The influence of personality traits in predicting information processing and message persuasiveness

Gray‘s (2000) revised Reinforcement Sensitivity Theory (r-RST) was used to investigate personality effects on information processing biases to gain-framed and loss-framed anti-speeding messages and the persuasiveness of these messages. The r-RST postulates that behaviour is regulated by two major motivational systems: reward system or punishment system. It was hypothesised that both message processing and persuasiveness would be dependent upon an individual‘s sensitivity to reward or punishment. Student drivers (N = 133) were randomly assigned to view one of four anti-speeding messages or no message (control group). Individual processing differences were then measured using a lexical decision task, prior to participants completing a personality and persuasion questionnaire. Results indicated that participants who were more sensitive to reward showed a marginally significant (p = .050) tendency to report higher intentions to comply with the social gain-framed message and demonstrate a cognitive processing bias towards this message, than those with lower reward sensitivity.

Managing product quality and reliability under new challenges

This paper presents the findings of an investigation of the challenges Australian manufacturers are currently facing. A comprehensive questionnaire survey was conducted among leading Australian manufacturers. This paper reports the main findings of this study. Evidence indicates that product quality and reliability (Q & R) are the main challenges for Australian manufacturers. Design capability and time to market came second. Results show that there is no effective information exchange between the parties involved in production and quality control. Learning from the past mistakes is not proving to have significant effects on improving product quality. The technological innovation speed is high and companies are introducing as many as 5 new products in a year. This technological speed has pressure on the Q & R of new products. To overcome the new challenges, companies need a Q & R improvement model.

Cross-cultural comparisons of health-related quality of life in Australian and Japanese midlife women

Objective: The purpose of this study was to address (1) the existence of an association between menopausal status and the health-related quality of life (HRQOL) in Australian and Japanese women and (2) the relative contributions of menopausal status, modifiable lifestyle risk factors, health, and sociodemographic factors on HRQOL. Design: The Australian and Japanese Midlife Women's Health Study (AJMWHS) was a multisite, population-based study conducted in 2001 to 2002. Measures were conducted on data collected from a survey questionnaire used for a sample of women from Australia and Japan. HRQOL was assessed with seven subscales from the Short Form-36. Results: The differences seen in physical functioning, general health, and vitality are significant. The results support an effect of country of residence on physical functioning and general health. The impact of menopausal status on HRQOL was significantly associated with bodily pain and role-emotional. The country of residence did have a modifying effect on the relationship between menopausal status and physical functioning. After control for confounders, there was a significant difference between Australian and Japanese women for HRQOL. Menopausal status was not associated with HRQOL in the areas of general health and physical functioning. Modifiable lifestyle risk factors contributed more highly to HRQOL for the Australian women than for the Japanese women. If the women had a lowered body mass index, undertook physical activity, consumed dietary phytoestrogens, and used alcohol, their physical functioning seemed to be better. Differences were seen in the contributions to HRQOL in these areas, with lower body mass index in the Australian women and physical activity in the Japanese women being the highest predictors. Somatic and psychological symptoms seem to negatively affect both Japanese and Australian women's physical functioning, contributing more than sociodemographic factors, menopausal status, and behavioral determinants combined to general health and physical functioning. Conclusions: It is important that that consideration be given to incorporating the same tool within the cross-cultural design of studies so that comparisons between cultures and patterns of healthy aging can be made. The research suggests that there seems to be variations across Australian and Japanese midlife women in some areas of HRQOL and some factors that contribute to these areas.

