Análise das disfunções da organização burocrática e suas implicações para a Qualidade de Vida no Trabalho (QVT): o caso de uma unidade de segurança pública, em Mato Grosso do Sul, Brasil

O objetivo geral deste estudo consistiu em identificar as dimensões da burocracia e relacioná-las aos elementos de disfunção burocrática existentes em uma unidade da administração pública estadual, no âmbito da Criminalística, que influenciam a Qualidade de Vida no Trabalho (QVT), considerando as abordagens humanista e restritiva, no contexto da Coordenadoria Geral de Perícias (CGP), a partir da percepção dos servidores lotados nesta unidade da Segurança Pública. Utilizou-se a pesquisa descritiva por meio de uma abordagem qualitativa de estudo de caso, com amostra constituída por peritos criminais do Instituto de Criminalística "Hercílio Macellaro" (ICHM), lotados na Capital do Estado, Campo Grande - MS. O método de coleta de dados adotado para a constatação das disfunções burocráticas foi um questionário com assertivas fechadas de alternativas de múltipla escolha, cujo modelo de resposta compõe-se por quatro níveis de gradação (sempre, muitas vezes, poucas vezes, nunca), elaborado a partir do modelo de Maia e Pinto (2007). Em outro momento, foi aplicado o questionário apresentando questões que abordavam os elementos da QVT propostos por Werther e Davis (1983), adaptado para o presente estudo. Para este questionário, as questões foram apresentadas em escala polarizada de satisfação do tipo Likert, composta por cinco alternativas (discordo totalmente, discordo parcialmente, não concordo nem discordo, concordo parcialmente e concordo totalmente), caracterizando a opinião do participante. A interpretação dos dados permitiu analisar a existência de quatro elementos de disfunção burocrática: internalização das regras, excesso de formalismo, rotinas e registros, resistência às mudanças e exibição de sinais de autoridade. De uma lado, a abordagem humanista foi possível analisar que os respondentes da pesquisa evidenciam ruídos na comunicação, tanto vertical quanto horizontal, o que indica a necessidade de mais transparência e clareza possível dentro e entre as equipes nos departamentos e destes com os superiores hierárquicos, a fim de proporcionar maior entendimento entre todos os envolvidos e a eliminação de conflitos que possam ocorrer através de informações distorcidas. Por outro lado, a análise da abordagem restritiva sobre a QVT neste estudo permitiu observar a predominância da racionalidade instrumental no contexto organizacional do ICHM, uma vez que está voltada somente para atender a seus processos organizacionais fundamentados no binômio técnica versus produção. Pode-se, assim, considerar que o ICHM está fortemente ligado ao modelo de organização burocrática, exteriorizado por quatro níveis de disfunções burocráticas. Além disso, como pretexto pela busca da eficiência, eficácia e efetividade, a práxis organizacional do ICHM parece convergir para dois modelos de produção: fordista e taylorista, as quais reforçam a corrente restritiva da QVT, que parece confirmar a manutenção da coisificação do sujeito em relação ao objeto, isto é, quando se pensava que o ser orgânico pudesse desfrutar do desenvolvimento tecnológico alcançado em várias ciências, paradoxalmente, o que tem sido visto é o trabalho como um fim em si mesmo.

