The geometry of unstented and stented pig common carotid artery bypass grafts

The long-term success of arterial bypass grafting with autologous saphenous veins is limited by neointimal hyperplasia (NIH), which seemingly develops preferentially at sites where hydrodynamic wall shear is low. Placement of a loose-fitting, porous stent around end-to-end, or end-to-side, autologous saphenous vein grafts on the porcine common carotid artery has been found significantly to reduce NIH, but the mechanism is unclear. In a preliminary study, we implanted autologous saphenous vein grafts bilaterally on the common carotid arteries of pigs, placing a stent around one graft and leaving the contralateral graft unstented. At sacrifice 1 month post implantation, the grafts were pressure fixed in situ and resin casts were made. Unstented graft geometry was highly irregular, with non-uniform dilatation, substantial axial lengthening, curvature, kinking, and possible long-pitch helical distortion. In contrast, stented grafts showed no major dilatation, lengthening or curvature, but there was commonly fine corrugation, occasional slight kinking or narrowing of segments, and possible long-pitch helical distortion. Axial growth of grafts against effectively tethered anastomoses could account for these changes. CFD studies are planned, using 3D MR reconstructions, on the effects of graft geometry on the flow. Abnormality of the flow could favour the development of vascular pathology, including NIH.

Systematic Engineering of Uniform, Highly Efficient, Targeted and Shielded Viral-Mimetic Nanoparticles

In the past decades, numerous types of nanomedicines have been developed for the efficient and safe delivery of nucleic acid-based drugs for cancer therapy. Given that the destination sites for nucleic acid-based drugs are inside cancer cells, delivery systems need to be both targeted and shielded in order to overcome the extracellular and intracellular barriers. One of the major obstacles that has hindered the translation of nanotechnology-based gene-delivery systems into the clinic has been the complexity of the design and assembly processes, resulting in non-uniform nanocarriers with unpredictable surface properties and efficiencies. Consequently, no product has reached the clinic yet. In order to address this shortcoming, a multifunctional targeted biopolymer is genetically engineered in one step, eliminating the need for multiple chemical conjugations. Then, by systematic modulation of the ratios of the targeted recombinant vector to PEGylated peptides of different sizes, a library of targeted-shielded viral-mimetic nanoparticles (VMNs) with diverse surface properties are assembled. Through the use of physicochemical and biological assays, targeted-shielded VMNs with remarkably high transfection efficiencies (>95%) are screened. In addition, the batch-to-batch variability of the assembled targeted-shielded VMNs in terms of uniformity and efficiency is examined and, in both cases, the coefficient of variation is calculated to be below 20%, indicating a highly reproducible and uniform system. These results provide design parameters for engineering uniform, targeted-shielded VMNs with very high cell transfection rates that exhibit the important characteristics for in vivo translation. These design parameters and principles could be used to tailor-make and assemble targeted-shielded VMNs that could deliver any nucleic acid payload to any mammalian cell type.

Universal behaviour of shock precursors in the presence of efficient cosmic ray acceleration

The self-consistent interaction between energetic particles and self-generated hydromagnetic waves in a cosmic ray pressure dominated plasma is considered. Using a three-dimensional hybrid magnetohydrodynamics (MHD)-kinetic code, which utilizes a spherical harmonic expansion of the Vlasov-Fokker-Planck equation, high-resolution simulations of the magnetic field growth including feedback on the cosmic rays are carried out. It is found that for shocks with high cosmic ray acceleration efficiency, the magnetic fields become highly disorganized, resulting in near isotropic diffusion, independent of the initial orientation of the ambient magnetic field. The possibility of sub-Bohm diffusion is demonstrated for parallel shocks, while the diffusion coefficient approaches the Bohm limit from below for oblique shocks. This universal behaviour suggests that Bohm diffusion in the root-mean-squared field inferred from observation may provide a realistic estimate for the maximum energy acceleration time-scale in young supernova remnants. Although disordered, the magnetic field is not self-similar suggesting a non-uniform energy-dependent behaviour of the energetic particle transport in the precursor. Possible indirect radiative signatures of cosmic ray driven magnetic field amplification are discussed.

