Effects of supplementation frequency on the ruminal fermentation and enteric methane production of beef cattle grazing in tropical pastures

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Intake, performance and estimated methane production of Nellore steers fed soybean grain

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Removal of total coliforms, thermotolerant coliforms, and helminth eggs in Swine production wastewater treated in anaerobic and aerobic reactors

The present work evaluated the performance of two treatment systems in reducing indicators of biological contamination in swine production wastewater. System I consisted of two upflow anaerobic sludge blanket (UASB) reactors, with 510 and 209 L in volume, being serially arranged. System II consisted of a UASB reactor, anaerobic filter, trickling filter, and decanter, being also organized in series, with volumes of 300, 190, 250, and 150 L, respectively. Hydraulic retention times (HRT) applied in the first UASB reactors were 40, 30, 20, and 11 h in systems I and II. The average removal efficiencies of total and thermotolerant coliforms in system I were 92.92% to 99.50% and 94.29% to 99.56%, respectively, and increased in system II to 99.45% to 99.91% and 99.52% to 99.93%, respectively. Average removal rates of helminth eggs in system I were 96.44% to 99.11%, reaching 100% as in system II. In reactor sludge, the counts of total and thermotolerant coliforms ranged between 10(5) and 10(9) MPN (100 mL)(-1), while helminth eggs ranged from 0.86 to 9.27 eggs g(-1) TS.

Profile of the production engineer student at a school of engineering in Brazil: academic and professional trajectories and tendencies

The objective of this paper is to introduce a study on the academic trajectory and professional profile of production engineers who graduated in a traditional and renowned Brazilian University (School of Engineering at Bauru – FEB). The study was conducted with the first three classes of undergraduates in the production engineering program at FEB/UNESP. A 50% response rate was obtained and with the data collected it was possible to characterize the professional profile of the students and outline their academic trajectory. According to the sample, the main result is that the curricular grid is the main criterion of similarity in student education, thus, the focus on program improvements should focus on the curricular grid. Tendencies are also pointed out to guide the search for improvements in the academic trajectory of production engineering students.

In vitro production of bovine embryos using Sigma antioxidant supplement®, α-tocopherol and L-ascorbic acid

This study tested the effect of Sigma antioxidant supplement®, α-tocopherol (vitamin E) and L-ascorbic acid (vitamin C) in the culture medium of bovine embryos. In experiment 1, in vitro produced bovine zygotes were cultured in Human Tubal Fluid (HTF): Eagle’s Basic Medium (BME) with: Group 1 – 50 µm vitamin C; Group 2 – 200 µm vitamin E; Group 3 – 25 µm vitamin C and 100 µm vitamin E; Group 4 – 1 µl/ml Sigma antioxidant supplement®; and the Control group – HTF:BME only. In experiment 2, embryos were cultured in high or low oxygen tension with HTF:BME + Sigma antioxidant supplement® or in HTF:BME alone (Control). The data were analyzed using ANOVA followed by Tukey’s test. The results of experiment 1 showed a negative effect (P < 0.05) of vitamin E on blastocyst production in Group 2 (19.7 ± 0.1%). This effect was reduced in Group 3 by the addition of vitamin C (26.1 ± 0.2%). The use of vitamin C alone (34.9 ± 0.3%) or the Sigma antioxidant supplement® (33.3 ± 0.7%) did not increase (P > 0.05) the number of blastocysts produced compared with the control group (30.1 ± 0.5%). During experiment 2, there was no effect (P > 0.05) from the culture medium or the O2 concentrations used, indicating that the reduction of the O2 concentration did not improve blastocyst production.

Can hydrogen peroxide and quercetin improve production of Eucalyptus grandis x Eucalyptus urophylla?

Vegetative propagation is considered the best choice for the rapid multiplication of plant species, however, rooting may still present difficulties. Substances, such as auxins, phenolic compounds and hydrogen peroxide, are recognized as able to improve this process. The aim of the present work was to determine if hydrogen peroxide in combination with quercetin or indole butyric acid, can modify some characteristics related to rooting and development in cuttings of Eucalyptus grandis x Eucalyptus urophylla. Cuttings were periodically evaluated at 30, 60 and 90 days according to the following criteria: height, diameter and survival percentage. After planting (90 days), a destructive evaluation was performed to determine rooting percentage, average size and number of roots. Polyamines content and polyamine oxidase activity, as biochemical markers of plant development, were determined. No statistically significant differences in height, diameter, survival and rooting percentage, root length and number of roots per cuttings were found. Treatments induced a decrease in putrescine levels and polyamine oxidase activity in roots. For absence of positive responses, the use of these substances as a treatment to improve cutting production is economically unviable.