Converting theory to practice : university-school collaboration on devising strategies for mentoring pedagogical knowledge

There appears no shortage of theorists for preservice teacher education; however many ideas are abandoned without practical applications. Indeed, it can take years for theories to materialise into practice, if they materialise at all. The quality of preservice teacher education is central for enhancing an education system, and mentors’ roles can assist to shape preservice teachers’ development within the school context. Yet mentoring can be haphazard without being underpinned by a theoretical framework. A mentoring model (personal attributes, system requirements, pedagogical knowledge, modelling, and feedback) has emerged from research and the literature to guide mentors’ practices. This qualitative study investigates mentors’ pedagogical knowledge as one factor crucial to the mentoring process. More specifically, this study involves a questionnaire and audio-recorded focus group meetings with experienced mentors (n=14) who deliberated on devising practical applications for mentoring pedagogical knowledge. Findings revealed that these experienced mentors pinpointed practical applications around a mentor’s role for providing pedagogical knowledge to the mentee. These strategies were varied and demonstrated that any one mentoring practice may be approached from a number of different angles. Nevertheless, there were core mentoring practices in pedagogical knowledge such as showing the mentee how to plan for teaching, articulating classroom management approaches, and talking about how to connect learning to assessment. Mentors may require education on current mentoring practices with practical strategies that are linked to theoretical underpinnings.

Peer passenger identity and passenger pressure on young drivers' speeding intentions

Young drivers, aged 17 to 24 years, have the highest fatality rate in Australia. It is believed that part of this risk is due to pressure from peer passengers to engage in speeding; which may be active (i.e., verbal encouragement) or passive (i.e., perceived pressure on the part of the driver). The Theory of Planned Behaviour (TPB) was used to investigate this impact of peer passengers on young drivers, particularly the influence of the type of peer pressure and a driver’s level of identification with their passengers. A scenario-based questionnaire was constructed, informed by focus groups and pilot studies, and distributed to university students (N = 398). The questionnaire measured participants’ intentions and the TPB constructs, including two components of perceived behaviour control, within a baseline scenario as well as an experimental scenario in which the variables of type of pressure and identification were manipulated. Consistent with the hypotheses, the study found that attitudes and self-efficacy significantly predicted intentions over and above the variance explained by the sociodemographic variables of age, gender, self-esteem, sensation seeking, as well as past behaviour and exposure. Across the scenarios, attitudes explained between 4.3% and 14.5%, while self-efficacy to refrain from speeding explained between 4.9% and 17.1%, of the unique variance in intentions to speed. However, contrary to expectations, intentions to speed were found to be higher in the “no passenger” than “passenger present” conditions, although this finding is not completely inconsistent with recent literature. A high level of identification with passengers led to higher intentions to speed than low identification as expected, but, inconsistent with expectations, different types of pressure (i.e., active versus passive) did not influence intentions to speed.

Substance-related expectancies among men who have sex with men : development of psychometric tools to predict unprotected sexual activity

Significant research has demonstrated direct and indirect associations between substance use and sexual behaviour. Substance use is related to sexual risk-taking and HIV seroconversion among some substance-using MSM. It remains unclear what factors mediate or underlie this relationship, and which substances are associated with greater harm. Substance-related expectancies are hypothesised as potential mechanisms. A conceptual model based on social-cognitive theory was tested, which explores the role of demographic factors, substance use, substance-related expectancies and novelty-seeking personality characteristics in predicting unprotected anal intercourse (UAI) while under the influence, across four commonly used substance types. Phase 1, a qualitative study (N = 20), explored how MSM perceive the effects of substance use on their thoughts, feelings and behaviours, including sexual behaviours. Information was attained through discussion and interviews, resulting in the establishment of key themes. Results indicated MSM experience a wide range of reinforcing aspects associated with substance use. General and specific effects were evident across substance types, and were associated with sexual behaviour and sexual risk-taking. Phase 2 consisted of developing a comprehensive profile of substance-related expectancies for MSM (SEP-MSM) regarding alcohol, cannabis, amyl nitrite and stimulants that possessed sound psychometric properties and was appropriate for use among this group. A cross-sectional questionnaire with 249 participants recruited through gay community networks was used to validate these measures, and involved online data collection, participants rating expectancy items and subsequent factor analysis. Results indicated expectancies can be reliably assessed, and predicted substance use patterns. Phase 3 examined demographic factors, substance use, substance-related expectancies, and novelty-seeking traits among another community sample of MSM (N = 277) throughout Australia, in predicting UAI while under the influence. Using a cross-sectional design, participants were recruited through gay community networks and completed online questionnaires. The SEP-MSM, and associated substance use, predicted UAI. This research extends social-cognitive theory regarding sexual behaviour, and advances understanding of the role of expectancies associated with substance use and sexual risk-taking. Future applications of the SEP-MSM in health promotion, prevention, clinical interventions and research are likely to contribute to reducing harm associated with substance-using MSM (e.g., HIV transmission).

