Human pulp response to resin cements used to bond inlay restorations

Objective. The aim of this study was to evaluate the pulp response following cementation of inlays using two different resin cements.Methods. Deep Class V cavities were prepared on the buccal surface of 34 sound human premolars. impressions were taken and inlays were prepared which were cemented with the following luting materials-Group 1: Rely X(TM) Unicem. (3M ESPE); Group 2: Variolink(R) II (Ivoclar Vivadent). in Group 3 (control), after lining the cavity floor with Dycal(R) (Dentsply Caulk) the inlays were cemented with Rely X(TM) Unicem. Four additional teeth were used as an intact control group. For Variolink(R) II, the adhesive system Excite was used as part of the cementation procedure. After 7 or 60 days, the teeth were extracted and processed for histological assessment.Results. At 7 days, Rely X(TM) Unicern and Variolink(R) II system triggered in two samples a mild and moderate inflammatory response, respectively. At 60 days, the pulpal response decreased for both groups. A discrete persistent inflammatory response occurred in Group 2 in which displacement of resin components across the dentin tubules was observed. In the control group, normal histological characteristics were observed. The inflammatory response and tissue disorganization were related to the remaining dentin thickness between the cavity floor and the pulp tissue.Significance. Techniques for inlay cementation using distinct luting cements may cause specific pulpal damage. Variolink(R) II associated with the adhesive system Excite cause more aggressive effects to the pulp-dentin complex than Rely X(TM) Unicern cement when both are used to cement inlay restorations. (C) 2005 Academy of Dental Materials. Published by Elsevier Ltd. All rights reserved.

Short-term induction of thrombocytopenia delays periodontal healing in rats with periodontal disease: participation of endostatin and vascular endothelial growth factor

Background and Objective:Platelets contain factors, including VEGF and endostatin, that can modulate the healing process. We evaluated the effects of severe thrombocytopenia on periodontal healing in rats and determined the contribution of VEGF and endostatin to the healing process.Material and Methods:Rats were distributed into three test groups and two control groups. Cotton ligatures were placed at the gingival margin level of the lower first molar in the test groups. Sham-operated rats and rats in one of the periodontitis groups were killed 15 days later. Rats in the remaining two periodontitis groups had the ligatures removed in order to study the spontaneous recovery from the periodontal disease 15 days later, and these rats were treated with rabbit antiplatelet serum, in order to induce thrombocytopenia, or normal rabbit serum. An additional group without ligatures received antiplatet serum in the same period.Results:After ligature removal, rats treated with normal rabbit serum showed reduced myeloperoxidase activity, decreased alveolar bone loss and increased numbers of blood vessels. Thrombocytopenia caused a delay in alveolar bone regeneration, a decrease in the number of vessels and a modest decrease in myeloperoxidase activity. In the rats with periodontitis, serum endostatin concentrations were slightly decreased and serum VEGF remained unchanged compared with sham-operated animals. After ligature removal, a significant VEGF increase and endostatin decrease were observed in the rats treated with normal rabbit serum. Thrombocytopenia led to a dramatic fall in both VEGF and endostatin concentrations.Conclusion:Thrombocytopenia leads to a delay of periodontal healing in the situation of experimental periodontitis, which might be mediated in part by a decrease in the serum concentration of VEGF and endostatin derived from the platelets. However, other factors derived from the platelets may also have contributed to a delay of periodontal healing in the rats with thrombocytopenia.

Comparative Histopathological Analysis of Human Pulps after Class I Cavity Preparation with a High-Speed Air-Turbine Handpiece or Er:YAG Laser

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Effect of microwave disinfection on the hardness and adhesion of two resilient liners

