Caracterización geológica de la región de enlace entre la Cuenca de Bransfield y la Dorsal Sur de Scotia (Antártida)

La Dorsal Sur de Scotia (DSS) constituye une frontera de placas transformante con sentido senestral, que limita las placas de Scotia, al norte, y Antártica, al sur. Durante la campaña de geología y geofísica marinas 'Scotia 92', realizada en Febrero de 1992 a bordo del BIO Hespérides, se ha estudiado su extremo occidental y sectores próximos a la Cuenca de Bransfield, entre el margen nor-occidental de la Península Antártica y las islas Shetland del Sur, Elefante y Orcadas del Sur. Al norte y sur de la DSS se desarrollan las cuencas de Scotia y de Powell, respectivamente. Los datos de sísmica de multicanal, magnetismo y gravimetna obtenidos muestran caracteristicas diferenciales entre ambas cuencas. La morfoestructura de la DSS, formada por dos crestas paralelas separadas por una profunda depresión axial, ha sido recubierta mediante perfilaje de multihaz con el sistema SIMRAD EM-12 en una área de 50 x 100 km. La batimetría resultante ha permitido reconocer en detalle las caracteristicas de una depresión de más de 5.300 m de profundidad y de 10 a 30 km de anchura, bautizada como Fosa Hespérides. En ella se aprecia la existencia de dos famílias de lineaciones, la primera de dirección E-W y paralela al límite de placas, y la segunda de dirección NW-SE. La primera acomodaría el movimiento cizallante regional mientras que la segunda estaría asociada con una componente extensional probablemente relacionada con la dirección de la Cuenca de Bransfield. La forma romboédrica de la fosa está determinada por la interacción de ambas famílias de lineaciones. Teniendo en cuenta que el límite de placas transcurre entre las dos crestas, interpretamos la Fosa Hespérides como una cuenca de pull-apart desarrollada como consecuencia del movimiento de cizalla a lo largo de la DSS.

Microwave spectrometry for the Evaluation of the structural integrity of metallic stents

Purpose: To assess the feasibility of a method based on microwave spectrometry to detect structural distortions of metallic stents in open air conditions and envisage the prospects of this approach toward possible medical applicability for the evaluation of implanted stents. Methods: Microwave absorbance spectra between 2.0 and 18.0 GHz were acquired in open air for the characterization of a set of commercial stents using a specifically design setup. Rotating each sample over 360º, 2D absorbance diagrams were generated as a function of frequency and rotation angle. To check our approach for detecting changes in stent length (fracture) and diameter (recoil), two specific tests were performed in open air. Finally, with a few adjustments, this same system provides 2D absorbance diagrams of stents immersed in a water-based phantom, this time over a bandwidth ranging from 0.2 to 1.8 GHz. Results: The authors show that metallic stents exhibit characteristic resonant frequencies in their microwave absorbance spectra in open air which depend on their length and, as a result, may reflect the occurrence of structural distortions. These resonances can be understood considering that such devices behave like dipole antennas in terms of microwave scattering. From fracture tests, the authors infer that microwave spectrometry provides signs of presence of Type I to Type IV stent fractures and allows in particular a quantitative evaluation of Type III and Type IV fractures. Recoil tests show that microwave spectrometry seems able to provide some quantitative assessment of diametrical shrinkage, but only if it involves longitudinal shortening. Finally, the authors observe that the resonant frequencies of stents placed inside the phantom shift down with respect to the corresponding open air frequencies, as it should be expected considering the increase of dielectric permittivity from air to water. Conclusions: The evaluation of stent resonant frequencies provided by microwave spectrometry allows detection and some quantitative assessment of stent fracture and recoil in open air conditions. Resonances of stents immersed in water can be also detected and their characteristic frequencies are in good agreement with theoretical estimates. Although these are promising results, further verifica tion in a more relevant phantom is required in order to foresee the real potential of this approach.

An inertial sensor-based system for spatio-temporal analysis in classic cross-country skiing diagonal technique.