A produção orgânica de citros no Vale do Rio Caí/RS

Há uma preocupação crescente sobre a necessidade de produção e consumo de alimentos mais saudáveis, sem uso de agrotóxicos nem fertilizantes químicos. Neste contexto se insere a prática da agricultura orgânica que, contudo, apresenta resultados ainda pouco avaliados. Assim, pretendeu-se, nesta pesquisa diagnosticar a produção orgânica na região citrícola do Vale do Rio Caí, no Rio Grande do Sul. Inicialmente foram selecionadas propriedades de oito agricultores, todas já convertidas ao sistema orgânico de produção há pelo menos cinco anos. Para tanto foram aplicadas entrevistas semi-estruturadas junto às unidades familiares, visando diagnosticar os aspectos sociais, econômicos e técnicoambientais. Os agricultores orgânicos mostram-se satisfeitos com o sistema orgânico de produção, que de maneira geral proporciona boas produtividades com custos de produção menores do que no sistema convencional de cultivo. Os agricultores que se dedicam ao sistema orgânico de produção revelam bom conhecimento sobre o meio ambiente, plantas, solos e processos agroecológicos, aspectos políticos, econômicos e sociais, adquiridos através da participação em cursos, palestras, congressos, dias de campo, treinamentos, e através das reuniões e assembléias da Cooperativa ECOCITRUS. A constante troca de experiências entre os agricultores orgânicos tem contribuído na melhoria da qualificação técnica dos produtores, além de melhor conscientizá-los nos aspectos políticos, econômicos e sociais. A participação dos produtores na ECOCITRUS tem proporcionado melhor organização dos mesmos, contribuindo na viabilização da produção orgânica, inclusive com vantagens econômicocomerciais, pela obtenção de insumos orgânicos, venda da produção e estímulo ao beneficiamento da produção, visando agregar renda à propriedade.

Antitruste: sanção de desinvestimentos em ativos: um estudo de caso no processo administrativo no 08012.11142/2006-79

O presente trabalho é um estudo de caso, tendo como objetivo principal avaliar a sanção de desinvestimentos de ativos, isto é, a pena de cisão de sociedade, transferência de controle societário e/ou venda de ativos, conforme disposto no art. 38, inciso V, da Lei no 12.529/2011 (Lei de Defesa da Concorrência). Para tanto, parte-se da exposição da decisão proferida pelo Tribunal do Conselho Administrativo de Defesa Econômica (Cade) no Processo Administrativo no 08012.011142/2006-79, denominado Cartel de Cimento e Concreto. Tal decisão condenou as empresas fabricantes de cimento e prestadoras de serviços de concretagem a desinvestirem ativos próprios, frutos de aquisição ou de crescimento orgânico. É importante destacar que essa decisão sofreu relevante modificação ao longo do julgamento, decorrente da alteração de entendimento pelos conselheiros do Cade. Em um segundo momento, o trabalho procura propiciar ao leitor uma visão ampla (prós e contras) dos tipos de remédios ou sanções existentes e aplicáveis aos casos em que se determina a medida de desinvestimento, por meio da seleção de alguns casos internacionais e nacionais, escolhidos a partir de casos amplamente tratados pela doutrina, e também citados no julgamento do Processo Administrativo no 08012.011142/2006-79. A seguir, aborda-se a questão do desinvestimento específico ocorrido no Processo Administrativo no 08012.011142/2006-79, buscando-se evidenciar, a partir da análise do aparente choque dos votos do conselheiro-relator e do conselheiro-revisor, que as bases utilizadas para determinação dos desinvestimentos carecem de parâmetros concretos para sua aplicação. Ao final do estudo acerca do desinvestimento, delineia-se uma proposição para solução jurídica. Ao final, conclui-se que a aplicação de medidas de desinvestimentos como penalização por participação em cartel não é escolha fácil, e sua utilização tampouco é pacífica, devendo-se levar em conta alguns aspectos relevantes para que possa ser utilizada de maneira legítima e garantir a sua melhor eficácia.

Determinação de cinzas e matéria orgânica

Aula Prática 1

Influência da profundidade e dos parâmetros ambientais sobre o desenvolvimento de Gracilaria birdiae (Rhodophyta, Gracilariales) em viveiro de camarão