Statement of problem. Microwave irradiation has been suggested for denture disinfection. However, the effect of this procedure on the hardness and bond strength between resilient liners and denture base acrylic resin is not known.Purpose. This study evaluated the effect of water storage time and microwave disinfection on the hardness and peel bond strength of 2 silicone resilient lining materials to a heat-polymerized acrylic resin.Material and methods. Acrylic resin (Lucitone 199) specimens (75 X 10 X 3 mm) were stored in water at 37 degrees C (2 or 30 days) before bonding (n = 160). The resilient lining materials (GC Reline Extra Soft and Dentusil) were bonded to the denture base and divided into the following 4 groups (n = 10): Tests performed immediately after bonding (control); specimens immersed in water (200 mL) and irradiated twice, with 650 W for 6 minutes; specimens irradiated daily for 7 total cycles of disinfection; specimens immersed in water (37 degrees C) for 7 days. Specimens were submitted to a 180-degree peel test (at a crosshead speed of 10 mm/min) and the failure values (MPa) and mode of failure were recorded. Pretreatment and posttreatment hardness measurements (Shore A) of the resilient materials were also performed. Three-way analysis of variance, followed by the Tukey HSD test, was performed (alpha=.05).Results. The analysis revealed that, for all conditions, the mean failure strengths of GC Reline Extra Soft (0.95-1.19 MPa) were significantly higher (P<.001) than those of Dentusil (0.45-0.50 MPa). The adhesion of the liners was not adversely affected by water storage time of Lucitone 199 or microwave disinfection. All peel test failures were cohesive. There was a small but significant difference (P<.001) between the pretreatment (34.33 Shore A) and posttreatment (38.69 Shore A) hardness measurements.Conclusion. Microwave disinfection did not compromise the hardness of either resilient liners or their adhesion to the denture base resin Lucitone 199.

Fixation of autogenous bone grafts with ethyl-cyanoacrylate glue or titanium screws in the calvaria of rabbits

This study compared the fixation of autogenous onlay bone grafts with cyanoacrylate glue (Super Bonder) and with titanium screws. Twenty rabbits underwent bilateral parietal ostectomies. Bone segments were fixed anteriorly to the resulting bone defect. In group I, the grafts were fixed with 4 min long, 1.5 mm diameter screws; in group II, adhesive was used. The animals were killed after 5, 15, 30, 60 and 120 days. Histomorphometric analysis was used to quantify the maintenance of the graft area. Discrete areas of inflammatory reaction were seen in both groups after 5 days and for group II after 15 days. After 30 days, new bone formation was seen at the interface of the grafts. After 120 days, the graft was incorporated into the host bed in group I and partially incorporated in group II. There was a significant statistical difference regarding the mean graft areas between 15 and 120 days (p < 0.001) and between fixation methods (p < 0.002). Fixation with adhesive promoted a significantly greater area of bone graft than screw fixation, independent of time period. The adhesive was biocompatible, presented similar stability to the screw and maintained the bone area, although there was a delay in graft incorporation.

Direct pulp capping with a self-etching adhesive system: Histopathologic evaluation in dogs' teeth

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Physicochemical properties of endodontic sealers of different bases

Objective: To assess the setting time (ST), flow (FL), radiopacity (RD), solubility (SB) and dimensional change following setting (DC) of different sealers (AH Plus (R), Polifil, Apexit Plus (R), Sealapex (R), Endomethasone (R) and Endofill (R)) according to American National Standards Institute/American Dental Association (ANSI/ADA) Specification 57. Material and methods: Five samples of each material were used for each test. For ST, cast rings were filled with sealers and tested with a Gillmore needle. For FL, the sealer was placed on a glass plate. After 180 s, another plate with 20 g and a load of 100 g were applied on the material, and the diameters of the discs formed were measured. In RD, circular molds were filled with the sealers, radiographed and analyzed using Digora software. For SB, circular molds were filled with the sealers, a nylon thread was placed inside the material and another glass plate was positioned on the set, pressed and stored at 37 degrees C. Samples were weighed, placed in water, dried and reweighed. The water used for SB was analyzed by atomic absorption spectrometry. For DC, circular molds were filled with the sealers, covered by glass plates and stored at 37 degrees C. Samples were measured and stored in water for 30 days. After this period, they were dryed and measured again. Results: Regarding ST, AH Plus (R), Apexit (R) and Endofil (R) sealers are in accordance with ANSI/ADA standards. Endomethasone's manufacturer did not mention the ST; Polifil is an experimental sealer and Sealapex (R) did not set. Considering RD, SB and DC, all sealers were in accordance with ANSI/ADA. The spectrometric analysis showed that a significant amount of K+ and Zn2(+) ions was released from Apexit Plus (R) and Endofill (R), respectively. Conclusion: Except for DC, all other physicochemical properties of the tested sealers conformed to ANSI/ADA requirements.