The present study proposes a method based on ski fixed inertial sensors to automatically compute spatio-temporal parameters (phase durations, cycle speed and cycle length) for the diagonal stride in classical cross-country skiing. The proposed system was validated against a marker-based motion capture system during indoor treadmill skiing. Skiing movement of 10 junior to world-cup athletes was measured for four different conditions. The accuracy (i.e. median error) and precision (i.e. interquartile range of error) of the system was below 6ms for cycle duration and ski thrust duration and below 35ms for pole push duration. Cycle speed precision (accuracy) was below 0.1m/s (0.005m/s) and cycle length precision (accuracy) was below 0.15m (0.005m). The system was sensitive to changes of conditions and was accurate enough to detect significant differences reported in previous studies. Since capture volume is not limited and setup is simple, the system would be well suited for outdoor measurements on snow.

Fiscal sustainability and fiscal shocks in a dollarized and oil-exporting country: Ecuador

This paper investigates the fiscal sustainability of an emerging, dollarized, oil-exporting country: Ecuador. A cointegrated VAR approach is adopted in testing, first, if the intertemporal budget constraint is satisfied in Ecuador and, second, in identifying the permanent and transitory shocks that affect a fiscal policy characterized by inertia and a heavy dependence on oil revenues. Following confirmation that the debt-GDP ratio does not place the Ecuadorian budget under any pressure, we reformulate the model and identify two forces that push the fiscal system out of equilibrium, namely, economic activity and oil revenues implemented in the government budget. We argue that Ecuador needs to recover control of its monetary policy and to promote the diversification of its economy in order that non-oil tax revenues can replace oil revenues as a pushing force. Finally, we calculate quarterly elasticities of tax revenues with respect to Ecuador’s GDP and that of eight Eurozone countries. We illustrate graphically how the Eurozone countries with low positive or high negative elasticities’ levels suffer debt problems after the crisis. This finding emphasizes the pressing need for Ecuador to strengthen the connection between its tax revenues and output, and also suggests that the convergence of these elasticities in the Eurozone might contribute to the success of an eventually future fiscal union.

What are the success factors for Spanish textile firms? An exploratory multiple-case study

The objective of this article is to identify differential traits of successful SMEs in comparison to average SME firms in the textile and clothing sector. The method used is the multiple case-study of 12 firms based on qualitative and quantitative data obtained by means of in-depth interviews. Building on recent academic literature, we use four main dimensions that may explain success: i) knowledge generation (R&D) and acquisition; ii) innovation activity; iii) product and market characteristics and iv) strategic characteristics. Our results indicate that a higher R&D intensity and knowledge acquisition do not explain success. The main differential characteristic is that successful firms have a higher level of innovation activity, since innovation is their strategic priority, being a result of perceiving the key success factors of their markets differently. From the analysis it also follows that the prevalent strategy of successful firms is the niche strategy, with a demand pull focus, and a high proximity to the customer

On the longitudinal component of paraxial fields

The analysis of paraxial Gaussian beams features in most undergraduate courses in laser physics, advanced optics and photonics. These beams provide a simple model of the field generated in the resonant cavities of lasers, thus constituting a basic element for understanding laser theory. Usually, uniformly polarized beams are considered in the analytical calculations, with the electric field vibrating at normal planes to the propagation direction. However, such paraxial fields do not verify the Maxwell equations. In this paper we discuss how to overcome this apparent contradiction and evaluate the longitudinal component that any paraxial Gaussian beam should exhibit. Despite the fact that the assumption of a purely transverse paraxial field is useful and accurate, the inclusion of the above issue in the program helps students to clarify the importance of the electromagnetic nature of light, thus providing a more complete understanding of the paraxial approach.

