The Influence of Age and Sex on Genetic Associations with Adult Body Size and Shape: A Large-Scale Genome-Wide Interaction Study.

Genome-wide association studies (GWAS) have identified more than 100 genetic variants contributing to BMI, a measure of body size, or waist-to-hip ratio (adjusted for BMI, WHRadjBMI), a measure of body shape. Body size and shape change as people grow older and these changes differ substantially between men and women. To systematically screen for age- and/or sex-specific effects of genetic variants on BMI and WHRadjBMI, we performed meta-analyses of 114 studies (up to 320,485 individuals of European descent) with genome-wide chip and/or Metabochip data by the Genetic Investigation of Anthropometric Traits (GIANT) Consortium. Each study tested the association of up to ~2.8M SNPs with BMI and WHRadjBMI in four strata (men ≤50y, men >50y, women ≤50y, women >50y) and summary statistics were combined in stratum-specific meta-analyses. We then screened for variants that showed age-specific effects (G x AGE), sex-specific effects (G x SEX) or age-specific effects that differed between men and women (G x AGE x SEX). For BMI, we identified 15 loci (11 previously established for main effects, four novel) that showed significant (FDR<5%) age-specific effects, of which 11 had larger effects in younger (<50y) than in older adults (≥50y). No sex-dependent effects were identified for BMI. For WHRadjBMI, we identified 44 loci (27 previously established for main effects, 17 novel) with sex-specific effects, of which 28 showed larger effects in women than in men, five showed larger effects in men than in women, and 11 showed opposite effects between sexes. No age-dependent effects were identified for WHRadjBMI. This is the first genome-wide interaction meta-analysis to report convincing evidence of age-dependent genetic effects on BMI. In addition, we confirm the sex-specificity of genetic effects on WHRadjBMI. These results may provide further insights into the biology that underlies weight change with age or the sexually dimorphism of body shape.

On the Analysis and Control of a Linear Synchronous Servomotor with a Flexible Load

Industry's growing need for higher productivity is placing new demands on mechanisms connected with electrical motors, because these can easily lead to vibration problems due to fast dynamics. Furthermore, the nonlinear effects caused by a motor frequently reduce servo stability, which diminishes the controller's ability to predict and maintain speed. Hence, the flexibility of a mechanism and its control has become an important area of research. The basic approach in control system engineering is to assume that the mechanism connected to a motor is rigid, so that vibrations in the tool mechanism, reel, gripper or any apparatus connected to the motor are not taken into account. This might reduce the ability of the machine system to carry out its assignment and shorten the lifetime of the equipment. Nonetheless, it is usually more important to know how the mechanism, or in other words the load on the motor, behaves. A nonlinear load control method for a permanent magnet linear synchronous motor is developed and implemented in the thesis. The purpose of the controller is to track a flexible load to the desired velocity reference as fast as possible and without awkward oscillations. The control method is based on an adaptive backstepping algorithm with its stability ensured by the Lyapunov stability theorem. As a reference controller for the backstepping method, a hybrid neural controller is introduced in which the linear motor itself is controlled by a conventional PI velocity controller and the vibration of the associated flexible mechanism is suppressed from an outer control loop using a compensation signal from a multilayer perceptron network. To avoid the local minimum problem entailed in neural networks, the initial weights are searched for offline by means of a differential evolution algorithm. The states of a mechanical system for controllers are estimated using the Kalman filter. The theoretical results obtained from the control design are validated with the lumped mass model for a mechanism. Generalization of the mechanism allows the methods derived here to be widely implemented in machine automation. The control algorithms are first designed in a specially introduced nonlinear simulation model and then implemented in the physical linear motor using a DSP (Digital Signal Processor) application. The measurements prove that both controllers are capable of suppressing vibration, but that the backstepping method is superior to others due to its accuracy of response and stability properties.

Método para a correção da distorção de imagens obtidas por videofluoroscopia

OBJETIVO: Operacionalizar um protocolo para a correção de imagens obtidas por videofluoroscopia a partir de um modelo matemático descrito por Baltzopoulos (1995) e avaliar a magnitude do erro pelos métodos de calibração linear e não linear. MATERIAIS E MÉTODOS: As imagens foram obtidas por meio de um videofluoroscópio da marca Axion Siemens Iconos R100 de um indivíduo realizando exercício de extensão de joelho. Para a correção das imagens foi utilizado padrão de calibração não-linear. O processamento dos dados foi realizado em placa de captura da marca Silicon Graphics 320 e posteriormente analisado em um "software" Matlab. RESULTADOS: Para demonstrar a aplicabilidade do método foi avaliada a deformação do ligamento patelar. A utilização do padrão de calibração linear produziu um erro máximo de 0,086 mm, enquanto o padrão de calibração não linear atingiu um valor máximo de 0,019 mm. Já com relação ao erro médio, a calibração linear atingiu o valor de 0,024 mm, e a não linear apresentou um valor de 0,007 mm. CONCLUSÃO: Os resultados evidenciam a necessidade de utilização de um procedimento de calibração não linear.