A conceptual model for manufacturing performance improvement

Purpose: Important performance objectives manufacturers sought can be achieved through adopting the appropriate manufacturing practices. This paper presents a conceptual model proposing relationship between advanced quality practices, perceived manufacturing difficulties and manufacturing performances. Design/methodology/approach: A survey-based approach was adopted to test the hypotheses proposed in this study. The selection of research instruments for inclusion in this survey was based on literature review, the pilot case studies and relevant industrial experience of the author. A sample of 1000 manufacturers across Australia was randomly selected. Quality managers were requested to complete the questionnaire, as the task of dealing with the quality and reliability issues is a quality manager’s major responsibility. Findings: Evidence indicates that product quality and reliability is the main competitive factor for manufacturers. Design and manufacturing capability and on time delivery came second. Price is considered as the least important factor for the Australian manufacturers. Results show that collectively the advanced quality practices proposed in this study neutralize the difficulties manufacturers face and contribute to the most performance objectives of the manufacturers. The companies who have put more emphasize on the advanced quality practices have less problem in manufacturing and better performance in most manufacturing performance indices. The results validate the proposed conceptual model and lend credence to hypothesis that proposed relationship between quality practices, manufacturing difficulties and manufacturing performances. Practical implications: The model shown in this paper provides a simple yet highly effective approach to achieving significant improvements in product quality and manufacturing performance. This study introduces a relationship based ‘proactive’ quality management approach and provides great potential for managers and engineers to adopt the model in a wide range of manufacturing organisations. Originality/value: Traditional ways of checking product quality are different types of testing, inspection and screening out bad products after manufacturing them. In today’s manufacturing where product life cycle is very short, it is necessary to focus on not to manufacturing them first rather than screening out the bad ones. This study introduces, for the first time, the idea of relationship based advanced quality practices (AQP) and suggests AQPs will enable manufacturers to develop reliable products and minimize the manufacturing anomalies. This paper explores some of the attributes of AQP capable of reducing manufacturing difficulties and improving manufacturing performances. The proposed conceptual model contributes to the existing knowledge base of quality practices and subsequently provides impetus and guidance towards increasing manufacturing performance.

Impact of a data warehouse model for improved decision-making process in healthcare