Fiber-reinforced Composite as Oral Implant Material. Experimental studies of glass fiber and bioactive glass in vitro and in vivo

Fiber-reinforced composite as oral implant material: Experimental studies of glass fiber and bioactive glass in vitro and in vivo Department of Prosthetic Dentistry and Biomaterials Science, Institute of Dentistry, University of Turku, Turku, Finland 2008. Biocompatibility and mechanical properties are important variables that need to be determined when new materials are considered for medical implants. Special emphasis was placed on these characteristics in the present work, which aimed to investigate the potential of fiber-reinforced composite (FRC) material as an oral implant. Furthermore, the purpose of this study was to explore the effect of bioactive glass (BAG) on osseointegration of FRC implants. The biocompatibility and mechanical properties of FRC implants were studied both in vitro and in vivo. The mechanical properties of the bulk FRC implant were tested with a cantilever bending test, torsional test and push-out test. The biocompatibility was first evaluated with osteoblast cells cultured on FRC substrates. Bone bonding was determined with the mechanical push-out test and histological as well as histomorplanimetric evaluation. Implant surface was characterized with SEM and EDS analysis. The results of these studies showed that FRC implants can withstand the static load values comparably to titanium. Threaded FRC implants had significantly higher push-out strength than the threaded titanium implants. Cell culture study revealed no cytotoxic effect of FRC materials on the osteoblast-like-cells. Addition of BAG particles enhanced cell proliferation and mineralization of the FRC substrates The in vivo study showed that FRC implants can withstand static loading until failure without fracture. The results also suggest that the FRC implant is biocompatible in bone. The biological behavior of FRC was comparable to that of titanium after 4 and 12 weeks of implantation. Furthermore, addition of BAG to FRC implant increases peri-implant osteogenesis and bone maturation.

Nanoantenna enhanced emission of lightharvesting complex 2: the role of resonance, polarization, and radiative and non-radiative rates

Nanoantennae show potential for photosynthesis research for two reasons; first by spatially confining light for experiments which require high spatial resolution, and second by enhancing the photon emission of single light-harvesting complexes. For effective use of nanoantennae a detailed understanding of the interaction between the nanoantenna and the light-harvesting complex is required. Here we report how the excitation and emission of multiple purple bacterial LH2s (light-harvesting complex 2) are controlled by single gold nanorod antennae. LH2 complexes were chemically attached to such antennae, and the antenna length was systematically varied to tune the resonance with respect to the LH2 absorption and emission. There are three main findings. (i) The polarization of the LH2 emission is fully controlled by the resonant nanoantenna. (ii) The largest fluorescence enhancement, of 23 times, is reached for excitation with light at λ = 850 nm, polarized along the long antenna-axis of the resonant antenna. The excitation enhancement is found to be 6 times, while the emission efficiency is increased 3.6 times. (iii) The fluorescence lifetime of LH2 depends strongly on the antenna length, with shortest lifetimes of [similar]40 ps for the resonant antenna. The lifetime shortening arises from an 11 times resonant enhancement of the radiative rate, together with a 2–3 times increase of the non-radiative rate, compared to the off-resonant antenna. The observed length dependence of radiative and non-radiative rate enhancement is in good agreement with simulations. Overall this work gives a complete picture of how the excitation and emission of multi-pigment light-harvesting complexes are influenced by a dipole nanoantenna.

The seasonal evolution of high vertical–mode internal waves in a deep reservoir

The causal mechanism and seasonal evolution of the internal wave field in a deep, warm, monomictic reservoirare examined through the analysis of field observations and numerical techniques. The study period extends fromthe onset of thermal stratification in the spring until midsummer in 2005. During this time, wind forcing wasperiodic, with a period of 24 h (typical of land–sea breezes), and the thermal structure in the lake wascharacterized by the presence of a shallow surface layer overlying a thick metalimnion, typical of small to mediumsized reservoirs with deep outtakes. Basin-scale internal seiches of high vertical mode (ranging from mode V3 toV5) were observed in the metalimnion. The structure of the dominant modes of oscillation changed asstratification evolved on seasonal timescales, but in all cases, their periods were close to that of the local windforcing (i.e., 24 h), suggesting a resonant response. Nonresonant oscillatory modes of type V1 and V2 becamedominant after large frontal events, which disrupted the diurnal periodicity of the wind forcing

