869 resultados para sustainable urban place-habitats
Resumo:
The research work has dealt with the study of new catalytic processes for the synthesis of fine chemicals belonging to the class of phenolics, namely 2-phenoxyethanol and hydroxytyrosol. The two synthetic procedures investigated have the advantages of being much closer to the Green Chemistry principles than those currently used industrially. In both cases, the challenge was that of finding catalysts and methods which led to the production of less waste, and used less hazardous chemicals, safer solvents, and reusable heterogeneous catalysts. In the case of 2-phenoxyethanol, the process investigated involves the use of ethylene carbonate (EC) as the reactant for phenol O-hydroxyethylation, in place of ethylene oxide. Besides being a safer reactant, the major advantage of using EC in the new synthesis is the better selectivity to the desired product achieved. Moreover, the solid catalyst based on Na-mordenite was fully recyclable. The reaction mechanism and the effect of the Si/Al ratio in the mordenite were investigated. In the case of hydroxytyrosol, which is one of the most powerful natural antioxidants, a new synthetic procedure was investigated; in fact, the method currently employed, the hydrolysis of oleuropein, an ester extracted from the waste water processing of the olive, makes use of large amounts of organic solvents (hexane, ethyl acetate), and involves several expensive steps of purification. The synthesis procedure set up involves first the reaction between catechol and 2,2-dimethoxyacetaldehyde, followed by the one-pot reduction of the intermediate to give the desired product. Both steps were optimized, in terms of catalyst used, and of reaction conditions, that allowed to reach ca 70% yield in each step. The reaction mechanism was investigated and elucidated. During a 3-month period spent at the University of Valencia (with Prof. A. Corma’s group), a process for the production of diesel additives (2,5-bis(propoxymethyl)furan) from fructose has been investigated.
Resumo:
Nowadays the environmental issues and the climatic change play fundamental roles in the design of urban spaces. Our cities are growing in size, many times only following immediate needs without a long-term vision. Consequently, the sustainable development has become not only an ethical but also a strategic need: we can no longer afford an uncontrolled urban expansion. One serious effect of the territory industrialisation process is the increase of urban air and surfaces temperatures compared to the outlying rural surroundings. This difference in temperature is what constitutes an urban heat island (UHI). The purpose of this study is to provide a clarification on the role of urban surfacing materials in the thermal dynamics of an urban space, resulting in useful indications and advices in mitigating UHI. With this aim, 4 coloured concrete bricks were tested, measuring their emissivity and building up their heat release curves using infrared thermography. Two emissivity evaluation procedures were carried out and subsequently put in comparison. Samples performances were assessed, and the influence of the colour on the thermal behaviour was investigated. In addition, some external pavements were analysed. Albedo and emissivity parameters were evaluated in order to understand their thermal behaviour in different conditions. Surfaces temperatures were recorded in a one-day measurements campaign. ENVI-met software was used to simulate how the tested materials would behave in two typical urban scenarios: a urban canyon and a urban heat basin. Improvements they can carry to the urban microclimate were investigated. Emissivities obtained for the bricks ranged between 0.92 and 0.97, suggesting a limited influence of the colour on this parameter. Nonetheless, white concrete brick showed the best thermal performance, whilst the black one the worst; red and yellow ones performed pretty identical intermediate trends. De facto, colours affected the overall thermal behaviour. Emissivity parameter was measured in the outdoor work, getting (as expected) high values for the asphalts. Albedo measurements, conducted with a sunshine pyranometer, proved the improving effect given by the yellow paint in terms of solar reflection, and the bad influence of haze on the measurement accuracy. ENVI-met simulations gave a demonstration on the effectiveness in thermal improving of some tested materials. In particular, results showed good performances for white bricks and granite in the heat basin scenario, and painted concrete and macadam in the urban canyon scenario. These materials can be considered valuable solutions in UHI mitigation.
