Association of self-reported physical activity and performance in the physical fitness assessment among Airmen

The U.S. Air Force, as with the other branches of military services, has physical fitness standards imposed on their personnel. These standards ensure a healthy and fit combat force. To meet these standards, Airmen have to maintain a certain level of physical activity in their lifestyle. Objective. This was a cross sectional (prevalence) study to evaluate the association of Airmen's self-reported physical activity and their performance in the Air Force Physical Fitness Assessment in 2007. Methods. The self-reported physical activity data were obtained from the Air Force Web Health Assessment (AF WEB HA), a web-based health questionnaire completed by the Airmen during their annual Preventive Health Assessment. The physical activity levels were categorized as having met or not having met the Centers for Disease Control and Prevention (CDC) and the American College of Sports Medicine (ACSM) physical activity recommendations. Physical Fitness scores were collected from the Air Force Fitness Management System (AFFMS), a repository of physical fitness test data. Results. There were 49,029 Airmen who answered the AF WEB HA in 2007 and also took their physical fitness test. 94.4% (n = 46,304) of Airmen met the recommended physical activity guidelines and 79.9% (n = 39,178) passed the fitness test. Total Airmen who both met the physical activity recommendations and passed the fitness test was 75.6% (n = 37,088). Airmen who did not meet the activity recommendations and also failed the fitness test totaled 635 or 1.3% of the study group. The Mantel-Haenszel Chi-Square analysis of the data on the activity levels and the physical fitness test relationship was the following χ2 = 18.52, df 1, and p = <0.0001. The Odds Ratio (OR) was 1.22 (95% CI 1.12, 1.34). Conclusion. The study determined that there was a positive association between Airmen's self-reported physical activity and their performance in the physical fitness assessment.^

The feasibility of self-report advance directives among elderly patients with cognitive impairment

The central objective of this dissertation was to determine the feasibility of self-completed advance directives (AD) in older persons suffering from mild and moderate stages of dementia. This was accomplished by identifying differences in ability to complete AD among elderly subjects with increasing degrees of dementia and cognitive incompetence. Secondary objectives were to describe and compare advance directives completed by elders and identified proxy decision makers. Secondary objectives were accomplished by measuring the agreement between advance directives completed by proxy and elder, and comparing that agreement across groups defined by the elder's cognitive status. This cross-sectional study employed a structured interview to elicit AD, followed by a similar interview with a proxy decision maker identified by the elder. A stratified sampling scheme recruited elders with normal cognition, mild, and moderate forms of dementia using the Mini Mental-State Exam (MMSE). The Hopkins Competency Assessment Test (HCAT) was used for evaluation of competency to make medical decisions. Analysis was conducted on "between group" (non-demented $\leftrightarrow$ mild dementia $\leftrightarrow$ moderate dementia, and competent $\leftrightarrow$ incompetent) and "within group" (elder $\leftrightarrow$ family member) variation.^ The 118 elderly subjects interviewed were generally male, Caucasian, and of low socioeconomic status. Mean age was 77. Overall, elders preferred a "trial of therapy" regarding AD rather than to "always receive the therapy". No intervention was refused outright more often than it was accepted. A test-retest of elders' AD revealed stable responses. Eleven logic checks measured appropriateness of AD responses independent of preference. No difference was found in logic error rates between elders grouped by MMSE or HCAT. Agreement between proxy and elder responses showed significant dissimilarity, indicating that proxies were not making the same medical decisions as the elders.^ Conclusions based on these data are: (1) Self reporting AD is feasible among elders showing signs of cognitive impairment and they should be given all opportunities to complete advance directives, (2) variation in preferences for advance directives in cognitively impaired elders should not be assumed to be the effects of their impairment alone, (3) proxies do not appear to forego life-prolonging interventions in the face of increasing impairment in their ward, however, their advance directives choices are frequently not those of the elder they represent. ^

Safety door for the unloading mechanism of self-unloading wagons

A safety door for the discharge opening of a selfunloading wagon is disclosed herein. The wagon includes a material receiving box having a first conveyor therein for conveying the material towards one end thereof. A cross conveyor is mounted at the one end of the box for conveying the material outwardly from the box through the lower end of a discharge opening formed in the side of the box. A material beater means is rotatably mounted in the box above the cross conveyor. The safety door extends across the discharge opening to prevent the operator from reaching inwardly through the discharge opening. The safety door is self-closing and is opened by the material being discharged outwardly through the discharge opening.

