Fontes alternativas e doses de nitrogênio no milho safrinha em sucessão à soja

A produtividade do milho safrinha pode ser aumentada com a adubação nitrogenada em cobertura mesmo quando cultivado em sucessão à soja. No entanto, existem inconsistências dos resultados especialmente quanto às fontes e doses a serem empregadas nessa modalidade de cultivo. Com o objetivo de avaliar o efeito de fontes e doses de nitrogênio em cobertura no milho safrinha, cultivado após soja no sistema plantio direto, conduziu-se o experimento em um Latossolo Vermelho distrófico, em Chapadão do Céu (GO). O delineamento experimental foi o de blocos ao acaso, em esquema fatorial 4 x 4, com quatro repetições. Os tratamentos foram constituídos pela combinação de quatro fontes (uréia, sulfato de amônio, uréia extrusada com produtos amiláceos (Amiréia® 180S) e sulfonitrato de amônio com inibidor de nitrificação (Entec® 26)) e quatro doses de nitrogênio (0; 30; 60 e 120 kg ha-1). A interação fonte x dose não foi significativa para nenhuma das variáveis avaliadas. A aplicação de nitrogênio na forma de entec proporcionou maiores teores de nitrogênio na folha do milho safrinha que o sulfato de amônio e a amiréia. A produtividade de grãos do milho safrinha foi maior quando o nitrogênio em cobertura foi fornecido na forma de sulfato de amônio, em comparação com a amiréia. A aplicação de nitrogênio em cobertura aumentou os teores de nitrogênio e enxofre na folha, altura da planta, diâmetro do colmo, número de espigas por planta e grãos por espiga, massa de 1.000 grãos e produtividade de grãos do milho safrinha, em sucessão à soja, independentemente da fonte utilizada.

Níveis de adubação para a cultura do milho Safrinha

The objective of this research was to evaluate the effect two hybrids of maize, cultivated on "safrinha" conditions, in different rates of 08-28-16 formula. The treatments consisted of two hybrids of maize (DKB747 e CO32) cultivated in no-tillage system (SPD) and five rates of fertilizer 08-28-16 (100, 200, 300, 400 e 500 kg ha(-1)). The randomized block design was used, with subdivided splots and four replications. The maize was sowed on 02/03/2006 using seeder pneumatic of mechanics traction, with four individual lines, spaced of 0.45 m During maize flowering period, morphologic components were evaluated; the harvest occurred on 150 days after the sowing, when the production components were evaluated. The hybrid of maize DKB747 showed greater efficiency, while the hybrid of maize CO32 was more responsive to rates used. NPK rates on 08-28-16 fomula above 300 kg ha(-1) are not necessary to the hybrid CO32 cultivated on "safrinha" conditions, in Botucatu region, state of São Paulo.

Utilização de resíduos de rochas ornamentais na produção de cerâmica branca

The marble and granite waste come from the process of mining of those ornamental rocks for use in the building industry. Brazil is one of the largest producers of blocks or finished products of ornamental rocks, extracting about 5.2 tons / year. The largest national producers are the states of Espírito Santo, Minas Gerais and Bahia which account for 80% of the Brazilian production. However, the waste total amount during processing of these blocks reaches 40% of the total. The use of the waste produced by this industry in white ceramics could be a form of disposition, because these materials, are thrownasa mud directly at decantation ponds, wastelands or in rivers, without any treatment. The present work has as main purpose to study the influence that reject of the ornamental rocks on the physical and mechanical properties of white ceramics. X-Ray characterizations of raw materials by were performed X-Ray fluorescence, X-Ray diffraction, granulometric, thermogravimetric and thermodiferencial analysis, five formulations were made (0, 10, 20, 30, 40% in granite weight) wich were burned at three temperatures: 1100°C, 1150°C and 1200ºC with 60 minutes of sorling time. After sintering, the samples were submitted to different analyser absorption of water, linear retraction, apparent porosity, apparent specific mass, flexival stronght, and scanning were obtained microscopy. Compatible technological properties within the limits demanded for the production of porcelainized stoneware