Resumo:
Urban agriculture is a phenomenon that can be observed world-wide, particularly in cities of devel- oping countries. It is contributing significantly to food security and food safety and has sustained livelihood of the urban and peri-urban low income dwe llers in developing countries for many years. Population increase due to rural-urban migration and natural - formal as well as informal - urbani- sation are competing with urban farming for available space and scarce water resources. A mul- titemporal and multisensoral urban change analysis over the period of 25 years (1982-2007) was performed in order to measure and visualise the urban expansion along the Kizinga and Mzinga valley in the south of Dar Es Salaam. Airphotos and VHR satellite data were analysed by using a combination of a composition of anisotropic textural measures and spectral information. The study revealed that unplanned built-up area is expanding continuously, and vegetation covers and agricultural lands decline at a fast rate. The validation showed that the overall classification accuracy varied depending on the database. The extracted built-up areas were used for visual in- terpretation mapping purposes and served as information source for another research project. The maps visualise an urban congestion and expansion of nearly 18% of the total analysed area that had taken place in the Kizinga valley between 1982 and 2007. The same development can be ob- served in the less developed and more remote Mzinga valley between 1981 and 2002. Both areas underwent fast changes where land prices still tend to go up and an influx of people both from rural and urban areas continuously increase the density with the consequence of increasing multiple land use interests.
Resumo:
This paper aims to deepen the search for ecosystem-like concepts in indigenous societies by highlighting the importance of place names used by Quechua indigenous farmers from the central Bolivian Andes. Villagers from two communities in the Tunari Mountain Range were asked to list, describe, map and categorize the places they knew on their community’s territory. Results show that place names capture spatially explicit units which integrate biotic and abiotic nature and humans, and that there is an emphasis on topographic terms, highlighting the importance of geodiversity. Farmers’ perspectives differ from the classical view of ecosystems because they ‘humanize’ places, considering them as living beings with agency. Consequently, they do not make a distinction between natural and cultural heritage. Their perspective of the environment is that of a personalized, dynamic relationship with the elements of the natural world that are perceived as living entities. A practical implication of the findings for sustainable development is that since places names make the links between people and the elements of the landscape, toponymy is a tool for ecosystem management rooted in indigenous knowledge. Because place names refer to holistic units linked with people’s experience and spatially explicit, they can be used as an entry point to implement an intercultural dialogue for more sustainable land management.
Resumo:
The present paper discusses a conceptual, methodological and practical framework within which the limitations of the conventional notion of natural resource management (NRM) can be overcome. NRM is understood as the application of scientific ecological knowledge to resource management. By including a consideration of the normative imperatives that arise from scientific ecological knowledge and submitting them to public scrutiny, ‘sustainable management of natural resources’ can be recontextualised as ‘sustainable governance of natural resources’. This in turn makes it possible to place the politically neutralising discourse of ‘management’ in a space for wider societal debate, in which the different actors involved can deliberate and negotiate the norms, rules and power relations related to natural resource use and sustainable development. The transformation of sustainable management into sustainable governance of natural resources can be conceptualised as a social learning process involving scientists, experts, politicians and local actors, and their corresponding scientific and non-scientific knowledges. The social learning process is the result of what Habermas has described as ‘communicative action’, in contrast to ‘strategic action’. Sustainable governance of natural resources thus requires a new space for communicative action aiming at shared, intersubjectively validated definitions of actual situations and the goals and means required for transforming current norms, rules and power relations in order to achieve sustainable development. Case studies from rural India, Bolivia and Mali explore the potentials and limitations for broadening communicative action through an intensification of social learning processes at the interface of local and external knowledge. Key factors that enable or hinder the transformation of sustainable management into sustainable governance of natural resources through social learning processes and communicative action are discussed.