Discursive Control, Non-Domination and Hegelian Recognition Theory: Marrying Pettit’s Account(s) of Freedom with a Pippinian/Brandomian Reading of Hegelian Agency

The aim of this article is to combine Pettit’s account(s) of freedom, both his work on discursive control and on non-domination, with Pippin’s and Brandom’s reinterpretation of Hegelian rational agency and the role of recognition theory within it. The benefits of combining these two theories lie, as the article hopes to show, in three findings: first, re-examining Hegelian agency in the spirit of Brandom and Pippin in combination with Pettit’s views on freedom shows clearly why and in which way a Hegelian account of rational agency can ground an attractive socio-political account of freedom; second, the reconciling of discursive control and non-domination with Hegelian agency shows how the force and scope of recognition become finally tangible, without either falling into the trap of overburdening the concept, or merely reducing it to the idea of simple respect; third, the arguments from this article also highlight the importance of freedom as non-domination and how this notion is, indeed, as Pettit himself claims, an agency-freedom which aims at successfully securing the social, political, economic and even (some) psychological conditions for free and autonomous agency.

Cold-formed steel portal frames in fire: Full-scale testing and finite element analysis

A full-scale, non-uniform natural fire test on a cold-formed steel portal frame building is described. The results of the test are used to validate a non-linear, elasto-plastic, finite element shell idealisation, for the purposes of later forming the basis of a performance-based design approach for cold-formed steel portal frames at elevated temperatures.

Sets of multiplicity and closable multipliers on group algebras

We undertake a detailed study of the sets of multiplicity in a second countable locally compact group G and their operator versions. We establish a symbolic calculus for normal completely bounded maps from the space B(L-2(G)) of bounded linear operators on L-2 (G) into the von Neumann algebra VN(G) of G and use it to show that a closed subset E subset of G is a set of multiplicity if and only if the set E* = {(s,t) is an element of G x G : ts(-1) is an element of E} is a set of operator multiplicity. Analogous results are established for M-1-sets and M-0-sets. We show that the property of being a set of multiplicity is preserved under various operations, including taking direct products, and establish an Inverse Image Theorem for such sets. We characterise the sets of finite width that are also sets of operator multiplicity, and show that every compact operator supported on a set of finite width can be approximated by sums of rank one operators supported on the same set. We show that, if G satisfies a mild approximation condition, pointwise multiplication by a given measurable function psi : G -> C defines a closable multiplier on the reduced C*-algebra G(r)*(G) of G if and only if Schur multiplication by the function N(psi): G x G -> C, given by N(psi)(s, t) = psi(ts(-1)), is a closable operator when viewed as a densely defined linear map on the space of compact operators on L-2(G). Similar results are obtained for multipliers on VN(C).

Droop setting design for multi-terminal HVDC grids considering voltage deviation impacts

In multi-terminal high voltage direct current (HVDC) grids, the widely deployed droop control strategies will cause a non-uniform voltage deviation on the power flow, which is determined by the network topology and droop settings. This voltage deviation results in an inconsistent power flow pattern when the dispatch references are changed, which could be detrimental to the operation and seamless integration of HVDC grids. In this paper, a novel droop setting design method is proposed to address this problem for a more precise power dispatch. The effects of voltage deviations on the power sharing accuracy and transmission loss are analysed. This paper shows that there is a trade-off between minimizing the voltage deviation, ensuring a proper power delivery and reducing the total transmission loss in the droop setting design. The efficacy of the proposed method is confirmed by simulation studies.

抗剪加固FRP与混凝土界面粘结性能的试验研究

In this study, 21 small beam specimens with a pre-set through-crack were tested with FRP strips bonded to the sides to study the bond behavior between shear-strengthening FRP and concrete (referred to as "the interface" for simplicity hereafter). The test parameters included the bond length, width, thickness of FRP strip and the angle between fiber orientation and crack opening direction (referred to as "fiber tensile angle" θ hereafter) on the bond behavior of the interface. Test results showed that: 1) the small beam test setup with a pre-set crack is suitable for studying the bond behavior between FRP and concrete; 2) the bond length, width, and thickness of the FRP as well as the fiber angle have significant effects on the bond strength; 3) the distribution of FRP strains along the direction perpendicular to the fiber orientation (FRP width direction) is non-uniform; this is mainly attributed to the progressive debonding of the FRP strips in the width direction, with the FRP at the location of larger crack width debonding earlier.