Efeito da introdução de resíduo de cinza de forno cerâmico em massa para cerâmica estrutural

The red ceramics and structural ceramics, as they are known, include ceramic materials made by blocks of seals and structures, bricks, tiles, smail flagstones manacles, rustic floors and ornamental materials. Their fabrication uses raw material such as clay and clay sites, with some content of impurity. It has good durability and mechanical strength to compression, low cost, making it one of the mainly used materials in civil engineering. The incorporation of many industrial activities residue to ceramic products is a technological alternative for reducing the environmental impact caused by its carefree disposal. This incorporation can promote chemical change and inertness of metals from residue, by fixation in the glassy phase of ceramic during the burning stage. The main aim of this project is to study the technical feasibility of the addition of ceramic oven ash into formulations of mass for structural ceramics. In this project two kinds of clay (plastic and non-plastic) were used, as well as the ash from firewood used in the process of burning of structural ceramics. A group of experiments was outlined, which permitted the evaluation of the influence of the burning cycle in different temperatures of the ash content in formulations for ceramic blocks through technological properties, mechanical behavior and microstructure. Five samples were processed of each one of the masses of plastic and non-plastic clay without addition of ash and with addition of ash on the percentages of 10 % and 20 %, for temperatures of 850 °C, 950 °C, 1050 °C and 1150 °C, obtained through sinterization process. Among the studied compositions, the one which presented best performance was the mass of clay with 10 % of ash, at temperature of 1150 °C, with the smallest absorption of water, the smallest apparent porosity, specific apparent mass a bit over the others and greatest mechanical resistance to flexion. The composition made confirmed the technical feasibility of the use of ash in the mass for structural ceramics with maintenance of its necessary characteristics for its purposes

Avaliação de espécies forrageiras como plantas de cobertura sobre os componentes de produção do milho cultivado no sistema plantio direto

The Grass, have high relation for C/N and a fascicule root system, is an alternative for use in the system of tillage (SPD) in northeastern Brazil. This work had the objective to assess the effects of three plants and grass cover on the components of production of the corn crop in no-tillage system and accumulation of biomass of their grass. The design was randomized blocks with four replications, with each plot area of 112 m2 (5,6 x 20,0m). The treatments consisted of the corn cultivation, DKB-333-B, about three grass species (Brachiaria decumbens, Brachiaria humidicola and Tifton in the system of tillage and a witness, without vegetation. The B. decumbens provided higher income to the corn crop, producing 5708 kg ha-1, didn't differ of the witness. The use of grass as cover plants are a viable alternative to the SPD of the corn crop, adding value by producing two crops (corn and grass), and protect the soil against erosion and produce forage for ruminants during the between-season.

Desempenho de cultivares transgênicas de soja em sucessão a culturas de inverno em semeadura direta

The objective of this research was to evaluate crop yield and some characteristics and yield components of transgenic soybean cultivars sown after different winter cover crops in the first year under no tillage system. The experimental design was the completely randomized block with split plots and four replications. The main plots consisted of five winter cover crops, white oat (Avena sativa L.), forage turnip (Raphanus sativus L.), barley (Hordeum vulgare L.), wheat (Triticum aestivum L.) and ground pea (Pisum sativum L.) and an area under fallow (spontaneous vegetation). The subplots consisted of six soybean cultivars (BRS 243 RR, BRS 245 RR, BRS 247 RR, BRS 255 RR, BRS 256 RR and BRS 244 RR). Variance analysis for agronomic characteristics showed that soybean yield components were influenced by the interaction between winter crop and soybean cultivar. Thus, final population, number of nodes and pods per plant, nodes dry matter per plant, number of grains per pod and grain yield were affected significantly. When soybean nodulation was evaluated, the treatment with the area under fallow showed lower values. There was difference among winter crops for BRS 243 RR grain yield, white oat showed the highest values.