The health system is one sector dealing with a deluge of complex data. Many healthcare organisations struggle to utilise these volumes of health data effectively and efficiently. Also, there are many healthcare organisations, which still have stand-alone systems, not integrated for management of information and decision-making. This shows, there is a need for an effective system to capture, collate and distribute this health data. Therefore, implementing the data warehouse concept in healthcare is potentially one of the solutions to integrate health data. Data warehousing has been used to support business intelligence and decision-making in many other sectors such as the engineering, defence and retail sectors. The research problem that is going to be addressed is, "how can data warehousing assist the decision-making process in healthcare". To address this problem the researcher has narrowed an investigation focusing on a cardiac surgery unit. This research used the cardiac surgery unit at the Prince Charles Hospital (TPCH) as the case study. The cardiac surgery unit at TPCH uses a stand-alone database of patient clinical data, which supports clinical audit, service management and research functions. However, much of the time, the interaction between the cardiac surgery unit information system with other units is minimal. There is a limited and basic two-way interaction with other clinical and administrative databases at TPCH which support decision-making processes. The aims of this research are to investigate what decision-making issues are faced by the healthcare professionals with the current information systems and how decision-making might be improved within this healthcare setting by implementing an aligned data warehouse model or models. As a part of the research the researcher will propose and develop a suitable data warehouse prototype based on the cardiac surgery unit needs and integrating the Intensive Care Unit database, Clinical Costing unit database (Transition II) and Quality and Safety unit database [electronic discharge summary (e-DS)]. The goal is to improve the current decision-making processes. The main objectives of this research are to improve access to integrated clinical and financial data, providing potentially better information for decision-making for both improved from the questionnaire and by referring to the literature, the results indicate a centralised data warehouse model for the cardiac surgery unit at this stage. A centralised data warehouse model addresses current needs and can also be upgraded to an enterprise wide warehouse model or federated data warehouse model as discussed in the many consulted publications. The data warehouse prototype was able to be developed using SAS enterprise data integration studio 4.2 and the data was analysed using SAS enterprise edition 4.3. In the final stage, the data warehouse prototype was evaluated by collecting feedback from the end users. This was achieved by using output created from the data warehouse prototype as examples of the data desired and possible in a data warehouse environment. According to the feedback collected from the end users, implementation of a data warehouse was seen to be a useful tool to inform management options, provide a more complete representation of factors related to a decision scenario and potentially reduce information product development time. However, there are many constraints exist in this research. For example the technical issues such as data incompatibilities, integration of the cardiac surgery database and e-DS database servers and also, Queensland Health information restrictions (Queensland Health information related policies, patient data confidentiality and ethics requirements), limited availability of support from IT technical staff and time restrictions. These factors have influenced the process for the warehouse model development, necessitating an incremental approach. This highlights the presence of many practical barriers to data warehousing and integration at the clinical service level. Limitations included the use of a small convenience sample of survey respondents, and a single site case report study design. As mentioned previously, the proposed data warehouse is a prototype and was developed using only four database repositories. Despite this constraint, the research demonstrates that by implementing a data warehouse at the service level, decision-making is supported and data quality issues related to access and availability can be reduced, providing many benefits. Output reports produced from the data warehouse prototype demonstrated usefulness for the improvement of decision-making in the management of clinical services, and quality and safety monitoring for better clinical care. However, in the future, the centralised model selected can be upgraded to an enterprise wide architecture by integrating with additional hospital units’ databases.

Building information modeling in the Australian architecture engineering and construction industry

Building Information Modeling (BIM) is a modern approach to the design, documentation, delivery, and life cycle management of buildings through the use of project information databases coupled with object-based parametric modeling. BIM has the potential to revolutionize the Architecture, Engineering and Construction (AEC) industry in terms of the positive impact it may have on information flows, working relationships between project participants from different disciplines and the resulting benefits it may achieve through improvements to conventional methods. This chapter reviews the development of BIM, the extent to which BIM has been implemented in Australia, and the factors which have affected the up-take of BIM. More specifically, the objectives of this chapter are to investigate the adoption of BIM in the Australian AEC industry and factors that contribute towards the uptake (or non uptake) of BIM. These objectives are met by a review of the related literature in the first instance, followed by the presentation of the results of a 2007 postal questionnaire survey and telephone interviews of a random sample of professionals in the Australian AEC industry. The responses suggest that less than 25 percent of the sample had been involved in BIM – rather less than might be expected from reading the literature. Also, of those who have been involved with BIM, there has been very little interdisciplinary collaboration. The main barriers impeding the implementation of BIM widely across the Australian AEC industry are also identified. These were found to be primarily a lack of BIM expertise, lack of awareness and resistance to change. The benefits experienced as a result of using BIM are also discussed. These include improved design consistency, better coordination, cost savings, higher quality work, greater productivity and increased speed of delivery. In terms of conclusion, some suggestions are made concerning the underlying practical reasons for the slow up-take of BIM and the successes for those early adopters. Prospects for future improvement are discussed and proposals are also made for a large scale worldwide comparative study covering industry-wide participants

LEGO robotics : an authentic problem solving tool?