This study evaluates the influence of depth and environmental parameters on the development of Gracilaria birdiae Plastino & Oliveira (Gracilariaceae Rhodophyta) in an organic shrimp pound (Litopenaeus vannamei) under euthrophical conditions. PVC structures (module) witch four ropes laden with 150 g of macroalgae each, were kept during 35 days at three different depths (surface, 10 and 20 cm depth). Wet biomass weighing and environmental parameters (temperature, salinity, turbidity, pH, transparence, precipitation, evaporation, insolation, accumulated solar radiation, nitrite, nitrate, ammonium and orthophosphate) were measured weekly. At all three proposed depths, the macroalgae displayed a higher biomass at the end of experiment than at the initial inoculations. The module kept at a 10 cm depth presented the greatest average biomass (186,3), followed by that kept at 20 cm (180,4 g) and the surface module (169,9 g). Biomass variations showed algae to suffer the direct effects of depths. Biomass loss was associated with the factors that influence light penetration, such as sediment deposits above the thallus, rate of evaporation and precipitation. The smallest loses occurred in the algae kept on surface (0,16%), followed by the algae kept at 20 cm (0,20%) and 10 cm (0,22%). The specific growth rate (SGR) of G. birdiae showed no significant difference between the three depths nor the sample periods. Nevertheless, the modules kept at 10 and 20 cm depths presented similar growth evolution, both growing 0,38%·per day-1, while the module kept on surface had an average SGR of 0,36%·day-1. The models related to growth rate demonstrated temperature, salinity, pH, orthophosphate, ammonium, precipitation and turbidity as the principal environmental parameters influencing the development of G. birdiae

Genotoxicidade e composição do material particulado emitido pela queima de Biomassa: um estudo de caso em Tangará da Serra, Região da Amazônia Brasileira

Tangara da Serra is located on southwestern Mato Grosso and is found to be on the route of pollutants dispersion originated in the Legal Amazon s deforestation area. This region has also a wide area of sugarcane culture, setting this site quite exposed to atmospheric pollutants. The objective of this work was to evaluate the genotoxicity of three different concentrations of organic particulate matter which was collected from August through December / 2008 in Tangara da Serra, using micronucleus test in Tradescantia pallida (Trad-MCN). The levels of particulate matter less than 10μm (MP10) and black carbon (BC) collected on the Teflon and polycarbonate filters were determined as well. Also, the alkanes and polycyclic aromatic hydrocarbons (PAHs) were identified and quantified on the samples from the burning period by gas chromatography detector with flame ionization detection (GC-FID). The results from the analyzing of alkanes indicate an antropic influence. Among the PAHs, the retene was the one found on the higher quantity and it is an indicator of biomass burning. The compounds indene(1,2,3-cd)pyrene and benzo(k)fluoranthene were identified on the samples and are considered to be potentially mutagenic and carcinogenic. By using Trad-MCN, it was observed a significant increase on the micronucleus frequency during the burning period, and this fact can be related to the mutagenic PAHs which were found on such extracts. When the period of less burnings is analyzed and compared to the negative control group, it was noted that there was no significant difference on the micronuclei rate. On the other hand, when the higher burning period is analyzed, statistically significant differences were evident. This study showed that the Trad-MCN was sensible and efficient on evaluating the genotoxicity potencial of organic matter from biomass burning, and also, emphasizes the importance of performing a chemical composition analysis in order to achieve a complete diagnosis on environmental risk control

Síntese, caracterização e estudo da regeneração do silicoaluminofosfato-11 (SAPO-11)

heterogeneous catalyst such as a silicoaluminophosphate, molecular sieve with AEL (Aluminophosphate eleven) structure such as SAPO-11, was synthesized through the hydrothermal method starting from silica, pseudoboehmite, orthophosphoric acid (85%) and water, in the presence of a di-isopropylamine organic template. For the preparation of SAPO-11 in a dry basis it was used as reactants: DIPA; H3PO4; SiO4; Pseudoboehmite and distilled water. The crystallization process occurred when the reactive hydrogel was charged into a vessel and autoclaved at 200ºC for a period of 72 hours under autogeneous pressure. The obtained material was washed, dried and calcined to remove the molecular sieves of DIPA. The samples were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), infrared spectroscopy (FT-IR), nitrogen adsorption (BET) and thermal analysis (TG/DTG). The acidic properties were determined using adsorption of nbutylamine followed by programmed thermodessorption. This method revealed that SAPO-11 shows an acidity that ranges from weak to moderate. However, a small quantity of strong acid sites could be detected there. The deactivation of the catalysts was conducted by artificial coking followed by the cracking of the n-hexane in a fixed bed with a continuous flow micro-reactor coupled on line to a gas chromatograph. The main products obtained were: ethane, propane, isobutene, n-butane, n-pentane and isopentane. The Vyazovkin (model-free) kinetics method was used to determine the regeneration and removal of the coke