Adriaan Rademaker, Sophrosyne and the Rhetoric of Self-Restraint. Polysemy and Persuasive Use an Ancient Greek Value Term

Fil: Saravia de Grossi, María Inés. Universidad Nacional de La Plata. Facultad de Humanidades y Ciencias de la Educación; Argentina.

Adriaan Rademaker, Sophrosyne and the Rhetoric of Self-Restraint. Polysemy and Persuasive Use an Ancient Greek Value Term

Fil: Saravia de Grossi, María Inés. Universidad Nacional de La Plata. Facultad de Humanidades y Ciencias de la Educación; Argentina.

An Institutional Analysis of Environmental Pollution Disputes in Taiwan: Cases of 'Self-Relief'

During the late 1980s and early 1990s in Taiwan, people's protests against environmental pollution often took the form of "self-relief," meaning that they attempted to fight polluters using their own resources, without relying on legal or administrative procedures. Why did such an extreme form of disputes become so widespread? What institutional changes did these movements bring about? These questions are analyzed using the analytical framework of "law and economics." Our research shows that "self-relief" functioned to a certain extent as a means of realizing quick compensation for victims, and for reflecting the opinions of local people concerning development projects; in addition, it served to promote the formulation of law and administrative systems. However, as it was based on direct negotiations between the parties concerned, the outcome of each dispute only reflected the transient balance of forces, and the experience gained in negotiations was not accumulated as a social norm.

Formless as Water, Flaming as a Fire-Some observations on the Theory and Practice of Self-Determination

The concept of national self-determination is a highly contested concept from very outset. It is partly due to its dual parentage, namely nationalism and liberalism. Prior to 1945 it was only a political concept without legal binding. With the incorporation of the principle in the UN Charter it was universalized and legalized. However, there were two competing interpretations at the UN based on de-colonization and representative government. How to define self and what really determined remain highly controversial. How to reconcile the international norm of sovereignty of state and self determination of people became more complex problem with the tide of secessionist movements based on ethno-nationalism. The concept of internal self-determination came as a compromise; but it is also very vague and harbors a wide range of interpretations.

Evaluation of the mechanical properties of self compacting concrete using current estimating models. Estimating the modulus of elasticity, tensile strength, and modulus of rupture of self compacting concrete

This study includes an analysis of the applicability of current models used for estimating the mechanical properties of conventional concrete to self-compacting concrete. The mechanical properties evaluated are: modulus of elasticity, tensile strength, and modulus of rupture. An extensive database which included the dosifications and the mechanical properties of 627 mixtures from 138 different references, was used. The models considered are: ACI, EC-2, NZS 3101:2006 (New Zealand code) and the CSA A23.3-04 (Canadian code). The precision in estimating the modulus of elasticity and tensile strength is acceptable for all models; however, all models are less precise in estimating the modulus of rupture.

Simulation of a mechanical thrombectomy device based in the use of self-expandable stents for the blood clots extraction

Recently, we have presented some studies concerning the analysis, design and optimization of one experimental device developed in the UK - GPTAD - which has been designed to remove blood clots without the need to make contact with the clot itself, thereby potentially reducing the risk of problems such as downstream embolisation. Based on the idea of a modification of the previous device, in this work, we present a model based in the use of stents like the SolitaireTM FR, which is in contact with the clot itself. In the case of such devices, the stent is self-expandable and the extraction of the blood clot is faciliatated by the stent, which must be inside the clot. Such stents are generally inserted in position by using the guidewire inserted into the catheter. This type of modeling could potentially be useful in showing how the blood clot is moved by the various different forces involved. The modelling has been undertaken by analyzing the resistances, compliances and inertances effects. We model an artery and blood clot for range of forces for the guidewire. In each case we determine the interaction between blood clot, stent and artery.