Estudo térmico e de materiais de um compósito à base de gesso e EPS para construção de casas populares

A housing unit was built to study the thermal performance, and of material using a composite made of gypsum and EPS ground. We used two techniques of construction, using blocks, and filling on the spot. Two compositions of the composite were studied. The blocks were fixed using conventional mortar. In the technical of filling on the spot were used PET bottles up inside the walls to provide mechanical and thermal resistance. Compression tests were realized according to the ABNT standard of sealing bricks. It is going to be shown an analysis of the thermal comfort through the use of thermocouples placed on the walls of the building, internally and externally. The manufacturing viability of houses, using recyclable materials, through the use of composite materials proposed will be demonstrated. The constructive aspects showing the advantages and disadvantages of the technique used also will be broached. The block used presents structural functions and thermal insulating, is low cost and represents an alternative to the use of EPS and PET bottles which are materials that end up occupying much space in the landfills, giving than an ecologically correct use. The results of thermal analysis shows the thermal comfort provided by the composite by the obtainment of a difference between the internal and external surfaces of the walls more exposed to the sun around 7º C. The average temperature of the air inside the building, around 28.0 º C was below the zone of thermal comfort recommended for countries with hot weather

Response of wheat to foliar application of zinc

Wheat is grown in Brazil, mostly in no-till, a system in which the zinc can become potentially deficient, due to excessive application of acidity corrective and phosphate fertilizers in surface and, or at shallow depths. This study aimed to evaluate the effect of foliar application of zinc in agronomic characteristics and yield of wheat. The experimental design was randomized blocks with five replications. Treatments consisted of four doses of zinc (0, 54, 108 and 216g ha(-1) Zn), divided into two foliar applications, the first at tillering (18 days after plant emergence) and the second at the boot stage (65 days after emergence). Foliar application of zinc increased the number of fertile tillers and yield of wheat, however, have little effect on the agronomic characteristics of no-tilled crop with high nutrient content in soil.

Adubação fosfatada para a cultura do sorgo granífero

The objective of this work was to evaluate the influence of crescents phosphorus levels in two hybrids of forage sorghum cultivated on "Zona da Mata" region, State of Alagoas. The treatments were two hybrids of forage sorghum: BRS304 e BRS310, and four phosphorus levels: 0, 25, 50 e 75 kg ha(-1). The statistical design was the complete randomized block with four replications in a split plot scheme. Each experimental plot was constuited for five row of 4.5 m, spaced of 0.70 m. The soil of experimental area received lime to increase basis saturation to 60%. During the sowing, all experimental area received 100 and 120 kg ha(-1) of N and K, respectively. The plants were collected 40, 50, 60 e 70 days after emergence. The mass collected was separaeted in leaves photosynthetic active and remaining of the plant. When the grains were on the "farinaceo duro" stage, the yield was evaluated in 1.4 m(2) on plots center. The phosphoted fertilization increases linearly the sorghum production until 75 kg ha(-1) level of P. The phosphorus provides better grain participation on total dry matter of sorghum plants.

Teores de fósforo, potássio e produção de alface orgânica em diferentes coberturas do solo

The objective of this research was to evaluate the effect of the soil covering with black oats straw, and soil covered with black plastic, in phosphorous and potassium content, and biomass production of lettuce in organic system, over two years. There have been defined five handling systems for soil covering: without cover, covered with black plastic, covered with laying oats, covered with harvested oats, and covered with oats straw in natural form, for growing three cultivars of lettuce. It was used the randomized blocks design in split plot system, with four replications. It has been concluded that butter head lettuce showed biggest phosphorous content, the soils covered with oats straw promoted higher potassium accumulation and lettuce production in second year, while soil covered with black plastic promoted best lettuce production in first year.

Biomass production and accumulation of nutrients in shoots of Giant Guinea sorghum plants

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Desempenho de três variedades de soja na região dos tabuleiros costeiros no estado Alagoas

The objective of this work, the performance of three varieties of soybean on "Tabuleiros Costeiros" State of Alagoas. The installation of the experiment occurred on March 20, 2006, picking up the parcels on 26 August 2006. The experimental design was a randomized blocks with seven repetitions. The experimental plots consisted of ten rows of 4.0 m in length, spaced 0.50 m. In ten plants per plot were marked certain height of the plant in full bloom stage R2 and point of harvest stage R9 considering the distance between the soil surface and apical end of the main stem, the body weight of 100 seeds, grain production and dry weight in (kg ha(-1)) which are calculated from the production harvested per plot. The soybean plants of three varieties showed height below the minimum required for mechanical harvesting. The three varieties yield or more of the traditionally producing. The average of dry matter accumulation obtained show the variety BRS Tracaja as a good option for the production of forage.