Síntese e caracterização de espinélios a base de Cu, Fe e Cr para pigmentos cerâmicos

Inorganic pigment comprises a host lattice, which is part of the chromophore component (usually a transition metal cation) and possible components modifiers, which stabilize, add or restate the properties pigments. Among the materials with spinel, ferrites, and the chromite stand out, because they have broad technological importance in the area of materials, applicability, pigments, catalytic hydrogenation, thin film, ceramic tiles, among others. The present work, pigments containing CuFe2O4, CuCr2O4,e CuFeCrO4, were synthesized by a method that makes use of gelatin as organic precursor using their application to ceramic pigments. The pigments were characterized by X-ray diffraction (XRD), Infrared spectroscopy, scanning electron microscopy (SEM) spectroscopy in the UV-visible and Colorimetry. The results confirmed the feasibility of the synthetic route used, with respect to powders synthesized, there is the formation of spinel phase from 500°C, with an increase in crystallinity and the formation of other phases. The pigments were shown to be crystalline and the desired phases were obtained. The copper chromite have hues ranging from green to black according to the calcination temperature, while the copper chromite doped with iron had brownish. The ferrites showed copper color and darker brown to black, which may indicate an interesting factor because of the importance of black pigment

Síntese e caracterização de cerâmicas nanométricas para produção de gás de síntese

In this work, ceramic powders belonging to the system Nd2-xSrxNiO4 (x = 0, 0.4, 0.8, 1.2 and 1.6) were synthesized for their use as catalysts to syngas production partial. It was used a synthesis route, relatively new, which makes use of gelatin as organic precursor. The powders were analyzed at several temperatures in order to obtain the perovskite phase and characterized by several techniques such as thermal analysis, X-rays diffraction, Rietveld refinement method, specific surface area, scanning electron microscopy, energy dispersive spectroscopy of X-rays and temperature programmed reduction. The results obtained using these techniques confirmed the feasibility of the synthesis method employed to obtain nanosized particles. The powders were tested in differential catalytic conditions for dry reforming of methane (DRM) and partial oxidation of methane (POM), then, some systems were chosen for catalytic integrals test for (POM) indicating that the system Nd2-xSrxNiO4 for x = 0, 0.4 and 1.2 calcined at 900 °C exhibit catalytic activity on the investigated experimental conditions in this work without showing signs of deactivation

Desenvolvimento e caracterização de filtros cerâmicos para aplicações a altas temperaturas

Ceramic filters are cellular structures that can be produced by various techniques, among which we highlight the replication method, or method of polymeric sponge. This method consists of impregnating polymeric foam with ceramic slurry, followed by heat treatment, where will occur decomposition of organic material and the sinter of the ceramic material, resulting in a ceramic whose structure is a replica of the impregnated sponge. Ceramic filters have specific properties that make this type of material very versatile, used in various technological applications such as filters for molten metals and burners, make these materials attractive candidates for high temperature applications. In this work we studied the systems Al2O3-LZSA ceramic filters processed in the laboratory, and commercial Al2O3-SiC ceramics filters, both obtained by the replica method, this work proposes the thermal and mechanical characterization. The sponge used in the processing of filters made in the laboratory was characterized by thermogravimetric analysis. The ceramic filters were characterized by compressive strength, flexural strength at high temperatures, thermal shock, permeability and physical characterization (density and porosity) and microstructural (MEV and X-rays). From the results obtained, the analysis was made of the mechanical behavior of these materials, comparing the model proposed by Gibson and Ashby model and modified the effective area and the tension adjusted, where the modified model adapted itself better to the experimental results, representing better the mechanical behavior of ceramic filters obtained by the replica method