Estimating biomass, fishing mortality, and "total allowable discards" for surveyed non-target fish

Demersal fisheries targeting a few high-value species often catch and discard other "non-target" species. It is difficult to quantify the impact of this incidental mortality when population biomass of a non-target species is unknown. We calculate biomass for 14 demersal fish species in ICES Area VIIg (Celtic Sea) by applying species-and length-based catchability corrections to catch records from the Irish Groundfish Survey (IGFS). We then combine these biomass estimates with records of commercial discards (and landings for marketable non-target species) to calculate annual harvesting rates (HR) for each study species. Uncertainty is incorporated into estimates of both biomass andHR. Our survey-based HR estimates for cod and whiting compared well with HR-converted fishing mortality (F) estimates from analytical assessments for these two stocks. Of the non-target species tested, red gurnard (Chelidonichthys cuculus) recorded some annual HRs greater than those for cod or whiting; challenging "Pope's postulate" that F on non-target stocks in an assemblage will not exceed that on target stocks. We relate HR for each species to two corresponding maximum sustainable yield (MSY) reference levels; six non-target species (including three ray species) show annual HRs >= HRMSY. This result suggests that it may not be possible to conserve vulnerable non-target species when F is coupled to that of target species. Based on biomass, HR, and HRMSY, we estimate "total allowable catch" for each non-target species.

Extent and mechanism of phase separation during the extrusion of calcium phosphate pastes

The aim of this study was to increase understanding of the mechanism and dominant drivers influencing phase separation during ram extrusion of calcium phosphate (CaP) paste for orthopaedic applications. The liquid content of extrudate was determined, and the flow of liquid and powder phases within the syringe barrel during extrusion were observed, subject to various extrusion parameters. Increasing the initial liquid-to-powder mass ratio, LPR, (0.4-0.45), plunger rate (5-20 mm/min), and tapering the barrel exit (45°-90°) significantly reduced the extent of phase separation. Phase separation values ranged from (6.22 ± 0.69 to 18.94 ± 0.69 %). However altering needle geometry had no significant effect on phase separation. From powder tracing and liquid content determination, static zones of powder and a non-uniform liquid distribution was observed within the barrel. Measurements of extrudate and paste LPR within the barrel indicated that extrudate LPR remained constant during extrusion, while LPR of paste within the barrel decreased steadily. These observations indicate the mechanism of phase separation was located within the syringe barrel. Therefore phase separation can be attributed to either; (1) the liquid being forced downstream by an increase in pore pressure as a result of powder consolidation due to the pressure exerted by the plunger or (2) the liquid being drawn from paste within the barrel, due to suction, driven by dilation of the solids matrix at the barrel exit. Differentiating between these two mechanisms is difficult; however results obtained suggest that suction is the dominant phase separation mechanism occurring during extrusion of CaP paste.

Review of the genus Bursaphelenchus Fuchs, 1937 (Nematoda, Aphelenchida) with some conclusions on the host-parasite and vector-parasite evolution.

INTRODUCTION AND GOALS: Genus Bursaphelenchus includes several pests of the world importance for the rural economy, the most dangerous are the Bursaphelenchus xylophilus (the pinewood nematode caused decline of the pine trees in south Asia and in one spot area in Europe, Portugal, Peninsula de Setubal) and the Bursaphelenchus cocophilus, causing the decline of coco-palm plantations in Carribean and Latin American regions. The peculiarity of the host-parasite association of the genus that the nematode life cycle includes three trophic components: plant (mostly a tree), insect vector and a fungus. Goals of the presentation is to list all species of the world fauna and all efficient diagnostic characters, then create the identification tool and analyze the similarity of species and possible ways and causes of the host-parasite evolution of the group. RESULTS: Complete list of species with synonymy and a catalogue of all efficient diagnostic characters with their states, selected from papers of the most experienced taxonomists of the genus, are given for the genus Bursaphelenchus. List of known records of Bursaphelenchus species with names of natural vectors and plants and their families is given (for world pests the most important groups of trees and insects are listed). The tabular, traditional and computer-aided keys are presented. Dendrograms of species relationships (UPGMA, standard distance: mean character difference) based on all efficient taxonomic characters and separately on the spicule characters only, are given. Discussion whether the species groups are natural or purely diagnostic ones is based on the relationships dendrograms and the vector and associated plant ranges of Bursaphelenchus species; the xylophilus species group (B. xylophilus, B. abruptus, B. baujardi, B. conicaudatus, B. eroshenkii, B. fraudulentus, B. kolymensis, B. luxuriosae; B. mucronatus), the hunti group (B. hunti, B. seani, B. kevini and B. fungivorus) are probably the natural ones. CONCLUSIONS: The parasitic nematode association includes three trophic components: plant, insect vector and fungus. The initial insect-plant complex Scolytidae-Pinaceae is changeable and only in rare occasions the change of the preferred vector to Cerambycidae (the xylophilus group), Hymenoptera (the hunti group) led to formation of the natural species-groups. From the analysis it is clear that although the vector range is changeable it is comparatively more important for the evolution of the genus Bursaphelenchus than associations with plants at the family level. Data on the fungi species (3rd component in natural Bursaphelenchus associations) are insufficient for the detailed comparative analysis.