With the current curriculum focus on correlating classroom problem solving lessons to real-world contexts, are LEGO robotics an effective problem solving tool? This present study was designed to investigate this question and to ascertain what problem solving strategies primary students engaged with when working with LEGO robotics and whether the students were able to effectively relate their problem solving strategies to real-world contexts. The qualitative study involved 23 Grade 6 students participating in robotics activities at a Brisbane primary school. The study included data collected from researcher observations of student problem solving discussions, collected software programs, and data from a student completed questionnaire. Results from the study indicated that the robotic activities assisted students to reflect on the problem solving decisions they made. The study also highlighted that the students were able to relate their problem solving strategies to real-world contexts. The study demonstrated that while LEGO robotics can be considered useful problem solving tools in the classroom, careful teacher scaffolding needs to be implemented in regards to correlating LEGO with authentic problem solving. Further research in regards to how teachers can best embed realworld contexts into effective robotics lessons is recommended.

Supply chain sustainability : a relationship management approach moderated by culture and commitment

This paper explores the nature of relationship management on construction projects in Australia and examines the effects of culture, by means of Schwarz’s value survey, on relationships under different contract strategies. The research was based on the view that the development of a sustainable supply chain depends on the transfer of knowledge and capabilities from the larger players in the supply chain through collaboration brought about by relationship management. The research adopted a triangulated approach in which quantitative data were collected by questionnaire, interviews were conducted to explore and enrich the quantitative data and case studies were undertaken in order to illustrate and validate the fi ndings. The aim was to investigate how values and attitudes enhance or reduce the incorporation of the supply chain into the project. From the research it was found that the degree of match and mismatch between values and contract strategy impacts commitment and the engagement and empowerment of the supply chain.

Responsiveness of the Effective Consumer Scale (EC-17)

Objective. The Effective Consumer Scale (EC-17) comprises 17 items measuring the main skills and behaviors people need to effectively manage their healthcare. We tested the responsiveness of the EC-17. Methods. Participants, in 2 waves of a 6-week Arthritis Self-Management Program (ASMP) from Arthritis Ireland, received a questionnaire at the first and last week of the weekly ASMP. The questionnaire included the EC-17 and 10 other measures for arthritis. Deficits, mean change, and standard deviations were calculated at baseline and Week 6. The EC-17 scores were compared to the Arthritis Self-Efficacy (ASE) and Patient Activation Measure (PAM) scales. Results were presented at OMERACT 9. Results. There is some overlap between the EC-17 and the ASE and PAM; however, most items of greatest deficit in the EC-17 are not covered by those scales. In 327 participants representing both intervention waves (2006 and 2007), the EC-17 was more efficient than the ASE but less efficient than the PAM for detecting improvements after the ASMP, and was moderately correlated with the PAM. Conclusion. The EC-17 appears to measure different skills and attributes than the ASE and PAM. Discussions with participants at OMERACT 9 agreed that it is worthwhile to measure the skills and attributes of an effective consumer, and supported the development of an intervention (such as proposed online decision aids) that would include education in the categories in the EC-17.