Resumo:
The demand for consumer goods in the developing world continues to rise as populations and economies grow. As designers, manufacturers, and consumers look for ways to address this growing demand, many are considering the possibilities of 3D printing. Due to 3D printing’s flexibility and relative mobility, it is speculated that 3D printing could help to meet the growing demands of the developing world. While the merits and challenges of distributed manufacturing with 3D printing have been presented, little work has been done to determine the types of products that would be appropriate for such manufacturing. Inspired by the author’s two years of Peace Corps service in the Tanzania and the need for specialty equipment for various projects during that time, an in-depth literature search is undertaken to better understand and summarize the process and capabilities of 3D printing. Human-centered design considerations are developed to focus on the product desirability, the technical feasibility, and the financial viability of using 3D printing within Tanzania. Beginning with concerns of what Tanzanian consumers desire, many concerns later arise in regards to the feasibility of creating products that would be sufficient in strength and quality for the demands of developing world consumers. It is only after these concerns are addressed that the viability of products can be evaluated from an economic perspective. The larger impacts of a product beyond its use are vital in determining how it will affect the social, economic, and environmental well-being of a developing nation such as Tanzania. Thus technology specific criteria are necessary for assessing and quantifying the broader impacts that a 3D-printed product can have within its ecosystem, and appropriate criteria are developed for this purpose. Both sets of criteria are then demonstrated and tested while evaluating the desirability, feasibility, viability, and sustainability of printing a piece of equipment required for the author’s Peace Corps service: a set of Vernier calipers. Required for science educators throughout the country, specialty equipment such as calipers initially appear to be an ideal candidate for 3D printing, though ultimately the printing of calipers is not recommended due to current restrictions in the technology. By examining more specific challenges and opportunities of the products 3D printing can produce, it can be better determined what place 3D printing will have in manufacturing for the developing world. Furthermore, the considerations outlined in this paper could be adapted for other manufacturing technologies and regions of the world, as human centered design and sustainability will be critical in determining how to supply the developing world with the consumer goods it demands.
Resumo:
Competing water demands for household consumption as well as the production of food, energy, and other uses pose challenges for water supply and sustainable development in many parts of the world. Designing creative strategies and learning processes for sustainable water governance is thus of prime importance. While this need is uncontested, suitable approaches still have to be found. In this article we present and evaluate a conceptual approach to scenario building aimed at transdisciplinary learning for sustainable water governance. The approach combines normative, explorative, and participatory scenario elements. This combination allows for adequate consideration of stakeholders’ and scientists’ systems, target, and transformation knowledge. Application of the approach in the MontanAqua project in the Swiss Alps confirmed its high potential for co-producing new knowledge and establishing a meaningful and deliberative dialogue between all actors involved. The iterative and combined approach ensured that stakeholders’ knowledge was adequately captured, fed into scientific analysis, and brought back to stakeholders in several cycles, thereby facilitating learning and co-production of new knowledge relevant for both stakeholders and scientists. However, the approach also revealed a number of constraints, including the enormous flexibility required of stakeholders and scientists in order for them to truly engage in the co-production of new knowledge. Overall, the study showed that shifts from strategic to communicative action are possible in an environment of mutual trust. This ultimately depends on creating conditions of interaction that place scientists’ and stakeholders’ knowledge on an equal footing.
Resumo:
There is broad international agreement that investment flows to the agricultural sector in developing countries need to be increased. But there is also agreement that such investments need to be sustainable. For being sustainable, they must not only be beneficial to the public economy, but also to rural households and to the environment in the short and the long run. Whether sustainable investments take place, not least depends on the legal framework within which these investments are situated. This is true for the domestic legal frameworks of both the home country and of the host country of the investment. But also the international legal frameworks in which home and host states are embedded set either positive or negative incentives for investments to be sustainable. The paper presents an overview on regulatory frameworks which come to focus in this regard. It then elaborates on international agricultural trade regulation, by assuming that sustainable investments in agriculture presume a ‘sustainable trade regime’. By doing so, the paper presents parts of the debate about a sustainable agricultural trade regime, as it has been resumed and further developed by the author in recent years. Key words. Agricultural sector, sustainable investment, regulatory environment, sustainable trade regime.