Modelo de valorização do direito desportivo resultante da formação

Nas empresas desportivas o principal ativo é o direito desportivo sobre o jogador profissional. O nosso estudo debruça-se no resultante da formação. Começámos por verificar que o direito desportivo preenche os requisitos para ser reconhecido como ativo intangível. Posteriormente analisámos os relatórios e contas de clubes europeus e de clubes brasileiros de modo a identificarmos semelhanças e diferenças ao nível contabilístico dos ativos intangíveis resultantes da formação, um dos nossos objetivos. Verificámos que a principal diferença reside no não reconhecimento do direito desportivo resultante da formação pelos primeiros, contrariamente à prática verificada nos clubes brasileiros. No cenário atual, pelo menos, os clubes europeus não proporcionam informação plena e a comparabilidade entre clubes encontra-se comprometida. Por conseguinte, outro dos nossos objetivos é propor um modelo que permita valorizar com fiabilidade o direito desportivo resultante da formação. A conceção do modelo teve o auxílio dos clubes portugueses e brasileiros, através da resposta a um inquérito dirigido a clubes europeus e brasileiros. Esta metodologia possibilitou, igualmente, confirmar conclusões resultantes da análise da informação contabilística elaborada pelos clubes e identificar outros pontos de contacto e de afastamento entre os clubes relativamente a jogadores formados internamente e ao reconhecimento inicial do direito desportivo. Concluímos que em Portugal existe informação contabilística incompleta sobre os jogadores formados internamente, dado os clubes portugueses considerarem não existir um critério de valorização fiável, e sobre os jogadores que chegam em fim de contrato. Por outro lado, todos os clubes brasileiros respondentes valorizam e reconhecem o direito desportivo resultante da formação como ativo intangível com base nos encargos com a formação do jogador. Por fim, apresentamos a nossa proposta de modelo assente no custo de formação, com a aplicação do método dos centros de gastos. Os componentes incluídos tiveram em conta a opinião dos clubes, tendo posteriormente sido efetuada a análise de clusters e a seleção final de acordo com a IAS 38 da UE. A nossa proposta foi validada junto de agentes com conhecimento e experiência sobre o fenómeno em estudo através de entrevista.

The effect of conservation measures on the spatial and temporal variation of rocky fish assemblages in the Arrábida Marine Park

Marine protected areas (MPAs) have been widely proposed for conservation purposes and as a tool for fisheries management. The Arrábida Marine Park is the first MPA in continental Portugal having a management plan, fully implemented since 2009. The main objective of this study was to evaluate the effect of protection measures on rocky reef fish assemblages and target invertebrates through before-after and control-effect (no-take vs. fished areas) underwater visual surveys and analysis of landings trends. Second, we used surveys before, during and after implementation of the management plan to understand fishers‟ preferences for fishing grounds and adaptation to the new rules, and evaluated the reserve effect through analysis of both ecological responses and fishing effort density. Third, we identified the main oceanographic drivers influencing the structure of reef fish assemblages and predicted the community structure for the last 50 years, in light of climatic change. Overall results suggest positive responses in biomass but not yet in numbers of some commercial species, with no effects on non-target species. The reserve effect is reinforced by the increase in landings of commercial species, despite increased fishing effort density in some areas, especially with octopus traps. Fishing grounds are mainly chosen based on the distribution of target species and associated habitats, but distance to port, weather conditions and safety also influence fishers‟ choices. Moreover, different fisheries respond differently to the protection measures, and within each fishery, individual fishers show distinct strategies, with some operating in a broader area whereas others keep preferred territories. Our results also show that wind stress and temperature are the main oceanographic drivers for rocky reef fish assemblages, with tropicalization of assemblages and polewards movements of species over the last 50 years consistent with temperature trends. We believe this study provides significant lessons for marine conservation and management of coastal systems.