A rebirth of physical activity in parents : applying a theory-based approach

Physical inactivity is a serious concern both nationally and internationally. Despite the numerous benefits of performing regular physical activity, many individuals lead sedentary lifestyles. Of concern, though, is research showing that some population sub-groups are less likely to be active, such as parents of young children. Although there is a vast amount of research dedicated to understanding people.s physical activity-related behaviours, there is a paucity of research examining those factors that influence parental physical activity. More importantly, research applying theoretical models to understand physical activity decision-making among this at-risk population is limited. Given the current obesity epidemic, the decline in physical activity with parenthood, and the many social and health benefits associated with regular physical activity, it is important that adults with young children are sufficiently active. In light of the dearth of research examining parental physical activity and the scant research applying a theory-based approach to gain this understanding, the overarching aim of the current program of research was to adopt a mixed methods approach as well as use sound theoretical frameworks to understand the regular physical activity behaviour of mothers and fathers with young children. This program of research comprised of three distinct stages: a qualitative stage exploring individual, social, and psychological factors that influence parental regular physical activity (Stage 1); a quantitative stage identifying the important predictors of parental regular physical activity intentions and behaviour using sound theoretical frameworks and testing a single-item measure for assessing parental physical activity behaviour (Stage 2); and a qualitative stage exploring strategies for an intervention program aimed at increasing parental regular physical activity (Stage 3). As a thesis by publication, eight papers report the findings of this program of research; these papers are presented according to the distinct stages of investigation that guided this program of research. Stage One of the research program comprised a qualitative investigation using a focus group/interview methodology with parents of children younger than 5 years of age (N = 40; n = 21 mothers, n = 19 fathers) (Papers 1, 2, and 3). Drawing broadly on a social constructionist approach (Paper 1), thematic analytic methods revealed parents. understandings of physical activity (e.g., requires effort), patterns of physical activity-related behaviours (e.g., grab it when you can, declining physical activity habits), and how constructions of social role expectations might influence parents. physical activity decision making (e.g., creating an active family culture, guilt and selfishness). Drawing on the belief-based framework of the TPB (Paper 2), thematic content analytic methods revealed parents. commonly held beliefs about the advantages (e.g., improves parenting practices), disadvantages (e.g., interferes with commitments), barriers (e.g., time), and facilitators (e.g., social support) to performing regular physical activity. Parents. normative beliefs about social approval from important others or groups (e.g., spouse/partner) were also identified. Guided by theories of social support, Paper Three identified parents. perceptions about the specific social support dimensions that influence their physical activity decision making. Thematic content analysis identified instrumental (e.g., providing childcare, taking over chores), emotional (e.g., encouragement, companionship), and informational support (e.g., ideas and advice) as being important to the decision-making of parents in relation to their regular physical activity behaviour. The results revealed also that having support for being active is not straightforward (e.g., guilt-related issues inhibited the facilitative nature of social support for physical activity). Stage Two of the research program comprised a quantitative examination of parents. physical activity intentions and behaviour (Papers 4, 5, 6, and 7). Parents completed an extended TPB questionnaire at Time 1 (N = 580; n = 288 mothers, n = 292 fathers) and self-reported their physical activity at Time 2, 1 week later (N = 458; n = 252 mothers, n = 206 fathers). Paper Four revealed key behavioural (e.g., improving parenting practices), normative (e.g., people I exercise with), and control (e.g., lack of time) beliefs as significant independent predictors of parental physical activity. A test of the TPB augmented to include the constructs of self-determined motivation and planning was assessed in Paper Five. The findings revealed that the effect of self-determined motivation on intention was fully mediated by the TPB variables and the impact of intention on behaviour was partially mediated by the planning variables. Slight differences in the model.s motivational sequence between the sexes were also noted. Paper Six investigated, within a TPB framework, a range of social influences on parents. intentions to be active. For both sexes, attitude, perceived behavioural control, group norms, friend general support, and an active parent identity predicted intentions, with subjective norms and family support further predicting mothers. intentions and descriptive norms further predicting fathers. intentions. Finally, the measurement of parental physical activity was investigated in Paper Seven of Stage Two. The results showed that parents are at risk of low levels of physical activity, with the findings also revealing validation support for a brief single-item physical activity measure. Stage Three of the research program comprised a qualitative examination of parents. (N = 12; n = 6 mothers, n = 6 fathers) ideas for strategies that may be useful for developing and delivering an intervention program aimed at increasing parental physical activity (Paper 8). Parents revealed a range of strategies for what to include in a physical activity intervention designed for parents of young children. For example, parents identified persuasion and information type messages, problem-solving strategies that engage parents in generating a priority list of their lifestyle commitments, and behavioural modification techniques such as goal setting and incentives. Social intervention strategies (e.g., social comparison, counselling) and environmental approaches (e.g., community-based integrative parent/child programs) were also identified as was a skill-based strategy in helping parents generate a flexible life/family plan. Additionally, a range of strategies for how to best deliver a parental physical activity intervention was discussed. Taken as a whole, Paper Eight found that adopting a multifaceted approach in both the design and implementation of a resultant physical activity intervention may be useful in helping to increase parental physical activity. Overall, this program of research found support for parents as a unique group who hold both similar and distinctive perceptions about regular physical activity to the general adult population. Thus, these findings highlight the importance of targeting intervention strategies for parents of young children. Additionally, the findings suggest that it might also be useful to tailor some messages specifically to each sex. Effective promotion of physical activity in parents of young children is essential given the low rate of activity in this population. Results from this program of research highlight parents as an at-risk group for inactivity and provide an important first step in identifying the factors that influence both mothers. and fathers. physical activity decision making. These findings, in turn, provide a foundation on which to build effective intervention programs aimed at increasing parents. regular physical activity which is essential for ensuring the health and well-being of parents with young children.