Resumo:
This Strategy and Action Plan was written within the framework of the project on Sustainable Land Management in the High Pamir and Pamir-Alai Mountains (PALM). PALM is an integrated transboundary initiative of the governments of the Kyrgyz Republic and the Republic of Tajikistan. It aims to address the interlinked problems of land degradation and poverty within a region that is one of Central Asia’s crucial sources of freshwater and a location of biodiversity hotspots. The project is executed by the Committee on Environment Protection in Tajikistan and the National Center for Mountain Regions Development in Kyrgyzstan, with fi nancial support from the Global Environment Facility (GEF) and other donors. The United Nations Environment Programme (UNEP) is the GEF Implementing Agency for the project, and the United Nations University (UNU) is the International Executing Agency. This Strategy and Action Plan integrates the work of three main teams of experts, namely the Pamir-Alai Transboundary Strategy and Action Plan (PATSAP) team, the Legal Task Forces, and a team of Natural Disaster Risk specialists. The PATSAP team was coordinated by the Centre for Development and Environment (CDE), University of Bern, Switzerland. The Legal Task Force was led by the Australian Centre for Agriculture and Law of the University of New England (UNE), and responsibility for the Natural Disaster Risk assessment was with the Central- Asian Institute of Applied Geosciences (CAIAG) in Bishkek, Kyrgyzstan. The development of the strategy took place from June 2009 to October 2010. The activities included fi eld study tours for updating the information base with fi rst-hand information from the local level, coordination meetings with actors from the region, and two multi-level stakeholder forums conducted in Khorog and Osh to identify priorities and to collect ideas for concrete action plans. The baseline information collected for the Strategy and Action Plan has been compiled by the experts and made available as reports1. A joint multi-level stakeholder forum was conducted in Jirgitol, Tajikistan, for in-depth discussion of the transboundary aspects. In August 2010, the draft Strategy and Action Plan was distributed among local, national, and international actors for consultation, and their comments were discussed at feedback forums in Khorog and Bishkek. This Strategy and Action Plan is intended as a recommendation. Nevertheless, it proposes concrete mechanisms for implementing the proposed sustainable land management (SLM) activities: The Regional Natural Resources Governance Framework provides the legal and policy concepts, principles, and regulatory requirements needed to create an enabling environment for SLM in the High Pamir and Pamir-Alai region at the transboundary, national, and local levels. The priority directions outlined provide a framework for the elaboration of rayon-level strategies and for strategies on specifi c topics (forestry, livestock, etc.), as well as for further development of government programmes and international projects. The action plans may serve as a pool of concrete ideas, which can be taken up by diff erent institutions and in smaller or larger projects. Finally, this document provides a basis for the elaboration and signing of targeted cooperation agreements on land use and management between the leaders of Osh oblast (Kyrgyz Republic), Gorno Badakhshan Autonomous Oblast, and Jirgitol rayon (Republic of Tajikistan).
Resumo:
Urban agriculture is a phenomenon that can be observed world-wide, particularly in cities of devel-oping countries. It is contributing significantly to food security and food safety and has sustained livelihood of the urban and peri-urban low income dwellers in developing countries for many years. Population increase due to rural-urban migration and natural, coupled with formal as well as infor-mal urbanization are competing with urban farming for available space and scarce water resources. A multitemporal multisensoral urban change analysis over the period of 25 years (1982-2007) was performed in order to measure and visualize the urban expansion along the Kizinga and Mzinga valley in the South of Dar es Salaam. Airphotos and VHR satellite data were analyzed by using a combination of a composition of anisotropic textural measures and spectral information. The study revealed that unplanned built-up area is expanding continuously and vegetation covers and agricultural lands decline at a fast rate. The validation showed that the overall classification accuracy varied depending on the database. The extracted built-up areas were used for visual in-terpretation mapping purposes and served as information source for another research project. The maps visualize an urban congestion and expansion of nearly 18% of the total analyzed area that had taken place in the Kizinga valley between 1982 and 2007. The same development can be ob-served in the less developed and more remote Mzinga valley between 1981 and 2002. Both areas underwent fast changes where land prices still tend to go up and an influx of people both from rural and urban areas continuously increase density with the consequence of increasing multiple land use interests.