Síntese enzimática de ésteres de açúcar: surfactantes e polímeros como novos materiais ambientalmente seguros

Sugar esters are substances which possess surfactant, antifungical and bactericidal actions and can be obtained through two renewable sources of raw materials: sugars and vegetable oils. Their excellent biodegradability, allied to lhe fact that they are non toxic, insipid, inodorous, biocompatible, no-ionic, digestible and because they can resist to adverse conditions of temperature, pH and salinity, explain lhe crescent use of these substances in several sections of lhe industry. The objective of this thesis was to synthesize and characterize surfactants and polymers containing sugar branched in their structures, through enzymatic transesterification of vinyl esters and sugars, using alkaline protease from Bacillus subtilis as catalyst, in organic medium (DMF).Three types of sugars were used: L-arabinose, D-glucose and sucrose and two types of vinyl esters: vinyl laurate and vinyl adipate. Aiming to reach high conversions from substrates to products for a possible future large scale industrial production, a serie of variables was optimized, through Design of Experiments (DOE), using Response Surface Methodology (RSM).The investigated variables were: (1) enzyme concentration; (2) molar reason of substrates; (3) water/solvent rale; (4) temperature and (5) time. We obtained six distinct sugar esters: 5-0-lauroyl L-arabinose, 6-0-lauroyl D-glucose, 1'-O-lauroyl sucrose, 5-0-vinyladipoyl L-arabinose, 6-0-vinyladipoyl D-glucose and 1 '-O-vinyladipoyl sucrose, being lhe last three polymerizable. The progress of lhe reaction was monitored by HPLC analysis, through lhe decrease of sugar concentration in comparison to lhe blank. Qualitative analysis by TLC confirmed lhe formation of lhe products. In lhe purification step, two methodologies were adopted: (1) chromatographic column and (2) extraction with hot acetone. The acylation position and lhe chemical structure were determined by 13C-RMN. The polymerization of lhe three vinyl sugar esters was possible, through chemical catalysis, using H2O2 and K2S2O8 as initiators, at 60°C, for 24 hours. IR spectra of lhe monomers and respective polymers were compared revealing lhe disappearance of lhe vinyl group in lhe polymer spectra. The molar weights of lhe polymers were determined by GPC and presented lhe following results: poly (5-0-vinyladipoyl L-arabinose): Mw = 7.2 X 104; PD = 2.48; poly (6-0-vinyladipoyl D-glucose): Mw = 2.7 X 103; PD = 1.75 and poly (1'-O-vinyladipoyl sucrose): Mw = 4.2 X 104; PD = 6.57. The six sugar esters were submitted to superficial tension tests for determination of the critical micelle concentrations (CMC), which varied from 122 to 167 ppm. Finally, a study of applicability of these sugar esters, as lubricants for completion fluids of petroleum wells was' accomplished through comparative analysis of lhe efficiency of these sugar esters, in relation to three commercial lubricants. The products synthesized in this thesis presented equivalent or superior action to lhe tested commercial products