Coatings on Composites

Polymer based composite materials coated with thin layers of wear resistant materials have been proposed as replacements for steel components for certain applications with the advantage of reduced mass. Magnetron sputtered coatings can be successfully deposited on composite materials. Nevertheless there are number of issues which must be addressed such as limited temperature, which the composite can withstand because of the epoxy binder which is used, the adhesion of the coating to the composite and the limited mechanical support, the hard coating can obtain from the relatively soft epoxy. We have investigated the deposition of chromium nitride, titanium carbide and titanium doped DLC coatings on carbon fibre reinforced composites and various polymers. The adhesion of the coatings has been studied by the pull-off adhesion tester. In general, the failure mechanism has been noticed to be due to the cohesive failure for a wide range of conditions. The wear behavior of the coatings has been noticed to be complicated. Wear tests on coated composites have shown that where the reinforcing fibres are near the surface, the composite samples do not perform well due to breakage of the fibres from the polymer matrix. A fibre free surface has been noticed to improve the wear resistance.

Äitiys kulttuurisina odotuksina

Tutkimuksen kohteena ovat äitiydelle tuotetut kulttuuriset odotukset, joita tarkastellaan kahdella yhteiskunnallisella keskustelufoorumilla. Tutkimuksessa tarkastellaan yhtäältä lastensuojelun perhetyössä toimivien ammattilaisten ja toisaalta median puhetta äitiydestä. Tutkimuksen tavoitteena on tehdä näkyväksi vaihtoehtoisia tapoja konstruoida äitiyttä hyvänä tai riittämättömänä sekä haastaa pohtimaan erilaisten tulkintojen perusteita ja seurauksia lastensuojelutyössä. Kulttuuriset, äitiyttä koskevat odotukset vaikuttavat myös siihen, miten äitiys henkilökohtaisella tasolla koetaan. Äitiyden kulttuurista määrittelyä analysoidaan kahdesta tekstiaineistosta. Yhtenä aineistona ovat Stakesissa vuonna 1999 toteutetun Perhetyöprojektin yhteydessä kerätyt, lastensuojelussa toimivien perhetyöammattilaisten ryhmäkeskustelut. Toisena aineistona on projektin ajankohtana ilmestyneistä suomalaisista naisten- ja perhelehdistä (Kotiliesi, Anna, Kaksplus) kerätyt äitien haastattelut. Tutkimuksessa kysytään 1) Mihin ammattilaisten äitejä koskeva huolipuhe kiinnittyy ja millaisia kulttuurisia äitiyden odotuksia se konstruoi? 2) Millaisia äitiyden odotuksia median äitihaastattelut konstruoivat? 3) Millaisen äitiyden odotushorisontin nämä puhekäytännöt yhdessä tuottavat? Analyysin teoreettis-metodologisina kulmakivinä ovat sosiaalinen konstruktionismi ja feministinen tietokäsitys. Analyysimenetelmänä on laadullinen, aineistojen ehdoilla etenevä, feministisesti ja kriittisesti sävyttynyt lukutapa, joka hyödyntää teemoittelun, diskurssianalyysin ja feministisen metodologian ideoita ja käsitteitä. Analysoitavana olevissa keskusteluissa äitiyttä konstruoidaan lapsen tarpeiden (ammattilaiset) ja naisen tarpeiden (media) näkökulmista. Ammattilaiset puhuvat tilanteista, joissa äitien toiminta rikkoo kulttuurista hyvän äidin kuvaa, vaarantaa lapsen hyvinvointia ja äitiyteen joudutaan puuttumaan ammatillisesti. Ammattilaisten tulkinnat kuvaavat taitavaa lapsen edun näkökulmasta tehtyä arviointia, jonka kiintopisteenä ovat äidit yksilöllisine ominaisuuksineen ja piirteineen. Ammatillisen huolipuheen keskiössä ovat äidin vuorovaikutussuhteet sekä äidin tunteet, käyttäytyminen ja asenteet. Riittävää äitiyttä konstruoi kodin luominen, kiintymyssuhteen rakentaminen ja lapsen ensisijaiseksi asettaminen. Sen sijaan vaikuttaa siltä, ettei äitiyden arviointia juurikaan tehdä suhteessa äidin muihin identiteetteihin tai äitiyden toteuttamisen kontekstiin. Paikoin ammattilaisten tulkinnat heijastavat myös stereotyyppisiä ja idealistisia odotuksia, joita vasten äitiyttä arvioidaan. Tällaiset piirteet voivat kertoa siitä, että äitien avuntarpeet jäävät lastensuojelutyössä kohtaamatta ja ymmärtämättä. Mediapuhe äitiydestä käydään naiseuden ja äitiyden mallien antamisen kontekstissa. Puheen keskiössä ovat mediajulkisuuteen päässeiden naisten äidiksi tuloon ja äitiyden toteuttamiseen liittyvät valinnat ja käyttäytyminen. Mediapuhe on puhetta kulttuuristen ja ammatillisten äitiyden odotusten rikkomisesta, uudelleen tulkinnasta ja niiden muovaamisesta itselle sopiviksi. Mediapuheessa hyvää äitiyttä konstruoi äidin itsenäisyys ja oma aika, sosiaalisen elämän rikkaus, ammatillinen identiteetti ja persoonalliset valinnat. Aineistojen kautta rakentuu moninaisten ja ristiriitaisten, äitejä eri suuntaan vetävien kulttuuristen odotusten kirjo. Odotukset jäsentyvät neljälle ulottuvuudelle: 1) lapselle omistautuva – itseään toteuttava, 2) emotionaalinen side – rationaalinen tehtävä, 3) odotuksia toteuttava – omaehtoinen, 4) itsenäinen - äitiyttä jakava. Äitiyden toteuttaminen kulttuurisesti ”oikein” on näiden odotusten välissä tasapainoilua. Ulottuvuuksien kautta esille tulevat kaksoisviestit voivat heikentää äitien itsetuntoa, tuottaa riittämättömyyden tunteita tai yllyttää suorittamaan äitiyttä. Myös äitiyden ammatillinen tukeminen edellyttää tasapainoilua, jottei äitejä idealisoida tai syyllistetä kulttuurisia odotuksia vasten.