Resumo:
In land systems, equitably managing trade-offs between planetary boundaries and human development needs represents a grand challenge in sustainability oriented initiatives. Informing such initiatives requires knowledge about the nexus between land use, poverty, and environment. This paper presents results from Lao PDR, where we combined nationwide spatial data on land use types and the environmental state of landscapes with village-level poverty indicators. Our analysis reveals two general but contrasting trends. First, landscapes with paddy or permanent agriculture allow a greater number of people to live in less poverty but come at the price of a decrease in natural vegetation cover. Second, people practising extensive swidden agriculture and living in intact environments are often better off than people in degraded paddy or permanent agriculture. As poverty rates within different landscape types vary more than between landscape types, we cannot stipulate a land use–poverty–environment nexus. However, the distinct spatial patterns or configurations of these rates point to other important factors at play. Drawing on ethnicity as a proximate factor for endogenous development potentials and accessibility as a proximate factor for external influences, we further explore these linkages. Ethnicity is strongly related to poverty in all land use types almost independently of accessibility, implying that social distance outweighs geographic or physical distance. In turn, accessibility, almost a precondition for poverty alleviation, is mainly beneficial to ethnic majority groups and people living in paddy or permanent agriculture. These groups are able to translate improved accessibility into poverty alleviation. Our results show that the concurrence of external influences with local—highly contextual—development potentials is key to shaping outcomes of the land use–poverty–environment nexus. By addressing such leverage points, these findings help guide more effective development interventions. At the same time, they point to the need in land change science to better integrate the understanding of place-based land indicators with process-based drivers of land use change.
Resumo:
Following the collapse of the communist regime in 1989, Bulgaria has undergone dramatic political, economic and social transformations. The transition process of the past two decades was characterized by several reforms to support democratisation of the political system and the functioning of a free-market economy. Since 1992, Switzerland has been active in Bulgaria providing assistance to the transition process, with support to Sustainable Management of Natural Resources (SMNR) starting in 1995. The SMNR Capitalisation of Experiences (CapEx) took place between March and September 2007, in the context of SDC phasing out its programmes in Bulgaria by the end of 2007 due to the country’s accession to the European Union. The CapEx exercise has culminated in the identification of 17 lessons learned. In the view of the CapEx team, many of these lessons are relevant for countries that are in the process of joining the EU, facing similar democratisation challenges as Bulgaria. Overall, the Swiss SMNR projects have been effective entry points to support areas that are crucial to democratic transitions, namely participation in public goods management, decentralisation, human capacity development in research and management, and preparation for EU membership. The specificity of the Swiss support stems from an approach that combines a long-term commitment with a clear thematic focus (forestry, biodiversity conservation and organic agriculture). The multistakeholder approach and diversification of support between local, regional and national levels are also important elements that contributed to make a difference in relation to other donors supporting the Bulgarian transition. At the institutional level, there are a number of challenges where the contribution of SMNR activities was only modest, namely improving the legal framework and creating more transparency and accountability, both of which are time and resource-consuming processes. In addition, the emergence of competent and sustainable non-government organisations (NGOs) is a complex process that requires support to membership based organisations, a challenge that was hardly met in the case of SMNR. Finally, reform of government institutions involved in management of natural resources is difficult to achieve via project support only, as it requires leverage and commitment at the level of policy dialogue. At the programme management level, the CapEx team notes that corruption was not systematically addressed in SMNR projects, indicating that more attention should be given to this issue at the outset of any new project.
Resumo:
This report presents background material used by participants in a joint Ethiopian-Swiss study tour through the north-central highlands of Ethiopia. The main theme of the tour was 'land transformation and sustainable development'. The tour took place from 4-20 September 2006, starting in Addis Abeba and continuing through North Shewa, Wello, Gonder and Gojam. This report is a structured compilation of information gathered by MSc candidates and scientists from the University of Bern prior to the study tour, and supplemented with daily reports by all participants after the study tour was completed.
Resumo:
This article examines the Slow Food and Slow City movement as an alternative approach to urban development that focuses on local resources, economic and cultural strengths, and the unique historical context of a town. Following recent discussions about the politics of alternative economic development, the study examines the Slow City movement as a strategy to address the interdependencies between goals for economic, environmental, and equitable urban development. In particular, we draw on the examples of two Slow Cities in Germany—Waldkirch and Hersbruck, and show how these towns are retooling their urban policies. The study is placed in the context of alternative urban development agendas as opposed to corporate-centered development. We conclude the article by offering some remarks about the institutional and political attributes of successful Slow Cities and the transferability of the concept.