Pirólise térmica e catalítica de resíduos de vácuo gerados no refino de petróleo

In this study, was used a very promising technique called of pyrolysis, which can be used for obtaining products with higher added value. From oils and residues, since the contribution of heavier oils and residues has intensified to the world refining industry, due to the growing demand for fuel, for example, liquid hydrocarbons in the range of gasoline and diesel. The catalytic pyrolysis of vacuum residues was performed with the use of a mesoporous material belonging the M41S family, which was discovered in the early 90s by researchers Mobil Oil Corporation, allowing new perspectives in the field of catalysis. One of the most important members of this family is the MCM-41, which has a hexagonal arrangement of mesopores with pore diameters between 2 and 10 nm and a high specific surface area, making it very promising for use as a catalyst in petroleum refining for catalytic cracking, and their mesopores facilitate the access of large hydrocarbon molecules. The addition of aluminum in the structure of MCM-41 increases the acidity of the material, making it more positive for application in the petrochemical industry. The mesoporous material of the type Al-MCM41 (ratio Si / Al = 50) was synthesized by hydrothermal method starting from the silica gel, NaOH and distilled water added to the gel pseudobohemita synthesis. Driver was used as structural CTMABr. Removal of organic driver (CTMABr) was observed by TG / DTG and FTIR, but this material was characterized by XRD, which was observed the formation of the main peaks characteristic of mesoporous materials. The analysis of adsorption / desorption of nitrogen this material textural parameters were determined. The vacuum residues (VR's) that are products of the bottom of the vacuum distillation tower used in this study are different from oil fields (regions of Ceará and Rio de Janeiro). Previously characterized by various techniques such as FTIR, viscosity, density, SARA, elemental analysis and thermogravimetry, which was performed by thermal and catalytic degradation of vacuum residues. The effect of AlMCM-41 was satisfactory, since promoted a decrease in certain ranges of temperature required in the process of conversion of hydrocarbons, but also promoted a decrease in energy required in the process. Thus enabling lower costs related to energy expenditure from degradation during processing of the waste

Tratamento eletroquímico de efluente proveniente de caixas separadoras de água e óleo de postos revendedores de combustíveis

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior

Biologia alimentar e morfohistologia do tubo digestório do mussum, synbranchus marmoratus, bloch (osteichthyes: synbranchidae) no açude Marechal Dutra Gargalheiras , localizado no semi-árido brasileiro

Food habits and morpho-histology of the digestive tract of marbled swamp eel, Synbranchus marmoratus (Block, 1917) were investigated. The fish samples were captured during August, 2007 to July, 2008 in the Marechal Dutra reservoir, Acari, Rio Grande do Norte. The rain fall data was obtained from EMPARN. The fish captured, were measured, weighed, dissected, eviscerated and individual stomach weights were registered. The stomach contents analyses were carried out based on volumetric method, points, frequency of occurrence and applying the Index of Relative Importance. The degrees of repletion of the stomachs were determined besides the Index of Repletion relating to feeding activity variations and frequency of ingestion during the rainy and dry seasons. The rainfall varied from 0 mm a 335 mm with a mean value of 71.62 mm. Highest rainfall of 335.5 mm was registered in March, 2008 and August to December was the dry period. During the dry period the study species presented high degrees of repletion of the stomachs, with a peak value in the month of September (mean = 4.54; ± SD = 0.56). The minimum mean value of = 3.99 ± SD = 0.25 was registered in the month of May during the rainy period. The stomach contents of S. marmoratus registered show that this fish prefers animals, 78.22% of crustaceans 2.85% of mollusks, 3.25% of fish, 1.4% of insects and 13.5% of semi-digested organic matter, thus characterizing the study species as a carnivore with a preference for crustaceans. The morpho-histological aspects of the digestive tract of S. marmoratus indicate that the mouth is terminal adapted to open widely, thin lips with taste buds, small villiform teeth forming a single series on maxillas, four pairs of branchial arches with short and widely spaced branchial rays. The oesophagus is short and cylindrical with a small diameter. The oesophagus wall is thick with mucas surface and internal parallel folds. The stomach is retilinical in form, presenting cardiac, caecal and pyloric portions. The caecal portion is long and is intermediary in position between the cardiac and pyloric portions. The cardiac portion of the stomach is short and cylindrical formed of simple epithelial cylindrical mucus cells. The caecal portion is long with narrow walls, a big cavity and smaller folds which give rise to gastric glands. The phyloric portion has no glands and primary or secondary mucas folds. The morphohistological aspects of the digestive tract of S. marmoratus indicate its adaptation to a carnivorous feeding habit

Ecotoxicological assessment of sediments from the Santos and São Vicente estuarine system- Brazil

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)