to track AC references accurately. In this work, a resonant controller based single phase PLL and current control technique are being employed for tracking grid frequency and the AC current reference respectively. A single phase full bridge converter is being operated as a STATCOM for performance evaluation of the control scheme.

Analysis of co-current hydraircooling of food products in bulk

A mathematical model is developed to describe the hydraircooling process when the water and air are flowing in the same direction. The governing equations for the simultaneous heat and mass transfer are solved using finite-difference numerical methods. The half cooling time of the food products is correlated as a function of the dimensionless process parameters. It is observed that a process time of approximately double the half cooling time will result in the food products attaining almost a steady state. The process times of the bulk hydraircooling process and the bulk air precooling process are compared.

Modelling vacuum arcs : from plasma initiation to surface interactions

A better understanding of vacuum arcs is desirable in many of today's 'big science' projects including linear colliders, fusion devices, and satellite systems. For the Compact Linear Collider (CLIC) design, radio-frequency (RF) breakdowns occurring in accelerating cavities influence efficiency optimisation and cost reduction issues. Studying vacuum arcs both theoretically as well as experimentally under well-defined and reproducible direct-current (DC) conditions is the first step towards exploring RF breakdowns. In this thesis, we have studied Cu DC vacuum arcs with a combination of experiments, a particle-in-cell (PIC) model of the arc plasma, and molecular dynamics (MD) simulations of the subsequent surface damaging mechanism. We have also developed the 2D Arc-PIC code and the physics model incorporated in it, especially for the purpose of modelling the plasma initiation in vacuum arcs. Assuming the presence of a field emitter at the cathode initially, we have identified the conditions for plasma formation and have studied the transitions from field emission stage to a fully developed arc. The 'footing' of the plasma is the cathode spot that supplies the arc continuously with particles; the high-density core of the plasma is located above this cathode spot. Our results have shown that once an arc plasma is initiated, and as long as energy is available, the arc is self-maintaining due to the plasma sheath that ensures enhanced field emission and sputtering. The plasma model can already give an estimate on how the time-to-breakdown changes with the neutral evaporation rate, which is yet to be determined by atomistic simulations. Due to the non-linearity of the problem, we have also performed a code-to-code comparison. The reproducibility of plasma behaviour and time-to-breakdown with independent codes increased confidence in the results presented here. Our MD simulations identified high-flux, high-energy ion bombardment as a possible mechanism forming the early-stage surface damage in vacuum arcs. In this mechanism, sputtering occurs mostly in clusters, as a consequence of overlapping heat spikes. Different-sized experimental and simulated craters were found to be self-similar with a crater depth-to-width ratio of about 0.23 (sim) - 0.26 (exp). Experiments, which we carried out to investigate the energy dependence of DC breakdown properties, point at an intrinsic connection between DC and RF scaling laws and suggest the possibility of accumulative effects influencing the field enhancement factor.

Harvesting undelimbed Scots pine (Pinus sylvestris L.) from first thinnings for integrated production of kraft pulp and energy

The present study evaluates the feasibility of undelimbed Scots pine (Pinus sylvestris L.) for integrated production of pulp and energy in a kraft pulp mill from the technical, economic and environmental points of view, focusing on the potential of bundle harvesting. The feasibility of tree sections for pulp production was tested by conducting an industrial wood-handling experiment, laboratory cooking and bleaching trials, using conventional small-diameter Scots pine pulpwood as a reference. These trials showed that undelimbed Scots pine sections can be processed in favourable conditions as a blend with conventional small-diameter pulpwood without reducing the pulp quality. However, fibre losses at various phases of the process may increase when using undelimbed material. In the economic evaluation, both pulp production and wood procurement costs were considered, using the relative wood paying capability of a kraft pulp mill as a determinant. The calculations were made for three Scots pine first-thinning stands with the breast-height diameter of the removal (6 12 cm) as the main distinctive factor. The supply chains included in the comparison were based on cut-to-length harvesting, whole-tree harvesting and bundle harvesting (whole-tree bundling). With the current ratio of pulp and energy prices, the wood paying capability declines with an increase in the proportion of the energy fraction of the raw material. The supply system based on the cut-to-length method was the most efficient option, resulting in the highest residual value at stump in most cases. A decline in the pulp price and an increase in the energy price improved the competitiveness of the whole-tree systems. With short truck transportation distances and low pulp prices, however, the harvesting of loose whole trees can result in higher residual value at stump in small-diameter stands. While savings in transportation costs did not compensate for the high cutting and compaction costs by the second prototype of the bundle harvester, an increase in transportation distances improved its competitiveness. Since harvesting undelimbed assortments increases nutrient export from the site, which can affect soil productivity, the whole-tree alternatives included in the present study cannot be recommended on infertile peatlands and mineral soils. The harvesting of loose whole trees or bundled whole trees implies a reduction in protective logging residues and an increase in site traffic or payloads. These factors increase the risk of soil damage, especially on peat soils with poor bearing capacity. Within the wood procurement parameters which were examined, the CO2 emissions of the supply systems varied from 13 27 kg m3. Compaction of whole trees into bundles reduced emissions from transportation by 30 39%, but these reductions were insufficient to compensate for the increased emissions from cutting and compaction.