Developing financial decision support for highway infrastructure sustainability

The development of highway infrastructure typically requires major capital input over a long period. This often causes serious financial constraints for investors. The push for sustainability has added new dimensions to the complexity in the evaluation of highway projects, particularly on the cost front. This makes the determination of long-term viability even more a precarious exercise. Life-cycle costing analysis (LCCA) is generally recognised as a valuable tool for the assessment of financial decisions on construction works. However to date, existing LCCA models are deficient in dealing with sustainability factors, particularly for infrastructure projects due to their inherent focus on the economic issues alone. This research probed into the major challenges of implementing sustainability in highway infrastructure development in terms of financial concerns and obligations. Using results of research through literature review, questionnaire survey of industry stakeholders and semi-structured interview of senior practitioners involved in highway infrastructure development, the research identified the relative importance of cost components relating to sustainability measures and on such basis, developed ways of improving existing LCCA models to incorporate sustainability commitments into long-term financial management. On such a platform, a decision support model incorporated Fuzzy Analytical Hierarchy Process and LCCA for the evaluation of the specific cost components most concerned by infrastructure stakeholders. Two real highway infrastructure projects in Australia were then used for testing, application and validation, before the decision support model was finalised. Improved industry understanding and tools such as the developed model will lead to positive sustainability deliverables while ensuring financial viability over the lifecycle of highway infrastructure projects.

Predictors of and reasons for pacifier use in first-time mothers : an observational study

Background: The use of pacifiers is commonplace in Australia and has been shown to be negatively associated with breastfeeding duration. In order to influence behaviour related to the use of pacifiers it is important to understand the reasons for their use. The primary aim of this observational study was to investigate who (if anyone) advises first-time mothers to give a pacifier and the reasons for which they first give (or try to give) a pacifier to their infant. Additionally, this study investigated the predictors of pacifier use and the relationship between pacifier use and breastfeeding duration. Methods: In total, 670 Australian first-time mothers recruited as part of the NOURISH trial completed a questionnaire regarding infant feeding and pacifier use. Results: Pacifiers were introduced by 79% of mothers, of whom 28.7% were advised to use a pacifier by their mother/mother-in-law with a further 22.7% being advised by a midwife. The majority of mothers used a pacifier in order to soothe their infant (78.3%), to help put them to sleep (57.4%) and to keep them comforted and quiet (40.4%). Pacifiers given to infants before four weeks (adjHR 3.67; 95%CI 2.14–6.28) and used most days (adjHR 3.28; 95%CI 1.92–5.61) were significantly associated with shorter duration of breastfeeding. Conclusions: This study identifies an opportunity for educating new mothers and their support network, particularly their infant’s grandmothers, with regards to potential risks associated with the early and frequent use of a pacifier, and alternative methods for soothing their infant, in order to reduce the use of pacifiers and their potentially negative effect on breastfeeding duration