Morphological changes on the hard palatine mucosa of rats (Rattus norvegicus albinus) after chronic alcohol consumption

In order to examine the effects of alcohol on the hard palatine mucosa of rats, sixty adult female rats (Rattus norvegicus albinus) were divided into two experimental groups. The control group received solid diet (Purina rat chow) and tap water ad libitum. The alcoholic group received the same solid diet and was allowed to drink only sugar cane brandy dissolved in 30% Gay Lussac (v/v). At the end of periods of 90, 180 and 270 days of treatment, the animals at estro were sacrificed and the hard palatine mucosa were prepared for TEM and SEM methods. The basal cells of the alcoholic groups (90, 180 and 270 days of treatment) demonstrated some alterations: the intercellular spaces between these cells were higher, presented cytoplasmatic lipid droplets and autolysis. Also, the connective tissue showed intense lipid droplets accumulation in the alcoholic groups. These modifications suggested that chronic alcohol ingestion was able to modify the integrity of the cells in the rat hard palatine mucosa.

Influence of Superovulatory Protocols on In Vitro Production of Nellore (Bos indicus) Embryos

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Quantitative expression of myogenic regulatory factors MyoD and myogenin in pacu (Piaractus mesopotamicus) skeletal muscle during growth

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Anthelmintic resistance in cattle nematodes in northwestern São Paulo state, Brazil

The present study was carried out in the northwestern region of São Paulo State, Brazil, to determine the anthelmintic resistance status in cattle naturally infected with gastrointestinal nematodes. The anthelmintics tested were levamisole phosphate (Ripercol (R), Fort Dodge), albendazole sulphoxide (Ricobendazole, Fort Dodge), ivermectin (Ivomec (R), Merial) and moxidectin (Cydectin (R), Fort Dodge), administered at the doses recommended by the manufacturers. From April 2002 to May 2004, 25 cattle farms were evaluated. on each farm, steers were divided into treatment and control (not treated) groups based on fecal egg counts (FEC). Between 7 and 10 days after the anthelmintics administration, fecal samples were collected from each animal for post-treatment FEC. Fecal cultures from each group were also prepared for larval identification. After treatment, mean FEC reduction (FECR) in treatment groups (compared with control groups) was assessed on each farm. FECR was lower than 90% on 23 farms after ivermectin treatment. on 19 farms, FECR of 100% was recorded following moxidectin treatment; on the remaining 6, FECR ranged from 90% to 97.2%. After albendazole treatment, FECR was higher than 90% on 20 farms and ranged from 47.4% to 84.6% on other 5. After levamisole treatment, FECR was higher than 90% on 23 farms and equal to 47.4% and 73.7% on other 2 farms. Results indicated the presence of resistant Cooperia spp. and Haemonchus spp., especially to ivermectin; on some farms, resistance to albendazole and levamisole was also observed. (C) 2007 Elsevier B.V. All rights reserved.

Comparison of the susceptibility of Santa Ines and Ile de France ewes to nematode parasitism around parturition and during lactation