Formation and preservation of pedogenic carbonates in South India, links with paleo-monsoon and pedological conditions: Clues from Sr isotopes, U-Th series and REEs

The influence of the pedogenic and climatic contexts on the formation and preservation of pedogenic carbonates in a climosequence in the Western Ghats (Karnataka Plateau, South West India) has been studied. Along the climosequence, the current mean annual rainfall (MAR) varies within a 80 km transect from 6000 mm at the edge of the Plateau to 500 mm inland. Pedogenic carbonates occur in the MAR range of 500-1200 mm. In the semi-arid zone (MAR: 500-900 mm), carbonates occur (i) as rhick hardpan calcretes on pediment slopes and (ii) as nodular horizons in polygenic black soils (i.e. vertisols). In the sub-humid zone (MAR: 900-1500 mm), pedogenic carbonates are disseminated in the black soil matrices either as loose, irregular and friable nodules of millimetric size or as indurated botryoidal nodules of centimetric to pluricentimetric size. They also occur at the top layers of the saprolite either as disseminated pluricentimetric indurated nodules or carbonate-cemented lumps of centimetric to decimetric size. Chemical and isotopic (Sr-87/Sr-86) compositions of the carbonate fraction were determined after leaching with 0.25 N HCl. The corresponding residual fractions containing both primary minerals and authigenic clays were digested separately and analyzed. The trend defined by the Sr-87/Sr-86 signatures of both labile carbonate fractions and corresponding residual fractions indicates that a part of the labile carbonate fraction is genetically linked to the local soil composition. Considering the residual fraction of each sample as the most likely lithogenic source of Ca in carbonates, it is estimated that from 24% to 82% (55% on average) of Ca is derived from local bedrock weathering, leading to a consumption of an equivalent proportion of atmospheric CO2. These values indicate that climatic conditions were humid enough to allow silicate weathering: MAR at the time of carbonate formation likely ranged from 400 to 700 mm, which is 2- to 3-fold less than the current MAR at these locations. The Sr, U and Mg contents and the (U-234/U-238) activity ratio in the labile carbonate fraction help to understand the conditions of carbonate formation. The relatively high concentrations of Sr, U and Mg in black soil carbonates may indicate fast growth and accumulation compared to carbonates in saprolite, possibly due to a better confinement of the pore waters which is supported by their high (U-234/U-238) signatures, and/or to higher content of dissolved carbonates in the pore waters. The occurrence of Ce, Mn and Fe oxides in the cracks of carbonate reflects the existence of relatively humid periods after carbonate formation. The carbonate ages determined by the U-Th method range from 1.33 +/- 0.84 kyr to 7.5 +/- 2.7 kyr and to a cluster of five ages around 20 kyr, i.e. the Last Glacial Maximum period. The young occurrences are only located in the black soils, which therefore constitute sensitive environments for trapping and retaining atmospheric CO2 even on short time scales. The maximum age of carbonates depends on their location in the climatic gradient: from about 20 kyr for centimetric nodules at Mule Hole (MAR = 1100 mm/yr) to 200 kyr for the calcrete at Gundlupet (MAR = 700 mm/yr, Durand et al., 2007). The intensity of rainfall during wet periods would indeed control the lifetime of pedogenic carbonates and thus the duration of inorganic carbon storage in soils. (C) 2010 Elsevier Ltd. All rights reserved.