Carbohydrates, growth and production of -roxo de valinhos- fig tree in initial development under irrigation management

The carbohydrates translocation and consequently growth and production of fig tree (Ficuscarica L.) vary according to the different management on cultivation conditions. The aim of this study was to evaluate the changes in the levels and total carbohydrates accumulation together with growth and “Roxo de Valinhos” fig trees production onimplementation of orchards in initial phase, cultivated with and without irrigation. We adopted a factorial arrangement (2 x 7) with four repetitions distributed in installments (with and without irrigation) subdivided in time (collect time). Destructive analyzes were performed at 40, 80, 120, 160, 200, 240 and 280 days after pruning (DAP) and are measured: stem diameter and branch, stem length and branch, number of leaves, internodes and fruit. Subsequently, the plant parts were sectioned to obtain the leaf area, length and roots volume, fresh and dry matter weight. The number, weight and total productivity of fruits were evaluated. The media of all growth attributes and production characteristics were higher in treatments with water irrigation. The total carbohydrate content was higher at 120 and 160 DAP and the carbohydrates accumulation was increasing for most institutions over the plants development, except for the leaves that showed a decrease in the levels at 160 DAP. The fruits showed greater carbohydrates accumulation in relation to the other evaluated organs.

Production of alcoholic beverage from ginger: study of fermentation process and final product quality

Introduction: In Brazil part of the production of ginger is of inadequate quality for export. The production of spirit from felt-over rhizomes is an alternative of great interest to producers of these rhizomes. Aim: Aiming to increase the value of felt-over rhizomes, this work aimed to study the use of ginger as a raw material for alcoholic beverage production. It was evaluated the effect of fermentation conditions on the components of fermented alcoholic, as well as, the quality of alcoholic distilled beverage of ginger. Methods: Dehydrated ginger passed by enzymatic hydrolysis-saccharification processes. The hydrolysate obtained was analyzed for sugar profile in HPLC. The alcoholic fermentation process followed the central composite rotational design for three factors: fermentation temperature (23 to 37ºC), time of fermentation (17 to 33 h) and concentration of inoculum (0.22 to 3.00%). The fermented alcoholic obtained was analyzed in HPLC for the contents of ethanol, methanol, glycerol and residual sugars. The distillated alcoholic beverage of ginger was analyzed for ethanol, methanol, acetaldehyde, ethyl acetate and higher alcohols in the gas chromatography (GC). In addition, copper content and acidity were analyzed Results: Sugar profile of the ginger hydrolysate revealed the presence of 77.8% of glucose. Data analysis of fermentation process showed influence of temperature on ethanol and methanol content of the fermented alcoholic of ginger. Time of fermentation had effect on glycerol content. All parameters of process had influence on residual sugars contents. The HPLC analysis has shown presence of methanol, ethyl acetate, aldehyde, acids, higher alcohols and esters in distilled alcoholic beverage of ginger. Conclusion: Fermented alcoholic of ginger with higher levels of ethanol can be obtained under the conditions of 1.5% w/w of inoculum, 30°C of temperature and 24 hours of fermentation time. In this condition of fermentation process the beverage of ginger had good quality.

Production, characterization and structural analysis of proteins from Corynebacterium pseudotuberculosis and snake venoms

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Estuarine and oceanic influences on copepod abundance and production of a subtropical coastal area

We investigated the influence of nutrient-rich oceanic waters in comparison to the estuarine outflow from Santos Bay (SE Brazil) on copepod abundance and production on the adjacent inner shelf. Zooplankton samples were collected with a Multinet in spring 2005 and in summer 2006. Copepod biomass was derived from length-weight regressions, and growth rates were estimated from empirical models. Altogether, 58 copepod taxa were identified. The highest abundances were due to small-sized organisms including nauplii, oncaeids and copepodids of paracalanids and clausocalanids. Biomass and secondary production mirrored copepod abundance, with Temora copepodids accompanying the above-mentioned taxa as major contributors. The contribution of naupliar biomass and production was low (2.2 and 3.8% of the total, respectively). The influence of the Santos Bay outflow was observed only in spring, when Coastal Water (CW) dominated at the study site; whereas in summer the inner shelf was occupied by CW in the surface layer and the oceanic South Atlantic Central Water (SACW) in the bottom layer. The SACW intrusion had more of an influence for the increase in copepod production than the Santos Bay plume. The distribution and dynamics of the oceanic water masses seemed to be the most important influence on copepod diversity and production at this subtropical site.

Influence of HLA-DRB-1 alleles on the production of antibody against CSP, MSP-1, AMA-1, and DBP in Brazilian individuals naturally infected with Plasmodium vivax

We evaluated the influence of allelic frequency of the human leukocyte antigen (HLA) -DRB1 on the acquisition of antibody response against malaria sporozoite and merozoite peptides in patients with Plasmodium vivax malaria acquired in endemic areas of Brazil. IgG antibodies were detected by enzyme-linked immunosorbent assay against four peptides of circumsporozoite protein (CSP) (amino, carboxyl, and VK210 and VK247 repeats) and peptides of merozoite surface protein 1 (MSP-1), apical membrane antigen 1 (AMA-1), and Duffy-binding protein (DBP). We found an association between HLA-DR3 and HLA-DR5 alleles and lack of antibody response to CSP amino terminal, as well as an association between HILA-DR3 and the highest antibody response to MSP1 (Pv200L). In conclusion, we suggest a potential regulatory role of the H1A-DRB1 alleles in the production of antibodies to a conserved region of P. vivax CSP and MSP1 in Brazilian population exposed to malaria. (C) 2011 Elsevier B.V. All rights reserved.