Mechanical properties of self-consolidating concrete using conventional concrete models

The objective of this study is to analyze the applicability of current models used for estimating the mechanical properties of conventional concrete to self-consolidating concrete (SCC). The mechanical properties evaluated are modulus of elasticity, tensile strength,and modulus of rupture. As part of the study, it was necessary to build an extensive database that included the proportions and mechanical properties of 627 mixtures from 138 different references. The same models that are currently used for calculating the mechanical properties of conventional concrete were applied to SCC to evaluate their applicability to this type of concrete. The models considered are the ACI 318, ACI 363R, and EC2. These are the most commonly used models worldwide. In the first part of the study, the overall behavior and adaptability of the different models to SCC is evaluated. The specific characterization parameters for each concrete mixture are used to calculate the various mechanical properties applying the different estimation models. The second part of the analysis consists of comparing the experimental results of all the mixtures included in the database with the estimated results to evaluate the applicability of these models to SCC. Various statistical procedures, such as regression analysis and residual analysis, are used to compare the predicted and measured properties. It terms of general applicability, the evaluated models are suitable for estimating the modulus of elasticity, tensile strength, and modulus of rupture of SCC. These models have a rather low sensitivity, however, and adjust well only to mean values. This is because the models use the compressive strength as the main variable to characterize the concrete and do not consider other variables that affect these properties.

Assessment of self-combustion risks for solid fuels (POSTER)

Every solid fuel has a tendency to react with oxygen, a fact that constitutes the basis of their ability to oxidation and energy intake for combustion, but that poses a risk when it occurs in an uncontrolled manner. When the slow oxidation phenomenon produces more heat than can be evacuated, the result is a heating process, which promotes combustion reactions, primarily fuel oxidation, and a progressive increase in temperature.

Application of self-organizing techniques for the distribution of heterogeneous multi-tasks in multi-robot systems

This paper focuses on the general problem of coordinating of multi-robot systems, more specifically, it addresses the self-election of heterogeneous and specialized tasks by autonomous robots. In this regard, it has proposed experimenting with two different techniques based chiefly on selforganization and emergence biologically inspired, by applying response threshold models as well as ant colony optimization. Under this approach it can speak of multi-tasks selection instead of multi-tasks allocation, that means, as the agents or robots select the tasks instead of being assigned a task by a central controller. The key element in these algorithms is the estimation of the stimuli and the adaptive update of the thresholds. This means that each robot performs this estimate locally depending on the load or the number of pending tasks to be performed. It has evaluated the robustness of the algorithms, perturbing the number of pending loads to simulate the robot’s error in estimating the real number of pending tasks and also the dynamic generation of loads through time. The paper ends with a critical discussion of experimental results.

Height control of self-assembled quantum dots

The capping of epitaxially grown Quantum Dots (QD) is a key process in the fabrication of devices based on these nanostructures because capping can significantly affect the QDs morphology [3]. We have studied the QD morphology after capping in order to better understand the role of the capping process. We have grown real structures and compared the QD morphology obtained by cross-sectional Scanning Tunneling Microscopy (X-STM) with the morphology of QDs that were virtually grown in simulations based on a Kinetic Monte Carlo model (KMC) [1].

Manufacturing of self-passivating tungsten based alloys by different powder metallurgical routes

Self-passivating tungsten based alloys will provide a major safety advantage compared to pure tungsten when used as first wall armor of future fusion reactors, due to the formation of a protective oxide layer which prevents the formation of volatile and radioactive WO3 in case of a loss of coolant accident with simultaneous air ingress. Bulk WCr10Ti2 alloys were manufactured by two different powder metallurgical routes: (1) mechanical alloying (MA) followed by hot isostatic pressing (HIP) of metallic capsules, and (2) MA, compaction, pressureless sintering in H2 and subsequent HIPing without encapsulation. Both routes resulted in fully dense materials with homogeneous microstructure and grain sizes of 300 nm and 1 μm, respectively. The content of impurities remained unchanged after HIP, but it increased after sintering due to binder residue. It was not possible to produce large samples by route (2) due to difficulties in the uniaxial compaction stage. Flexural strength and fracture toughness measured on samples produced by route (1) revealed a ductile-to-brittle-transition temperature (DBTT) of about 950 °C. The strength increased from room temperature to 800 °C, decreasing significantly in the plastic region. An increase of fracture toughness is observed around the DBTT.