Tomografia computadorizada da coluna lombar após artrodese com emprego de material metálico: avaliação da qualidade da imagem para diferentes algoritmos matemáticos

OBJETIVO: Selecionar os melhores algoritmos para o exame de coluna lombar na avaliação de artrodese com material metálico. MATERIAIS E MÉTODOS: Utilizou-se um equipamento de tomografia computadorizada de 16 fileiras de detectores. Imagens de dez pacientes foram reconstruídas com filtros 20, 40, 60 e 80 e realizadas reformatações em três dimensões e multiplanares com espessuras de 2 mm e 4 mm. Um total de 320 imagens foi avaliado por três experientes radiologistas, que deram notas de 1 a 5 (1 = não-aceitável; 2 = abaixo dos padrões; 3 = aceitável; 4 = acima da média; 5 = excelente). Além disso, foram realizadas medidas de ruído para correlação com o tipo de filtro utilizado. RESULTADOS: As médias do valor de ruído para reconstrução com 2 mm e filtros 20, 40, 60 e 80 foram de 24,7 ± 4,3; 35,5 ± 4,2; 106,0 ± 18,5 e 145,9 ± 26,9, respectivamente, e para 4 mm foram de 18,1 ± 2,4; 25,1 ± 4,6; 76,7 ± 17,2 e 106,6 ± 23,4. CONCLUSÃO: As imagens coloridas em três dimensões são mais bem visualizadas com filtro 20, entretanto, nas imagens em tons de cinza um filtro intermediário de 40 ou 60 pode ser útil para demonstrar os parafusos com maior detalhe. Para reconstruções multiplanares com espessura de 2 mm o filtro 40 é mais bem aceito, e para uma espessura de 4 mm um filtro 60 apresentou melhor qualidade.

Pilas de combustible de una sola camara, basadas en electrolitos de ceria dopada con gadolinia y operadas con metano y propano

La principal ventaja de las pilas de combustible de óxido sólido (SOFCs) de una sola cámara, frente a las bicamerales convencionales, es que permiten simplificar el diseño del dispositivo y operar con mezclas de hidrocarburos (metano, propano...) y aire, sin necesidad de separar ambos gases, por medio del uso de electrodos selectivos a la oxidación del combustible y reducción del oxidante. En el presente trabajo, se han fabricado monopilas soportadas sobre electrolitos de ceria dopada con gadolinia (GDC), de 200 ¿m de espesor, usando Ni-GDC como ánodo y LSC(La0.5Sr0.5CoO3-¿)-GDC-Ag2O como cátodo. Las propiedades eléctricas de la celda se determinaron en un reactor de una sola cámara, usando mezclas de metano + aire y propano + aire. Se investigó la influencia de la temperatura, de las presiones parciales del combustible y oxígeno, y de la velocidad de flujo total sobre el rendimiento de las pilas preparadas. Así, la densidad de potencia se incrementó fuertemente con el aumento de la temperatura, la velocidad de flujo total y la composición de hidrocarburo. Una vez se optimizaron los parámetros operacionales, la celda presentó unas densidades de potencia máximas de 70 y 320 mW/ cm2, operando con propano a 600ºC y con metano a 795ºC, respectivamente.

Experimental enhancement of corticosterone levels positively affects subsequent male survival.

Corticosterone is an important hormone of the stress response that regulates physiological processes and modifies animal behavior. While it positively acts on locomotor activity, it may negatively affect reproduction and social activity. This suggests that corticosterone may promote behaviors that increase survival at the cost of reproduction. In this study, we experimentally investigate the link between corticosterone levels and survival in adult common lizards (Lacerta vivipara) by comparing corticosterone-treated with placebo-treated lizards. We experimentally show that corticosterone enhances energy expenditure, daily activity, food intake, and it modifies the behavioral time budget. Enhanced appetite of corticosterone-treated individuals compensated for increased energy expenditure and corticosterone-treated males showed increased survival. This suggests that corticosterone may promote behaviors that reduce stress and it shows that corticosterone per se does not reduce but directly or indirectly increases longer-term survival. This suggests that the production of corticosterone as a response to a stressor may be an adaptive mechanism that even controls survival.

Safety and immunogenicity of a chimpanzee adenovirus-vectored Ebola vaccine in healthy adults: a randomised, double-blind, placebo-controlled, dose-finding, phase 1/2a study.