Internal fit of two all-ceramic systems and metal-ceramic crowns

Objectives: The aim of this study was to investigate the internal fit (IF) of glass-infiltrated alumina (ICA - In-Ceram Alumina), yttria-stabilized tetragonal zirconia polycrystals (Y-TZP - IPS e.max ZirCAD), and metal-ceramic (MC - Ni-Cr alloy) crowns. Material and Methods: Sixty standardized resin-tooth replicas of a maxillary first molar were produced for crown placement and divided into 3 groups (n=20 each) according to the core material used (metal, ICA or Y-TZP). The IF of the crowns was measured using the replica technique, which employs a light body polyvinyl siloxane impression material to simulate the cement layer thickness. The data were analyzed according to the surfaces obtained for the occlusal space (OS), axial space (AS) and total mean (TM) using two-way ANOVA with Tukey's multiple comparison test (p<0.05). Results: No differences among the different areas were detected in the MC group. For the Y-TZP and ICA groups, AS was statistically lower than both OS and TM. No differences in AS were observed among the groups. However, OS and TM showed significantly higher values for ICA and Y-TZP groups than MC group. Comparisons of ICA and Y-TZP revealed that OS was significantly lower for Y-TZP group, whereas no differences were observed for TM. Conclusions: The total mean achieved by all groups was within the range of clinical acceptability. However, the metal-ceramic group demonstrated significantly lower values than the all-ceramic groups, especially in OS.

Molecular characterization by amplified fragment length polymorphism and aflatoxin production of Aspergillus flavus isolated from freshly harvested peanut in Brazil

Brazil contributes substantially to the global peanut production, and the state of Sao Paulo is the largest producer in the country. Peanut crops can be contaminated by Aspergillus flavus strains producing aflatoxins, which are highly toxic and carcinogenic. Thus, the production of high-quality peanuts is crucial both for the commercial peanut industry and as a matter of public health. In this study, we used amplified fragment length polymorphism analysis (AFLP) to investigate the genetic variability among A. flavus strains isolated from fresh peanuts harvested in four different regions in the state of Sao Paulo, and to determine whether the molecular genetic profiles correlated with aflatoxin production or sclerotia formation. AFLP analysis generated 78 fragments ranging from 27 to 365 base pairs in length. Thirteen percent were not polymorphic. Genotyping identified twelve groups of A. flavus. On the basis of the polymorphisms identified, similarity between the isolates ranged from 37% to 100%. Of all isolates collected, 91.7% produced aflatoxins and 83.9% produced small sclerotia. Statistical analysis failed to suggest any relationship between the presence of sclerotia and mean levels of aflatoxins B-1 and B-2. Furthermore, a dendrogram based on AFLP data revealed substantial genetic variability among the A. flavus strains, but showed no correlation between dendrogram groups separated by molecular genetic features and production of aflatoxins B-1 or B-2 or the formation of sclerotia.

Use of cellulose fibers from hemp core in fiber-cement production. Effect on flocculation, retention, drainage and product properties

The aim of this paper is to study the feasibility of using cellulose fibers obtained from an agricultural waste, hemp core (Cannabis Sativa L), through different new environmental friendly cooking processes for fiber-cement production. The physical and mechanical properties of the fiber reinforced concrete, which depend on the nature and morphology of the fibers, matrix properties and the interactions between them, must be kept between the limits required for its application. Therefore, the morphology of the fibers and how its use affects the flocculation, retention and drainage processes in the fiber-cement manufacture, and the mechanical and physical properties of the fiber-cement product have been studied. The use of pulp obtained by means of the hemp core cooking in ethanolamine at 60% concentration at 180 degrees C during 90 min resulted in the highest solids retention and the best mechanical properties among the studied hemp core pulps. (C) 2012 Elsevier B.V. All rights reserved.

The production of critical-reflexive narratives and their effect on nursing students' portfolios

The objective of this study is to analyze the process of producing reflexive narratives on nursing students' portfolios. This qualitative study performed an analysis of the portfolios of the class discipline Health Promotion in Primary Education, taught in the fourth semester of the Nursing Licensure Course. Results showed an initial predominance of descriptive records, with the incipient approach of theoretical aspects associated with the aspects regarding their experience. Further, in the group and experience discussions, there were narratives containing more critical and reflexive elements, with justifications for the described actions and the relationships with the theoretical-practical aspects studied in the class and in the course. In conclusion, there is a process of producing critical-reflexive narratives in portfolios that could include a summarized description, using common sense and idealization which allows for including the differences and the theoretical review.