Size limit and spontaneous emission factor for equilateral triangle semiconductor microlasers

The size of equilateral triangle resonator (ETR) needed for confining the fundamental mode is investigated by the total reflection condition of mode light rays and the FDTD numerical simulation. The confinement of the TM modes can be explained by the total reflection of mode light rays, and the confinement of the TE modes requires a larger ETR than the TM modes, which may be caused by excess scattering or radiation loss for the TE modes. With the multilayer staircase approximation, it is found that the spontaneous emission factor of the ETR lasers has the same form as that of strip waveguide lasers.

Photoluminescence and optical quenching of photoconductivity studies on undoped GaN grown by molecular beam epitaxy

Deep levels in undoped GaN materials grown by modified molecular beam epitaxy (MBE) are investigated by photoluminescence (PL) and optical quenching of photoconductivity measurements. A broad band which extends from 2.1 to 3.0 eV with a maximum at about 2.7 eV is observed, and four prominent quenching bands were found located at 2.18, 2.40, 2.71, and 2.78 eV above the valence band, respectively. These levels are attributed to four holes trap levels existence in the material. The defects cannot be firmly identified at present. (C) 2000 Elsevier Science B.V, All rights reserved.

processline: visualizing time-series data in process industry

In modern process industry, it is often difficult to analyze a manufacture process due to its umerous time-series data. Analysts wish to not only interpret the evolution of data over time in a working procedure, but also examine the changes in the whole production process through time. To meet such analytic requirements, we have developed ProcessLine, an interactive visualization tool for a large amount of time-series data in process industry. The data are displayed in a fisheye timeline. ProcessLine provides good overviews for the whole production process and details for the focused working procedure. A preliminary user study using beer industry production data has shown that the tool is effective.

使用Gantt图建立EPC工作流模型的研究

论文结合建筑工程项目的特点,讨论如何使用广义Gantt图建立基于EPC的工作流过程模型,旨在为建筑工程项目的工作流管理提供一个新的思路。

生物柴油转化效果测定方法的研究

生物柴油的生产原料、催化剂、工艺流程等存在多样化特点，为比较各种方法的优劣，需要建立一种适宜、通用的测定方法。通过分析国内外相关测定方法，提出以气相色谱测定反应产物，十七碳脂肪酸甲酯为标准物，内标法计算反应转化率和产率的方法。

子午岭地区植被演替过程中土壤养分及酶活性特征研究

选择植被自然恢复不同年限的阳坡梁坡地作为研究对象,采用时空互代法研究子午岭地区植被恢复过程中土壤养分和酶活性的变化。结果表明,植被恢复140 a内,不同土层土壤有机质含量、全氮含量、蔗糖酶活性、脲酶活性、碱性磷酸酶活性和过氧化氢酶活性增加,且表土层(0~20 cm)土壤养分含量和酶活性高于下层土壤(20~40 cm)。以裸露地为对照,土壤0~20 cm土层,有机质含量、全氮含量、蔗糖酶活性、脲酶活性、碱性磷酸酶活性和过氧化氢酶活性分别增加了23.8%~534.9%、9.3%~300.0%、213.6%~521.5%、40.4%~286.5%、22.7%~232.2%和3.2%~22.4%,土壤速效磷含量呈现波动变化,过氧化氢酶活性变化幅度比其他三种酶低。土壤有机质含量与全氮、速效磷含量密切相关;土壤蔗糖酶与土壤有机质、全氮均为极显著的相关关系(0.930/0.918);土壤脲酶活性与全氮含量相关系数最高(0.804);土壤碱性磷酸酶活性与有机质、全氮含量都呈极显著相关(0.977/0.984);土壤过氧化氢酶活性与全氮含量极显著相关,相关系数达0.996。