Breeds of sheep with resistance to nematode infection often display a reduced periparturient rise (PPR) in faecal egg counts (FEC) when compared with susceptible sheep. This trial was carried out to compare the resistance of Santa Ines, an indigenous Brazilian breed of sheep, and Ile de France ewes to natural infections by gastrointestinal nematodes, especially in the periparturient period. Twelve Santa lnes and 10 Ile de France ewes were estrus synchronized and then mated (December 2001). Lambing occurred from 30 April to 19 June 2002 and the lambs were weaned at 60 days of age. Faecal egg counts, packed cell volume (PCV), total plasma protein levels and peripheral eosinophils counts were determined from November 2001 to September 2002. To prevent deaths, individual treatment with anthelmintics was provided to ewes with FEC higher than 4000 eggs per gram (EPG) or with PCV lower than 21%. The percentage of Santa Ines ewes treated with anthelmintics was lower than that of Ile de France sheep. Eight of the 10 Ile de France ewes were treated, with one of them requiring four treatments, one requiring three treatments, and two requiring two treatments. The remaining four received a single treatment. In contrast, only 5 of the 12 Santa lnes ewes required treatment and for each this was done only once. The mean values of PCV were in the normal range in the Santa Ines ewes. In contrast, mean PCVs of Ile de France ewes reached a low of 24.5% in the second month after lambing and were significantly lower than Santa Ines 1 month before lambing (P < 0.05) and 2 months after lambing (P < 0.07). The mean plasma protein level was significantly lower in the Ile de France ewes in the second month after lambing (P < 0.01) coinciding with a reduction in PCV. The ewes of both breeds had high mean numbers of eosinophils in blood, which increased even further post-weaning when a marked reduction in FEC occurred. Haemonchus larvae were the most numerous genus in faecal cultures for both breeds followed by Trichostrongylus, Oesophagostomum and Cooperia. A periparturient rise in FEC was observed in both breeds. However, Santa Ines ewes showed a higher capacity to support the infection in an environment contaminated with large number of infective larvae of gastrointestinal nematodes. (C) 2004 Elsevier B.V. All rights reserved.

Vertical migration of Haemonchus contortus third stage larvae on Brachiaria decumbens grass

The present study aimed at evaluating the vertical migration of Haemonchus contortus third stage larvae (1-3) on Brachiaria decumbens grass, as well as at verifying whether larval numbers on pasture varies over the day due to climatic conditions. Feces containing H. contortus L3 were deposited on the soil in the middle of herbage which was initially 30 cm high. Seven days later, samples of different herbage strata (0-10, 10-20 and >20 cm), remaining feces and a layer of approximately 1 cm soil were collected. Tests were carried out in four periods: September 2006, December 2006, March 2007, and June 2007. Samples were collected at sunrise, mid-day, sunset, and mid-night. The humidity and temperature conditions observed in different months influenced larval migration from the feces to the grass. In September, December and March, it rained after fecal deposition on pasture, which favored migration of larvae from the feces to the herbage. Conversely, in June 2007, when there was no rainfall after fecal deposition and temperatures were lower, L3 were mainly recovered from feces. As regards the vertical migration of larvae, the numbers of H. contortus L3 in the forage strata remained relatively constant over the day. This indicates there is not a determined period in which sheep on pasture are at higher risk of infection. Finally, in all collection periods a considerable amount of third stage larvae was observed on the herbage top, which is the first plant part consumed by sheep. (C) 2008 Elsevier B.V. All rights reserved.

Environmental factors influencing the transmission of Haemonchus contortus

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Larval stages of Stenocionops furcatus (Olivier, 1791) (Decapoda : Brachyura : Majoidea) and a reappraisal of larval morphological characters for Mithracidae

Stenocionops furcatus is a spider crab found in the western Atlantic, from Georgia, USA to Rio Grande do Sul, Brazil, on sand, coral, rocks or mud bottoms from the intertidal zone to 180 m. We describe all laboratory-reared larval stages of S. furcatus obtained from the northern coast of São Paulo State, Brazil, and compare our data with existing larval descriptions for the genus and other mithracids. The larval development of S. furcatus consists of two zoeal stages and one megalopa. The durations of the first and second zoeal stage were similar to4 and 5 days respectively, the megalopa appearing 10-18 days after hatching. Our results show that the zoeae of S. furcatus differ from those of other Mithracidae by possessing four setae on the proximal lobe of the coxal endite of the maxilla, instead of five, and by the presence of mid-dorsal setae on the third abdominal somite in the second zoeal stage, which are lacking in other mithracids. Larval descriptions for Stenocionops in two previous publications were attributed to the subspecies S. furcatus coelatus from the Caribbean. Larvae from Brazilian waters closely resemble one of these accounts, suggesting that this taxon extends beyond the West Indies and that the other description represents larvae of S. furcatus furcatus. Additional morphological details, not available previously, are provided.