BACKGROUND: The ongoing Ebola outbreak led to accelerated efforts to test vaccine candidates. On the basis of a request by WHO, we aimed to assess the safety and immunogenicity of the monovalent, recombinant, chimpanzee adenovirus type-3 vector-based Ebola Zaire vaccine (ChAd3-EBO-Z). METHODS: We did this randomised, double-blind, placebo-controlled, dose-finding, phase 1/2a trial at the Centre Hospitalier Universitaire Vaudois, Lausanne, Switzerland. Participants (aged 18-65 years) were randomly assigned (2:2:1), via two computer-generated randomisation lists for individuals potentially deployed in endemic areas and those not deployed, to receive a single intramuscular dose of high-dose vaccine (5 × 10(10) viral particles), low-dose vaccine (2·5 × 10(10) viral particles), or placebo. Deployed participants were allocated to only the vaccine groups. Group allocation was concealed from non-deployed participants, investigators, and outcome assessors. The safety evaluation was not masked for potentially deployed participants, who were therefore not included in the safety analysis for comparison between the vaccine doses and placebo, but were pooled with the non-deployed group to compare immunogenicity. The main objectives were safety and immunogenicity of ChAd3-EBO-Z. We did analysis by intention to treat. This trial is registered with ClinicalTrials.gov, number NCT02289027. FINDINGS: Between Oct 24, 2014, and June 22, 2015, we randomly assigned 120 participants, of whom 18 (15%) were potentially deployed and 102 (85%) were non-deployed, to receive high-dose vaccine (n=49), low-dose vaccine (n=51), or placebo (n=20). Participants were followed up for 6 months. No vaccine-related serious adverse events were reported. We recorded local adverse events in 30 (75%) of 40 participants in the high-dose group, 33 (79%) of 42 participants in the low-dose group, and five (25%) of 20 participants in the placebo group. Fatigue or malaise was the most common systemic adverse event, reported in 25 (62%) participants in the high-dose group, 25 (60%) participants in the low-dose group, and five (25%) participants in the placebo group, followed by headache, reported in 23 (57%), 25 (60%), and three (15%) participants, respectively. Fever occurred 24 h after injection in 12 (30%) participants in the high-dose group and 11 (26%) participants in the low-dose group versus one (5%) participant in the placebo group. Geometric mean concentrations of IgG antibodies against Ebola glycoprotein peaked on day 28 at 51 μg/mL (95% CI 41·1-63·3) in the high-dose group, 44·9 μg/mL (25·8-56·3) in the low-dose group, and 5·2 μg/mL (3·5-7·6) in the placebo group, with respective response rates of 96% (95% CI 85·7-99·5), 96% (86·5-99·5), and 5% (0·1-24·9). Geometric mean concentrations decreased by day 180 to 25·5 μg/mL (95% CI 20·6-31·5) in the high-dose group, 22·1 μg/mL (19·3-28·6) in the low-dose group, and 3·2 μg/mL (2·4-4·9) in the placebo group. 28 (57%) participants given high-dose vaccine and 31 (61%) participants given low-dose vaccine developed glycoprotein-specific CD4 cell responses, and 33 (67%) and 35 (69%), respectively, developed CD8 responses. INTERPRETATION: ChAd3-EBO-Z was safe and well tolerated, although mild to moderate systemic adverse events were common. A single dose was immunogenic in almost all vaccine recipients. Antibody responses were still significantly present at 6 months. There was no significant difference between doses for safety and immunogenicity outcomes. This acceptable safety profile provides a reliable basis to proceed with phase 2 and phase 3 efficacy trials in Africa. FUNDING: Swiss State Secretariat for Education, Research and Innovation (SERI), through the EU Horizon 2020 Research and Innovation Programme.

Lex naturalis est indispensabile

Invocatio: I.N.J.

Bioconcentração e biomagnificação de metilmercúrio na baía de Guanabara, Rio de Janeiro

Methylmercury was determined in water and aquatic biota from Guanabara Bay. Trophic transfer of methylmercury was observed between trophic levels from prey (microplankton, mesoplankton and fish with different feeding habits) to top predator (pelagic demersal fish). Top predator fish presented the highest methylmercury concentrations (320.3 ± 150.7 mg kg-1 dry wt.), whereas microplankton presented the lowest (8.9 ± 3.3 mg kg-1 dry wt.). The successive amplification of methylmercury concentrations and its bioconcentration factor with increasing trophic levels from base to top indicate that biomagnification may be occurring along the food web. Results suggest the importance of feeding habits and trophic level in the bioaccumulation of methylmercury by aquatic biota.

Identificação de marcadores RAPD ligados a um gene de resistência ao cancro da haste da soja

O cancro da haste da soja (Glycine max) é uma importante doença causada pelo fungo Diaporthe phaseolorum f. sp. meridionalis/Phomopsis phaseoli f. sp. meridionalis. Visando identificar marcadores RAPD associados a genes de resistência ao cancro da haste, causado pelo isolado CH8, presentes na linhagem UFV 91-61, foi realizado, inicialmente, um estudo sobre a herança da resistência, por meio do cruzamento desta linhagem com a variedade suscetível Paranaíba. Os resultados indicaram que um gene dominante controla a resistência a este isolado. Através de análises com marcadores moleculares na população F2 foram identificados dois marcadores RAPD produzidos pela amplificação do primer OPAB19. Os dois fragmentos de DNA de aproximadamente 1.150 e 1.320 pb produzidos por este primer estão ligadas em fases de repulsão e acoplamento, respectivamente, a uma distância de 4,7 cM do gene de resistência da linhagem UFV 91-61. Estes marcadores poderão ser usados para monitorar a introgressão deste gene em cultivares de soja adaptados e abre a possibilidade de uma sistemática procura de marcadores ligados a outros genes de resistência para o cancro da haste da soja, os quais poderiam ser posteriormente piramidados num único background genético.