Nitrogênio em cobertura, teor de proteína e exportação de nutrientes pelos grãos de painço

Knowledge of the mineral composition of grain and export of nutrients by the proso millet is important to enhance their use and promote more rational fertilizer recommendations. This work aimed to evaluate the protein and nutrients in the grain and export of macronutrient by the proso millet, cv. AL Tibagi, submitted to different doses and times of nitrogen top-dressing application. The experimental design was randomized block design in a 4x2 factorial scheme, constituted by four doses (0, 30, 60, and 120 kg ha(-1) of N) and two application times (14 and 28 days after emergency) of N fertilizer (urea) in top-dressing with four replications. Nitrogen top-dressing application increased grain yield and N content and protein in grains of proso millet, however, reduced the concentration of K. Nitrogen top-dressing fertilization increased the export of N, P, Ca, Mg and S for the grains of proso millet. Proso millet exported an average of macronutrients in the following order: 28.1 kg ha(-1) N; 3.4 kg ha(-1) P; 2.1 kg ha(-1) Ca; 1.4 kg ha(-1) S, 0.9 kg ha(-1) K and 0.8 kg ha(-1) Mg.

Efeito de glyphosate sobre características produtivas em cultivares de soja transgênica e convencional

The aim of this work was to evaluate the grain yield of two soybean cultivars (CD-216 and CD-212RR, divided into three stages: (i) to evaluate the effect of components of production, of simulated drift of glyphosate throught subdoses (1,3; 2,6; 5,3; 11,5 and 22,5 g e. a. ha(-1)) of two cultivars; (ii) to evaluate the influence of glyphosate (720; 1080; 1440 and 1800 g e. a. ha(-1)) in the transgenic soybean yield The experiments carried out in experimental area in the school farm of Uniderp, city of Dorados, MS ina typical Rhodic Haplustox. The experimental design used was in blocks to perhaps The parameters were: heigh oh the pln\ant, number of pods per plants, number of seeds per pod, masss of 100 grains, grain yield (%) of germination, dry mass of seedling, the lengh of radical and air part. The cultivate CD-212RR was not influenced by the subdoses application of glyphosate. Effect of growth stimulus was not observerd due to application of glyphosate subdoses in both cultivars in field conditions. Doses from 11,25 g e. a. ha(-1) caused60 of phytotoxicity in CD-216, at 28 DAA reduce production by 33%. The height and number of pods per plant of cultivar CD-212RR have been reduced and productivity decrease 21% with the application of 1.800 g e.a.ha(-1) of glyphosate.

Análise comparativa entre propriedades mecânicas, termofísicas e geométricas de tijolos produzidos pelos fornos caieira e abóbada

In the State of Rio Grande do Norte potteries are distributed in several counties in the four meso, which are: West Potiguar, Center Potiguar, Agreste Potiguar and East Portiguar. The ceramics, mostly, are responsible for products used in construction as bricks, tiles and white brick and wood used as fuel. This paper had a primary focus in the region of Seridó. The furnaces in this region, used to manufacture bricks are configured Caieira and Valt, in most of them using principles rustic, usually operated in an empirical way, using principles of control rather primitive, predominantly visual control. The focus of this study was to analyze the differences in the thermophysical, mechanical and geometric characteristics of bricks produced by Caieira and vault furnaces, using the NBR 15720 and the evaluation of energy efficiency in both furnaces. Thermophysical characteristics were analyzed through tests to determine the water absorption obtained from the difference between dry mass and wet mass of the sample and analysis of the thermal gradient, the mechanical characteristics from determination of the compressive strength of ceramic brick popularly known as bricks and also analyzed the geometrical characteristics of the bricks in order to verify the homogeneity of manufacturing. The tests showed that the energy difference of the two furnaces is not considered responsible for a significant difference in the properties of the products