Caracterització del temps de vol en relació amb variables biomecàniques de l’estirada en l’arrencada d’halterofília

L’objecte del present estudi és caracteritzar el temps de vol (Tv) de la fase aèria en l’exercici d’arrencada en halterofília. Es descriu el seu comportament en funció de l’increment progressiu de la càrrega i en relació a variables biomecàniques de l’estirada, així com la seva evolució en un cicle d’entrenament. Es va fer un test màxim de càrregues progressives amb set halterofilistes (n = 7) de competició. Mitjançant els sistemes de valoració Musclelab i Chronojump es van registrar els valors de: força (F), potència (P), velocitat (V), pic de velocitat (pV) i alçada relativa (Hrel ) de la barra en l’estirada, al costat del Tv del desplaçament dels peus de l’aixecador a l’entrada sota la barra. Es va observar una moderada correlació negativa (r = –0,561; p < 0,01) entre el Tv i la càrrega màxima del test (%1RMT). No es van trobar correlacions significatives per al Tv respecte a la resta de variables analitzades. El Tv disminuïa amb l’increment de la càrrega en rangs submàxims, i era de natura aleatòria amb l’ocupació de càrregues màximes. En un subgrup de la mostra (n = 4) es van valorar les mateixes variables passades vuit setmanes. El Tv, la Pmàx i el pV suggereixen ser variables suficientment sensibles per monitoritzar els canvis generats per l’entrenament en vuit setmanes, encara que la reduïda dimensió mostral no va permetre aconseguir diferències significatives. Aquests resultats destaquen la possibilitat de considerar el Tv i la P com a mesures de control en l’entrenament d’halterofilistes, preferentment en l’ús de càrregues submàximes.

Chaotic dynamics of electric-field domains in periodically driven superlattices

Self-sustained time-dependent current oscillations under dc voltage bias have been observed in recent experiments on n-doped semiconductor superlattices with sequential resonant tunneling. The current oscillations are caused by the motion and recycling of the domain wall separating low- and high-electric-field regions of the superlattice, as the analysis of a discrete drift model shows and experimental evidence supports. Numerical simulation shows that different nonlinear dynamical regimes of the domain wall appear when an external microwave signal is superimposed on the dc bias and its driving frequency and driving amplitude vary. On the frequency-amplitude parameter plane, there are regions of entrainment and quasiperiodicity forming Arnold tongues. Chaos is demonstrated to appear at the boundaries of the tongues and in the regions where they overlap. Coexistence of up to four electric-field domains randomly nucleated in space is detected under ac+dc driving.

Highly eccentric hip-hop solutions of the 2N

We show the existence of families of hip-hop solutions in the equal-mass 2N-body problem which are close to highly eccentric planar elliptic homographic motions of 2N bodies plus small perpendicular non-harmonic oscillations. By introducing a parameter ϵ, the homographic motion and the small amplitude oscillations can be uncoupled into a purely Keplerian homographic motion of fixed period and a vertical oscillation described by a Hill type equation. Small changes in the eccentricity induce large variations in the period of the perpendicular oscillation and give rise, via a Bolzano argument, to resonant periodic solutions of the uncoupled system in a rotating frame. For small ϵ ≠ 0, the topological transversality persists and Brouwer's fixed point theorem shows the existence of this kind of solutions in the full system

Non-resorbable glass fibre-reinforced composite with porous surface as bone substitute material: Experimental studies in vitro and in vivo focused on bone-implant interface

The development of load-bearing osseous implant with desired mechanical and surface properties in order to promote incorporation with bone and to eliminate risk of bone resorption and implant failure is a very challenging task. Bone formation and resoption processes depend on the mechanical environment. Certain stress/strain conditions are required to promote new bone growth and to prevent bone mass loss. Conventional metallic implants with high stiffness carry most of the load and the surrounding bone becomes virtually unloaded and inactive. Fibre-reinforced composites offer an interesting alternative to metallic implants, because their mechanical properties can be tailored to be equal to those of bone, by the careful selection of matrix polymer, type of fibres, fibre volume fraction, orientation and length. Successful load transfer at bone-implant interface requires proper fixation between the bone and implant. One promising method to promote fixation is to prepare implants with porous surface. Bone ingrowth into porous surface structure stabilises the system and improves clinical success of the implant. The experimental part of this work was focused on polymethyl methacrylate (PMMA) -based composites with dense load-bearing core and porous surface. Three-dimensionally randomly orientated chopped glass fibres were used to reinforce the composite. A method to fabricate those composites was developed by a solvent treatment technique and some characterisations concerning the functionality of the surface structure were made in vitro and in vivo. Scanning electron microscope observations revealed that the pore size and interconnective porous architecture of the surface layer of the fibre-reinforced composite (FRC) could be optimal for bone ingrowth. Microhardness measurements showed that the solvent treatment did not have an effect on the mechanical properties of the load-bearing core. A push-out test, using dental stone as a bone model material, revealed that short glass fibre-reinforced porous surface layer is strong enough to carry load. Unreacted monomers can cause the chemical necrosis of the tissue, but the levels of leachable resisidual monomers were considerably lower than those found in chemically cured fibre-reinforced dentures and in modified acrylic bone cements. Animal experiments proved that surface porous FRC implant can enhance fixation between bone and FRC. New bone ingrowth into the pores was detected and strong interlocking between bone and the implant was achieved.